Synergistic Impact of Solvent and Polymer Additives on the Film Formation of Small Molecule Blend Films for Bulk Heterojunction Solar Cells

The addition of polystyrene (PS), a typical insulator, is empirically shown to increase the power conversion efficiencies (PCEs) of a solution‐deposited bulk heterojunction (BHJ) molecular blend film used in solar cell fabrication: p‐DTS(FBTTh₂)₂/PC₇₁BM. The performance is further improved by small quantities of diiodooctane (DIO), an established solvent additive. In this study, how the addition of PS and DIO affects the film formation of this bulk heterojunction blend film are probed via in situ monitoring of absorbance, thickness, and crystallinity. PS and DIO additives are shown to promote donor crystallite formation on different time scales and through different mechanisms. PS‐containing films retain chlorobenzene solvent, extending evaporation time and promoting phase separation earlier in the casting process. This extended time is insufficient to attain the morphology for optimal PCE results before the film sets. Here is where the presence of DIO comes into play: its low vapor pressure further extends the time scale of film evolution and allows for crystalline rearrangement of the donor phase long after casting, ultimately leading to the best BHJ organization.     

High Performance Flexible Supercapacitor Electrodes Composed of Ultralarge Graphene Sheets and Vanadium Dioxide

Little is known regarding the effect of the graphene lateral size on the electrochemical performance of hybrid graphene electrode. This work examines the electrochemical performance of a flexible hybrid supercapacitor electrode composed of ultralarge graphene oxide (UGO; mean lateral size of 47 ± 22 μm) and vanadium dioxide (VO₂) nanobelts, referring to a reference electrode composed of small scale graphene oxide (SGO; mean lateral size of 0.8 ± 0.5 μm) and VO₂.Thermal treatment converts UGO/VO₂ and SGO/VO₂ to URGO/VO₂ (denoted VURGO) and SRGO/VO₂ (denoted VSRGO) electrodes, respectively. The sheet resistance of the VURGO film (0.57 ± 0.03 kΩ sq.^–1) was two orders of magnitude lower than that of the VSRGO (55.74 ± 9.35 kΩ sq.^–1). The VURGO hybrid electrode showed a specific capacitance of 769 F g^?1, which was significantly better than the corresponding values for the VSRGO electrode (385 F/g). These results support the notion that the use of ultralarge graphene sheets (≈22 500 μm²) lowers the intersheet resistance due to the presence of fewer intersheet tunneling barriers. This article highlights the potential utility of URGO (as a conductive support) in hybrid electrode containing VO₂ nanobelts for high performance flexible hybrid supercapacitor.     

Fractional killing arises from cell‐to‐cell variability in overcoming a caspase activity threshold

When cells are exposed to death ligands such as TRAIL, a fraction undergoes apoptosis and a fraction survives; if surviving cells are re‐exposed to TRAIL, fractional killing is once again observed. Therapeutic antibodies directed against TRAIL receptors also cause fractional killing, even at saturating concentrations, limiting their effectiveness. Fractional killing arises from cell‐to‐cell fluctuations in protein levels (extrinsic noise), but how this results in a clean bifurcation between life and death remains unclear. In this paper, we identify a threshold in the rate and timing of initiator caspase activation that distinguishes cells that live from those that die; by mapping this threshold, we can predict fractional killing of cells exposed to natural and synthetic agonists alone or in combination with sensitizing drugs such as bortezomib. A phenomenological model of the threshold also quantifies the contributions of two resistance genes (c‐FLIP and Bcl‐2), providing new insight into the control of cell fate by opposing pro‐death and pro‐survival proteins and suggesting new criteria for evaluating the efficacy of therapeutic TRAIL receptor agonists.     

