利用归一化互相关算法去除吸收强度涨落调制血管造影图像模糊

吸收强度涨落调制成像（AIFM）方法是基于血红细胞和背景组织对低相干光照明的吸收差异,通过在频域分离动态的血红细胞信号和静态的背景信号,实现对近透明活体生物样本全场无标记的光学血管造影成像. 但此成像方法需采集较长的原始图像序列,系统漂移或生物抖动会造成图像模糊,难以实现对某些特定区域的血管造影成像. 本文提出一种结合AIFM成像和归一化互相关算法的新方法来提升血管造影图像的质量：原始的图像序列被分成若干短时序列,每个短时序列先利用AIFM成像算法重构得到全场的血管造影图像;再利用归一化的互相关算法将所有的短时重构图像与第一帧重构图像相匹配,并融合得到最终的血管造影片. 我们以活体鸡蛋胚胎为样品,通过实验验证了利用短时归一化互相关AIFM成像方法,能够消除鸡胚胎心跳引起的图像模糊,从而获得高分辨率和信噪比的心血管造影片,对研究活体动物心脑血管疾病具有重要应用价值.     

基于实测高光谱与Sentinel-2B数据的银北土壤Na+含量估测

为了探讨不同传感器对土壤Na⁺含量的估测能力,本研究以宁夏银北地区典型样点土壤实测光谱和Sentinel-2B影像光谱为对象,运用逐步回归(SR)和主成分回归分析(PCA)方法对光谱数据进行敏感参量筛选,然后采用偏最小二乘回归(PLSR)、支持向量机(SVM)和反向传播神经网络模型(BPNN)分别建立实测光谱和影像数据的土壤Na⁺含量估算模型。结果表明: 除Band9外,实测重采样数据与影像数据呈极显著相关。基于SR筛选方式建立的模型估算精度普遍高于PCA(SVM模型除外),PCA-SVM模型为影像最佳Na⁺含量估算模型,预测精度为0.792;SR-BPNN模型为实测最佳Na⁺含量估算模型,预测精度达到0.908。经重采样实测光谱模型校正后的SR-PLSR影像光谱土壤Na⁺含量估算模型精度从0.481提高到0.798,有效提高了较大尺度下的土壤Na⁺含量估算精度。本研究实现了遥感监测土壤Na⁺含量由点向面的空间转换,为Sentinel-2B影像监测盐渍化土壤Na⁺含量提供了科学参考。     

冠状动脉磁共振血管成像和CT对可疑冠心病患者心脏事件的预测价值的比较研究

摘要 目的：探讨与比较冠状动脉核磁共振(MR)血管成像和CT对可疑冠心病患者心脏事件的预测价值。方法：2018年4月到2020年10月选择在本院诊治的103例可疑冠心病患者作为研究对象,所有患者都给予冠状动脉MRI血管成像与64层螺旋CT冠状动脉成像检查,记录影像学特征。随访患者的预后并进行预测价值分析。结果：103例可疑冠心病患者随访到2021年4月1日,发生心血管不良终点事件23例(不良事件组),发生率为22.3%。不良事件组的MRI血管成像显示右冠状动脉血管长度与内径都低于非不良事件组(P<0.05)。不良事件组的CT显示斑块率、斑块性质等与非不良事件组对比差异有统计学意义(P<0.05),两组斑块位置对比差异无统计学意义(P>0.05)。多因素Cox回归分析显示斑块性质、斑块率、右冠状动脉血管长度与内径都为导致心血管不良终点事件的重要因素(P<0.05)。结论：冠状动脉MRI血管成像和CT都可有效预测可疑冠心病患者心脏事件发生情况,能满足临床诊断可疑冠心病与预测预后的要求。     

