Leaf traits of natural populations of <Emphasis Type="Italic">Adiantum reniforme</Emphasis> var. <Emphasis Type="Italic">sinensis</Emphasis>, endemic to the Three Gorges region in China

Leaf mass per unit area (LMA), carbon and nitrogen contents, leaf construction cost, and photosynthetic capacity (P _max) of Adiantum reniforme var. sinensis, an endangered fern endemic to the Three Gorges region in southwest China, were compared in five populations differing in habitat such as soil moisture and irradiance. The low soil moisture and high irradiance habitat population exhibited significantly higher LMA, area-based leaf construction (CC_A), and carbon content (C_A), but lower leaf nitrogen content per unit dry mass (N_M) than the other habitat populations. The high soil moisture and low irradiance habitat populations had the lowest CC_A, but their cost/benefic ratios of CCA/P _max were similar to the medium soil moisture and irradiance habitat population due to their lower leaf P _max. Hence A. reniforme var. sinensis prefers partially shaded, moist but well-drained, slope habitats. Due to human activities, however, its main habitats now are cliffs or steeply sloped bare rocks with poor and thin soil. The relatively high energy requirements and low photosynthetic capacity in these habitats could limit the capability of the species in extending population or interspecific competition and hence increase its endangerment.     

Genome size evolution in relation to leaf strategy and metabolic rates revisited

BACKGROUND AND AIMS: It has been proposed that having too much DNA may carry physiological consequences for plants. The strong correlation between DNA content, cell size and cell division rate could lead to predictable morphological variation in plants, including a negative relationship with leaf mass per unit area (LMA). In addition, the possible increased demand for resources in species with high DNA content may have downstream effects on maximal metabolic efficiency, including decreased metabolic rates. METHODS: Tests were made for genome size-dependent variation in LMA and metabolic rates (mass-based photosynthetic rate and dark respiration rate) using our own measurements and data from a plant functional trait database (Glopnet). These associations were tested using two metrics of genome size: bulk DNA amount (2C DNA) and monoploid genome size (1Cx DNA). The data were analysed using an evolutionary framework that included a regression analysis and independent contrasts using a phylogenetic tree with estimates of molecular diversification times. A contribution index for the LMA data set was also calculated to determine which divergences have the greatest influence on the relationship between genome size and LMA. KEY RESULTS AND CONCLUSIONS: A significant negative association was found between bulk DNA amount and LMA in angiosperms. This was primarily a result of influential divergences that may represent early shifts in growth form. However, divergences in bulk DNA amount were positively associated with divergences in LMA, suggesting that the relationship may be indirect and mediated through other traits directly related to genome size. There was a significant negative association between genome size and metabolic rates that was driven by a basal divergence between angiosperms and gymnosperms; no significant independent contrast results were found. Therefore, it is concluded that genome size-dependent constraints acting on metabolic efficiency may not exist within seed plants.     

非线性种群反应扩散系统奇摄动ROBIN问题

研究了一类具有非线性种群反应扩散系统奇摄动Robin初始边值问题.在适当的条件下,利用微分不等式理论,讨论了问题解的存在性和渐近性态.     

Leaf economics and hydraulic traits are decoupled in five species‐rich tropical‐subtropical forests

Leaf economics and hydraulic traits are critical to leaf photosynthesis, yet it is debated whether these two sets of traits vary in a fully coordinated manner or there is room for independent variation. Here, we tested the relationship between leaf economics traits, including leaf nitrogen concentration and leaf dry mass per area, and leaf hydraulic traits including stomatal density and vein density in five tropical‐subtropical forests. Surprisingly, these two suites of traits were statistically decoupled. This decoupling suggests that independent trait dimensions exist within a leaf, with leaf economics dimension corresponding to light capture and tissue longevity, and the hydraulic dimension to water‐use and leaf temperature maintenance. Clearly, leaf economics and hydraulic traits can vary independently, thus allowing for more possible plant trait combinations. Compared with a single trait dimension, multiple trait dimensions may better enable species adaptations to multifarious niche dimensions, promote diverse plant strategies and facilitate species coexistence.     

