MDH1: an apple homeobox gene belonging to the BEL1 family

Differential display was used to isolate genes differentially expressed early in fruit development of apple (Malus domestica Borkh.). This approach resulted in the isolation of MDH1, a homeobox gene with a homeodomain similar to that of BELL1 (BEL1), which is involved in regulation of ovule development in Arabidopsis. However, outside the homeodomain MDH1 is quite different from BEL1. In apple, MDH1 mRNA was predominantly found in flowers, expanding leaves and expanding fruit. In pre-anthesis flowers, in situ hybridization showed that MDH1 mRNA accumulated in ovules. To further investigate the function of this new homeobox gene, MDH1 was transformed into Arabidopsis thaliana under the control of the cauliflower mosaic virus 35S promoter. The transgenic Arabidopsis plants showed dwarfing, reduced fertility and changes in carpel and fruit (silique) shape. The size and shape of the cells in the transgenic fruit was irregular. Both the transgenic phenotypes in Arabidopsis and the expression pattern of this gene in apple are consistent with the idea that MDH1 is likely to play an important role in control of plant fertility.     

Treatment of separation anxiety in dogs with clomipramine: results from a prospective, randomized, double-blind, placebo-controlled, parallel-group, multicenter clinical trial

The efficacy and tolerability of clomipramine in the treatment of separation anxiety in dogs was tested in a prospective, randomized, double-blind, placebo-controlled, parallel-group, international multicenter clinical trial. For a diagnosis of separation anxiety, dogs had to exhibit at least one of the following signs in the absence of their owner: destruction, defecation, urination and/or vocalization, as well as the behaviour suggestive of "hyper-attachment" to their owner. A total of 95 dogs were randomized to receive one of the three treatments for 2-3 months: "standard-dose" clomipramine (1 to <2 mg/kg, PO, q. 12 h); "low-dose" clomipramine (0.5 to <1 mg/kg, PO, q. 12 h); and placebo (PO, q. 12 h). All dogs received behavioural therapy. Dogs were examined at four time points (days 0, 28, 56 and 84) after the initiation of therapy. Improvement in each dog's behaviour at days 28, 56 and 84 was evaluated in comparison to its behaviour at day 0.The results showed that, compared to placebo, dogs receiving standard-dose clomipramine were rated improved at least three times faster for the signs destruction, defecation and urination. At most time points, more dogs in the standard-dose clomipramine group were rated improved for the signs destruction, defecation and urination, and in an owner's global assessment of the dog's overall behaviour (p<0.05 at certain time points). However, there were no statistically significant differences at any time point between the standard dose and the placebo groups in the sign vocalization. The low-dose clomipramine group produced no statistically significant effect when compared with placebo. Mild and transient vomiting was noted as a side effect of clomipramine in a small number of dogs.It is concluded that addition of standard-dose (1 to <2 mg/kg, PO, q. 12 h) clomipramine to conventional behavioural therapy for 2-3 months ameliorated the signs of separation anxiety in dogs.     

Lacticin 3147, a Broad-Spectrum Bacteriocin Which Selectively Dissipates the Membrane Potential

Lacticin 3147 is a broad-spectrum bacteriocin produced by Lactococcus lactis subsp. lactis DPC3147 (M. P. Ryan, M. C. Rea, C. Hill, and R. P. Ross, Appl. Environ. Microbiol. 62:612–619, 1996). Partial purification of the bacteriocin by hydrophobic interaction chromatography and reverse-phase fast protein liquid chromatography revealed that two components are required for full activity. Lacticin 3147 is bactericidal against L. lactis, Listeria monocytogenes, and Bacillus subtilis; at low concentrations of the bacteriocin, bactericidal activity is enhanced when target cells are energized. This finding suggests that the presence of a proton motive force promotes the interaction of the bacteriocin with the cytoplasmic membrane, leading to the formation of pores at these low lacticin 3147 concentrations. These pores were shown to be selective for K⁺ ions and inorganic phosphate. The loss of these ions resulted in immediate dissipation of the membrane potential and hydrolysis of internal ATP, leading to an eventual collapse of the pH gradient at the membrane and ultimately to cell death. Our results suggest that lacticin 3147 is a pore-forming bacteriocin which acts on a broad range of gram-positive bacteria.     

Analysis of the Influence of Environmental Parameters on Clostridium botulinum Time-to-Toxicity by Using Three Modeling Approaches

This study used the technique of waiting time modeling to analyze the combined effects of temperature, pH, carbohydrate, protein, and lipid on the time-to-toxicity of Clostridium botulinum 56A. Waiting time models can be used whenever the time to the occurrence of some event is the variable of interest. In the case of the time-to-toxicity data, the variable is the time from the beginning of an experiment until a tube is identified as positive. The statistical analysis used the SAS procedure LIFEREG and included determination of the form of the response surface, identification of the error distribution, and simplification of the response surface. We found that increasing the macromolecule concentration decreased the probability of toxin formation. The probability of toxin formation also decreased at lower temperatures and at pHs further from the optimum. The waiting time modeling approach to developing models for botulinal toxin formation compared favorably with other approaches but had one specific advantage. Waiting time models have the inherent advantage that safety concerns regarding predictions are automatically quantified in the analysis by formally identifying a distribution of times-to-toxicity. The use of this time-to-toxicity distribution permits a customizable margin of safety (e.g., one in a million) not possible with other approaches.     