铜川汉族人群38个Y-STR基因座多态性调查

Y染色体上的短串联重复序列（Y chromosome short tandem repeats, Y-STRs）在法医鉴定,尤其是混合斑中男性成分的检测分析和家系排查中具有重要作用。随着Y-STR试剂盒的不断推出和数据库的建立,国内外针对不同地区和群体的Y-STR多态性研究日益增多,而有关铜川汉族Y-STR研究鲜有报道。基于此,采用YfilerTM Platinum复合扩增试剂盒对陕西铜川汉族669名无关男性个体进行38个Y-STR基因座遗传多态性调查,并探索铜川地区汉族与其他群体之间的遗传关系。调查共检出657种单倍型,单倍型多样性和识别能力分别为0.999 937 345和0.982 1。38个Y-STR基因座共检出428个等位基因,基因多样性值在0.108 9（DYS645）~0.969 9（DYS385）。群体遗传分析中,多维尺度分析（multi-dimensional scaling, MDS）和系统发育树分析结果显示铜川汉族与其他地区的汉族群体遗传距离更近。综上,研究结果中38个Y-STR基因座在铜川汉族群体中具有较高的遗传多态性,适合铜川地区法庭科学应用。     

Analytical validation of quantitative immunohistochemical assays of tumor infiltrating lymphocyte biomarkers

Tumor infiltrating lymphocytes (TIL), especially T-cells, have both prognostic and therapeutic applications. The presence of CD8+ effector T-cells and the ratio of CD8+ cells to FOXP3+ regulatory T-cells have been used as biomarkers of disease prognosis to predict response to various immunotherapies. Blocking the interaction between inhibitory receptors on T-cells and their ligands with therapeutic antibodies including atezolizumab, nivolumab, pembrolizumab and tremelimumab increases the immune response against cancer cells and has shown significant improvement in clinical benefits and survival in several different tumor types. The improved clinical outcome is presumed to be associated with a higher tumor infiltration; therefore, it is thought that more accurate methods for measuring the amount of TIL could assist prognosis and predict treatment response. We have developed and validated quantitative immunohistochemistry (IHC) assays for CD3, CD8 and FOXP3 for immunophenotyping T-lymphocytes in tumor tissue. Various types of formalin fixed, paraffin embedded (FFPE) tumor tissues were immunolabeled with anti-CD3, anti-CD8 and anti-FOXP3 antibodies using an IHC autostainer. The tumor area of stained tissues, including the invasive margin of the tumor, was scored by a pathologist (visual scoring) and by computer-based quantitative image analysis. Two image analysis scores were obtained for the staining of each biomarker: the percent positive cells in the tumor area and positive cells/mm² tumor area. Comparison of visual vs. image analysis scoring methods using regression analysis showed high correlation and indicated that quantitative image analysis can be used to score the number of positive cells in IHC stained slides. To demonstrate that the IHC assays produce consistent results in normal daily testing, we evaluated the specificity, sensitivity and reproducibility of the IHC assays using both visual and image analysis scoring methods. We found that CD3, CD8 and FOXP3 IHC assays met the fit-for-purpose analytical acceptance validation criteria and that they can be used to support clinical studies.     

Influence of the method of TM joint total replacement implantation on the loading of the joint on the opposite side

The temporomandibular (TM) joint is one of the most used joints in the human body, and any defect in this joint has a significant influence on quality of life. The objective of this study was to create a parametric numerical finite element (FE) analysis to compare the effect of surgical techniques used for total TM joint replacement implantation on loading the TM joint on the other side. Our hypothesis is that for the optimal function of all total TM joint replacements used in clinical practice it is crucial to devise a minimally invasive surgical technique, whereby there is minimum resection of masticatory muscles. This factor is more important than the design of the usually used total TM joint replacements. The extent of muscle resection influences the mechanical loading of the whole system. In the parametric FE analyses, the magnitude of the TM joint loading was compared for four different ranges of muscle resections during bite, using an anatomical model. The results obtained from all FE analyses support our hypothesis that an increasing extent of the muscle resection increased the magnitude of the TM joint overloading on the opposite side. The magnitude of the TM joint overloading increased depending on the muscle resection to 235% for bite on an incisor and up to 491% for bite on molars. Our study leads to a recommendation that muscle resection be minimised during replacement implantation and to a proposal that the attachment of the condylar part of the TM joint replacement be modified.     

