Non-lethal rapid biodiversity assessment

For several animal taxa, non-lethal techniques that do not rely on collecting individuals are routinely used to assess biodiversity (e.g. point counts in birds). Identification often relies on the ability of the observer, are subjected to errors, but populations are not impacted. Thus, multiple counting sessions (MCS) that allow using robust analyses (e.g. unbiased Chao richness estimate) are available. However, for most species (e.g. arthropods), trap systems must be set up. Killed individuals are collected and later accurately identified in the laboratory, but unbiased MCS become unavailable. Environmental DNA bar-coding provides an alternative, yet it requires important technical support and is not designed for MCS. Lethal rapid biodiversity assessments (RBA), derived from classical trap surveys and based on less accurate identifications (morphospecies are used), have been successfully developed to relax technical constraints. In this study, we combined non-lethal and RBA approaches to address logistical, analytical and ethical issues. We tested five versions of a protocol to visually survey the macro-fauna of hedgerows. A large number of individuals were directly identified in the field, mostly arthropods but also vertebrates. Identification error varied with taxonomic level and lineage, but remained low at the morphospecies level. Importantly, estimates tended to reach asymptotes, suggesting that local richness was appropriately appraised. Like any technique, non-lethal RBA (NL-RBA) present both advantages and weaknesses, and may improve the toolbox to survey biodiversity.     

Body temperatures of Namib Desert tenebrionid beetles: their relationship in laboratory and field

Abstract The body temperatures of six apterous species of Namib Desert tenebrionid beetles were measured continuously with indwelling thermocouples under laboratory conditions and in the field. The range of body temperatures selected was within the upper half of their 'tolerated range', which we defined as the temperatures lying between measured critical thermal maximum and critical thermal minimum. In the field, individuals also maintained their body temperatures within the upper half of the 'tolerated range'. These beetles maintained higher body temperatures than those recorded for any other ectothermic insect. Three of the six species maintained lower body temperatures in the field than they selected in the laboratory. The other three species showed no significant difference between field and laboratory body temperatures. We conclude that these beetles are not forced by biotic or abiotic factors to adopt thermal niches which present them with physiological difficulties.     

Enhanced enzymatic hydrolysis of hydrothermally pretreated empty fruit bunches at high solids loadings by the synergism of hemicellulase and polyethylene glycol

In enzymatic hydrolysis, high lignocellulose loadings are required to obtain high sugar titers. However, the high solids loadings limit enzymatic hydrolysis. In this study, to overcome this limitation, the promoting and synergistic effects of the accessory agents of hemicellulase (i.e., Cellic HTec2) and polyethylene glycol (PEG) 8000 were investigated in the enzymatic hydrolysis of hydrothermally pretreated empty fruit bunches (EFBs). After the optimal addition of Cellic HTec2 and PEG, high enzymatic digestion of the pretreated EFBs was achieved owing to their synergistic effects, even at high solids loadings. For example, the enzymatic digestibility of pretreated EFBs at a 21.7% (w/v) solids loading with 10 FPU of Cellic CTec2/g glucan reached 72.5% when 2.7 mg of Cellic HTec2/g glucan and 62.5 mg of PEG/g glucan were used as the accessory agents. These results suggested that the optimal addition of accessory agents is effective for the enhanced hydrolysis of lignocellulose using even a commercial cellulase preparation.     

Study of accumulation behaviour of tungsten based composite using electron probe micro analyser for the application in bone tissue engineering

In this research, a proto-type study we have conducted, where we have synthesized tungsten based composite materials which are tungsten along with combined oxides of other elements like calcium, scandium, barium, and aluminium in the form of powder with bones powder of mice devised by high energy ball mill and later on fabricating high dense pellets by sintering by spark plasma. The particle sizes of the composite materials are found to be 1–2 µm, as evidenced by the electron microscope, suggesting synthesized materials are of micron size. The quantitative and qualitative analysis of sintered pellets are well confirmed by electron probe micro analyzer (EPMA) and energy dispersive X-ray spectrometer (EDS) which illustrate the greater percentage of tungsten presents in the profound scan areas with other elements of the composite. The absence of pores across the 3D geometry suggesting dense sample, which is quite revealed by the X-ray tomography inspection. The prepared sintered pellets from the tungsten based composites are found to be ≈ 99.5% density with the observation of tungsten to be accumulated uniformly across the scan regions along with focussed hot spots as implied by EPMA. This study paves the way, to examine how the tungsten accumulation and the distribution with the other elements for future understanding in bone tissue engineering application and the in vivo specification of tungsten.     

