Comparison of hinge microflow fields of bileaflet mechanical heart valves implanted in different sinus shape and downstream geometry

The characterization of the bileaflet mechanical heart valves (BMHVs) hinge microflow fields is a crucial step in heart valve engineering. Earlier in vitro studies of BMHV hinge flow at the aorta position in idealized straight pipes have shown that the aortic sinus shapes and sizes may have a direct impact on hinge microflow fields. In this paper, we used a numerical study to look at how different aortic sinus shapes, the downstream aortic arch geometry, and the location of the hinge recess can influence the flow fields in the hinge regions. Two geometric models for sinus were investigated: a simplified axisymmetric sinus and an idealized three-sinus aortic root model, with two different downstream geometries: a straight pipe and a simplified curved aortic arch. The flow fields of a 29-mm St Jude Medical BMHV with its four hinges were investigated. The simulations were performed throughout the entire cardiac cycle. At peak systole, recirculating flows were observed in curved downsteam aortic arch unlike in straight downstream pipe. Highly complex three-dimensional leakage flow through the hinge gap was observed in the simulation results during early diastole with the highest velocity at 4.7 m/s, whose intensity decreased toward late diastole. Also, elevated wall shear stresses were observed in the ventricular regions of the hinge recess with the highest recorded at 1.65 kPa. Different flow patterns were observed between the hinge regions in straight pipe and curved aortic arch models. We compared the four hinge regions at peak systole in an aortic arch downstream model and found that each individual hinge did not vary much in terms of the leakage flow rate through the valves.     

Decellularized amniotic membrane Scaffolds improve differentiation of iPSCs to functional hepatocyte-like cells

Human-induced pluripotent stem cells-derived hepatocyte-like cells (hiPSCs-HLCs) holds considerable promise for future clinical personalized therapy of liver disease. However, the low engraftment of these cells in the damaged liver microenvironment is still an obstacle for potential application. In this study, we explored the effectiveness of decellularized amniotic membrane (dAM) matrices for culturing of iPSCs and promoting their differentiation into HLCs. The DNA content assay and histological evaluation indicated that cellular and nuclear residues were efficiently eliminated and the AM extracellular matrix component was maintained during decelluarization. DAM matrices were developed as three-dimensional scaffolds and hiPSCs were seeded into these scaffolds in defined induction media. In dAM scaffolds, hiPSCs-HLCs gradually took a typical shape of hepatocytes (polygonal morphology). HiPSCs-HLCs that were cultured into dAM scaffolds showed a higher level of hepatic markers than those cultured in tissue culture plates (TCPs). Moreover, functional activities in term of albumin and urea synthesis and CYP3A activity were significantly higher in dAM scaffolds than TCPs over the same differentiation period. Thus, based on our results, dAM scaffold might have a considerable potential in liver tissue engineering, because it can improve hepatic differentiation of hiPSCs which exhibited higher level of the hepatic marker and more stable metabolic functions.     

Structural and Functional Studies of gpX of Escherichia coli Phage P2 Reveal a Widespread Role for LysM Domains in the Baseplates of Contractile-Tailed Phages

A variety of bacterial pathogenicity determinants, including the type VI secretion system and the virulence cassettes from Photorhabdus and Serratia, share an evolutionary origin with contractile-tailed myophages. The well-characterized Escherichia coli phage P2 provides an excellent system for studies related to these systems, as its protein composition appears to represent the “minimal” myophage tail. In this study, we used nuclear magnetic resonance (NMR) spectroscopy to determine the solution structure of gpX, a 68-residue tail baseplate protein. Although the sequence and structure of gpX are similar to those of LysM domains, which are a large family associated with peptidoglycan binding, we did not detect a peptidoglycan-binding activity for gpX. However, bioinformatic analysis revealed that half of all myophages, including all that possess phage T4-like baseplates, encode a tail protein with a LysM-like domain, emphasizing a widespread role for this domain in baseplate function. While phage P2 gpX comprises only a single LysM domain, many myophages display LysM domain fusions with other tail proteins, such as the DNA circulation protein found in Mu-like phages and gp53 of T4-like phages. Electron microscopy of P2 phage particles with an incorporated gpX-maltose binding protein fusion revealed that gpX is located at the top of the baseplate, near the junction of the baseplate and tail tube. gpW, the orthologue of phage T4 gp25, was also found to localize to this region. A general colocalization of LysM-like domains and gpW homologues in diverse phages is supported by our bioinformatic analysis.     

PDADMAC as a flocculant for lignosulfonate of NSSC pulping process

The spent liquor (SL) of neutral sulfite semi‐chemical (NSSC) pulping process contains about 8 wt% lignocelluloses that can be extracted and used in the production of value‐added materials. In this work, a flocculation process followed by centrifugation was considered for isolating lignosulfonate and hemicelluloses from SL. It was observed that, by adding 20 mg/g of polydiallyldimethylammuniom chloride (PDADMAC) with 100,000–200,000 g/mol molecular weight to SL, 45% of lignosulfonate and 39% of hemicelluloses were removed at 30°C. The lignocellulose removal was more efficient for the dual flocculation system of low and high molecular weights PDADMAC than for individual PDADMAC systems. Overall, 49% of lignosulfonate, 47% of hemicelluloses and 97% of turbidity were removed from SL from the dual system when 10 mg/g low molecular weight PDADMAC and 10 mg/g high molecular weight PDADMAC were added to the SL at 30°C, subsequently. The thermogravimetric analysis (TGA) of generated flocs showed that all samples had similar thermal behaviour and 13–16 wt% of flocs remained as ash after burning at 700°C in nitrogen. As the flocs are made of lignocellulosic materials and they are thermally stable, they could be used as fillers in paper board production. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:686–691, 2016     