Development of a Probiotic Cheddar Cheese Containing Human-Derived Lactobacillus paracasei Strains

Cheddar cheese was manufactured with either Lactobacillus salivarius NFBC 310, NFBC 321, or NFBC 348 or L. paracasei NFBC 338 or NFBC 364 as the dairy starter adjunct. These five strains had previously been isolated from the human small intestine and have been characterized extensively with respect to their probiotic potential. Enumeration of these strains in mature Cheddar cheese, however, was complicated by the presence of high numbers (>10⁷ CFU/g of cheese) of nonstarter lactic acid bacteria, principally composed of lactobacilli which proliferate as the cheese ripens. Attempts to differentiate the adjunct lactobacilli from the nonstarter lactobacilli based on bile tolerance and growth temperature were unsuccessful. In contrast, the randomly amplified polymorphic DNA method allowed the generation of discrete DNA fingerprints for each strain which were clearly distinguishable from those generated from the natural flora of the cheeses. Using this approach, it was found that both L. paracasei strains grew and sustained high viability in cheese during ripening, while each of the L. salivarius species declined over the ripening period. These data demonstrate that Cheddar cheese can be an effective vehicle for delivery of some probiotic organisms to the consumer.     

Mismatch Repair in Escherichia coli Cells Lacking Single-Strand Exonucleases ExoI, ExoVII, and RecJ

In vitro, the methyl-directed mismatch repair system of Escherichia coli requires the single-strand exonuclease activity of either ExoI, ExoVII, or RecJ and possibly a fourth, unknown single-strand exonuclease. We have created the first precise null mutations in genes encoding ExoI and ExoVII and find that cells lacking these nucleases and RecJ perform mismatch repair in vivo normally such that triple-null mutants display normal mutation rates. ExoI, ExoVII, and RecJ are either redundant with another function(s) or are unnecessary for mismatch repair in vivo.     

Analysis and Application of an Equilibrium Model forin vitroBioassay Systems with Three Components: Receptor, Hormone and Hormone-Binding-Protein

A simple theoretical framework is presented for bioassay studies using three componentin vitrosystems. An equilibrium model is used to derive equations useful for predicting changes in biological response after addition of hormone-binding-protein or as a consequence of increased hormone affinity. Sets of possible solutions for receptor occupancy and binding protein occupancy are found for typical values of receptor and binding protein affinity constants. Unique equilibrium solutions are dictated by the initial condition of total hormone concentration. According to the occupancy theory of drug action, increasing the affinity of a hormone for its receptor will result in a proportional increase in biological potency. However, the three component model predicts that the magnitude of increase in biological potency will be a small fraction of the proportional increase in affinity. With typical initial conditions a two-fold increase in hormone affinity for its receptor is predicted to result in only a 33% increase in biological response. Under the same conditions an 11-fold increase in hormone affinity for receptor would be needed to produce a two-fold increase in biological potency. Some currently used bioassay systems may be unrecognized three component systems and gross errors in biopotency estimates will result if the effect of binding protein is not calculated. An algorithm derived from the three component model is used to predict changes in biological response after addition of binding protein toin vitrosystems. The algorithm is tested by application to a published data set from an experimental study in anin vitrosystem (Limet al., 1990,Endocrinology127,1287–1291). Predicted changes show good agreement (within 8%) with experimental observations.     

INTRASPECIFIC TRANSFER OF HERBICIDE RESISTANCE IN THE RED MICROALGA PORPHYRIDIUM SP. (RHODOPHYCEAE) VIA PROTOPLAST FUSION

Stable progeny doubly resistant to the herbicides sulfometuron methyl (SMM) and diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] (DCMU) were obtained at a frequency of 2% on fusion of protoplasts derived from mutants of Porphyridium sp. (UTEX 637) that were resistant only to SMM (strain SMR) or DCMU (strain DC-2). In the presence of both herbicides, only the fusion progeny could grow; both parental mutants were inhibited. In the absence of SMM, the activity of acetohydroxy acid synthase (AHAS) in the wild-type strain was similar to that in DC-2, exceeding that of SMR by up to 4.5-fold. AHAS activities of all fusion progeny were lower than those of the wild-type strain and DC-2 but higher than that of SMR. In the presence of SMM, AHAS activities of all tested fusion progeny ranged between those of the two parental mutants. This result indicates that both types of AHAS, the type resistant to SMM and the sensitive type, originating from SMR and DC-2, respectively, were expressed in the fusion progeny. In the presence of DCMU, the photosynthetic activity of SMR was completely inhibited, whereas that of DC-2 was unaffected. The photosynthetic activity of the fusion progeny in the presence of DCMU was slightly lower than that of DC-2. Both the cell volume and the DNA content of the fusion progeny were similar to those of the parents. However, the genetic nature of the fusion products has not yet been elucidated. To the best of our knowledge, this is the first report on transfer of herbicide resistance via protoplast fusion in algae.