A semi-automated method for hexahedral mesh construction of human vertebrae from CT scans

Generation of finite element (FE) meshes of vertebrae from computed tomography (CT) scans is labour intensive due to their geometric complexity. As such, techniques that simplify creation of meshes of vertebrae are needed to make FE analysis feasible for large studies and clinical applications. Techniques to obtain a geometric representation of bone contours from CT scans of vertebrae and construct a hexahedral mesh from the contours were developed. An automated edge detection technique was developed to identify surface contours of the vertebrae, followed by atlas based B-spline curve fitting to construct curves from the edge points. The method was automatic and robust to missing data, with a controllable degree of smoothing and interpolation. Parametric mapping was then used to generate nodes for each CT slice, which were connected between slices to obtain a hexahedral mesh. This method could be adapted for modelling a variety of orthopaedic structures.     

An automatic 2D–3D image matching method for reproducing spatial knee joint positions using single or dual fluoroscopic images

Fluoroscopic image technique, using either a single image or dual images, has been widely applied to measure in vivo human knee joint kinematics. However, few studies have compared the advantages of using single and dual fluoroscopic images. Furthermore, due to the size limitation of the image intensifiers, it is possible that only a portion of the knee joint could be captured by the fluoroscopy during dynamic knee joint motion. In this paper, we presented a systematic evaluation of an automatic 2D–3D image matching method in reproducing spatial knee joint positions using either single or dual fluoroscopic image techniques. The data indicated that for the femur and tibia, their spatial positions could be determined with an accuracy and precision less than 0.2 mm in translation and less than 0.4° in orientation when dual fluoroscopic images were used. Using single fluoroscopic images, the method could produce satisfactory accuracy in joint positions in the imaging plane (in average up to 0.5 mm in translation and 1.3° in rotation), but large variations along the out-plane direction (in average up to 4.0 mm in translation and 2.2° in rotation). The precision of using single fluoroscopic images to determine the actual knee positions was worse than its accuracy obtained. The data also indicated that when using dual fluoroscopic image technique, if the knee joint outlines in one image were incomplete by 80%, the algorithm could still reproduce the joint positions with high precisions.     

Results of automatic image registration are dependent on initial manual registration

Measurement of static alignment of articulating joints is of clinical benefit and can be determined using image-based registration. We propose a method that could potentially improve the outcome of image-based registration by using initial manual registration. Magnetic resonance images of two wrist specimens were acquired in the relaxed position and during simulated grasp. Transformations were determined from voxel-based image registration between the two volumes. The volumes were manually aligned to match as closely as possible before auto-registration, from which standard transformations were obtained. Then, translation/rotation perturbations were applied to the manual registration to obtain altered initial positions, from which altered auto-registration transformations were obtained. Models of the radiolunate joint were also constructed from the images to simulate joint contact mechanics. We compared the sensitivity of transformations (translations and rotations) and contact mechanics to altering the initial registration condition from the defined standard. We observed that with increasing perturbation, transformation errors appeared to increase and values for contact force and contact area appeared to decrease. Based on these preliminary findings, it appears that the final registration outcome is sensitive to the initial registration.     

Localized strain measurements of the intervertebral disc annulus during biaxial tensile testing

Both inter-lamellar and intra-lamellar failures of the annulus have been described as potential modes of disc herniation. Attempts to characterize initial lamellar failure of the annulus have involved tensile testing of small tissue samples. The purpose of this study was to evaluate a method of measuring local surface strains through image analysis of a tensile test conducted on an isolated sample of annular tissue in order to enhance future studies of intervertebral disc failure. An annulus tissue sample was biaxial strained to 10%. High-resolution images captured the tissue surface throughout testing. Three test conditions were evaluated: submerged, non-submerged and marker. Surface strains were calculated for the two non-marker conditions based on motion of virtual tracking points. Tracking algorithm parameters (grid resolution and template size) were varied to determine the effect on estimated strains. Accuracy of point tracking was assessed through a comparison of the non-marker conditions to a condition involving markers placed on tissue surface. Grid resolution had a larger effect on local strain than template size. Average local strain error ranged from 3% to 9.25% and 0.1% to 2.0%, for the non-submerged and submerged conditions, respectively. Local strain estimation has a relatively high potential for error. Submerging the tissue provided superior strain estimates.