网袋强化椎体成形术在骨质疏松椎体骨折治疗中的经验教训

摘要 目的：探讨和总结使用网袋强化椎体成形术在骨质疏松椎体骨折围手术期的注意事项及相关对策。方法：回顾性分析2017年6月到2020年6月3年时间内,使用网袋强化椎体成形术治疗骨质疏松性椎体骨折患者共计112例。统计和比较患者在围手术期的各项指标,分析穿刺失败的原因及相关危险因素。结果：112例患者共涉及138个椎体。其中一期穿刺失败率（骨水泥分布不佳）为47个,占34.0%。骨水泥注入3 mL以下者为19个,占13.8%。骨水泥渗漏为36个,占26.1%。所有患者在术后3天及3月复查, VAS评分和ODI评分较前均有显著改善(P<0.05)。所有患者均未出现严重并发症(P>0.05)。结论：网袋强化椎体成形术在骨质疏松性椎体骨折的治疗中是一种理想的治疗方式,但在具体过程中仍有相关的经验和教训需要整理和总结。     

不同经皮克氏针内固定术治疗儿童GartlandⅡ、Ⅲ型肱骨髁上骨折疗效对比的回顾性分析

摘要 目的：对比不同经皮克氏针内固定术治疗GartlandⅡ、Ⅲ型肱骨髁上骨折患儿的治疗效果。方法：回顾性分析2017年3月~2020年3月期间我院收治的90例GartlandⅡ、Ⅲ型肱骨髁上骨折患儿的临床资料,根据治疗方式的不同,将患儿分为A组47例（采用切开复位经皮克氏针内固定术治疗）和B组43例（采用闭合复位经皮克氏针内固定术治疗）。观察两组疗效情况、围术期指标情况及并发症发生率。结果：A组、B组的优良率组间对比无统计学差异（P>0.05）。B组的手术时间、骨折愈合时间、住院时间均短于A组,术中失血量少于A组,组间对比差异有统计学意义（P<0.05）。两组术后并发症发生率比较差异无统计学意义（P>0.05）。结论：GartlandⅡ、Ⅲ型肱骨髁上骨折患儿采用闭合复位或切开复位经皮克氏针内固定术均可获得良好的手术效果,其中闭合复位在缩短手术时间、骨折愈合时间、住院时间和减少术中失血量方面更具备优势。     

切开与闭合复位空心钉内固定对移位股骨颈骨折患者骨折复位质量和髋关节功能的影响

摘要 目的：探讨切开与闭合复位空心钉内固定对移位股骨颈骨折患者骨折复位质量和髋关节功能的影响。方法：本研究为回顾性研究,选取98例移位股骨颈骨折患者的临床资料,根据手术方式的不同将患者分为A组（n=50,切开复位）和B组（n=48,闭合复位）,比较两组患者优良率、骨折复位质量、髋关节功能、围术期指标、术后并发症发生率和二次手术发生率。结果：A组患者术后6个月的优良率为78.00%（39/50）,高于B组的58.33%（28/48）（P<0.05）。两组术后负重下地时间、术中透视时间比较无差异（P>0.05）;B组手术时间、住院时间短于A组,术中出血量少于A组（P<0.05）。两组患者术后1个月、术后3个月、术后6个月髋关节功能Harris评分均较术前升高,且A组高于B组（P<0.05）。两组二次手术及并发症发生率比较无差异（P>0.05）。A组Ⅰ型、Ⅱ型的例数均多于B组,Ⅲ型例数少于B组（P<0.05）。结论：与闭合复位空心钉内固定相比,切开复位空心钉内固定虽损伤较大,但其术后骨折复位质量和髋关节功能改善效果更佳,且不增加并发症发生率和二次手术发生率。     

SGT1 is not required for plant LRR-RLK-mediated immunity

Plant immune signalling activated by the perception of pathogen-associated molecular patterns (PAMPs) or effector proteins is mediated by pattern-recognition receptors (PRRs) and nucleotide-binding and leucine-rich repeat domain-containing receptors (NLRs), which often share cellular components and downstream responses. Many PRRs are leucine-rich repeat receptor-like kinases (LRR-RLKs), which mostly perceive proteinaceous PAMPs. The suppressor of the G2 allele of skp1 (SGT1) is a core immune regulator required for the activation of NLR-mediated immunity. In this work, we examined the requirement of SGT1 for immune responses mediated by several LRR-RLKs in both Nicotiana benthamiana and Arabidopsis. Using complementary genetic approaches, we found that SGT1 is not limiting for early PRR-dependent responses or antibacterial immunity. We therefore conclude that SGT1 does not play a significant role in bacterial PAMP-triggered immunity.     

