Characterization of robust optimization for VMAT plan for liver cancer

PurposeWe investigated the feasibility of robust optimization for volumetric modulated arc therapy (VMAT) stereotactic body radiation therapy (SBRT) for liver cancer in comparison with planning target volume (PTV)-based optimized plans. Treatment plan quality, robustness, complexity, and accuracy of dose delivery were assessed.MethodsTen liver cancer patients were selected for this study. PTV-based optimized plans with an 8-mm PTV margin and robust optimized plans with an 8-mm setup uncertainty were generated. Plan perturbed doses were evaluated using a setup error of 8 mm in all directions from the isocenter. The dosimetric comparison parameters were clinical target volume (CTV) doses (D_98%, D_50%, and D_2%), liver doses, and monitor unit (MU). Plan complexity was evaluated using the modulation complexity score for VMAT (MCSv).ResultsThere was no significant difference between the two optimizations with respect to CTV doses and MUs. Robust optimized plans had a higher liver dose than did PTV-based optimized plans. Plan perturbed dose evaluations showed that doses to the CTV for the robust optimized plans had small variations. Robust optimized plans were less complex than PTV-based optimized plans. Robust optimized plans had statistically significant fewer leaf position errors than did PTV-based optimized plans.ConclusionsComparison of treatment plan quality, robustness, and plan complexity of both optimizations showed that robust optimization could be feasibile for VMAT of liver cancer.     

Mixture design as a potential tool in modeling the effect of light wavelength on Dunaliella salina cultivation: an alternative solution to increase microalgae lipid productivity for biodiesel production

Abstract

For a feasible microalgae biodiesel, increasing lipid productivity is a key parameter. An important cultivation parameter is light wavelength (λ). It can affect microalgal growth, lipid yield, and fatty acid composition. In the current study, the mixture design was used as an alternative to model the influence of the λ on the Dunaliella salina lipid productivity. The illumination was considered to be the mixture of different λ (the light colors blue, red, and green). All experiments were performed with and without sodium acetate (4?g/L), as carbon source, allowing the identification of the impact of the cultivation regimen (autotrophic or mixotrophic). Without sodium acetate, the highest lipid productivity was obtained using blue and red light. The use of mixotrophic cultivations significantly enhanced the results. The optimum obtained result was mixotrophic cultivation under 65% blue and 35% green light, resulting in biomass productivity of 105.06 mgL^?1day^?1, a lipid productivity of 53.47 mgL^?1day^?1, and lipid content of 50.89%. The main fatty acids of the oil obtained in this cultivation were oleic acid (36.52%) and palmitic acid (18.31%).     

Mdm2 inhibitors as a platform for the design of P-glycoprotein inhibitors

Chemoresistance is thought to be the cause of low treatment efficacy and mortality in more than 90% of patients with advanced cancer. The activation of drug efflux by P-glycoprotein is the key mechanism of resistance. All known P-gp inhibitors are used only in the combination therapy. We propose a new approach based on the multitarget rational design of drugs, which possess both the antitumor and efflux pump inhibitory activity. In this work, the principle possibility of combining the ability to inhibit P-gp and p53-Mdm2 protein-protein interaction in one structure is considered. The biological activity of a number of known and newly synthesized compounds was evaluated using cell lines with different p53 status. The possibility of using computer modeling for the search for P-glycoprotein inhibitors among Mdm2 inhibitors was analyzed; P-gp interaction site and binding modes of substrates and inhibitors were identified. The results obtained in cells that have the native balance of drug resistance and sensitivity showed the ability of the cells to both actively throw out xenobiotics and to lose this ability using P-gp inhibitors. The data obtained indicate that Mdm2 inhibitors are a promising platform for the development of multitarget drugs that can overcome tumor resistance by inhibiting the P-glycoprotein activity.     

