Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior–inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.     

Exploration of Natural and Artificial Sequence Spaces: Towards a Functional Remodeling of Membrane-bound Cytochrome P450

Abstract

Two complementary methods are described that associate in vitro and in vivo steps to generate sequence diversity by segment directed saturated mutagenesis and family shuffling. A high-throughput DNA chip-based procedure for the characterization and potentially the equalization of combinatorial libraries is also presented. Using these approaches, two combinatorial libraries of cytochrome P450 variants derived from the CYP1A subfamily were constructed and their sequence diversity characterized. The results of functional screening using high-throughput tools for the characterization of membrane P450-catalyzed activities, suggest that the 204–214 sequence segment of human CYP1A1 is not critical for polycyclic aromatic hydrocarbon recognition, as was hypothesized from previous data. Moreover, mutations in this segment do not alter the discrimination between alkoxyresorufins, which, for all tested mutants, remained similar to that of wild-type CYP1A1. In contrast, the constructed CYP1A1–CYP1A2 mosaic structures, containing multiple crossovers, exhibit a wide range of substrate preference and regioselectivity. These mosaic structures also discriminate between closely related alkoxyresorufin substrates. These results open the way to global high-throughput analysis of structure–function relationships using combinatorial libraries of enzymes together with libraries of structurally related substrates.     

RIF1 Is Essential for 53BP1-Dependent Nonhomologous End Joining and Suppression of DNA Double-Strand Break Resection

1. Download : Download high-res image (298KB)
2. Download : Download full-size image

Highlights? RIF1 is essential for 53BP1-dependent CSR and fusion of dysfunctional telomeres ? BRCA1 antagonizes RIF1 in S phase to prevent error-prone repair by toxic NHEJ ? N-terminal phospho-SQ/TQ domain of 53BP1 interacts with and recruits RIF1 to DSBs ? RIF1 and 53BP1 promote NHEJ in G1 by blocking 5′ end resection of DSBs     

Telomere protection and TRF2 expression are enhanced by the canonical Wnt signalling pathway

The DNA‐binding protein TRF2 is essential for telomere protection and chromosome stability in mammals. We show here that TRF2 expression is activated by the Wnt/β‐catenin signalling pathway in human cancer and normal cells as well as in mouse intestinal tissues. Furthermore, β‐catenin binds to TRF2 gene regulatory regions that are functional in a luciferase transactivating assay. Reduced β‐catenin expression in cancer cells triggers a marked increase in telomere dysfunction, which can be reversed by TRF2 overexpression. We conclude that the Wnt/β‐catenin signalling pathway maintains a level of TRF2 critical for telomere protection. This is expected to have an important role during development, adult stem cell function and oncogenesis.     

Ambiguous Base Pairing of 1-(2-Deoxy-β-D-Ribofuranosyl)imidazole-4-carboxamide During PCR

Abstract

The use of 5′-triphosphate of 1-(2-deoxy-β-D-ribofuranosyl)imidazole-4-carboxamide (dYTP) in DNA amplification reaction in place of dATP or dGTP yielded mutations frequencies of 3–4×10^?2 per base per amplification. A reasonable proportion of transversions (11–15%) was observed in the absence of deletions and insertions.     

Radical Mediated Synthesis of 3′-α-C-Allenyl-2′,3′-dideoxythymidine as a Non-polar Analogue of AZT

Abstract

The synthesis of the novel modified nucleoside (1) exhibiting the 1,2-propadienyl [allenyl] group at the 3′-α- position is described. The 3′-C-C bond was formed by radical reaction between triphenylprop-2-ynylstannane (2) and the 3′-bromo(iodo)-2′,3′-dideoxynucleoside derivative (3).     

Development and Validation of a Discriminative Dissolution Test for Betamethasone Sodium Phosphate and Betamethasone Dipropionate Intramuscular Injectable Suspension

The intramuscular administration of the injectable suspension betamethasone sodium phosphate (BSP) and betamethasone dipropionate (BD) has immediate therapeutic activity due to solubilized BSP and prolonged activity resulting from the slow release of BD micro-crystals. The purpose of this study was to develop and validate a dissolution method for BD in intramuscular injectable suspensions with detection by high-performance liquid chromatography (HPLC) method. Five commercial products presented a distribution of particle sizes, ranging between 7.43 and 40.25 μm as measured by laser diffraction. It was also found that particle sizes differed between batches of the same product. The different products were tested using the paddle apparatus, with stirring speeds of 25 and 50 rpm in 300 mL of phosphate buffer; simulated body fluid, muscle fluid, and synovial fluid were used as biorelevant dissolution media at 37 ± 0.5°C. It was verified that not only does average particle size affect the dissolution rate, but also the mode and the polydispersity index of the particles. Discriminatory power was obtained using the in vitro dissolution method with 0.1 M sodium phosphate buffer pH 7.4 containing 0.1% sodium lauryl sulfate and a stirring speed of 50 rpm. The HPLC-method is linear, precise, selective, and accurate for the quantification of BSP and BD in dissolution profile testing. This dissolution method can be utilized as a method to control the quality of these injectable suspensions.Key words: dipropionate betamethasone, dissolution test, intramuscular injectable suspensions, simulated muscular fluid, sodium phosphate betamethasone     

