Growth model for raceway pond cultivation of Desmodesmus sp. MCC34 isolated from a local water body

Biofuel production by microalgae has the advantage of higher biomass productivity over land crops. The selection of potential microalgae depends on the growth in outdoor mass cultivation during different seasons, which can be predicted by a mathematical model. Here, freshwater green algae were isolated from a local water body in Pilani, Rajasthan, India (geographical coordinates: 28°22′N 75°36′E) and characterized by microscopy and ribosomal RNA analysis. The strain was submitted to the Indian Agricultural Research Institute's microbial culture collection (IARI, India) and identified as Desmodesmus sp. MCC34. This strain, along with a fresh water green algae (Chlorella minutissima), two marine green algae species (Dunaliella salina and Dunaliella tertiolecta) and two nitrogen fixing cyanobacteria (Nostoc muscorum and Anabaena doliolum), were screened for lipid productivity and growth kinetics under culture room and raceway pond conditions. Desmodesmus sp. MCC34 showed the highest specific growth rate (0.26 day^?1), biomass production (1.9 g L^?1) and lipid productivity (103 mg L^?1 day^?1). The optimal temperature and saturating light intensity for maximal growth of Desmodesmus sp. MCC34 were 35 °C and 75 μmol m^?2 s^?1 with molar extinction coefficient of 0.22 m² g^?1, respectively. Desmodesmus sp. MCC34 was then subjected to outdoor cultivation in a 20‐m long raceway pond for 18 days during March and November 2013. The areal biomass productivity and volumetric biomass productivity were 13946.23 kg ha^?1 year^?1 and 56.94 mg L^? 1day^?1 during the month of March, decreasing to 6262.28 kg ha^?1 year^?1 and 25.57 mg L^? 1day^?1 during the month of November. A mathematical model was constructed to explain the relationship between biomass production and growth parameters such as temperature, light intensity and nutrient concentration. The productivity values predicted with the proposed model correspond well with the experimental data, suggesting the validity of the model.     

The potential of microalgal biotechnology: a review of production and uses of microalgae

An overview of the various aspects, promises and limitations of microalgal biotechnology is presented. The factors of importance in microalgal cultivation as well as the culture systems are briefly described. Microalgal biomasses can fulfil the nutritional requirements of aquatic larvae and organisms. The biochemical composition of algae can be improved by the manipulation of culture conditions. The nutritive value of the microalgal biomasses for human and animal consumption is also commented upon as well as some socio-economical aspects. Among the sources of required nutrients (N, P), wastewaters and manures can upgraded as culture media for microalgae the safety of which has to be evaluated. Harvesting of the biomass is one of the bottlenecks. The various techniques, physical, physico-chemical and biological are outlined and their feasibility and economic interest examined. Microalgal biomasses can be submitted to various technological transformations. Various processes are reviewed in the light of their effects on safety and nutritional value. The possible extraction of fine chemicals and the preparation of protein concentrates is also reported on. The various uses of microalgae lead to a possible competition, to be evaluated, between systems for the production of food, energy and chemicals. The review finally covers the application of genetic manipulation to microalgae.     

Molecular modelling,synthesis, and biological evaluations of a 3,5-disubstituted isoxazole fatty acid analogue as a PPARα-selective agonist

The peroxisome proliferator activated receptors (PPARs) are important drug targets in treatment of metabolic and inflammatory disorders. Fibrates, acting as PPARα agonists, have been widely used lipid-lowering agents for decades. However, the currently available PPARα targeting agents show low subtype-specificity and consequently a search for more potent agonists have emerged. In this study, previously isolated oxohexadecenoic acids from the marine algae Chaetoceros karianus were used to design a PPARα-specific analogue. Herein we report the design, synthesis, molecular modelling studies and biological evaluations of the novel 3,5-disubstituted isoxazole analogue 6-(5-heptyl-1,2-oxazol-3-yl)hexanoic acid (1), named ADAM. ADAM shows a clear receptor preference and significant dose-dependent activation of PPARα (EC₅₀ = 47 µM) through its ligand-binding domain (LBD). Moreover, ADAM induces expression of important PPARα target genes, such as CPT1A, in the Huh7 cell line and primary mouse hepatocytes. In addition, ADAM exhibits a moderate ability to regulate PPARγ target genes and drive adipogenesis. Molecular modelling studies indicated that ADAM docks its carboxyl group into opposite ends of the PPARα and -γ LBD. ADAM interacts with the receptor-activating polar network of amino acids (Tyr501, His447 and Ser317) in PPARα, but not in PPARγ LBD. This may explain the lack of PPARγ agonism, and argues for a PPARα-dependent adipogenic function. Such compounds are of interest towards developing new lipid-lowering remedies.     

