A Bottom‐Up Approach toward All‐Solution‐Processed High‐Efficiency Cu(In,Ga)S2 Photocathodes for Solar Water Splitting

The development of solution‐processable routes to prepare efficient photoelectrodes for water splitting is highly desirable to reduce manufacturing costs. Recently, sulfide chalcopyrites (Cu(In,Ga)S₂) have attracted attention as photocathodes for hydrogen evolution owing to their outstanding optoelectronic properties and their band gap—wider than their selenide counterparts—which can potentially increase the attainable photovoltage. A straightforward and all‐solution‐processable approach for the fabrication of highly efficient photocathodes based on Cu(In,Ga)S₂ is reported for the first time. It is demonstrated that semiconductor nanocrystals can be successfully employed as building blocks to prepare phase‐pure microcrystalline thin films by incorporating different additives (Sb, Bi, Mg) that promote the coalescence of the nanocrystals during annealing. Importantly, the grain size is directly correlated to improved charge transport for Sb and Bi additives, but it is shown that secondary effects can be detrimental to performance even with large grains (for Mg). For optimized electrodes, the sequential deposition of thin layers of n‐type CdS and TiO₂ by solution‐based methods, and platinum as an electrocatalyst, leads to stable photocurrents saturating at 8.0 mA cm^–2 and onsetting at ≈0.6 V versus RHE under AM 1.5G illumination for CuInS₂ films. Electrodes prepared by our method rival the state‐of‐the‐art performance for these materials.     

Pore Structure Controlling the Activity of Mesoporous Crystalline CsTaWO6 for Photocatalytic Hydrogen Generation

The quaternary oxide CsTaWO₆ exhibits a very high activity for photocatalytic hydrogen generation and water splitting. To improve its properties with regard to photocatalytic applications, it is prepared with mesoporous morphology for the first time, utilizing a template‐based evaporation‐induced self‐assembly process. The resulting material exhibits a median mesopore size of 10 nm, a surface area of 60 m² g^?1, and high crystallinity after preparation at 550 °C with phase‐pure defect‐pyrochlore structure. To further improve the textural properties of mesoporous CsTaWO₆, the addition of additives to the synthesis procedure is also investigated. By using H₂SO₄/HCl and a carbonization/oxidation procedure, the surface area of the resulting mesoporous CsTaWO₆ is increased to 78 m² g^?1, which is a 20‐fold increase compared to a nonporous reference via sol‐gel preparation, also leading to improved photocatalytic activity. By investigating the ability for photocatalytic hydrogen generation, the importance of high surface area and pore diameter of the resulting materials in comparison to nonporous materials is presented. Interestingly, the photocatalytic activity does not increase linearly with surface area, due to a strong influence of the pore diameter on the photocatalytic activity.     

Self-decontaminating photocatalytic zinc oxide nanorod coatings for prevention of marine microfouling: a mesocosm study

The antifouling (AF) properties of zinc oxide (ZnO) nanorod coated glass substrata were investigated in an out-door mesocosm experiment under natural sunlight (14:10 light: dark photoperiod) over a period of five days. The total bacterial density (a six-fold reduction) and viability (a three-fold reduction) was significantly reduced by nanocoatings in the presence of sunlight. In the absence of sunlight, coated and control substrata were colonized equally by bacteria. MiSeq Illumina sequencing of 16S rRNA genes revealed distinct bacterial communities on the nanocoated and control substrata in the presence and absence of light. Diatom communities also varied on nanocoated substrata in the presence and the absence of light. The observed AF activity of the ZnO nanocoatings is attributed to the formation of reactive oxygen species (ROS) through photocatalysis in the presence of sunlight. These nanocoatings are a significant step towards the production of an environmentally friendly AF coating that utilizes a sustainable supply of sunlight.     

Bismuth Tantalum Oxyhalogen: A Promising Candidate Photocatalyst for Solar Water Splitting

As wide range of light absorption and suitable redox potentials are prerequisites for photocatalytic water splitting, exploring new semiconductor‐based materials with proper band structures for water splitting still calls for longstanding efforts. In this work, a series of photocatalysts, bismuth tantalum oxyhalide, Bi₄TaO₈X (X = Cl, Br), with valence band and conduction band positions at ≈?0.70 and ≈1.80 eV versus the reversible hydrogen electrode (RHE), respectively, are found to be capable for both water oxidation and reduction under visible light irradiation. Using flux synthetic methods, Bi₄TaO₈X (X = Cl, Br) with microplatelet morphology can be successfully prepared. The photocatalyst based on these materials shows an apparent quantum efficiency as high as 20% at 420 nm for water oxidation. In addition, a Z‐scheme system coupling Bi₄TaO₈Br with Ru/SrTiO₃:Rh is successfully achieved for overall water splitting with a stoichiometric ratio of H₂ and O₂ evolutions. This work demonstrates a new series of semiconductors Bi₄TaO₈X (X = Cl, Br) with the promising application in the field of solar energy utilization.     

