Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Recently, two‐dimensional (2D) structure on three‐dimensional (3D) perovskites (graded 2D/3D) has been reported to be effective in significantly improving both efficiency and stability. However, the electrical properties of the 2D structure as a passivation layer on the 3D perovskite thin film and resistance to the penetration of moisture may vary depending on the length of the alkyl chain. In addition, the surface defects of the 2D itself on the 3D layer may also be affected by the correlation between the 2D structure and the hole conductive material. Therefore, systematic interfacial study with the alkyl chain length of long‐chained alkylammonium iodide forming a 2D structure is necessary. Herein, the 2D interfacial layers formed are compared with butylammonium iodide (BAI), octylammonium iodide (OAI), and dodecylammonium iodide (DAI) iodide on a 3D (FAPbI₃)_0.95(MAPbBr₃)_0.05 perovskite thin film in terms of the PCE and humidity stability. As the length of the alkyl chain increased from BA to OA to DA, the electron‐blocking ability and humidity resistance increase significantly, but the difference between OA and DA is not large. The PSC post‐treated with OAI has slightly higher PCE than those treated with BAI and DAI, achieving a certified stabilized efficiency of 22.9%.     

Strong Interplay between Sodium and Oxygen in Kesterite Absorbers: Complex Formation,Incorporation, and Tailoring Depth Distributions

Sodium and oxygen are prevalent impurities in kesterite solar cells. Both elements are known to strongly impact performance of the kesterite devices and can be connected to efficiency improvements seen after heat treatments. The sodium distribution in the kesterite absorber is commonly reported, whereas the oxygen distribution has received less attention. Here, a direct relationship between sodium and oxygen in kesterite absorbers is established using secondary ion mass spectrometry and explained by defect analyses within the density functional theory. The calculations reveal a binding energy of 0.76 eV between the substitutional defects Na_Cu and O_S in the nearest neighbor configuration, indicating an abundance of Na? O complexes in kesterite absorbers at relevant temperatures. Oxygen incorporation is studied by introducing isotopic ¹⁸O at different stages of the Cu₂ZnSnS₄/Mo/soda‐lime glass baseline processing. It is observed that oxygen from the Mo back contact and contaminations during the sulfurization are primary contributors to the oxygen distribution. Indeed, unintentional oxygen incorporation leads to immobilization of sodium. This results in a strong correlation between sodium and oxygen, in excellent agreement with the theoretical calculations. Consequently, oxygen availability should be monitored to optimize postdeposition heat treatments to control impurities in kesterite absorbers and ultimately, the solar cell efficiency.     

Direct Nanoscale Characterization of Deep Levels in AgCuInGaSe2 Using Electron Energy‐Loss Spectroscopy in the Scanning Transmission Electron Microscope

A new experimental framework for the characterization of defects in semiconductors is demonstrated. Through the direct, energy‐resolved correlation of three analytical techniques spanning six orders of magnitude in spatial resolution, a critical mid‐bandgap electronic trap level (E_V + 0.56 eV) within Ag_0.2Cu_0.8In_1?xGa_xSe₂ is traced to its nanoscale physical location and chemical source. This is achieved through a stepwise, site‐specific correlated characterization workflow consisting of device‐scale (≈1 mm²) deep level transient spectroscopy (DLTS) to survey the traps present, scanning probe–based DLTS (scanning‐DLTS) for mesoscale‐resolved (hundreds of nanometers) mapping of the target trap state's spatial distribution, and scanning transmission electron microscope based electron energy‐loss spectroscopy (STEM‐EELS) and X‐ray energy‐dispersive spectroscopy for nanoscale energy‐, structure, and chemical‐resolved investigation of the defect source. This first demonstration of the direct observation of sub‐bandgap defect levels via STEM‐EELS, combined with the DLTS methods, provides strong evidence that the long‐suspected Cu_In/Ga substitutional defects are indeed the most likely source of the E_V + 0.56 eV trap state and serves as a key example of this approach for the fundamental identification of defects within semiconductors, in general.     