海南霸王岭天然次生林边缘效应下木质藤本与树木的关系

选择海南岛霸王岭天然恢复60 a的次生林样地中形成年限为17和13年的边缘,分别设置4条10 m100 m的样带,研究边缘效应下dbh ≥1 cm树木的攀藤率、被藤本攀附的频度和每木藤本数随距边缘距离的变化。结果表明：在0.8 hm2的样带中,树木的攀藤率分别为44.58%（17年边缘）和32.63%（13年边缘）。2种边缘中,dbh 1—5 cm、5—10 cm树木的攀藤率都随距离发生了变化,17年边缘中dbh ＞20 cm和13年边缘中dbh 10—20 cm树木的攀藤率都没有随距离的变化而变化。树木被藤本攀附的频度随距边缘距离的增加而降低,攀附3株以上藤本的树木最少,在17年边缘中变化趋势较明显;攀附1株藤本的树木最多,在13年边缘中变化明显。17年边缘中每木藤本数随距离增加而降低。在边缘形成初期,边缘形成年限对每木藤本数产生了影响,其在17年边缘中下降程度较大,但总体高于13年边缘中。     

神农架海拔梯度上4种典型森林的乔木叶片功能性状特征

研究植物群落叶片功能性状沿环境梯度的变化可以更好地认识群落对环境的适应机制,海拔梯度在较小的空间范围内浓缩了不同的群落类型和环境梯度,是研究和理解群落与环境关系的理想场所。以神农架海拔梯度上4种典型森林为研究对象,分析了4种典型森林优势乔木树种的LMA、LDMC、N_area、N_mass、叶片厚度及叶片叶绿素含量等主要叶片功能性状随海拔的变化规律及各功能性状之间的相关性,以期从叶片功能性状角度揭示群落适应环境的机制。研究结果表明:在780-1970 m范围内,神农架海拔梯度上典型森林乔木优势种叶片的、N_area和叶片厚度随海拔升高而下降,而海拔2570 m的亚高山针叶林的LMA、N_area和叶片厚度最高,分别为187.37 g/cm²、1.92 g/m²和385.31 um,且针叶林的LMA是常绿阔叶林的2倍、落叶阔叶林的3.7倍;除常绿落叶阔叶混交林的N_mass小于落叶阔叶林外,N_mass随海拔升高(780-2570 m)而下降;海拔最高(2570 m)的针叶林和海拔最低(780 m)的常绿阔叶林的LDMC和叶绿素含量最高,分别为454.93 g/kg、407.64 g/kg和48.84、44.12;而海拔介于二者之间的常绿落叶阔叶混交林和落叶阔叶林的LDMC和叶绿素含量则最低,分别为338.93 g/kg、337.3 g/kg和38.73、38.19。叶片各功能性状之间存在着显著的相关性:叶片厚度与LMA/LDMC及LMA显著正相关。叶片叶绿素含量与N_area显著正相关。LMA与LDMC、N_area、叶片厚度、叶绿素含量显著正相关,LDMC与N_area、叶绿素含量、叶片厚度显著正相关,N_area与叶片厚度、叶绿素含量显著正相关,叶片厚度、叶绿素含量显著正相关。本研究进一步表明,随着海拔梯度上升环境条件的变化,森林群落不同物种功能性状间的相互作用共同决定着森林群落对环境的适应性。     

Improvement of a crystallization process for the purification of vancomycin

We evaluated the effects of the sample feeding and mixing methods on the efficiency of vancomycin crystallization and developed a method to dramatically shorten the time required for crystal formation by increasing the available surface area inside the reactor. The highest purity (97%) and yield (99%) of vancomycin could be obtained with an initial one-step feeding and mixing method, resulting in the formation and growth of spherical fan-shaped crystals. The yield of vancomycin increased when the surface area per working volume (S/V) was increased to 0.428 mm⁻¹ using glass beads (0.5 mm), the cation exchange resin Amberlite 200, or the anion exchange resin Amberlite IRA-400. In particular, most of the vancomycin (>99%) could be recovered after 6 h of crystallization using Amberlite 200, resulting in a dramatic reduction in the time required for crystallization. On the other hand, increasing S/V had almost no effect on vancomycin purity and crystal size.