Impact of Heavy Metals on the Selective Phenotypical Markers of Pseudomonas aeruginosa

The aim of this study was to characterize the impact of heavy metals on phenotypical markers of Pseudomonas aeruginosa. Twenty-two isolates of P. aeruginosa, either clinical (20) or secondary treated wasterwater (2), were used to inoculate micro-ecosystems of sterile distilled water or secondary waste effluent in the presence of subminimal inhibitory concentrations of a variety of heavy metals commonly encountered in the aquatic naturally habitat (Ca²⁺, Co²⁺, Cr³⁺, Cu²⁺, Hg²⁺, Ni²⁺, Zn²⁺). Micro-ecosystems were exposed to visible light at laboratory temperature and individual strains were reisolated after a 1-, 3-, or 6-month period. The re-isolates (129) were characterized using hierarchical classification analysis in order to define affinities among variants of P. aeruginosa. Subsequently, discriminant analysis was used to detect eventual relationships among the different phenotypical markers studied. Results of the hierarchical classification, based on qualitative or quantitative approaches, showed clearly that incubation of P. aeruginosa in the presence of heavy metals altered the studied phenotypical markers, namely serotype, phage type, MIC of metals, and pyocin type. Discriminant analysis showed that the studied phenotypical markers could be classified into four clusters: C1 (L1 and L2 phage types, Hg tolerance and/or resistance, S2 serotype), C2 (P2 pyocin type, Cd tolerance and/or resistance, S1 serotype), C3 (Co and Cr tolerance and/or resistance) and C4 (P1 pyocin type, Ni, Zn, and Cu tolerance and/or resistance).     

Utility of genetic screening in hypertrophic cardiomyopathy: prevalence and significance of novel and double (homozygous and heterozygous) beta-myosin mutations

Genetic screening of the beta-myosin heavy chain gene (MYH7) was evaluated in 100 consecutive unrelated patients with hypertrophic cardiomyopathy (HCM) and 200 normal unrelated subjects. Seventeen beta-myosin mutations were identified in 19 patients. Notably, 13, or 76%, were novel. Mutations were detected in both alleles in two patients: homozygous for Lys207Gln in one, and heterozygous for Pro211 Leu and Arg663His in another. No mutation was detected in the controls. MYH7-associated HCM was associated with more marked left atrial enlargement and syncope than non-MYH7-related HCM. Our findings indicate that: (1) screening methods should allow identification of novel mutations; and (2) more than one sarcomeric mutation may be present in a patient more commonly than is appreciated. Further studies are necessary to ascertain the clinical consequences of the novel and compound gene abnormalities, and to determine whether correlating functional domain to phenotype provides more useful information about the clinical significance of the molecular defects.     

A new method for the extraction of fetal ECG from the dependent abdominal signals using blind source separation and adaptive noise cancellation techniques

Background

The electrocardiogram (ECG) is a diagnostic tool that records the electrical activity of the heart, and depicts it as a series of graph-like tracings, or waves. Being able to interpret these details allows diagnosis of a wide range of heart problems. Fetal electrocardiogram (FECG) extraction has an important impact in medical diagnostics during the mother pregnancy period. Since the observed FECG signals are often mixed with the maternal ECG (MECG) and the noise induced by the movement of electrodes or by mother motion, the separation process of the ECG signal sources from the observed data becomes quite complicated. One of its complexity is when the ECG sources are dependent, thus, in this paper we introduce a new approach of blind source separation (BSS) in the noisy context for both independent and dependent ECG signal source. This approach consist in denoising the observed ECG signals using a bilateral total variation (BTV) filter; then minimizing the Kullbak-Leibler divergence between copula densities to separate the FECG signal from the MECG one.

Results

We present simulation results illustrating the performance of our proposed method. We will consider many examples of independent/dependent source component signals. The results will be compared with those of the classical method called independent component analysis (ICA) under the same conditions. The accuracy of source estimation is evaluated through a criterion, called again the signal-to-noise-ratio (SNR). The first experiment shows that our proposed method gives accurate estimation of sources in the standard case of independent components, with performance around 27 dB in term of SNR. In the second experiment, we show the capability of the proposed algorithm to successfully separate two noisy mixtures of dependent source components - with classical criterion devoted to the independent case - fails, and that our method is able to deal with the dependent case with good performance.

