基于比较基因组学的高地芽孢杆菌6ww6分子标识筛选及其快速鉴定

【目的】高地芽孢杆菌(Bacillus altitudinis) 6ww6是一株根际耐盐促生菌,可以作为微生物肥料的优选菌种。为了加强菌种知识产权保护,建立菌株快速检测方法。【方法】本研究通过基因组比对分析、TBLASTn检索、NR库检索验证并剔除有其他同源的结果序列,最终得到菌株6ww6的孤儿基因,设计引物进行PCR鉴定。【结果】筛选出5个特异性基因J939_13195、J9319_05960、J9319_13355、J9319_05965和J9319_13350。引物5960F和5960R可以单一性扩增出菌株6ww6的目的基因J9319_05960,确定其为菌株6ww6的特异性分子标识。【结论】本研究确定了菌株6ww6的唯一性身份编码,建立了以比较基因组学和孤儿基因为基础的菌株水平上的鉴定方法。该方法具有快速、精确、能鉴定到菌株水平的优点,对于有价值微生物的知识产权保护提供了有力的抓手。     

气候和流域特征变化对淮河流域地表水文过程的影响

定量认识和理解气候与流域特征变化对淮河流域地表水文过程的影响,可以为科学管理淮河流域水资源提供重要的理论参考和技术支撑。评估了多控制因子联立求解归因方法的适用性,以此量化了淮河流域气候和Budyko参数n对不同年代蒸散发(ET)、径流变化(较基准期1961—1980年)的贡献,并且进行了归因分析,结果表明：1)多控制因子联立求解法可以准确有效地分离气候和参数n对ET和径流变化的贡献。2)在气候和参数n变化的共同影响下,20世纪80年代、90年代的ET和径流在沂沭泗河各水文分区均呈减小趋势,而在上游和中游各水文分区的变化则表现出明显的时空差异性。3)就各年代控制ET变化的主要因子,多数水文分区为参数n,其次为降水和潜在蒸散发(PET),分别集中在沂沭泗河地区和淮河上游。20世纪80年代,中游水文分区径流变化的主控因子为PET,其他水文分区则多为降水;而20世纪90年代和21世纪初多数水文分区的主控因子为参数n,其次为降水。总之,控制淮河流域ET和径流变化的物理机制具有明显的空间差异和年代际变化特征。     

西南三江(金沙江、澜沧江和怒江)流域化学风化过程

选择中国西南三江流域作为研究对象,结合水化学及溶解性无机碳碳同位素,借助正演模型,分析河水溶解性组分来源及混入比例,说明硫酸参与区域碳酸盐矿物风化过程及CO2净释放量。结果表明:(1)西南三江流域河水受复杂岩性控制,金沙江河水以Na-Ca-Cl-HCO3为主,与流域上游蒸发盐矿物溶解有关,澜沧江和怒江则以Ca-HCO3为主,显示碳酸盐和硅酸盐矿物溶解的影响;(2)蒸发盐矿物溶解是金沙江干流河水阳离子主要来源,其贡献均值为52%,对澜沧江和怒江河水贡献较小,平均值分别为11%和2%。碳酸盐矿物溶解是澜沧江和怒江干流河水阳离子主要来源,其贡献均值分别为70%和78%,对金沙江干流河水的贡献较小,平均为38%,但对金沙江支流河水的贡献较大,平均为74%。硅酸盐风化产物对金沙江、澜沧江和怒江干流的平均贡献分别为8%、16%和15%,对金沙江支流河水的贡献为15%;(3)金沙江、澜沧江和怒江流域硅酸盐矿物风化速率分别为1.39、3.27和4.27 t·km-2·a-1,CO2消耗速率分别为0.34×105、1.18×105和1.40×105mol·km-2·a-1,碳酸盐矿物风化速率分别为16.93、33.13和33.54 t·km-2·a-1,CO2消耗速率分别为1.40×105、2.47×105和2.22×105mol·km-2·a-1;(4)西南三江流域河水硫酸盐主要来源于硫化物矿物氧化,硫酸参与碳酸盐矿物风化净释放CO2量分别为0.73×105、3.01×105和4.27×105mol·km-2·a-1,高于中国贵州地区,应当在研究区域碳循环以及全球气候变化过程中引起重视。     

Biomimetic repeat protein derived from Xenopus tropicalis for fibrous scaffold fabrication

Collagen, silk, and elastin are the fibrous proteins consist of representative amino acid repeats. Because these proteins exhibited distinguishing mechanical properties, they have been utilized in diverse applications, such as fiber‐based sensors, filtration membranes, supporting materials, and tissue engineering scaffolds. Despite their infinite prevalence and potential, most studies have only focused on a few repeat proteins. In this work, the hypothetical protein with a repeat motif derived from the frog Xenopus tropicalis was obtained and characterized for its potential as a novel protein‐based material. The codon‐optimized recombinant frog repeat protein, referred to as ‘xetro’, was produced at a high rate in a bacterial system, and an acid extraction‐based purified xetro protein was successfully fabricated into microfibers and nanofibers using wet spinning and electrospinning, respectively. Specifically, the wet‐spun xetro microfibers demonstrated about 2‐ and 1.5‐fold higher tensile strength compared with synthetic polymer polylactic acid and cross‐linked collagen, respectively. In addition, the wet‐spun xetro microfibers showed about sevenfold greater stiffness than collagen. Therefore, the mass production potential and greater mechanical properties of the xetro fiber may result in these fibers becoming a new promising fiber‐based material for biomedical engineering. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 659–664, 2015.     

