RAPD typing of Aspergillus chevalieri, Aspergillus nidulans, Aspergillus tetrazonus (quadrilineatus) and their teleomorphs using 5'-d[AACGCGCAAC]-3' and 5'-d[CCCGTCAGCA]-3' primers

Sexuality in fungi has long been a matter of concerns and debates that always necessitated extensive analysis of the relationship between organisms assumed to represent different developmental forms of the same organism. Moreover, mating-virulence correlation and the growing worry of opportunistic fungal infections in immunocompromised states associated with AIDS, cancer chemotherapy and organ transplantation protocols have been critically addressed nowadays. In view of that, we genetically characterized Aspergillus chevalieri, Aspergillus nidulans, Aspergillus tetrazonus (quadrilineatus) and their teleomorphs with RAPD analysis using 5'-d[AACGCGCAAC]-3' and 5'-d[CCCGTCAGCA]-3' primers. The reported similarities between the sexual and the asexual forms of the tested species, using Dice coefficient, ranged between 40% and 70% which holds pretty much with the current systematics of the genus. The study presents a rapid consistent method for identification of A. chevalieri, A. nidulans, A. tetrazonus (quadrilineatus) and their teleomorphs based on the banding pattern of RAPD-generated fragments that can be reliably used ahead of further applications on these species.     

Distribution of pathogenicity island markers and virulence factors in new phylogenetic groups of uropathogenic <Emphasis Type="Italic">Escherichia coli</Emphasis> isolates

The present study was aimed at investigating the relationship between the new Clermont’s phylogenetic groups, virulence factors, and pathogenicity island markers (PAIs) among uropathogenic Escherichia coli (UPEC) in Iran. This cross-sectional study was carried out on 140 UPEC isolates collected from patients with urinary tract infections in Bushehr, Iran. All isolates were subjected to phylogenetic typing using a new quadruplex-PCR method. The presence of PAI markers and virulence factors in UPEC strains was evaluated by multiplex PCR. The most predominant virulence gene was fimH (85%), followed by iucC (61.4%), papC (38.6%), hlyA (22.1%), cnf-1 (18.6%), afa (10.7%), papG and neuC (each 9.3%), ibeA (3.6%), and sfa/foc (0.7%). The most common phylogenetic group was related to B2 (39.3%), and the least common to A (0.7%). The most prevalent PAI marker was PAI IV536 (77.14%), while markers for PAI III536 (13.57%), PAI IIJ96 (12.86%), and PAI II536 (12.14%) were the least frequent among the UPEC strains. Meanwhile, the PAI IJ96 marker was not detected. There was a significant association between the phylogenetic group B2 and all the studied virulence genes and PAI markers. To our knowledge, this is the first study to compare the relationship between new phylogenetic groups, virulence genes and PAI markers in UPEC strains in Iran. The phylogenetic group B2 was predominantly represented among the studied virulence genes and PAI markers, indicating the preference of particular strains to carry virulence genes.     

Effect of annealing temperature and dopant concentration on the thermoluminescence sensitivity in LiF:Mg,Cu,Ag material

LiF:Mg,Cu,Ag is a new dosimetry material that is similar to LiF:Mg,Cu,P in terms of dosimetric properties. The effect of the annealing temperature in the range of 200 to 350°C on the thermoluminescence (TL) sensitivity and the glow curve structure of this material at different concentrations of silver (Ag) was investigated. It has been demonstrated that the optimum values of the annealing temperature and the Ag concentration are 240°C and 0.1 mol% for better sensitivity, respectively. The TL intensity decreases at annealing temperatures lower than 240°C or higher than 240°C, reaching a minimum at 300°C and then again increases for various Ag concentrations. It was observed that the glow curve structure altered and the area under the low temperature peak as well as the area under the main dosimetric peak decreased with increasing annealing temperature. The position of the main dosimetric peak moved in the direction of higher temperatures, but at 320 and 350°C annealing temperatures, it shifted to lower temperatures. It was also observed that the TL sensitivity could partially be recovered by a combined annealing procedure.     

<Emphasis Type="Italic">Lecanicillium muscarium</Emphasis> and <Emphasis Type="Italic">Adalia bipunctata</Emphasis> combination for the control of black bean aphid<Emphasis Type="Italic">, Aphis fabae</Emphasis>

The predator Adalia bipunctata (Coleoptera: Coccinellidae) and the entomopathogenic fungus Lecanicillium muscarium, have been considered as potential biological control against aphids. While it can be difficult to achieve a high control level of Aphis fabae Scopoli (Hemiptera: Aphididae) using only a single beneficial agent, the research presented here aimed to determine the interaction between L. muscarium and A. bipunctata potential for control against A. fabae. Lecanicillium muscarium was found to cause about 30% mortality in A. bipunctata and with a reduction in feeding by about 15%. However, co-application of A. bipunctata and L. muscarium can cause an addititive effect in reducing aphid populations, resulting in about 90% reduction in aphid populations compared with control treatment. Thus, these two biocontrol agents have the potential to be complementary. This research study demonstrates that it is possible to combine A. bipunctata with L. muscarium to provide a sustainable method for management of A. fabae on broad bean cropping system and that field studies are required.     