Conclusions

In this work, we focus specifically on the separation of the ECG signal sources taken from skin two electrodes located on a pregnant woman’s body. The ECG separation is interpreted as a noisy linear BSS problem with instantaneous mixtures. Firstly, a denoising step is required to reduce the noise due to motion artifacts using a BTV filter as a very effective one-pass filter for denoising. Then, we use the Kullbak-Leibler divergence between copula densities to separate the fetal heart rate from the mother one, for both independent and dependent cases.

     

Thigmomorphogenesis in Solanum lycopersicum: Morphological and biochemical responses in stem after mechanical stimulation

The activation of the phenylpropanoid pathway in plants by environmental stimuli is one of the most universal biochemical stress responses known. In tomato plant, rubbing applied to a young internode inhibit elongation of the rubbed internode and his neighboring one. These morphological changes were correlated with an increase in lignification enzyme activities, phenylalanine ammonia-lyase (PAL), cinnamyl alcohol dehydrogenase (CAD) and peroxidases (POD), 24 hours after rubbing of the forth internode. Furthermore, a decrease in indole-3-acetic acid (IAA) content was detected in the rubbed internode and the upper one. Taken together, our results suggest that decrease in rubbed internode length is a consequence of IAA oxidation, increases in enzyme activities (PAL, CAD and POD), and cell wall rigidification associated with induction of lignification process.Key words: Mechanical stimulation, PAL, CAD, POD, IAAIn their environment, plants are constantly submitted to several stimuli such as wind, rain and wounding. The growth response of plants to such stimuli was termed thigmomorphogenesis and was observed in a wide range of plants.^1–3 The most common thigmomorphogenetic response is a retardation of tissue elongation accompanied by an increase in thickness.⁴ The plant response to mechanical perturbation is mainly restricted to the young developing internode, since no influence can be detected when the internode has reached its final length.^5,6 These plant growth modifications, which characterize thigmomorphogenesis, are related to biochemical events associated with lignification process⁷ and ethylene production.^8,9In tomato plant the length of internodes 4 (N4) and 5 (N5) was measured 14 days after rubbing of the fourth internode. Results reported in Figure 1 show that rubbing led to a significant reduction of elongation of the stressed internode (N4) (decrease of N4 length from 4.3 cm in the control plant to 2.9 in the rubbed one). This effect was not limited to the rubbed area but affected also the elongation of the neighboring internodes (N5) that were shorter in rubbed plants than in control ones.Open in a separate windowFigure 1Internode lengths of control and rubbed plants measured 14 day after mechanical stress applied to the fourth internode. Standard errors are indicated by vertical bars.Results reported in Figure 2 show an increase in PAL activity in both internodes N4 and N5, 24 hours after mechanical stress application as compared with corresponding controls. CAD activity was also investigated in N4 and N5, 24 h after rubbing of the fourth internode. Results presented in Figure 3 show that mechanical stress application induces a strong increase of CAD activity in the rubbed internode N4 (5.3 nkatal μg-1 protein) with an approximately two-fold increase when compared to control tomato internodes (2.3 nkatal μg-1 protein). Further, CAD activity in N5 was also increased in the rubbed internode (5.538 nkatal μg-1 protein) as compared with the control one (3.256 nkatal μg-1 protein).Open in a separate windowFigure 2PAL activity of internode 4, and 5 in control and rubbed plants 24 h after rubbing of the fourth internode. Standard errors are indicated by vertical bars.Open in a separate windowFigure 3CAD activity of internode 4, and 5 in control and rubbed plants 24 h after rubbing of the fourth internode. Standard errors are indicated by vertical bars.Syringaldazine (S-POD) and gaïacol (G-POD) peroxidase activities were measured in tomato N4 and N5. Results reported in Figure 4 show an increase in soluble peroxidase activity with both substrates in the rubbed internode N4 as compared with control plant. Enhancement in peroxidase activities in N4 was more pronounced with gaïacol (80.7 U) as an electron donor than syringaldazine (33.8 U). Similar results were observed in internode 5 as compared with control one (Fig. 4).Open in a separate windowFigure 4(A) Syringaldazine-POD (Syr-POD) activity of internode 4 and 5 in control and rubbed plants 24 h after rubbing of the fourth internode. Standard errors are indicated by vertical bars. (B) Gaiacol-POD (G-POD) activity of internode 4 and 5 in control and rubbed plants 24 h after rubbing of the fourth internode. Standard errors are indicated by vertical bars.IAA was quantified in control and rubbed plant internodes 24 h after rubbing of the fourth internode. Results reported in figure 5 show that in control