利用酵母双杂交系统筛选与黄瓜花叶病毒外壳蛋白互作的寄主蛋白

利用酵母双杂交系统,以黄瓜花叶病毒(Cucumber mosaic virus,CMV)的外壳蛋白(coat protein,CP)为诱饵,从番茄叶片c DNA文库中筛选与其互作的蛋白。结果显示,诱饵载体pBT3-SUC-CMV-CP均能在酵母细胞中正确表达,无自激活活性而且对酵母无毒性;通过对酵母双杂交文库的筛选和回转验证,共获得了98个阳性克隆,分别编码67个可能与CMV-CP相互作用的蛋白,分别参与植物防御反应、光合作用、物质转运、信号转导、能量代谢、氨基酸代谢、细胞壁的形态建成、植物的激素代谢等。本研究结果表明,CMV CP可同时调控寄主的多个代谢过程,在CMV的致病过程中有多重功能。     

TSG101 promotes the proliferation,migration and invasion of hepatocellular carcinoma cells by regulating the PEG10

The tumour susceptibility gene 101 (TSG101) is reported to play important roles in the development and progression of several human cancers. However, its potential roles and underlined mechanisms in human hepatocellular carcinoma (HCC) are still needed to be further clarified. In the present study, we reported that knock down of TSG101 suppressed the proliferation, migration and invasion of HCC cells, while overexpression of TSG101 facilitated them. Molecularly, the results revealed that knock down of TSG101 significantly decreased the cell cycle related regulatory factor p53 and p21. In another point, knock down of TSG101 also obviously decreased the level of metallopeptidase inhibitor TIMP1 (Tissue inhibitors of metalloproteinases 1), which results in inhibition of MMP2, MMP7 and MMP9. In contrast, overexpression of TSG101 had opposite effects. The iTRAQ proteomics analysis identified that oncogenic protein PEG10 (Paternally expressed gene 10) might be a potential downstream target of TSG101. Further investigation showed that TSG101 interacted with PEG10 and protected it from proteasomal degradation thereby regulating the expression of p53, p21 and MMPs. Finally, we found that both TSG101 and PEG10 proteins are up‐regulated and presented a direct correlation in HCC patients. In conclusion, these results suggest that TSG101 is up‐regulated in human HCC patients, which may accelerate the proliferation, migration and invasion of HCC cells through regulating PEG10.     

A Desolvated Solid–Solid Interface for a High‐Capacitance Electric Double Layer

Understanding the electric double layer is essential for achieving efficient electrochemical energy storage technologies. A conventional solid–liquid electrode interface suffers from serious self‐discharge and a narrow voltage window, which makes the development of a solid–solid interface imperative. However, an in‐depth understanding of the electric double layer with a solid–solid interface is lacking. Here, a solid–solid interfacial electric double layer is proposed with excellent electrochemical performance. The solid layer is constructed by the electrochemical decomposition of lithium difluoro(oxalate)borate, which provides a desolvated environment for the establishment of a electric double layer. This makes a stronger interaction between the electrode surface and the ions. Based on this unique property, it is found that the solid–solid interfacial electric double layer has an increased capacitance, which suggests a way to develop high‐energy electrochemical capacitors.     

Capillary Encapsulation of Metallic Potassium in Aligned Carbon Nanotubes for Use as Stable Potassium Metal Anodes

Metallic potassium (K) is a desirable anode for potassium secondary batteries due to its low electrode potential in nonaqueous electrolytes and high theoretical capacity. Nevertheless, instability caused by dendritic growth, large volume changes, and parasitic side reactions hamper its practical application. Here, an anode containing metallic K is fabricated by infiltrating an aligned carbon nanotube membrane (ACM) with molten K because of its good wettability to molten K due to the strong capillary forces. The K metal is spatially distributed on the 3D ACM framework, which offers sufficient electrode/electrolyte contact for charge transfer. The robust ACM host provides a large number of K nucleation sites and physically confines the K deposited there, thus mitigating dimensional changes during cycling. The pathways for electrons and ions in the anode are associated to form a mixed conducting network, which is beneficial for the electrochemical redox. Consequently, the anode shows stable plating/stripping profiles with low polarization in symmetric cells using conventional carbonate‐based electrolytes. In addition, dendrite growth is suppressed, and the anode demonstrates excellent suitability when paired with a Prussian blue cathode in a full cell. This design strategy is expected to provide a way to address the problems with using metallic K anodes.     

Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries

Rechargeable lithium–sulfur batteries have attracted tremendous scientific attention owing to their superior energy density. However, the sulfur electrochemistry involves multielectron redox reactions and complicated phase transformations, while the final morphology of solid‐phase Li₂S precipitates largely dominate the battery's performance. Herein, a triple‐phase interface among electrolyte/CoSe₂/G is proposed to afford strong chemisorption, high electrical conductivity, and superb electrocatalysis of polysulfide redox reactions in a working lithium–sulfur battery. The triple‐phase interface effectively enhances the kinetic behaviors of soluble lithium polysulfides and regulates the uniform nucleation and controllable growth of solid Li₂S precipitates at large current density. Therefore, the cell with the CoSe₂/G functional separator delivers an ultrahigh rate cycle at 6.0 C with an initial capacity of 916 mAh g^?1 and a capacity retention of 459 mAh g^?1 after 500 cycles, and a stable operation of high sulfur loading electrode (2.69–4.35 mg cm^?2). This work opens up a new insight into the energy chemistry at interfaces to rationally regulate the electrochemical redox reactions, and also inspires the exploration of related energy storage and conversion systems based on multielectron redox reactions.     

Quantifying the Volumetric Performance Metrics of Supercapacitors

Nanostructured materials have greatly improved the performance of electrochemical energy storage devices because of the increased activity and surface area. However, nanomaterials (e.g., nanocarbons) normally possess low packing density, and thus occupy more space which restricts their suitability for making electrochemical devices as compact as possible. This has resulted in their low volumetric performance (capacitance, energy density, and power density), which is a practical obstacle for the application of nanomaterials in mobile and on‐board energy storage devices. While rating electrode materials for supercapacitors, their volumetric performance is equally important as the gravimetric metrics and more reliable in particular for systems with limited space. However, the adopted criteria for measuring the volumetric performance of supercapacitors vary in the literature. Identifying the appropriate performance criteria for the volumetric values will set a universal ground for valid comparison. Here, the authors discuss the rationale for quantifying the volumetric performance metrics of supercapacitors from the three progressive levels of materials, electrodes, and devices. It is hoped that these thoughts will be of value for the general community in energy storage research.     

Inverse Optical Cavity Design for Ultrabroadband Light Absorption Beyond the Conventional Limit in Low‐Bandgap Nonfullerene Acceptor–Based Solar Cells

In the subwavelength regime, several nanophotonic configurations have been proposed to overcome the conventional light trapping or light absorption enhancement limit in solar cells also known as the Yablonovitch limit. It has been recently suggested that establishing such limit should rely on computational inverse electromagnetic design instead of the traditional approach combining intuition and a priori known physical effect. In the present work, by applying an inverse full wave vector electromagnetic computational approach, a 1D nanostructured optical cavity with a new resonance configuration is designed that provides an ultrabroadband (≈450 nm) light absorption enhancement when applied to a 107 nm thick active layer organic solar cell based on a low‐bandgap (1.32 eV) nonfullerene acceptor. It is demonstrated computationally and experimentally that the absorption enhancement provided by such a cavity surpasses the conventional limit resulting from an ergodic optical geometry by a 7% average over a 450 nm band and by more than 20% in the NIR. In such a cavity configuration the solar cells exhibit a maximum power conversion efficiency above 14%, corresponding to the highest ever measured for devices based on the specific nonfullerene acceptor used.     

Immobilization of laccase onto modified PU/RC nanofiber via atom transfer radical polymerization method and application in removal of bisphenol A

In this study, 2‐hydroxyethyl methacrylate (HEMA) was used as the monomers for surface grafting on electrospun PU/RC nanofiber membrane via atom transfer radical polymerization (ATRP) method, and the PU/RC‐poly(HEMA) nanofiber membrane was investigated as a carrier for LAC. Free and immobilized LAC was characterized, and efficiency of bisphenol A (BPA) removal was determined. The results indicated that the PU/RC‐poly(HEMA)‐LAC showed relatively higher pH stability, temperature stability, and storage stability than free and PU/RC‐LAC; moreover, more than 60% of the PU/RC‐poly(HEMA)‐LAC activity was retained after 10 cycles of ABTS treatment. Notably, the BPA removal efficiency of PU/RC‐poly(HEMA)‐LAC membrane generally ranged from 87.3 to 75.4% for the five cycles. Therefore, the PU/RC‐poly(HEMA) nanofiber membrane has great potential as a carrier for the LAC immobilization for various industrial applications and bioremediation.