Photocatalytic processes by polyoxometalates. Splitting of water. The role of dioxygen

Photolysis of polyoxometalates at the oxygen to metal charge transfer bands, at the near visible and UV areas, in the presence of a great variety of organic compounds, results in multielectron reduction of polyoxometalates and concomitant oxidation of organic compounds. In the absence of dioxygen, photolysis accumulates electrons on polyoxometalates, moving the redox potential to more negative values, until the reduced catalyst is able to deliver its electrons to H⁺. At this point, a steady state is produced at which the rate of photoreduction of polyoxometalate is matched by its rate of reoxidation by H⁺ (H₂-evolution). The presence of dioxygen has the following results: (a) It reoxidizes very fast and effectively and photoreduced polyoxometalate, accelerating the photocatalytic cycle by an order of magnitude, and (b) its activation by the reduced catalyst provides, usually, an extra step in which further oxidations of a variety of organic compounds have been obtained.     

Microwave‐Induced Metal Dissolution Synthesis of Core–Shell Copper Nanowires/ZnS for Visible Light Photocatalytic H2 Evolution

A microwave‐induced metal dissolution strategy is developed for in situ synthesis of copper nanowires/ZnS (CuNWs/ZnS) hybrids with core–shell structure. The CuNWs are used as microwave antennas to create local “super‐hot” surfaces to further initiate ZnS crystallization with full coverage on CuNWs. With the help of S^2?, the hot metal surface further results in the CuNWs dissolution with promoted Cu⁺ diffusion and incorporation into the ZnS lattice. With the narrowed bandgap of ZnS and the strongly coupled interface between CuNWs and ZnS created by microwaves, the as‐prepared hybrid composites exhibit an enhanced activity and stability in visible light for the photocatalytic H₂ evolution. The corresponding H₂ evolution rate reaches up to 10722 µmol h^?1 g^?1 with apparent quantum efficiency (AQE) of 69% under 420 nm LED irradiation, showing a remarkably high AQE among the noble‐metal free visible light‐driven photocatalysts and demonstrating a promising potential in practical applications to deal with the energy crisis.     

Interfacial Charge Modulation: An Efficient Strategy for Boosting Spatial Charge Separation on Semiconductor Photocatalysts

Surface modulation via injection or extraction of charge carriers in microelectric devices has been used to tune the energy band alignment for desired electrical and optical properties, yet not well recognized in photocatalysis field. Here, taking semiconductor bismuth tantalum oxyhalides (Bi₄TaO₈X) as examples, chemically inactive molybdenum oxide (MoO₃) with a large work function is introduced to qualitatively tune the properties of interfacial charges, achieving an evidently enhanced upward band bending and intensive built‐in electric field. Such a simple charge modulation exhibits a remarkable improvement in photocatalytic water oxidation, reaching an apparent quantum efficiency of 25% at the input wavelength of 420 nm. The validity and generality of surface charge modulating strategy are further demonstrated using other semiconductors (e.g., C₃N₄) and decorators (e.g., V₂O₅). The findings not only provide a promising strategy for rationally manipulating the interfacial built‐in electric field in photocatalysis but also pave the way to learn from microelectronic technologies to construct artificial photosynthesis systems for solar energy conversion.     

Photochemically driven models of oxygenases based on the use of iron porphyrins

Photoexcited iron porphyrins can be used to mimic the catalytic activity of cytochrome P-450 oxygenases both in the reduction of halogenated alkanes and in the oxidation of hydrocarbons by O₂ itself at room temperature and atmospheric pressure. The results reported indicate that there is a similarity and a complementarity of photonic activation with other more conventional methods of activation of model systems of oxygenases. In fact, by irradiating at suitable wavelengths, it is possible to induce redox reactions which mimic those of natural oxygenases, avoiding the difficulties caused by parallel processes which could be expected when chemical reagents are used. These processes occur with good turnover values of the photocatalyst and in mild temperature and pressure conditions. By controlling the reaction environment, it is possible to address the selectivity of the process. In this regard, the very recent results obtained after heterogenization of the photocatalysts inside membranes of Nafion® are particularly promising for the development of new biomimetic photocatalysts in heterogeneous or organized systems.     

Photopatterning Proteins and Cells in Aqueous Environment Using TiO2 Photocatalysis

Organic contaminants adsorbed on the surface of titanium dioxide (TiO₂) can be decomposed by photocatalysis under ultraviolet (UV) light. Here we describe a novel protocol employing the TiO₂ photocatalysis to locally alter cell affinity of the substrate surface. For this experiment, a thin TiO₂ film was sputter-coated on a glass coverslip, and the TiO₂ surface was subsequently modified with an organosilane monolayer derived from octadecyltrichlorosilane (OTS), which inhibits cell adhesion. The sample was immersed in a cell culture medium, and focused UV light was irradiated to an octagonal region. When a neuronal cell line PC12 cells were plated on the sample, cells adhered only on the UV-irradiated area. We further show that this surface modification can also be performed in situ, i.e., even when cells are growing on the substrate. Proper modification of the surface required an extracellular matrix protein collagen to be present in the medium at the time of UV irradiation. The technique presented here can potentially be employed in patterning multiple cell types for constructing coculture systems or to arbitrarily manipulate cells under culture.