A neutron activation technique for manganese measurements in humans

Manganese (Mn) is an essential element for humans, animals, and plants and is required for growth, development, and maintenance of health. Studies show that Mn metabolism is similar to that of iron, therefore, increased Mn levels in humans could interfere with the absorption of dietary iron leading to anemia. Also, excess exposure to Mn dust, leads to nervous system disorders similar to Parkinson's disease. Higher exposure to Mn is essentially related to industrial pollution. Thus, there is a benefit in developing a clean non-invasive technique for monitoring such increased levels of Mn in order to understand the risk of disease and development of appropriate treatments.To this end, the feasibility of Mn measurements with their minimum detection limits (MDL) has been reported earlier from the McMaster group. This work presents improvement to Mn assessment using an upgraded system and optimized times of irradiation and counting for induced gamma activity of Mn. The technique utilizes the high proton current Tandetron accelerator producing neutrons via the ⁷Li(p,n)⁷Be reaction at McMaster University and an array of nine NaI (Tl) detectors in a 4π geometry for delayed counting of gamma rays. The neutron irradiation of a set of phantoms was performed with protocols having different proton energy, current and time of irradiation. The improved MDLs estimated using the upgraded set up and constrained timings are reported as 0.67 μgMn/gCa for 2.3 MeV protons and 0.71 μgMn/gCa for 2.0 MeV protons. These are a factor of about 2.3 times better than previous measurements done at McMaster University using the in vivo set-up. Also, because of lower dose-equivalent and a relatively close MDL, the combination of: 2.0 MeV; 300 μA; 3 min protocol is recommended as compared to 2.3 MeV; 400 μA; 45 s protocol for further measurements of Mn in vivo.     

一个RNAi载体上反向重复片段的测序策略

相邻的反向重复DNA片段有形成单链内二级结构的倾向,属于一种测序困难的DNA模板。解决RNAi载体插入的反向重复片段的测序问题,为该类载体正确性的测序验证奠定基础。采用常规分子克隆方法构建表达小麦TaATG2串联反向重复片段的RNAi载体,设计2种策略对经菌落PCR初步鉴定的载体进行测序验证:一种是以完整的载体质粒为模板进行测序;另一种是先对载体进行酶切处理,切除反向重复片段中的一个后对保留另一个片段的线性载体进行测序。结果表明,第一种测序策略受到串联反向重复片段形成的单链内部二级结构的影响,测序信号在反向重复片段处出现衰减或乱峰,无法读取序列。第二种测序策略排除了2个反向重复片段之间的干扰,保留在载体上的片段测序信号清晰,序列准确。采用酶切切除一个片段后进行测序的方法,经过2次酶切和2次测序可以有效地对载体上的2个反向重复片段分别进行序列测定,进而确认构建载体的正确性。     

Molecular and immunological characterization of the major outer membrane proteins of Brucella

Abstract Saccharomyces cerevisiae exponentially growing in basic or 0.7 M NaCl medium were isotopically labelled with ³⁵S-methionine, followed by protein separation and quantification by two-dimensional polyacrylamide gel electrophoresis (2D-PAGE) combined with computerised image analysis. The electrophoretic separation resolved about 650 proteins of which 13 displayed significant and at least 2-fold changes in rate of synthesis during saline growth. By sequencing of 2D-PAGE resolved proteins, one of the 8 induced spot, p42.9/5.5, was shown to correspond to the full length (containing the N-terminal extension) product of the GPD 1 gene encoding the cytoplasmic glycerol 3-phosphate dehydrogenase. The expression of the TDH 3 gene, glyceraldehyde 3-phosphate dehydrogenase, and the ENO 2 gene, enolase, decreased during growth in NaCl medium, declines hypothesised to have an impact on the flux to glycerol.