sample and as expected, the content of IAA was found to be higher in the younger internode (N5) as compared to the older one (N4). Rubbing led to a significant decrease in IAA levels in N4 (5.06 nmol g⁻¹ MF⁻¹) as compared with corresponding controls (7.27 nmol g⁻¹ MF⁻¹). Similar results were observed in internode 5, where IAA content was reduced from 16.52 nmol g⁻¹ MF⁻¹ in control internode to 12.35 nmol g⁻¹ MF⁻¹ in the rubbed internode (Fig. 5).Open in a separate windowFigure 5IAA Level of internode 4 and 5 in control and rubbed plants 24 h after rubbing of the fourth internode. Standard errors are indicated by vertical bars.The results reported here establish an evident correlation between growth limitation of the rubbed internode and their degree of lignification, the increase in lignification enzymes activities and auxin degradation after mechanical stress application.Auxin seems to be involved in thigmomorphogenesis.¹⁰ It was proposed that MIS (Mechanically-induced stress) has opposite effects on auxin levels in the two species studied to date, Phaseolus vulgaris¹⁰ and Bryonia dioica.^11,12 Auxin level as measured by bioassay, increased in Phaseolus vulgaris following rubbing of the stem.¹⁰ It was proposed that a build up of auxin may result from the reduced polar transport of IAA at the rubbed internode, causing a build up of IAA in the stem tissue. Exogenous IAA did not reverse the MIS inhibition of growth in Phaseolus vulgaris and high levels of IAA retarded growth in non-stressed plants.¹⁰ Thus, retardation of extension growth in Phaseolus vulgaris may have been caused by high levels of endogenous auxin and the increase in stem diameter by increased ethylene production.⁴ However, ethylene increases radial growth only if auxin is present.¹³Boyer¹¹ reported a decrease in auxinlike activity in Bryonia dioica following MIS and this was confirmed in the same species by Hofinger et al.¹² who reported a decrease in IAA using gas chromatography-mass spectrometry. Auxin catabolism was accompanied with changes in both soluble and ionically bound cell wall basic peroxidases¹⁴ and the appearance of an additional peroxidase. This can suggest that in Bryonia, auxin catabolism is hastened by mechanical stimulated peroxidase. In addition, Boyer et al.¹⁵ reported that lithium pre-treatment prevents both thigmomorphogenesis and appearance of specific cathodic isoperoxidase in Bryonia plants subjected to MIS. This is give further credence to the possibility that the peroxidase-auxin system is involved in Bryonia thigmomorphogenesis. In addition, ethylene increases peroxidase activity which reduces the auxin content in the tissue to a level low enough not to support normal growth. We have evidence that decrease of auxin level contribute to mechanism leading to tomato internode inhibition subjected to mechanical stress.Growth inhibition has been suggested to be the result of tissues lignification.⁶ As the initial enzyme in the monolignol biosynthesis pathway, PAL has a direct influence on lignin accumulation.¹⁶ The characteristics of lignin differ among cell wall tissues and plant organs.¹⁷ It comprises polyphenolic polymers derived from the oxidative polymerization of different monolignols, including p-coumaryl, coniferyl and sinapyl alcohols via a side pathway of phenylalanine metabolism leading to lignin synthesis.¹⁸ The increase in lignin content in the rubbed tomato internode could be a response mechanism to mechanical damage caused by rubbing.³ It is known that plants create a natural barrier that includes lignin and suberin synthesis, components directly linked to support systems.^19,20The increase in lignin content of rubbed tomato internode³ is paralleled by a rise in CAD activity and whilst such direct proportionality between CAD activity and lignin accumulation does not always agree with the results in the literature, it clearly is responding in ways similar to those of the other enzymes in the pathway.²¹Mechanical stress-induced membrane depolarization would generate different species of free radicals and peroxides, which in turn initiate lipid peroxidation.²² The degradation of cell membranes is suggested to bring about rapid changes in ionic flux, especially release of K⁺ which would result in an enhanced endogenous Ca/K ratio and in leakage of solutes, among them electron donors such as ascorbic acid and phenolic substances. The increased intracellular relative calcium level activated secretion of basic peroxidases²³ into the free space where, in association with the electron donors and may be with the circulating IAA, they eliminate the peroxides, and facilitated binding of basic peroxidases to membrane structures allowing a role as 1-aminocyclopropane-1-carboxylic acid (ACC)-oxidases. The resulting IAA and ACC oxidase-mediated changes in ethylene production²⁴ would further induce (this time through the protein synthesis machinery) an increase in activity of phenylalanine ammonia-lyase and peroxidases. The resulting lignification and cell wall rigidification determines the growth response of tomato internode to the mechanical stress.     