Property and wealth inequality as cultural niche construction

In contrast to other approaches, evolutionary perspectives on understanding the power and wealth inequalities in human societies view wealth and power not as ends in themselves but as proximate goals that contribute to the ultimate Darwinian goal of achieving reproductive success. The most successful means of achieving it in specific times and places depend on local conditions and these have changed in the course of human history, to such an extent that strategies focused on the maintenance and increase of wealth can even be more successful in reproductive terms than strategies directed at maximizing reproductive success in the short term. This paper argues that a major factor leading to such changes is a shift in the nature of inter-generational wealth transfers from relatively intangible to material property resources and the opportunities these provided for massively increased inequality. This shift can be seen as a process of niche construction related to the increasing importance of fixed and defensible resources in many societies after the end of the last Ice Age. It is suggested that, despite problems of inference, the evidence of the archaeological record can be used to throw light on these processes in specific places and times.     

哺乳动物毛被传热性能及其影响因素

毛被能够加强或减弱动物向周围环境的热量散失,毛被的形态结构和颜色是传热性能的决定因素,其传热过程往往是传导、对流和辐射3个过程的耦合。以往研究发现环境因子中,风可增加机体向环境中的散热速率,且散失量与风速正相关,且动物通过调节在风场中的姿态来适应不同风向。动物体与环境间的温差是影响散热速率的另一因素,不同环境中的动物通过改变毛被结构来适应温差变化。毛被含水率上升会引起导热和蒸发冷却作用加强,动物通过行为或毛被结构变化来调节毛被含水率。毛色决定毛被吸收和反射热辐射的能力。毛被传热性能直接把动物的生理特点与环境因子关联起来,这对揭示动物的适应、进化都具有重要意义。同时提出,毛被结构和传热性能的研究还有助于仿生学意义的挖掘。因此,今后应重点在毛被结构和物理性能、研究技术与方法以及毛被生物学和仿生学意义等方面开展研究。     

米曲霉耐热木聚糖酶纯化及酶学特性研究

对米曲霉原始发酵液中耐热木聚糖酶进行纯化和酶学特性研究,利用甘蔗渣为碳源培养米曲霉,通过超滤和阴离子交换柱两步纯化得到木聚糖酶XynH1,分子量35．402kDa,利用飞行时间质谱和SDS—PAGE分析,推断XynH1为XylanaseXynF1,分子量为35．402kDa。XynH1属于糖苷水解酶家族10,酶活为442．2IU／nag,最适pH和温度分别为pH6．0和65℃,80℃以下及pH4．0～10．5范围内较稳定。     

种植条件下海滨盐土理化性状与生物学特征

以苏北海滨盐土种植实验区7个不同特征的地块为对象,研究了海滨盐土基本理化性状及其生物学特征的季节变化,以及其与植物种植和植被条件的关系.结果表明:海滨盐土的土壤性状随种莓年限和植被状况的不同有较大的变异性,种植耐盐植物地块平均土壤电导率(0.95 dS·m-1)低于自然植被地块(2.77 dS·m-1),但部分地块电导率水平较种植前有所升高;土壤肥力普遍较低,水解性氮含量平均低于50 mg·kg-1,有效磷含量(除施肥地块)平均低于3 mg·kg-1,有机质含量低于1%,种植耐盐植物地块因施肥而有所改善.土壤电导率和养分水平是影响盐土植被生长与分布的主要因素,前者尤为关键;土壤氮磷含量与微生物数量密切相关.不同植被和干扰状况下土壤性状的季节变化差异明显,植被盖度高、人为干扰少的土壤环境相对稳定,反之则波动剧烈.     

假单胞菌N-13中丝氨酸羟甲基转移酶的酶学性质研究

从产L-丝氨酸菌株假单胞菌N-13中纯化了丝氨酸羟甲基转移酶,并对其性质进行了研究.结果表明,丝氨酸羟甲基转移酶酶活力在pH=7.0～9.0间稳定,最适宜pH=8.0;酶的最适温度为35℃,在30～40℃水浴30 min酶活力未见明显下降.磷酸吡哆醛的最适添加浓度为25 μmol·L-1.研究了不同金属离子对酶活力的影...     

Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing

Polymer:fullerene blends were screened in a combinatorial approach using inkjet printing thin film libraries for photovoltaic devices. The application of inkjet printing enabled a fast and simple experimental workflow from film preparation to the study of structure‐property‐relationships with a very high material efficiency. Inkjet printing requires less material for the preparation of thin film libraries in comparison to other dispensing techniques, like spin‐coating. Two polymers (PCPDTBT, PSBTBT) and two fullerene derivatives (mono‐PCBM, bis‐PCBM) were investigated in various blend ratios, concentrations, solvent ratios, and film thicknesses. Morphological and optical properties of the inkjet printed films were investigated and compared with spin‐coated films. This study shows the principle of an experimental setup from solution preparation to film characterization for the combinatorial investigation of large polymer:fullerene libraries.