Interaction of Trastuzumab with biomembrane models at air-water interfaces mimicking cancer cell surfaces

Trastuzumab (Tmab) is a monoclonal antibody administered as targeted therapy for HER2-positive breast cancer whose molecular interactions at the HER2 receptor microenvironment are not completely clarified yet. This paper describes the influence of Tmab in the molecular organization of films of biological-relevant molecules at the air water interface. For that, we spread components of tumorigenic and non-tumorigenic cells directly on the air-water interface. The physicochemical properties of the films were investigated with surface pressure-area isotherms and Brewster angle microscopy, and distinction between the cellular lines with higher or lower amount of HER2 could be detected based on the physicochemical properties of the interfacial films. The systems organized at the air-water interface were transferred to solid supports as Langmuir-Blodgett films and the nano-scale morphology investigated with atomic force microscopy. The overall results related to Tmab interacting with the films lead to the conclusion that Tmab tends to condense rich-HER2 films, causing irregular dimerization of the receptor protein, changing the membrane topography of the films, with formation of phases with different levels of reflectivity and aggregation morphology, and finally revealing that the interaction of the antibody with proteo-lipidic biointerfaces is modulated by the film composition. We believe that novel perspectives concerning the molecular interactions in the plasma membrane microenvironment through Langmuir monolayers can be obtained from this work in order to enhance the Tmab-based cancer therapy.     

DNA assisted fragmentation of nickel nanoparticle clusters and their spectral properties

Nickel nanoparticle (NiNP) clusters in the range of 60-70 nm size on interaction with herring-sperm DNA (B-DNA) form a self-assembled duplex helix DNA structure with fragmented NiNPs as small as 5-15 nm, as evident from atomic force microscopic studies. Scanning electron microscope (SEM) and transmission electron microscope (TEM) images also corroborate the findings. The properties of these self-assembled NiNPs-DNA structures have been further investigated by UV-visible, emission and circular dichroic (CD) spectral studies.     

Pinacyanol Erythrosinate as A Stain for Mast Cells

An alcoholic solution of the compound dye, pina-cyanol erythrosinate when diluted to the optimum dissociation point is a differential tissue stain which, in addition, selectively stains and differentiates mast cells. It can be made up and used like any other compound dye (e.g., Bowie's stain, neutral gentian, etc. or like a blood stain). It can be used after any of the common fixatives and has the advantage of selectively staining all types of mast cells in their various functional phases, even in those species (notably rabbit and man) in which they may be difficult to demonstrate with other mast cell stains after aqueous fixatives.     

Impedance analysis of valinomycin activity in nano-BLMs

Nano-black lipid membranes (nano-BLMs) were obtained by functionalization of highly ordered porous alumina substrates with an average pore diameter of 60 nm based on a self-assembled alkanethiol submonolayer followed by spreading of 1,2-diphytanoyl-sn-glycero-3-phosphocholine dissolved in n-decane on the hydrophobic substrate. By means of impedance spectroscopy, we analyzed the influence of the self-assembled alkanethiol submonolayer on the electrical properties of the nano-BLMs as well as their long-term stability. We were able to stably integrate nano-BLMs into a flow through system, which allowed us to readily exchange buffer solutions several times and accounts for mass transport phenomena. The ionophore valinomycin was successfully inserted into nano-BLMs and its transport activity monitored as a function of different potassium and sodium ion concentrations reflecting the specificity of valinomycin for potassium ions.     

Determination of nanomolar uric and ascorbic acids using enlarged gold nanoparticles modified electrode

Individual and simultaneous determination of 50 nM uric acid (UA) and ascorbic acid (AA) using enlarged, citrate-stabilized gold nanoparticles (AuNPs) self-assembled to 2,5-dimercapto-1,3,4-thiadiazole (DMT) monolayer modified Au (Au/DMT) electrode by an amperometric method is described for the first time. Self-assembly of AuNPs on the electrode surface was confirmed by atomic force microscopy (AFM), attenuated total reflectance FT-IR and diffuse reflectance spectral measurements. The electron transfer reaction (ETR) of [Fe(CN)₆]^3−/4− was blocked at Au/DMT electrode, whereas it was restored with a peak separation of 200 mV after the attachment of AuNPs on the Au/DMT (Au/DMT/AuNPs) electrode, which was confirmed from the ETR of the [Fe(CN)₆]^3−/4− redox couple. When the self-assembled AuNPs were enlarged by hydroxylamine seeding, the ETR of [Fe(CN)₆]^3−/4− was improved significantly with a peak separation of 100 mV. Tapping mode AFM showed that the average size of the enlarged-AuNPs (E-AuNPs) was 50-70 nm. The E-AuNPs modified electrode catalyzes the oxidation of AA and UA, separates their voltammetric signals by 200 mV, and has excellent sensitivity towards AA and UA with a detection limit of 50 nM. The practical application of the modified electrode was demonstrated by measuring the concentration of UA in blood serum and urine.     