Characterization of genetic diversity in chickpea using SSR markers,Start Codon Targeted Polymorphism (SCoT) and Conserved DNA-Derived Polymorphism (CDDP)

Physiology and Molecular Biology of Plants - To evaluate the genetic diversity among 48 genotypes of chickpea comprising cultivars, landraces and internationally developed improved lines genetic...     

Inflammatory monocytes and neutrophils are licensed to kill during memory responses in vivo

Immunological memory is a hallmark of B and T lymphocytes that have undergone a previous encounter with a given antigen. It is assumed that memory cells mediate better protection of the host upon re-infection because of improved effector functions such as antibody production, cytotoxic activity and cytokine secretion. In contrast to cells of the adaptive immune system, innate immune cells are believed to exhibit a comparable functional effector response each time the same pathogen is encountered. Here, using mice infected by the intracellular bacterium Listeria monocytogenes, we show that during a recall bacterial infection, the chemokine CCL3 secreted by memory CD8+ T cells drives drastic modifications of the functional properties of several populations of phagocytes. We found that inflammatory ly6C+ monocytes and neutrophils largely mediated memory CD8+ T cell bacteriocidal activity by producing increased levels of reactive oxygen species (ROS), augmenting the pH of their phagosomes and inducing antimicrobial autophagy. These events allowed an extremely rapid control of bacterial growth in vivo and accounted for protective immunity. Therefore, our results provide evidence that cytotoxic memory CD8+ T cells can license distinct antimicrobial effector mechanisms of innate cells to efficiently clear pathogens.     

Extremely high Tp53 mutation load in esophageal squamous cell carcinoma in Golestan Province, Iran

Background

Golestan Province in northeastern Iran has one of the highest incidences of esophageal squamous cell carcinoma (ESCC) in the world with rates over 50 per 100,000 person-years in both sexes. We have analyzed TP53 mutation patterns in tumors from this high-risk geographic area in search of clues to the mutagenic processes involved in causing ESCC.

Methodology/Principal Findings

Biopsies of 119 confirmed ESCC tumor tissue from subjects enrolled in a case-control study conducted in Golestan Province were analyzed by direct sequencing of TP53 exons 2 through 11. Immunohistochemical staining for p53 was carried out using two monoclonal antibodies, DO7 and 1801. A total of 120 TP53 mutations were detected in 107/119 cases (89.9%), including 11 patients with double or triple mutations. The mutation pattern was heterogeneous with infrequent mutations at common TP53 “hotspots” but frequent transversions potentially attributable to environmental carcinogens forming bulky DNA adducts, including 40% at bases known as site of mutagenesis by polycyclic aromatic hydrocarbons (PAHs). Mutations showed different patterns according to the reported temperature of tea consumption, but no variation was observed in relation to ethnicity, tobacco or opium use, and alcoholic beverage consumption or urban versus rural residence.

Conclusion/Significance

ESCC tumors in people from Golestan Province show the highest rate of TP53 mutations ever reported in any cancer anywhere. The heterogeneous mutation pattern is highly suggestive of a causative role for multiple environmental carcinogens, including PAHs. The temperature and composition of tea may also influence mutagenesis.     

