Kinetic models for the dynamical behavior of polyacrylamide (PAAm)–κ-carrageenan (κC) composite gels

A fluorescence method was employed for studying the drying and swelling of PAAm–κC composite gels, which were formed from acrylamide (AAm) and N, N’- methylenebisacrylamide (BIS) with various κ–carrageenan (κC) contents by free radical crosslinking copolymerization in water. Composite gels were prepared at 80 °C with pyranine (Py) as a fluorescence probe. Scattered light, I_sc, and fluorescence emission intensities, I_em, were monitored during drying and swelling of these gels. The fluorescence intensity of pyranine increased and decreased as drying and swelling time are increased, respectively, for all gel samples. The Stern–Volmer equation combined with moving boundary and Li-Tanaka models were used to explain the behavior of I_em during drying and swelling processes respectively. It is found that the desorption coefficient D_d decreased as κC contents were increased for a given temperature during drying. However, the cooperative diffusion coefficient, D_s presented exactly the opposite case. Conventional gravimetrical and volumetric experiments were also carried out during drying and swelling of PAAm–κC composite gels. It was observed that D_d and D_s values measured with the fluorescence method were found to be much larger than they were measured with the conventional methods.     

Benzene, toluene, and o-xylene degradation by free and immobilized P. putida F1 of postconsumer agave-fiber/polymer foamed composites

Benzene, toluene, and o-xylene (BTX) degradation by immobilized Pseudomonas putida F1 of postconsumer agave-fiber/polymer foamed-composites (AFPFC) and suspended cultures was studied under controlled conditions. Analyses using FTIR-ATR and SEM showed that P. putida F1 adhered onto the composite surface and developed a biofilm. In this sense, the AFPFC were successfully used as a support for bacterial immobilization. Both systems, immobilized and suspended cells of P. putida F1, were able to completely degrade benzene and toluene from initial concentrations of 15, 30, 60, and 90 mg l⁻¹. An inhibitory effect of the intermediary catechol from benzene degradation was observed in suspended cultures but it was not presented in the immobilized system. The degradation of o-xylene was partially accomplished in both systems. The Monod equation was used to model the experimental data obtained from the biodegradation kinetics, and they were adequately described with this model.     

复合探针荧光定量PCR法检测布鲁氏菌的实验研究

目的:建立用复合探针荧光定量PCR快速检测布鲁氏菌的方法。方法:研究根据BSCP31基因编码31KDa的布鲁氏杆菌表面蛋白的核苷酸序列设计特异引物,通过PCR法的特异性、灵敏度和重复性研究,建立了复合探针荧光定量PCR检测布鲁氏菌的方法,用于布鲁氏菌病的筛选和诊断。结果:结果表明该检测方法的特异性为100%,最低可检出10个拷贝的质粒DNA分子,可对1×101-1×106拷贝范围内的模板进行定量,最低可检测至1×102CFU/ml细菌。该方法的精密度好,阳性质控品和阴性质控品不同时间测定三次及同一时间五次重复实验结果CV值均小于5%。结论:本研究建立的复合探针实时荧光定量PCR检测布鲁氏杆菌的方法,可对布鲁氏病原菌进行快速检测,对布病的筛选和确诊具有重要意义。     

Lactobacillus acidophilus expressing recombinant K99 adhesive fimbriae has an inhibitory effect on adhesion of enterotoxigenic Escherichia coli

The most common enteric colibacillosis in neonatal and newborns is caused by enterotoxigenic Escherichia coli(ETEC). Colonization of ETEC in the small intestine is associated with adhesions using fimbriae, which is known as a specific adhesion factor and provides highly specific means for anchoring and prerequisite for an infectious agent. In the present study we have engineered Lactobacillus acidophilus to produce recombinant K99 fimbriae, which is used for the colonization to the intestine of pigs. The expression of K99 fimbrial protein was confirmed using SDS-PAGE, immunoblot and agglutination analyses. To evaluate a function of the K99 fimbrial protein, inhibition and competition tests were performed on pre-screened intestinal brush border from pigs. The tests showed that recombinant L. acidophilus, not control L. acidophilus, had a significant inhibitory effect to and competition against K99+ E. coli in a dose dependent manner. In conclusion, we demonstrated that recombinant K99 fimbriae producing L. acidophilus was able to prevent E. coli binding to intestinal brush border.     

Carbon nanotube aqueous sol-gel composites: enzyme-friendly platforms for the development of stable biosensors

A new type of composite material based on carbon nanotubes and an aqueous sol-gel process has been developed. The electrochemical characteristics of these composites were investigated and compared to composites made with an alkoxy silane sol-gel process. The use of carbon nanotubes, as the conductive part of the composite, facilitated fast electron transfer rates. The feasibility of this type of composite for the development of biosensors was demonstrated using l-amino acid oxidase. The stability of the enzyme was increased when it was encapsulated in the aqueous sol-gel, and the sensor retained more that 50% of its response after 1 month of testing.     