Nanocomposite scaffold seeded with mesenchymal stem cells for bone repair

The mechanical property of bone tissue scaffolds is one of the most important aspects in bone tissue engineering that has remained problematic. In our previous study, we fabricated a three‐dimensional scaffold from nano‐hydroxyapatite/gelatin (nHA/Gel) and investigated its efficiency in promoting bone regeneration both in vitro and in vivo. In the present study, the effect of adding silicon carbide (SiC) on the mechanical and biological behaviors of the nHA/Gel/SiC and bone regeneration in vivo were determined. nHA and SiC were synthesized and characterized by the X‐ray diffraction pattern and transmission electron microscope image. Layer solvent casting, freeze drying, and lamination techniques were applied to prepare these scaffolds. Then, the biocompatibility and cell adhesion behavior of the synthesized nHA/Gel/SiC scaffolds were investigated. For in vivo studies, rats were categorized into three groups: blank defect, blank scaffold, and rat bone marrow mesenchymal stem cells (rBM‐MSCs)/scaffold. After 1, 4, and 12 weeks post‐injury, the rats were sacrificed and the calvaria were harvested. Sections with a thickness of 5 µm thickness were prepared and stained with hematoxylin–eosin and Masson's Trichrome, and immunohistochemistry was performed. Our results showed that SiC effectively increased the mechanical properties of the nHA/Gel/SiC scaffold. No significant differences were observed in biocompatibility, cell adhesion, and cytotoxicity of the nHA/Gel/SiC in comparison with the nHA/Gel nanocomposite. Based on histological and immunohistochemical studies, both osteogenesis and collagenization were significantly higher in the rBM‐MSCs/scaffold group, quantitatively and qualitatively. The present study strongly suggests the potential of SiC as an alternative strategy to improve the mechanical and biological properties of bone tissue engineering scaffolds, and shows that the pre‐seeded nHA/Gel/SiC scaffold with rBM‐MSCs improves osteogenesis in the engineered bone implant.     

Meltrin beta expressed in cardiac neural crest cells is required for ventricular septum formation of the heart

The heart is divided into four chambers by membranous septa and valves. Although evidence suggests that formation of the membranous septa requires migration of neural crest cells into the developing heart, the functional significance of these neural crest cells in the development of the endocardial cushion, an embryonic tissue that gives rise to the membranous appendages, is largely unknown. Mice defective in the protease region of Meltrin beta/ADAM19 show ventricular septal defects and defects in valve formation. In this study, by expressing Meltrin beta in either endothelial or neural crest cell lineages, we showed that Meltrin beta expressed in neural crest cells but not in endothelial cells was required for formation of the ventricular septum and valves. Although Meltrin beta-deficient neural crest cells migrated into the heart normally, they could not properly fuse the right and left ridges of the cushion tissues in the proximal outflow tract (OT), and this led to defects in the assembly of the OT and AV cushions forming the ventricular septum. These results genetically demonstrated a critical role of cardiac neural crest cells expressing Meltrin beta in triggering fusion of the proximal OT cushions and in formation of the ventricular septum.     

关节镜制备膝关节软骨缺损的动物模型

目的:经微创手术制备膝关节软骨缺损动物模型,减少因手术创伤造成对实验结果的影响。方法:关节镜下对9只山羊(9膝)进行关节面钻孔术,造成软骨缺损模型,对其缺损位置进行准确定位。结果:9只山羊(9膝)均在关节镜下顺利进行了关节软骨缺损模型的建立,并进行了缺损部位的定位。结论:对比开放性手术,经关节镜制备关节缺损模型是一种对实验干预最少的微创方法,有助于减少手术本身造成的实验误差。     

嗅鞘细胞复合PLGA导管修复周围神经缺损的研究

探讨嗅鞘细胞(OECs)复合聚乳酸-聚羟基乙酸共聚物(PLGA)导管对大鼠坐骨神经缺损的修复作用。方法:SD大鼠80只,随机分成4组,切除右侧部分神经干造成10mm的神经缺损。OECs PLGA组用充满细胞外基质凝胶和OECs悬液(CM-DiI预标记)的PLGA导管桥接坐骨神经缺损;OECs 硅胶管组用含相同内容物的硅胶管桥接;PLGA组和硅胶管组则分别用充满细胞外基质凝胶和DMEM/F12培养基的PLGA导管和硅胶管桥接。术后每周进行感觉运动功能检测,8周时行腓肠肌湿重恢复率、乙酰胆碱脂酶(AChE)染色、电生理和组织形态学分析等检测,同时移植细胞的两组每周进行细胞示踪观察。结果:移植细胞沿神经纵轴分布;除坐骨神经功能指数(SFI)指标外,OECs PLGA组的各项再生功能指标均优于其它三组。结论:OECs复合PLGA导管能够促进再生神经的成熟和靶组织功能的恢复,二者联合移植是一种有效的周围神经缺损修复方法。     