Accuracy of specimen-specific nonlinear finite element analysis for evaluation of radial diaphysis strength in cadaver material

The feasibility of a user-specific finite element model for predicting the in situ strength of the radius after implantation of bone plates for open fracture reduction was established. The effect of metal artifact in CT imaging was characterized. The results were verified against biomechanical test data. Fourteen cadaveric radii were divided into two groups: (1) intact radii for evaluating the accuracy of radial diaphysis strength predictions with finite element analysis and (2) radii with a locking plate affixed for evaluating metal artifact. All bones were imaged with CT. In the plated group, radii were first imaged with the plates affixed (for simulating digital plate removal). They were then subsequently imaged with the locking plates and screws removed (actual plate removal). Fracture strength of the radius diaphysis under axial compression was predicted with a three-dimensional, specimen-specific, nonlinear finite element analysis for both the intact and plated bones (bones with and without the plate captured in the scan). Specimens were then loaded to failure using a universal testing machine to verify the actual fracture load. In the intact group, the physical and predicted fracture loads were strongly correlated. For radii with plates affixed, the physical and predicted (simulated plate removal and actual plate removal) fracture loads were strongly correlated. This study demonstrates that our specimen-specific finite element analysis can accurately predict the strength of the radial diaphysis. The metal artifact from CT imaging was shown to produce an overestimate of strength.     

Towards a patient-specific estimation of intra-operative femoral fracture risk

Abstract

Total Hip Arthroplasty requires pre-surgical evaluation between un-cemented and cemented prostheses. A Patient with intra-operative periprosthetic fracture and another with a successful outcome were recruited, and their finite element models were constructed by processing CT data, assuming elastic-plastic behavior of the bone as function of the local density. To resemble the insertion of the prosthesis into the femur, a fictitious thermal dilatation is applied to the broach volume. Strain-based fracture risk factor is estimated, depicting results in terms of the total mechanical strain expressed using a simple “traffic lights” color code to provide immediate, concise, and intelligible pre-operative information to surgeons.     

Predicting the structural integrity of bone defects repaired using bone graft materials

Bone defects create stress concentrations which can cause fracture under impact or cyclic loading. Defects are often repaired by filling them with a bone graft material; this will reduce the stress concentration, but not completely, because these materials have lower stiffness than bone. The fracture risk decreases over time as the graft material is replaced by living bone. Many new bone graft materials are being developed, using tissue engineering and other techniques, but currently there is no rational way to compare these materials and predict their effectiveness in repairing a given defect. This paper describes, for the first time, a theoretical model which can be used to predict failure by brittle fracture or fatigue, initiating at the defect. Preliminary results are presented, concentrating on the prediction of stress fracture during the crucial post-operative period. It is shown that the likelihood of fracture is strongly influenced by the shape of the defect as well as its size, and also by the level of post-operative exercise. The most important finding is that bone graft materials can be successful in preventing fracture even when their mechanical properties are greatly inferior to those of bone. Future uses of this technique include pre-clinical assessment of bone replacement materials and pre-operative planning in orthopaedic surgery.     

An anatomical subject-specific FE-model for hip fracture load prediction

In order to reduce the socio-economic burden induced by osteoporotic hip fractures, finite element models have been evaluated as an additional diagnostic tool for fracture prediction. For a future clinical application, the challenge is to reach the best compromise between model relevance and computing time. Based on this consideration, the current study focused on the development and validation of a subject-specific FE-model using an original parameterised generic model and a specific personalization method. A total of 39 human femurs were tested to failure under a quasi-static compression in stance configuration. The corresponding FE-models were generated and for each specimen the numerical fracture load (F _FEM) was compared with the experimental value (F _EXP), resulting in a significant correlation (F _EXP = 1.006 F _FEM with r ² = 0.87 and SEE = 1220 N, p < 0.05) obtained with a reasonable computing time (30 mn). Further in vivo study should confirm the ability of this FE-model to improve the fracture risk prediction.     

Stochastic-rheological Simulation of Free-fall Arm Impact in Children: Application to Playground Injuries

The aim of this study was to develop and pilot a stochastic-rheological biomechanical model to investigate the mechanics of impact fractures in the upper limbs of children who fall in everyday situations, such as when playing on playground equipment. The rheological aspect of the model characterises musculo-skeletal tissues in terms of inertial, elastic and viscous parameters. The stochastic aspect of the model allows natural variation of children's musculo-skeletal mechanical properties to be accounted for in the analysis. The relationship of risk factors, such as fall height, impact surface, child mass and bone density, to the probability of sustaining an injury in playground equipment falls were examined and found to closely match findings in epidemiological, clinical and biomechanical literature. These results suggest that the stochastic-rheological model is a useful tool for the evaluation of arm fracture risk in children. Once fully developed, information from this model will provide the basis for recommendations for modifications to playground equipment and surface standards.     

Detailed finite element modelling of deep needle insertions into a soft tissue phantom using a cohesive approach

Detailed finite element modelling of needle insertions into soft tissue phantoms encounters difficulties of large deformations, high friction, contact loading and material failure. This paper demonstrates the use of cohesive elements in high-resolution finite element models to overcome some of the issues associated with these factors. Experiments are presented enabling extraction of the strain energy release rate during crack formation. Using data from these experiments, cohesive elements are calibrated and then implemented in models for validation of the needle insertion process. Successful modelling enables direct comparison of finite element and experimental force–displacement plots and energy distributions. Regions of crack creation, relaxation, cutting and full penetration are identified. By closing the loop between experiments and detailed finite element modelling, a methodology is established which will enable design modifications of a soft tissue probe that steers through complex mechanical interactions with the surrounding material.