基于遗传算法和支持向量机的乳杆菌发酵过程建模

由于生化反应过程的复杂性和高度非线性,多数简单的数学模型不能准确描述。该文基于Matlab软件,利用改进的支持向量机(υ-SVR)对植物乳酸杆菌发酵这一典型生化过程进行研究,应用遗传算法估计模型最优参数,建立植物乳杆菌的菌体密度预测模型。同时建立传统的logistic动力学模型以进行比较。结果表明,采用结合遗传算法的υ-SVR预测模型拟合误差小,皮尔森相关系数(R)更高,可以较好地预测乳酸杆菌的发酵过程,为其优化控制及放大提供依据。     

Alginate/carbon composite beads for laccase and glucose oxidase encapsulation: application in biofuel cell technology

Alginate–carbon beads were prepared in order to develop a biocompatible matrix for laccase and glucose oxidase immobilization for application in biofuel cell technology. The enzyme loading capacity was high (91%) in pure alginate beads for glucose oxidase. For laccase, the loading capacity was enhanced from 75% to 83% by introducing carbon. Desorption out of the matrix was controlled by the enzymes’ diffusion and reached a plateau after 40 h for laccase and 70 h for glucose oxidase. Two-thirds of both enzymes was irreversibly retained inside the alginate beads. This proportion increased to 80% for laccase in combined alginate/carbon beads. Half-life of the adsorbed enzyme was enhanced to 74 days for laccase in carbon/alginate beads and 45 days for glucose oxidase in pure alginate as compared to 38 days and 23 days for free enzymes, respectively.     

Mapping QTLs and candidate genes for iron and zinc concentrations in unpolished rice of Madhukar×Swarna RILs

Identifying QTLs/genes for iron and zinc in rice grains can help in biofortification programs. 168 F(7) RILs derived from Madhukar×Swarna were used to map QTLs for iron and zinc concentrations in unpolished rice grains. Iron ranged from 0.2 to 224ppm and zinc ranged from 0.4 to 104ppm. Genome wide mapping using 101 SSRs and 9 gene specific markers showed 5 QTLs on chromosomes 1, 3, 5, 7 and 12 significantly linked to iron, zinc or both. In all, 14 QTLs were identified for these two traits. QTLs for iron were co-located with QTLs for zinc on chromosomes 7 and 12. In all, ten candidate genes known for iron and zinc homeostasis underlie 12 of the 14 QTLs. Another 6 candidate genes were close to QTLs on chromosomes 3, 5 and 7. Thus the high priority candidate genes for high Fe and Zn in seeds are OsYSL1 and OsMTP1 for iron, OsARD2, OsIRT1, OsNAS1, OsNAS2 for zinc and OsNAS3, OsNRAMP1, Heavy metal ion transport and APRT for both iron and zinc together based on our genetic mapping studies as these genes strictly underlie QTLs. Several elite lines with high Fe, high Zn and both were identified.     

Preparation and characterization of nano-hydroxyapatite/chitosan cross-linking composite membrane intended for tissue engineering

In this paper, a series of nano-hydroxyapatite(n-HA)/chitosan cross-linking composite membranes (n-HA; 0, 5, 10, 15, 20 and 30 wt%) were successfully developed by a simple casting/solvent evaporation method. n-HA with size about 20 nm in vertical diameter and about 100 nm in horizontal diameter was successfully synthesized by a hydro-thermal precipitation method, and then dispersed into chitosan/genipin solution with the aid of continuous ultrasound to develop n-HA/chitosan cross-linking composite membranes. The detailed characterizations including Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), water adsorption and tensile test were performed. With the analysis of FTIR spectra and TGA spectra, it suggested that there was existence of possible interactions between polymer and n-HA. Meanwhile, the n-HA content was greatly effected on the morphology as well as the tensile property of composite membrane. In vitro cytotoxicity test suggested that the developed n-HA/chitosan cross-linking composite membrane was non-cytotoxicity against L929 cells after 24 h's incubation might be suitable for further in vivo application.     

植物乳杆菌P8产共轭亚油酸条件的优化

以植物乳杆菌P8菌株为研究对象,系统研究了发酵条件对共轭亚油酸生成的影响。分别研究了培养条件和培养基成分对共轭亚油酸产量的影响。通过单因素和正交试验表明:植物乳杆菌P8产共轭亚油酸的最佳条件为:培养时间为22 h、亚油酸(LA)添加量为0.9 mg/mL、接种量为1.5%、氮源采用2 g/L的胰蛋白胨,碳源采用3 g/L的葡萄糖。