Formation of Thick Dense Yttrium Iron Garnet Films Using Aerosol Deposition

Aerosol deposition (AD) is a thick-film deposition process that can produce layers up to several hundred micrometers thick with densities greater than 95% of the bulk. The primary advantage of AD is that the deposition takes place entirely at ambient temperature; thereby enabling film growth in material systems with disparate melting temperatures. This report describes in detail the processing steps for preparing the powder and for performing AD using the custom-built system. Representative characterization results are presented from scanning electron microscopy, profilometry, and ferromagnetic resonance for films grown in this system. As a representative overview of the capabilities of the system, focus is given to a sample produced following the described protocol and system setup. Results indicate that this system can successfully deposit 11 µm thick yttrium iron garnet films that are  > 90% of the bulk density during a single 5 min deposition run. A discussion of methods to afford better control of the aerosol and particle selection for improved thickness and roughness variations in the film is provided.     

Agonist antibody activates death receptor 6 downstream signaling involving TRADD recruitment

Death receptor 6 (DR6) is a member of the death domain-containing receptors that belong to the TNFR superfamily. To date, the ligand for DR6 is still not clearly defined. Here, we developed a functional agonist monoclonal antibody (DQM3) against DR6, which bound to the first cysteine-rich domain. Importantly, DR6 signaling could be clearly activated by DQM3, which was dependent on its intracellular death domain. In addition, we demonstrated that the association between DR6 and TRADD was enhanced upon DQM3 stimulation and TRADD was involved in DR6-induced signaling activation. Taken together, our findings provide new insight into a novel mechanism by which DR6 induces downstream signaling in response to an agonist antibody.     

Atypical surface behavior of ceramides with nonhydroxy and 2-hydroxy very long-chain (C28–C32) PUFAs

Unique species of ceramide (Cer) with very-long-chain polyunsaturated fatty acid (VLCPUFA), mainly 28–32 carbon atoms, 4–5 double bonds, in nonhydroxy and 2-hydroxy forms (n-V Cer and h-V Cer, respectively), are generated in rat spermatozoa from the corresponding sphingomyelins during the acrosomal reaction. The aim of this study was to determine the properties of these sperm-distinctive ceramides in Langmuir monolayers. Individual Cer species were isolated by HPLC and subjected to analysis of surface pressure, surface potential, and Brewster angle microscopy (BAM) as a function of molecular packing. In comparison with known species of Cer, n-V Cer and h-V Cer species showed much larger mean molecular areas and increased molecular dipole moments in liquid expanded phases, which suggest bending and partial hydration of the double bonded portion of the VLCPUFA. The presence of the 2-hydoxyl group induced a closer molecular packing in h-V Cer than in their chain-matched n-V Cer. In addition, all these Cer species showed liquid-expanded to liquid-condensed transitions at room temperature. Existence of domain segregation was confirmed by BAM. Additionally, thermodynamic analysis suggests a phase transition close to the physiological temperature for VLCPUFA-Cers if organized as bulk dispersions.     

Cholesterol favors the anchorage of human dystrophin repeats 16 to 21 in membrane at physiological surface pressure

Dystrophin (DYS) is a filamentous protein that connects the cytoskeleton and the extracellular matrix via the sarcolemma, conferring resistance to muscular cells. In this study, interactions between the DYS R16–21 fragment and lipids were examined using Langmuir films made of anionic and zwitterionic lipids. The film fluidity was modified by the addition of 15% cholesterol. Whatever the lipid mixture examined, at low surface pressure (20 mN/m) few differences appeared on the protein insertion and the presence of cholesterol did not affect the protein/lipid interactions. At high surface pressure (30 mN/m), the protein insertion was very low and occurred only in zwitterionic films in the liquid-expanded phase. In anionic films, electrostatic interactions prevented the protein insertion outright, and caused accumulation of the protein on the hydrophilic part of the monolayer. Addition of cholesterol to both lipid mixtures drastically modified the protein–lipid interactions: the DYS R16–21 insertion increased and its organization in the monolayer appeared to be more homogeneous. The presence of accessible cholesterol recognition amino-acid consensus sequences in this fragment may enhance the protein/membrane binding at physiological lateral pressure. These results suggest that the anchorage of dystrophin to the membrane in vivo may be stabilized by cholesterol-rich nano-domains in the inner leaflet of sarcolemma.