Earliness index deters <Emphasis Type="Italic">Pectinophora gossypiella</Emphasis> incidence on advanced cultivars of <Emphasis Type="Italic">Bt</Emphasis> cotton

Pink bollworm (Pectinophora gossypiella) is recognized as an important pest of cotton and can damage flowers and bolls of both Bt and non-Bt cultivars. Cry-1Ac in Bt cultivars is considered very effective in controlling lepidopterous larvae; therefore, the present study was carried out to investigate the impact of Cry1-Ac and the earliness index on the natural incidence of P. gossypiella at the Cotton Research Institute, Faisalabad. During 2015–2016, ten cultivars were used to determine the incidence of pink bollworm infestation. The experiment was repeated for 2 years. During the next year, Cry1-Ac and earliness traits of selected cultivars were also observed to determine their impact on pink bollworm. Correlation coefficient results regarding days to first flower (r value = 0.66) as well as the earliness index (r value = ? 0.62) exhibited a strong association with pink bollworm, but Cry1-Ac had a weak association (r value = ? 0.058) with pink bollworm. The coefficient of determination (R ²) explained that variability of pink bollworm due to Cry1-Ac, the earliness index, and days to first flower was 18.0, 38.5, and 43.5%, respectively. Principal component analysis results showed that the first two PCs expressed 87% of the total variability. Clusters made on the basis of the studied parameters revealed that clusters 2 and 3 comprised the cotton cultivars possessing earliness traits compared with cluster 1. Therefore, it can be concluded that the earliness index in cotton is an important component for the sustainable management of pink bollworm infestation, the need for which is endless to evade the pink bollworm problem in the era of climate change.     

Measurement of the CO2 apneic threshold in newborn infants: possible relevance for periodic breathing and apnea.

We measured the PCO2 apneic threshold in preterm and term infants. We hypothesized that, compared with adult subjects, the PCO2 apneic threshold in neonates is very close to the eupneic PCO2, likely facilitating the appearance of periodic breathing and apnea. In contrast with adults, who need to be artificially hyperventilated to switch from regular to periodic breathing, neonates do this spontaneously. We therefore measured the apneic threshold as the average alveolar PCO2 (PaCO2) of the last three breaths of regular breathing preceding the first apnea of an epoch of periodic breathing. We also measured the PaCO2 of the first three breaths of regular breathing after the last apnea of the same periodic breathing epoch. In preterm infants, eupneic PaCO2 was 38.6 +/- 1.4 Torr, the preperiodic PaCO2 apneic threshold was 37.3 +/- 1.4 Torr, and the postperiodic PaCO2 was 37.2 +/- 1.4 Torr. In term infants, the eupneic PaCO2 was 39.7 +/- 1.1 Torr, the preperiodic PaCO2 apneic threshold was 38.7 +/- 1.0 Torr, and the postperiodic value was 37.9 +/- 1.2 Torr. This means that the PaCO2 apneic thresholds were 1.3 +/- 0.1 and 1.0 +/- 0.2 Torr below eupneic PaCO2 in preterm and term infants, respectively. The transition from eupneic PaCO2 to PaCO2 apneic threshold preceding periodic breathing was accompanied by a minor and nonsignificant increase in ventilation, primarily related to a slight increase in frequency. The findings suggest that neonates breathe very close to their PCO2 apneic threshold, the overall average eupneic PCO2 being only 1.15 +/- 0.2 Torr (0.95-1.79, 95% confidence interval) above the apneic threshold. This value is much lower than that reported for adult subjects (3.5 +/- 0.4 Torr). We speculate that this closeness of eupneic and apneic PCO2 thresholds confers great vulnerability to the respiratory control system in neonates, because minor oscillations in breathing may bring eupneic PCO2 below threshold, causing apnea.     

Health risk assessment of heavy metals and metalloids via dietary intake of a potential vegetable (Coriandrum sativum L.) grown in contaminated water irrigated agricultural sites of Sargodha,Pakistan

Levels of Mo, As, Se, Fe, Cu, Zn, Ni, and Pb were determined in a vegetable commonly consumed in Pakistan. Samples were collected from three different sites (Ratokala, Phularwan, and Mailowal) supplied with three different water sources. Mo and Pb in water and Mo and As in C. sativum were higher than the suggested standards at the international level. Lower bioconcentration factor and pollution load index were seen at Site-I than at other sites. A positive association was found between the rhizosphere metals and those of the vegetable at all three sites. Enrichment factor at three sites ranged from 0.28 to 10.39. The highest value of daily intake of metals was found for Fe (0.245 mg/kg/day) and of the health risk index for As (70.41) at the wastewater inundated site. It is inferred that uptake of Mo, As, Cu, Ni, and Pb through C. sativum represents a high health danger to the individuals using this vegetable.     