HIV-1 Env三聚体抗原改造研究进展

HIV-1疫苗研发是当前艾滋病研究的一大热点,其病毒表面包膜糖蛋白Env三聚体介导病毒与细胞融合,是HIV-1疫苗研究的重要靶点。因此,设计并在体外表达类天然Env三聚体对HIV-1疫苗的研发具有重要的意义。近年来,Env三聚体研究取得了显著的进展。SOSIP、NFL2P、UFO等抗原改造方法实现了类天然Env三聚体的体外表达,逐步解决了改造抗原产量低、结构不稳定等问题,且表达的Env三聚体抗原能在动物免疫中诱导机体产生较高的中和抗体水平。Env三聚体改造方法促进了HIV-1疫苗的研究。文中综述了SOSIP、NFL2P、UFO三种HIV-1 Env三聚体抗原改造方法,对比各个改造方法优缺点,并结合自身工作提出相关建议,为后续HIV-1抗原的相关设计提供指导。     

肝素C5异构酶的表达优化及分子改造

肝素和硫酸乙酰肝素是一类应用于临床抗凝血的糖胺聚糖。肝素葡萄糖醛酸C5异构酶(Heparosan-N-sulfate-glucuronate 5-epimerase,C5,EC 5.1.3.17) 是肝素和硫酸乙酰肝素合成过程中重要的修饰酶,催化N-硫酸化肝素前体 (N-sulfoheparosan) 的D-葡萄糖醛酸 (D-GlcA) 上5号位羧基翻转生成L-艾杜糖醛酸 (L-iduronic acid,L-IdoA)。文中以大肠杆菌Escherichia coli为宿主对斑马鱼来源的肝素葡萄糖醛酸C5异构酶基因Glce进行重组表达优化与分子改造。比较了3种不同的表达载体pET20b(+)、pET28a(+) 和pCold Ⅲ对C5表达的差异情况,其中以嗜冷启动型载体pCold Ⅲ表达酶活最高,达到(1 873.61±5.42) U/L。为了进一步提高C5的可溶表达量,在N端融合促溶标签SET2后,可溶蛋白表达量比对照提高了50%,酶活达到 (2 409.25±6.43) U/L。在此基础上,通过理性设计对底物结合口袋进行定点突变,获得最优突变体 (V153R) 的酶活和比酶活分别为 (5 804.32±5.63) U/L和(145.14±2.33) U/mg,是原始酶的2.41倍和2.28倍。肝素C5异构酶改造与表达优化为酶法催化合成肝素奠定了基础。     

Rational design,synthesis and biological profiling of new KDM4C inhibitors

The human histone demethylases of the KDM4 family have been related to diseases such as prostate and breast cancer. Majority of currently known inhibitors suffer from the low permeability and low selectivity between the enzyme isoforms. In this study, toxoflavin motif was used to design and synthesize new KDM4C inhibitors with improved biological activity and in vitro ADME properties. Inhibitors displayed good passive cellular permeability and metabolic stability. However, diminishing of redox liability and consequently non-specific influence on cell viability still remains a challenge.     

The AutoDock suite at 30

The AutoDock suite provides a comprehensive toolset for computational ligand docking and drug design and development. The suite builds on 30 years of methods development, including empirical free energy force fields, docking engines, methods for site prediction, and interactive tools for visualization and analysis. Specialized tools are available for challenging systems, including covalent inhibitors, peptides, compounds with macrocycles, systems where ordered hydration plays a key role, and systems with substantial receptor flexibility. All methods in the AutoDock suite are freely available for use and reuse, which has engendered the continued growth of a diverse community of primary users and third‐party developers.     

Extension of a de novo TIM barrel with a rationally designed secondary structure element

The ability to construct novel enzymes is a major aim in de novo protein design. A popular enzyme fold for design attempts is the TIM barrel. This fold is a common topology for enzymes and can harbor many diverse reactions. The recent de novo design of a four‐fold symmetric TIM barrel provides a well understood minimal scaffold for potential enzyme designs. Here we explore opportunities to extend and diversify this scaffold by adding a short de novo helix on top of the barrel. Due to the size of the protein, we developed a design pipeline based on computational ab initio folding that solves a less complex sub‐problem focused around the helix and its vicinity and adapt it to the entire protein. We provide biochemical characterization and a high‐resolution X‐ray structure for one variant and compare it to our design model. The successful extension of this robust TIM‐barrel scaffold opens opportunities to diversify it towards more pocket like arrangements and as such can be considered a building block for future design of binding or catalytic sites.