Cell disruption methods for improving lipid extraction efficiency in unicellular microalgae

Identification of cost‐effective cell disruption methods to facilitate lipid extraction from microalgae represents a crucial step in identifying promising biofuel‐producing species. Various cell disruption methods including autoclaving, microwave, osmotic shock, and pasteurization were tested in the microalgae Chlorococcum sp. MCC30, Botryococcus sp. MCC31, Botryococcus sp. MCC32, and Chlorella sorokiniana MIC‐G5. Lipid content (on dry weight basis) from the four cultures on day 7 ranged from 11.15 to 48.33%, and on day 14 from 11.42 to 44.26%. Among the methods tested, enhanced lipid extraction was achieved through osmotic shock (15% NaCl) for Botryococcus sp. MCC32, microwave (6 min) for Botryococcus sp. MCC31, osmotic shock (5% NaCl) for Chlorella sorokiniana MIC‐G5 and microwave (2 min) for Chlorococcum sp. MCC30. The highest palmitate (16:0) contents (25.64% and 34.20%) were recorded with osmotic shock (15% NaCl) treatment for Botryococcus sp. MCC32 and microwave (6 min) for Botryococcus sp. MCC31, respectively. Two strains, along with their respective cell disruption methods, were identified as promising oil blends or nutraceuticals due to their high unsaturated fatty acid (UFA) content: Botryococcus sp. MCC31 (37.6% oleic acid content; 39.37% UFA) after autoclaving and Botryococcus sp. MCC32 after osmotic shock of 15% NaCl treatment (19.95% oleic acid content; 38.17% UFA).     

Study of a two-stage growth of DHA-producing marine algae <Emphasis Type="Italic">Schizochytrium limacinum</Emphasis> SR21 with shifting dissolved oxygen level

The culture protocol of Schizochytrium limacinum SR 21, a known docosahexaenoic acid (DHA) producing marine algae was modified in this study to better fit fermentation parameters, particularly control of dissolved oxygen (DO) to the known reproductive and growth biology of the microorganism. The cultures controlled at 50% DO saturation produced a cell density of 181 million cells/ml, whereas cultures with 10% DO produced only 98.4 million cells/ml. A fixed-agitation rate of 150 rpm resulted in an even lower density of 22.5 million cells/ml. Fifty percent DO saturation level led to a decreased pH, as well as a negative correlation with lipid accumulation, while low oxygen concentration was obligatory for lipid accumulation. This study indicated that high DO was preferred for the cells’ reproduction via release of zoospores. Thus, the culture of S. limacinum SR21 should be best divided into two stages: (1) a cell-number-increasing stage in which cell reproduction and cell number increase with little increase in the size and weight of each cell; and (2) a cell-size-increasing stage in which cells stop reproduction but cell size enlarges due to lipids accumulation. With such a protocol, the production of algae biomass and DHA was improved to levels of 37.9 g/L and 6.56 g/L, respectively. The two-stage culture process could be potentially used not only for omega-3 PUFA production, but also in other single cell oil (SCO)-producing processes, including biodiesel production from algae.     