Controlled Expression of Recombinant Proteins in <Emphasis Type="Italic">Physcomitrella patens</Emphasis> by a Conditional Heat-shock Promoter: a Tool for Plant Research and Biotechnology

The ability to express tightly controlled amounts of endogenous and recombinant proteins in plant cells is an essential tool for research and biotechnology. Here, the inducibility of the soybean heat-shock Gmhsp17.3B promoter was addressed in the moss Physcomitrella patens, using β-glucuronidase (GUS) and an F-actin marker (GFP-talin) as reporter proteins. In stably transformed moss lines, Gmhsp17.3B-driven GUS expression was extremely low at 25 °C. In contrast, a short non-damaging heat-treatment at 38 °C rapidly induced reporter expression over three orders of magnitude, enabling GUS accumulation and the labelling of F-actin cytoskeleton in all cell types and tissues. Induction levels were tightly proportional to the temperature and duration of the heat treatment, allowing fine-tuning of protein expression. Repeated heating/cooling cycles led to the massive GUS accumulation, up to 2.3% of the total soluble proteins. The anti-inflammatory drug acetyl salicylic acid (ASA) and the membrane-fluidiser benzyl alcohol (BA) also induced GUS expression at 25 °C, allowing the production of recombinant proteins without heat-treatment. The Gmhsp17.3B promoter thus provides a reliable versatile conditional promoter for the controlled expression of recombinant proteins in the moss P. patens.     

Differential modulation of human lactoferrin activity against both R5 and X4-HIV-1 adsorption on epithelial cells and dendritic cells by natural antibodies

Human lactoferrin (Lf) is an iron binding glycoprotein that is present in several mucosal secretions. Many biological functions have been ascribed to Lf. In the present study, we showed that Lf limited specifically adsorption of R5- and X4-HIV-1-free particles on endometrial epithelial HEC-1A cells, by inhibiting virus adsorption on heparan-sulfated proteoglycans. But, Lf did not interfere with both R5 and X4-HIV transcytosis. We showed also the efficacy of Lf in preventing R5 and X4-HIV capture by dendritic cells. Conversely, we demonstrated that Lf-reacting natural Abs (NAbs) present within i.v. Ig-enhanced HIV attachment on dendritic cells by forming HIV-Lf-NAbs. HIV particles were able to directly interact with Lf following its interaction with NAbs. We also found Lf-reacting natural Abs within cervicovaginal secretions, suggesting the existence of Lf-NAbs complexes in women genital tract in vivo. In conclusion, this study highlights Lf as a potent microbicides and reports new function for NAbs within the genital compartment that may compartment that may abolish the inhibitory activity of microbicide compounds. Thus, we proposed a model in which Lf would appear as a double-edged sword that could have beneficial or detrimental effects depending on both cellular and molecular environments. This study highlights the use of Lf derivates as microbicide candidates to limit such interferences.     

Environmental Scanning Electron Microscopy characterization of the adhesion of conidia from <Emphasis Type="Italic">Penicillium expansum</Emphasis> to cedar wood substrata at different pH values

Initial microbial adhesion to surfaces is a complicated process that is affected by a number of factors. An important property of a solution that may influence adhesion is pH. The surface properties of the cedar wood were characterized by the sessile drop technique. Moreover, the interfacial free energy of surface adhesion to the cedar wood was determined under pH values (2, 3, 5, 7, 9 and 11). The results showed that cedar wood examined at different pH levels could be considered hydrophobic ranged from Giwi = ?13.1 mJ/m² to Giwi = ?75 mJ/m². We noted that the electron-donor character of cedar wood was important at both basic and limit acidic conditions (pH 11 and pH 3) and it decreased at intermediate pH (pH 5). The cedar wood substratum presents a weak electron acceptor under various pH’s. In addition, the adhesion of conidia from Penicilllium expansum to the cedar wood surfaces at different pH values (2, 3, 5, 7, 9 and 11) was investigated using Environmental Scanning Electron Microscopy and image analysis was assessed with the Mathlab^® program. The data analysis showed that the conidia from P. expansum were strongly influenced by the pH. The maximum adhesion occurs in the pH 11 and pH 3 and decreased to 24% at pH 5.