Measurement of intracellular volume in monolayers of cultured cells

Summary Methods have been developed for measuring the intracellular water space (ICS) in cultured diploid fibroblast monolayers. The values obtained have been compared to similar measurements of ICS in suspended fibroblasts using an oil spin method. Markers commonly used for measurement of total water space (TWS) ([³H]H₂O, [¹⁴C]urea) and extracellular space (ECS) ([³H]inulin, [¹⁴C]l-glucose, [³H]sucrose, [³H]d-mannitol) were investigated for use in cell monolayers. Monolayer incubations were terminated by rapidly rinsing the culture dishes three times with ice cold buffer. The distribution volume of the TWS marker [¹⁴C]urea plateaued at 10 to 15 min and was independent of urea concentration. [³H]H₂O was not a suitable marker for measuring total water space in cell monolayers because of rapid loss of intracellular label during rinsing. Intracellular space was calculated by subtracting [³H]sucrose space (5 min) from [¹⁴C]urea space (20 min) after incubation of fibroblasts with both markers. Values obtained for ICS (mean ± SE;μl/10⁶ cells) of fibroblasts from two cell lines measured in monolayer (1.74±0.11 and 1.60±0.10) and in suspension (1.88±0.07 and 1.78±0.11) was approximately 10% smaller than the values for cell size (2.01 and 2.22) obtained from Coulter Counter sizing. Thus, the methods developed for measurement of ICS in monolayer fibroblasts yield data comparable to those obtained with the more standard oil spin method. Furthermore, the methods can be applied to measurement of ICS in other types of adherent cells. This work was supported in part by funds from the National Institutes of Health Contract N01-AM-9212.     

Preparation and characterization of nitrilotriacetic-acid-terminated self-assembled monolayers on gold surfaces for matrix-assisted laser desorption ionization-time of flight-mass spectrometry analysis of proteins and peptides

On-target affinity capture, enrichment and purification of biomolecules improve detection of specific analytes from complex biological samples in matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis. In this paper, we report a simple method for preparation of a self-assembled nitrilotriacetic acid (NTA) monolayer on gold surface which can be used as a MALDI-TOF-MS sample target specifically for recombinant oligohistidine-tagged proteins/peptides and phosphorylated peptides. The NTA functional groups are immobilized to the gold surface via the linkage of 1,8-octanedithiol which forms a self-assembled monolayer on gold. Characterization by X-ray photoelectron spectroscopy and MALDI analysis of the modified surface are described. The chemically modified surface shows strong affinity toward the analytes of interest, which allows effective removal of the common interferences, e.g. salts and detergents, and therefore leads to improved signal/noise ratio and detection limit. The use of the modified surface simplifies the sample preparation for MALDI analysis of these targeted analytes.     

The hydrolysis of new lipid-like substrates and trilaurin in monolayers catalyzed with the lipase fromPseudomonas fluorescens

A simple method for determining the enzymic hydrolysis parameters of lipid-like substrates and trilaurin assembled in monolayers at the water-air interface was suggested. At a surface pressure of 10 mN/m, the initial rates of lipolysis were found to be proportional to the decrease in area of the substrate monolayer caused by the enzymic hydrolysis in a single-compartment Langmuir balance. The kinetic parameters for the hydrolysis of trilaurin and three 1,3-dilaurylpseudoglycerides acetylated in position 2 with an amino acid (phenylalanine, leucine, or valine) catalyzed with lipase fromPseudomonas fluorescens were determined. Unlike models of enzymic hydrolysis that neglect the thickness of the substrate monolayer, our method allows the determination of kinetic parameters in standard dimensions. The values ofk _cat for the synthetic pseudoglycerides were found to be significantly higher than that for trilaurin, while the values ofK _m(app) were close. This may be due to the presence of positively charged primary amino groups in the molecules of pseudoglycerides.     

Donor‐Acceptor Interfacial Interactions Dominate Device Performance in Hybrid P3HT‐ZnO Nanowire‐Array Solar Cells

The adsorption of self‐assembled monolayers (SAMs) on metal oxide surfaces is a promising route to control electronic characteristics and surface wettability. Here, arylphosphonic acid derivatives are used to modulate the surface properties of vertically oriented ZnO nanowire arrays. Arylphosphonate‐functionalized ZnO nanowires are incorporated into hybrid organic‐inorganic solar cells in which infiltrated poly(3‐hexylthiophene) (P3HT) serves as the polymer donor. Strong correlations between device short‐circuit current density (J _sc) and power conversion efficiencies (PCEs) with ZnO surface functionalization species are observed and a weak correlation in the open‐circuit voltage (V _oc) is observed. Inverted solar cells fabricated with these treated interfaces exhibit PCEs as high as 2.1%, primarily due to improvements in J _sc. Analogous devices using untreated ZnO arrays having efficiencies of 1.6%. The enhancement in J _sc is attributed to surface passivation of ZnO by SAMs and enhanced wettability from P3HT, which improve charge transfer and reduce carrier recombination at the organic‐inorganic interface in the solar cells.