Decomposition of three halophytes in different habitats of an eastern scheldt salt marsh

Summary A 20.5-month study was undertaken to determine detrital processing of the halophytesSpartina anglica, Elytrigia pungens, andHalimione portulacoides in three different habitats of an estuarine salt marsh in the South-West Netherlands. Decomposition was measured using litter-bags of three different mesh sizes to partition the effects of different faunal groups on decomposition. From April 1980 through October 1981 litter-bags were sampled regulary from a creek, the upper marsh, and from a plant-debris belt on the higher marsh. Dry weights and nutritive values were measured and animals were counted. Mainly rates of loss are reported here. Zonal differences were significant. At first, decomposition in the creek was most rapid. After two months the processes in the creek slowed down because of the trapping of silt by the bags, which probably simulated the natural course of the decomposition process in the water. Decomposition on the marsh followed the most regular pattern, while in the plant-debris belt the pattern was very irregular. Population dynamics of microfaunal organisms supported these findings. In the plant-debris belts loss rates seem to be higher than on the marsh, because of the influence of detritivorous macrofaunal organisms. The loss rates of the three plant species differed significantly.Halimione decomposed fastest, especially in the beginning, and in the plant-debris habitat. On the upper marsh and in the plant-debris belt the loss rates ofSpartina seem to be a little higher than those ofElytrigia.Communication No. 233, Delta Institute for Hydrobiological Research, Yerseke, The Netherlands.     

The distribution of aquatic oligochaetes in the fenland area of N.W. Overijssel (The Netherlands)

A synoptic study of the aquatic ecosystems in the Dutch province of Overijssel revealed the presence of 33 oligochaete taxa in the fendland area of N.W. Overijssel. The material was collected at 101 sampling sites in 1981. Oligochaetes were grouped by means of a normal and inverse cluster analysis. Although most oligochaetes are quite biquitous, differences in occurrence and abundance were observed and related to minor differences in environmental parameters.     

Oligochaetes and eutrophication; an experiment over four years in outdoor mesocosms

Eight experimental ditch mesocosms were used to study the effect of eutrophication over four years. The experimental ditches had a sand or clay bottom. The ditches were treated with additions of phosphorus, phosphorus and nitrogen, or without additions (controls). Oligochaetes were sampled by deploying trays with substratum for colonization over twenty weeks. Both the important variables phosphorus, nitrogen and oxygen as well as the oligochaete species and numbers are presented. The effects of nutrient additions on phosphorus, nitrogen and oxygen concentrations were described together with changes in oligochaete species composition and numbers. The results were further analyzed by redundancy analysis (RDA). In the clay-lined ditches nutrient addition coincided with fluctuation in oxygen concentration. The higher the nutrient addition levels the longer the period of oxygen depletion became. During oxygen depletion the number of oligochaetes was strongly reduced or even became zero. The low nutrient status of the sandy bed in the sand-lined ditches slowed down the rate of colonization. Only a few tubificids were collected. Eutrophication effects were only observed at the highest nutrient addition level. Considerable variation is attributed to stochastic factors in the sand-lined ditches. Whether oligochaete species were present was related to the length of the colonization period. The substratum composition and food together with oxygen regime decided whether they become more or less abundant in ditches. Large-scale mesocosm experiments require time to develop. Only after the first colonization period variables of species presences and abundances can be employed to detect changes associated with eutrophication. Oligochaetes can be used to measure colonization as well as eutrophication processes.     

Typology of macrofaunal assemblages: a tool for the management of running waters in The Netherlands

A survey was carried out at 156 sites, situated in streams in the province of Overijssel (The Netherlands), to describe the macroinvertebrate assemblages and their environments. Fifty-six environmental variables were measured once at each sampling site. The main aim was to describe a typology of stream for this region.Different multivariate analysis techniques (clustering and ordination) were used in combination with ecological information on individual taxa to derive and describe site groups in terms of taxonomic composition and mean environmental conditions. The resulting site groups were termed cenotypes.Eleven cenotypes were distinguished. Differences between cenotypes were attributed to (combinations of) environmental key factors, namely, dimensions (width and depth), morphological (profile shape) and hydraulic stream characteristics, duration of drought and load of organic material.The typology offers a basis to be used for regional stream management and nature conservation. Efforts to improve stream ecosystems should be directed at the physical and hydraulic conditions.Typological studies are needed (especially in semi-natural landscapes) if we are to better understand, manage and conserve freshwater biota.     

Macrofaunal community types in ponds and small lakes (Overijssel,The Netherlands)

A survey was carried out at 157 sites, situated in pools and small lakes in the province of Overijssel (The Netherlands), to describe the macro-invertebrate community and their environment. A total of 61 environmental viriables was measured at each sampling site. The main aim was to described a regional ecological typology of ponds and small lakes. Multivariate analysis techniques are appropriate in data analysis for typological purposes. Different multivariate analysis techniques (FLEXCLUS, NODES, DCCA, PCA) were used in combination with ecological information on individual taxa to derive and describe site groups in terms of taxon composition and mean environmental conditions. The resulting site groups were termed cenotypes. Nine cenotypes were distinguished among the ponds and small lakes. The main differences between the cenotypes were related to duration of drought, acidity, morphology and nutrient load. In particular, the four cenotypes within the group of stagnant, pH-neutral ponds/lakes showed an overlap in taxon composition. These cenotypes represent a web-shaped continuum dominated by dimensions (relation of width to depth), nutrient load, and bottom composition (especially mesotrophic peat). The most important anthropogenic processes are acidification, eutrophication, and changes in the original hydrology.     