Anaerobic digestion of microalgae as a necessary step to make microalgal biodiesel sustainable

The potential of microalgae as a source of biofuels and as a technological solution for CO₂ fixation is subject to intense academic and industrial research. In the perspective of setting up massive cultures, the management of large quantities of residual biomass and the high amounts of fertilizers must be considered. Anaerobic digestion is a key process that can solve this waste issue as well as the economical and energetic balance of such a promising technology. Indeed, the conversion of algal biomass after lipid extraction into methane is a process that can recover more energy than the energy from the cell lipids. Three main bottlenecks are identified to digest microalgae. First, the biodegradability of microalgae can be low depending on both the biochemical composition and the nature of the cell wall. Then, the high cellular protein content results in ammonia release which can lead to potential toxicity. Finally, the presence of sodium for marine species can also affect the digester performance. Physico-chemical pretreatment, co-digestion, or control of gross composition are strategies that can significantly and efficiently increase the conversion yield of the algal organic matter into methane. When the cell lipid content does not exceed 40%, anaerobic digestion of the whole biomass appears to be the optimal strategy on an energy balance basis, for the energetic recovery of cell biomass. Lastly, the ability of these CO₂ consuming microalgae to purify biogas and concentrate methane is discussed.     

微藻生物柴油的现状与进展

微藻生物柴油能够解决目前使用植物原料发展生物柴油面临的耕地不足、气候变化对产量影响大和引起农作物价格上涨等突出问题。通过转基因技术培育“工程微藻”,繁衍能力高,生长周期短,比陆生植物产油高出几十倍,并且能用海水作为其天然培养基进行工业化生产。介绍了微藻生物柴油的优势,高脂质微藻选育,以及工程微藻研究与下游生产工艺的研究现状和进展。     

Variations in the microalgal structure in paddy soil in Osaka, Japan: comparison between surface and subsurface soils

Seasonal variations in microalgal communities were compared between surface and subsurface paddy soils in Osaka, Japan. Soil samples were collected from depths of 0–1 (surface), 8–9, and 17–18 cm. Diatom cells were counted directly, and the numbers of other microalgae were estimated using a culture method. The microalgal community as well as the soil properties changed drastically in the surface soil as a consequence of alternate flooding and drainage. In the soil collected at a depth of 0–1 cm, the cell density of diatoms and the viable count of other microalgae markedly increased, and Chlorella spp., Nitzschia spp., and Navicula spp. were predominant during the flooding period, whereas Scenedesmus spp. and Hantzschia spp. were predominant during the drainage period. In contrast, in the soils collected at depths of 8–9 and 17–18 cm, the cell density of diatoms and the viable count of other microalgae remained constant. Despite the unavailability of light, a large number of microalgae were present in these subsurface soils throughout the annual cultivation cycle, and Scenedesmus spp. and Nitzschia spp. were always dominant. Cyanophytes were also present at all the depths but had low relative frequencies. These results suggest that the algae that are predominant in paddy soil can survive not only drastic changes in water content but also complete darkness.     

Influence of Primary Producers on Bioavailability of Desorption Resistant Organic Pollutants in the Sediments

The experiments were conducted on three freshwater microalgal strains, which were grown in the top chambers of retrofitted filter assemblies. The bottom receivers contained control sediments and two types of ¹⁴C-labeled, phenanthrene contaminated sediments. The first contaminated sediment had both the reversible and desorption resistant fractions (referred to as partially washed sediment), while the second contaminated sediment had the desorption resistant fraction only (completely washed sediment). A second set of controls was added to isolate the effect of microalgae. Despite minor variations in toxicity, there was no significant difference (P > 0.05) between the growth curves of the three algal strains. From a bioavailability perspective, there was a significant difference (P < 0.05) in desorption rates in chambers containing microalgae. Pooled data from the three cultures indicated that, for assemblies with desorption resistant sediment (completely washed) and microalgae, the top chamber phenanthrene concentrations were approximately 90–100% of the theoretical maximum concentrations. However, filter assemblies without microalgae had only 5–6% of the theoretical maximum. Results also indicated that approximately 91.7–92.4% of the desorbed phenanthrene is directly sequestered by the microalgae in assemblies with the completely washed sediment. These results indicated that the term “desorption-resistant” fraction from a purely physical perspective may not be truly desorption-resistant in presence of microalgae.