Accumulation of metals and metalloids in radish (Raphanus sativus L.) and spinach (Spinacea oleracea L.) irrigated with domestic wastewater in the peri-urban areas of Khushab City,Pakistan

Accumulation of different metals and metalloids was assessed in two vegetables radish (Raphanus sativus L.) and spinach (Spinacea oleracea L.) irrigated with domestic wastewater in the peri-urban areas of Khushab City, Pakistan. In general, the metal and metalloid concentrations in radish and spinach were higher at site-II treated with sewage water than those found at site-I treated with canal water. In case of radish at both sites the levels of metals (Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Mo, Cd, and Pb) were below the permissible level except those of Mn, Ni, Mo, Cd, and Pb. At both sites, the transfer factor ranged from 0.047–228.3 mg kg^?1 with Cr having the highest transfer factor. The metal pollution index in soil was in the following order: As > Fe > Ni > Zn > Cd > Mo > Se > Co > Pb > Mn > Cr > Cu, respectively. While in case of spinach at both sites, the concentrations of metals and metalloids in vegetable samples irrigated with canal and sewage water were observed below the permissible level except Mn, Ni, Zn, Mo, and Pb. At both sites, the transfer factor ranged from 0.038–245.4 mg kg^?1 with Cr having the highest transfer factor. The metal pollution index in soil was in the following order: Cd > Ni > Co > Se > Mn > Zn > Mo > Pb > Fe > Cr > As > Cu, respectively.     

Association analysis for agronomic traits in wheat under terminal heat stress

Terminal heat stress causes irreversible damage to wheat crop productivity. It reduces the vegetative growth and flowering period that consequently declines the efficiency to capture available stem reserves (carbohydrates) in grains. Markers associated with thermotolerant traits ease in marker assisted selection (MAS) for crop improvement. It identifies the genomic regions associated with thermotolerant traits in wheat, but the scarcity of markers is the major hindrance in crop improvement. Therefore, 158 wheat genotypes were subjected to genotyping with 165 simple sequence repeat markers dispersed on three genomes (A, B and D). Allelic frequency and polymorphic information content values were highest on genome A (5.34 (14% greater than the lowest value at genome D) and 0.715 (3% greater than the lowest value at genome D)), chromosome 4 (5.40 (16% greater than the lowest value at chromosome 2) and 0.725 (5% greater than the lowest value at chromosome 6)) and marker xgwm44 (13.0 (84% greater than the lowest value at marker xbarc148) and 0.916 (46% greater than the lowest value at marker xbarc148)). Bayesian based population structure discriminated the wheat genotypes into seven groups based on genetic similarity indicating their ancestral origin and geographical ecotype. Linkage disequilibrium pattern had highest significant (P < 0.001) linked loci pairs 732 on genome A at r² > 0.1 whereas, 58 on genome B at r² > 0.5. Linkage disequilibrium decay (P < 0.01 and r² > 0.1) had larger LD block (5–10 cM) on genome A. Highly significant MTAs (P < 0.000061) under heat stress conditions were identified for flag leaf area (xwmc336), spikelet per spike (xwmc553), grains per spike (cxfa2147, xwmc418 and xwmc121), biomass (xbarc7) and grain yield (xcfa2147 and xwmc671). The identified markers in this study could facilitate in MAS and gene pyramiding against heat stress in wheat.     

Identification of drought tolerant Chickpea genotypes through multi trait stability index

Drought is a major and constantly increasing abiotic stress factor, thus limiting chickpea production. Like other crops, Kabuli Chickpea genotypes are screened for drought stress through Multi-environment trials (METs). Although, METs analysis is generally executed taking into account only one trait, which provides less significant reliability for the recommendation of genotypes as compared to multi trait-based analysis. Multi trait-based analysis could be used to recommend genotypes across diverse environments. Hence, current research was conducted for selection of superior genotypes through multi-trait stability index (MTSI) by using mixed and fixed effect models under six diverse environments. The genotypic stability was computed for all traits individually using the weighted average of absolute scores from the singular value decomposition of the matrix of best linear unbiased predictions for the genotype vs environment interaction (GEI) effects produced by a linear mixed-effect model index. A superiority index, WAASBY was measured to reflect the MPS (Mean performance and stability). The selection differential for the WAASBY index was 11.2%, 18.49% and 23.30% for grain yield (GY), primary branches per plant (PBP) and Stomatal Conductance (STOMA) respectively. Positive selection differential (0.80% ≤ selection differential ≤ 13.00%) were examined for traits averaged desired to be increased and negative (-0.57% ≤ selection differential ≤ -0.23%) for those traits desired to be reduced. The MTSI may be valuable to the plant breeders for the selection of genotypes based on many characters as being strong and simple selection process. Analysis of MTSI for multiple environments revealed that, the genotypes G20, G86, G31, G28, G116, G12, G105, G45, G50, G10, G30, G117, G81, G48, G85, G17, G32, G4, and G37 were the most stable and high yielding out of 120 chickpea genotypes, probably due to high MPS of selected traits under various environments. It is concluded that identified traits can be utilized as genitors in hybridization programs for the development of drought tolerant Kabuli Chickpea breeding material.