腓肠神经营养血管皮瓣修复跟骨骨折术后皮肤软组织缺损的临床研究

摘要 目的：探讨负压引流技术结合腓肠神经营养皮瓣在跟骨骨折钢板内固定术后皮肤软组织缺损的临床效果。方法：回顾性分析我院骨科2012年5月-2020年5月共31例跟骨骨折术后钢板外露,皮肤软组织缺损住院病人。纳入患者均使用负压引流技术结合腓肠神经营养皮瓣修复技术。创面给予彻底清创后行封闭负压吸引引流术,待创面新鲜后以腓肠神经营养皮瓣修复创面。对术后皮瓣成活情况;Maryland功能评分以及BMRC感觉功能评分进行综合评估。结果：术后2周时,28例皮瓣顺利成活,供区与受区伤口愈合良好,干燥、无渗出。3例术后出现皮瓣肿胀,皮瓣颜色发暗,伤口渗出较多,皮瓣边缘坏死,窦道形成等,给予切开引流、加强换药、敏感抗生素控制感染等治疗后,皮瓣成活。术后随访6-24个月皮瓣外观及功能恢复良好,无创面再坏死,裂开,感染等情况出现。其中2例再次入院行皮瓣整形术。术后6个月时,Maryland功能评分：优：17例;良：11例;优良率为：90.3%。BMRC感觉功能评分：S3-S4：20例;S2：8例;S1：3例。结论：腓肠神经营养皮瓣联合封闭负压吸引技术在跟骨骨折钢板内固定术后皮肤软组织缺损的治疗中能够缩短治疗时间,操作简单,疗效确切,可获得良好的修复效果。     

游离股前外侧皮瓣修复对急诊肢体复合组织缺损患者近期和远期预后的影响

摘要 目的：探讨与分析游离股前外侧皮瓣修复对急诊肢体复合组织缺损患者近期和远期预后的影响。方法：2015年4月到2021年9月选择在本院急诊的下肢复合组织缺损患者66例作为研究对象,根据1:1随机分配原则把患者分为研究组与对照组各33例。研究组给予游离股前外侧皮瓣修复治疗,对照组给予下肢外侧皮瓣修复治疗,观察与随访患者的近期和远期预后情况。结果：所有患者都顺利完成急诊修复治疗,所有皮瓣都创面都Ⅰ期愈合,研究组的术后住院时间、术后换药次数、术后上皮组织完全覆盖创面时间、术后创面愈合时间少于对照组（P<0.05）。研究组术后3个月的皮瓣血供优良率为100.0 %,高于对照组的84.8 %（P<0.05）。研究组术后3个月的血肿、伤口感染、血管危象、骨髓炎等并发症发生率为3.0 %,低于对照组的27.3 %（P<0.05）。研究组术后12个月的皮瓣保护性感觉率为100.0 %,高于对照组的78.8 %（P<0.05）。结论：游离股前外侧皮瓣修复在急诊肢体复合组织缺损患者的应用能促进患者康复,提高皮瓣血供优良率,还可减少并发症的发生,改善患者远期的皮瓣保护性感觉状况。     

A novel transmembrane MSP-containing protein that plays a role in right ventricle development

We have identified and characterized a gene, Mospd3 on mouse chromosome 5 using gene trapping in ES cells. MOSPD3 is part of a family of proteins, including MOSPD1, which is defined by the presence of a major sperm protein (MSP) domain and two transmembrane domains. Interestingly Mospd3 is mammalian specific and highly conserved between mouse and man. Insertion of the gene trap vector at the Mospd3 locus is mutagenic and breeding to homozygosity results in a characteristic right ventricle defect and neonatal lethality in 50% of mice. The phenotypic defect is dependent on the genetic background, indicating the presence of genetic modifier loci. We speculate that the further characterization of Mospd3 will shed light on the complex genetic interactions involved in cardiac development and disease.