The relative influence of catchment, riparian corridor, and reach-scale anthropogenic pressures on fish and macroinvertebrate assemblages in French rivers

This study compares the relative influences of physiography and anthropogenic pressures on river biota at catchment, riparian corridor, and reach scales. Environmental data, catchment and riparian corridor land use, anthropogenic modifications and biological data were compiled for 301 French sites sampled from 2005 to 2008. First, relationships between anthropogenic pressures and fish and macroinvertebrate assemblages were analysed using redundancy analysis. Second, the influences of physiography and the three scales of human pressures on biological assemblages were measured using variance partitioning. Distributions of fish and macroinvertebrate taxa along the pressure gradients agreed with bio-ecological knowledge. At the reach scale, assemblage variability among the 301 French sites was related to the presence of an impoundment and to poor water quality, while at larger scales it was linked to a gradient from forest to agricultural covers. In addition, a large proportion of the explained variability in assemblage composition was related to complex interactions among factors (~40%) and to physiographic variables (~30%). Furthermore, our results highlight that catchment land use better reflects local water quality impairments than hydromorphological degradations. Finally, this study supports the idea that human pressure effects on river communities are linked at several spatial scales and must be considered jointly.     

Frictional heating of total hip implants. Part 1: measurements in patients

Hip implants heat up due to friction during long lasting, high loading activities like walking. Thermal damage in the surrounding soft and hard tissues and deteriorated lubrication of synovial fluid could contribute to implant loosening. The goal of this study was to determine the implant temperatures in vivo under varying conditions. Temperatures and contact forces in the joints were measured in seven joints of five patients using instrumented prostheses with alumina ceramic heads and telemetry data transmission. The peak temperature in implants with polyethylene cups rose up to 43.1 degrees C after an hour of walking but varied considerably individually. Even higher temperatures at the joints are probable for patients with higher body weight or while jogging. The peak temperature was lower with a ceramic cup, showing the influence of friction in the joint. During cycling the peak temperatures were lower than during walking, proving the effect of force magnitudes on the produced heat. However, no positive correlation was found between force magnitude and maximum temperature during walking. Other individual parameters than just the joint force influence the implant temperatures. Based on the obtained data and the available literature about thermal damage of biological tissues a detrimental effect of friction induced heat on the stability of hip implants cannot be excluded. Because the potential risk for an individual patient cannot be foreseen, the use and improvement of low friction implant materials is important.     

Natural and manipulated populations of the treehole mosquito, Ochlerotatus triseriatus, at its northernmost range limit in southern Ontario, Canada.

Ochlerotatus triseriatus, the eastern treehole mosquito, reaches its northernmost range limit in the extreme southeast of Canada. As a known vector of West Nile and La Crosse encephalitis viruses and a potential vector of eastern equine encephalitis, its population biology is of interest. In southern Ontario, high larval densities occur in urban woodlots within sugar maple and American beech treehole communities comprising rotifers, nematode worms, mites, other dipterans, and scirtid beetles. Treehole water was characterized by low dissolved oxygen levels and seasonally variable pH and temperature, with the latter being most influential on local populations. Densities were significantly higher (up to 503 larvae 100 ml(-1)) in tree holes close to the forest floor (<1 m) and in experimental tree holes seeded with autumn-shed maple leaves as opposed to leaves of black oak and beech. In this locality, weekly sampling showed Oc. triseriatus to be multivoltine, with mass egg hatching beginning under coldwater (<10 degrees C) conditions in March/April, and thereafter producing three successful generations with a possible, less successful fourth in late summer. Some 1st instar larvae were present in water as cold as 0.7 degree C. Compared with larval psychodids living in the same tree hole, population losses of Oc. triseriatus due to washout during major rainfall events were negligible despite high flowthrough of water derived from stemflow.     

Mixed-mode loading of the cement-bone interface: a finite element study

While including the cement-bone interface of complete cemented hip reconstructions is crucial to correctly capture their response, its modelling is often overly simplified. In this study, the mechanical mixed-mode response of the cement-bone interface is investigated, taking into account the effects of the well-defined microstructure that characterises the interface. Computed tomography-based plain strain finite element analyses models of the cement-bone interface are built and loaded in multiple directions. Periodic boundaries are considered and the failure of the cement and bone fractions by cracking of the bulk components are included. The results compare favourably with experimental observations. Surprisingly, the analyses reveal that under shear loading no failure occurs and considerable normal compression is generated to prevent interface dilation. Reaction forces, crack patterns and stress fields provide more insight into the mixed-mode failure process. Moreover, the cement-bone interface analyses provide details which can serve as a basis for the development of a cohesive law.     

Implementation of asymmetric yielding in case-specific finite element models improves the prediction of femoral fractures

Although asymmetric yielding in bone is widely shown in experimental studies, previous case-specific non-linear finite element (FE) studies have mainly adopted material behaviour using the Von Mises yield criterion (VMYC), assuming equal bone strength in tension and compression. In this study, it was verified that asymmetric yielding in FE models can be captured using the Drucker-Prager yield criterion (DPYC), and can provide better results than simulations using the VMYC. A sensitivity analysis on parameters defining the DPYC (i.e. the degree of yield asymmetry and the yield stress settings) was performed, focusing on the effect on bone failure. In this study, the implementation of a larger degree of yield asymmetry improved the prediction of the fracture location; variations in the yield stress mainly affected the predicted failure force. We conclude that the implementation of asymmetric yielding in case-specific FE models improves the prediction of femoral bone strength.