Assessment on Pollution by Heavy Metals and Arsenic Based on Surficial and Core Sediments in the Cam River Mouth,Haiphong Province,Vietnam

The Cam River mouth (Haiphong Province) is one of the main river mouths of the Red River System, which is one of the most important water resources in Northern Vietnam. Over the past 50 years, the strong socio-economic development in the area has caused a considerable contamination with heavy metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) and arsenic. In this study, the vertical and horizontal distributions of heavy metals and arsenic in sediments from the Cam River mouth were investigated. In addition, the history, origin, and degree of contamination were assessed. Normalized (with respect to Al) heavy metal and arsenic concentrations in sediment cores and absolute dates obtained from the ¹³⁷Cs analysis were used to reconstruct the pollution history of the river mouth. As, Cu, Mn, Pb, and Zn concentrations increase rapidly by approximately two times or more from 1954 to 1975, and then remain nearly unchanged from 1975 until 2008, whereas Co, Cr, and Ni concentrations slightly increase from 1954 until 2008. In addition, background values for heavy metals and arsenic have also been determined with regard to the period before 1954. In the study area, Co, Cr, Cu, Ni, Mn, and Zn are evaluated as minorly enriched, whereas As and Pb are classified as moderately enriched. Generally, the anthropogenic activities in the Haiphong harbor and industrial zone locally contribute to the contamination by heavy metals and arsenic in the Cam River mouth.     

Operation of an aerobic granular pilot scale SBR plant to treat swine slurry

A pilot-scale Sequencing Batch Reactor was operated during 307 days in order to treat swine slurry characterized by its high variable composition: organic and nitrogen applied loading rates and C/N ratio were 1.4–6.3 kg COD_s/(m³ d), 0.5–2.5 kg N/(m³ d) and 1.9–9.4 g COD_s/(g N), respectively. Aerobic granules successfully developed in the reactor and their physical properties remained rather stable despite the feeding composition variability. Organic and ammonia removal efficiency reached 61–73% and 56–77%, respectively, however ammonia was mainly oxidized to nitrite. The reactor had a good biomass retention capacity to select for granular biomass. However, its efficiency to retain the solids present in the feeding was low. Aerobic granulation in SBR systems appears as an interesting alternative to treat slurry in small livestock facilities where the implementation of anaerobic digestion systems is not a feasible option or the removal of nitrogenous compounds is required.     

Association mapping and meta-analysis: two complementary approaches for the detection of reliable Septoria tritici blotch quantitative resistance in bread wheat (Triticum aestivum L.)

Septoria tritici blotch (STB), caused by the ascomycete Mycosphaerella graminicola, is one of the most ubiquitous and important diseases of bread wheat worldwide. The aim of this study was to identify markers linked to loci conferring resistance to STB from seven biparental populations. Linkage analysis, meta-analysis and association mapping were combined to identify robust quantitative trait loci (QTLs) for resistance. Linkage analysis led to the detection of 115 QTLs for resistance to STB and 66 QTLs linked to plant height and/or earliness. Meta-analysis clustered these 115 QTLs into 27 Meta-QTLs (MQTLs) of pathogen resistance, of which 14 were found to be linked to plant height and/or earliness. Both the relationship between dwarfing and susceptibility to STB and the significant negative correlation between earliness and STB symptoms were confirmed. Eleven loci were linked to STB resistance by association mapping using a general linear model and/or a mixed linear model, of which eight co-located with STB MQTLs and two co-located with individual QTLs. Associated markers located in MQTL regions enhanced the relevance of the results and validated the potential of an association mapping approach. With several biparental populations, meta-analysis is the most relevant form of genetic analysis study, but association mapping can be used as a validation method. Regions linked to resistance in both methods should be relevant for use in breeding programs for improving resistance to STB in wheat varieties. The main interest in comparing both approaches is to detect robust loci that will be functional in many genetic backgrounds rather than just in one or a few specific backgrounds.