The role of nitric oxide signaling in renoprotective effects of hydrogen sulfide against chronic kidney disease in rats: Involvement of oxidative stress,autophagy and apoptosis

The interplay between H₂S and nitric oxide (NO) is thought to contribute to renal functions. The current study was designed to assess the role of NO in mediating the renoprotective effects of hydrogen sulfide in the 5/6 nephrectomy (5/6 Nx) animal model. Forty rats were randomly assigned to 5 experimental groups: (a) Sham; (b) 5/6 Nx; (c) 5/6Nx+sodium hydrosulfide-a donor of H ₂S, (5/6Nx+sodium hydrosulfide [NaHS]); (d) 5/6Nx+NaHS+ L -NAME (a nonspecific nitric oxide synthase [NOS] inhibitor); (e) 5/6Nx+NaHS+aminoguanidine (a selective inhibitor of inducible NOS [iNOS]). Twelve weeks after 5/6 Nx, we assessed the expressions of iNOS and endothelial NOS (eNOS), oxidative/antioxidant status, renal fibrosis, urine N-acetyl-b-glucosaminidase (NAG) activity as the markers of kidney injury and various markers of apoptosis, inflammation, remodeling, and autophagy. NaHS treatment protected the animals against chronic kidney injury as depicted by improved oxidative/antioxidant status, reduced apoptosis, and autophagy and attenuated messenger RNA (mRNA) expression of genes associated with inflammation, remodeling, and NAG activity. Eight weeks Nω-nitro-l-arginine methyl ester ( L -NAME) administration reduced the protective effects of hydrogen sulfide. In contrast, aminoguanidine augmented the beneficial effects of hydrogen sulfide. Our finding revealed some fascinating interactions between NO and H ₂S in the kidney. Moreover, the study suggests that NO, in an isoform-dependent manner, can exert renoprotective effects in 5/6 Nx model of CKD.     

Pyrone and pyridone compounds in the liquid culture of Physisporinus sanguinolentus

Chromatographic separation of the liquid culture filtrate of the basidiomycete fungus Physisporinus sanguinolentus has yielded three new compounds viz., 2-methyl-4-pyrone, 2-methyl-5,6-dihydro-4-pyrone and the pyridone form of 4-hydroxy-2-methylpyridine, together with the known triacetic acid lactone, the sesquiterpene dialdehyde merulidial and a derivative of merulidial. Their structures were elucidated by spectroscopic analysis and by comparison to literature data and a synthetic sample. One of the compounds, merulidial, was shown to inhibit the germination of spores and the hyphal growth of the wood-rotting basidiomycete Heterobasidion annosum and the saprophytic mould Cladosporium cucumerinum.     

DNA extraction and PCR amplification method suitable for fresh, herbarium-stored, lichenized, and other fungi

This paper presents a DNA extraction method suitable for fresh, herbarium-stored, lichenized and other fungal specimens. The method is fast and reliable, comparatively inexpensive and is suitable for obtaining PCR amplification quality DNA from large numbers of samples in a short time. The method has been tested with over 300 samples ofAscochyta, Phyllosticta, Ramalina, Parmelia andPhysconia. Amplifiable fungal DNA was extracted from pure cultures, leaf lesions, whole thalli and dissected only-fungal sections of lichenized fungi. In addition, the method has proved suitable for use with herbarium specimens of both lichenized and non-lichenized fungi, stored as dried pure cultures or dried infected plant material.     

Effect of cumulus cell removal of in vitro matured bovine oocytes prior to in vitro fertilization on subsequent cleavage rate

The aim of this study is to identify the effect of cumulus cells removal prior to the in vitro fertilization of matured bovine oocytes on cleavage rate. Denuded, matured oocytes were fertilized in presence or absence of loose cumulus cells, cumulus cell conditioned IVF medium (CCCM), charcoal-treated CCCM and charcoal-treated CCCM supplemented with progesterone at a final concentration of 150 ng/ml. After 18 h of incubation with sperm, the presumptive embryos were cultured on a BRL monolayer and the percentage of cleaved embryos was evaluated on Day 4. Removal of cumulus cells prior to IVF significantly reduced the cleavage rate (25% for denuded oocytes versus 56% for cumulus-oocyte complexes (COCs)). The addition of loose cumulus cells partially restored the effect of denudation (cleavage rate: 37% for denuded oocytes supplemented with loose cumulus cells versus 27% for denuded oocytes and 58% for COCs). CCCM also had a positive effect on the cleavage rate of oocytes denuded prior to IVF (36% for denuded oocytes fertilized in CCCM versus 14% for denuded oocytes). Treating the CCCM with charcoal resulted in complete loss of its effect on cleavage rate (18% for denuded oocytes fertilized in charcoal-treated CCCM versus 34% for denuded oocytes fertilized in CCCM). The addition of progesterone to charcoal-treated CCCM partially restored the reduction of the cleavage rate caused by charcoal treatment (27% for denuded oocytes fertilized in charcoal-treated CCCM supplemented with progesterone versus 14% for denuded oocytes fertilized in charcoal-treated CCCM and 36% for denuded oocytes fertilized in CCCM). In conclusion, removal of cumulus cells prior to IVF adversely affects the cleavage rate through loss of a factor secreted by these cells. This factor probably is progesterone.