In vitro assessment of the toxicity of metal compounds

A review of in vitro mutagenesis assessment of metal compounds in mammalian and nonmammalian test systems has been compiled. Prokaryotic assays are ineffective or inconsistent in their detection of most metals as mutagens, with the notable exception of hexavalent chromium. Mammalian assay systems appear to be similarly inappropriate for the screening of metal compounds based upon the limited number of studies that have employed those compounds having known carcinogenic activity. Although of limited value as screening tests for the detection of potentially carcinogenic metal compounds, the well-characterized in vitro mutagenesis systems may prove to be of significant value as a means to elucidate mechanisms of metal genotoxicity.     

Trace elements in rock salt and their bioavailability estimated from solubility in acid

In this study, 18 partly commercially available samples of rock salt from Austria, Germany, Pakistan, Poland, Switzerland, and Ukraine were investigated with respect to their content of trace elements using instrumental neutron activation analysis. Elements detected were Al, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, Hf, La, Mn, Na, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, and Zn, some of them only in individual cases. An estimation of the bioavailability of these trace elements was performed by dissolving an equivalent of the sodium chloride samples in diluted hydrochloric acid (simulating stomach acid), filtering off the insoluble components, and analyzing the evaporated filtrate. It could be shown that in most cases bioactive trace elements like Fe can be found in rock salt in the form of almost insoluble compounds and are therefore not significantly bioavailable, whereas thorium, for example, was partly bioavailable in two cases. A significant contribution to the recommended daily intake of metal trace elements by using rock salt for nutrition can be excluded.     

Changes in calmodulin level and cAMP-dependent protein kinase activity during epididymal maturation of ram spermatozoa

Calmodulin concentration and cAMP-dependent protein kinase activity were simultaneously determined on ram spermatozoa collected by cannulation of successive segments of the epididymal tubule. Epididymal transit was characterized on one hand by an overall decrease in the calmodulin level and on the other by a dramatic rise in the cAMP-dependent protein kinase activity. In contrast to the calmodulin level, the cAMP-dependent protein kinase activity was correlated with the acquisition of flagellar beat. No further alterations in the level of these two proteins could be detected as spermatozoa acquired progressive motility.     

Entropy-driven polymerization of protein from the E66 strain of tobacco mosaic virus

Protein of the tobacco mosaic virus mutant E66 has lysine replacing asparagine of the type strain, vulgare, at position 140. Thus, E66 protein should have one more positive or one less net negative charge than vulgare at pH 6 to 7. To investigate the effect of charge, a comparative study of the polymerization of E66 and vulgare proteins at pH 6.0, 6.2, 6.4, 6.6, and 6.8 at ionic strengths 0.15, 0.10, and 0.05 was made by turbidimetry. Polymerization of E66 protein always proceeded at a lower temperature than vulgare. However, the extent of polymerization was much lower in E66, especially at the higher ionic strengths. Sedimentation velocity results paralleled those from turbidity measurements in that E66 protein polymerizes at lower temperatures than vulgare; the 20 S component is more abundant in E66 protein. Osmotic pressure measurements also show that E66 protein is more polymerized than vulgare, especially at lower pH values. Hydrogen ion titrations of E66 protein were carried out from pH 8 to 5 and back to pH 8 in 0.10 m KCl at three temperatures, 4, 10, and 15 °C. These titrations were reversible when carried out slowly. The isoionic point is near pH 5; thus the charge at pH 7.5 is ?3. The reversible titration results were correlated with the aggregates present at the various pH values and temperatures, determined from the areas under the schlieren peaks in sedimentation velocity experiments. It is found that hydrogen ion binding at the three pH values is correlated with the disappearance of the smallest aggregates and is independent of the type of higher polymer formed. To investigate the effect of ionic strength and pH on the characteristic temperature corresponding to an optical density increment of 0.01 by the method used previously for vulgare, two sets of turbidity measurements were carried out. In the first one the ionic strength was changed from 0.025 to 0.15 in increments of 0.025 at pH 6.0 and 6.4. In the other set, the ionic strength was kept constant at 0.10 and the pH changed from 5.9 to 6.7 in increments of 0.1 pH units. When the analysis of these data was carried out, $\text{Δ}\text{H}{}^1\text{= 30}\text{kcal/mol}$ was obtained. For the salting out constant a value of 1.7 was found, compared to 2.2 for vulgare, a result consistent with the fact that E66 should be less hydrophobic than vulgare. The electrical work term ΔW_el also turns out to be about one-half that for vulgare, which is expected from the lower net negative charge on E66 protein.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

Genome‐wide scans to detect positive selection in Large White and Tongcheng pigs

Due to the direction, intensity, duration and consistency of genetic selection, especially recent artificial selection, the production performance of domestic pigs has been greatly changed. Therefore, we reasoned that there must be footprints or selection signatures that had been left during domestication. In this study, with porcine 60K BeadChip genotyping data from both commercial Large White and local Chinese Tongcheng pigs, we calculated the extended haplotype homozygosity values of the two breeds using the long‐range haplotype method to detect selection signatures. We found 34 candidate regions, including 61 known genes, from Large White pigs and 25 regions comprising 57 known genes from Tongcheng pigs. Many selection signatures were found on SSC1, SSC4, SSC7 and SSC14 regions in both populations. According to quantitative trait loci and network pathway analyses, most of the regions and genes were linked to growth, reproduction and immune responses. In addition, the average genetic differentiation coefficient F_ST was 0.254, which means that there had already been a significant differentiation between the breeds. The findings from this study can contribute to further research on molecular mechanisms of pig evolution and domestication and also provide valuable references for improvement of their breeding and cultivation.