MV-mimicking micelles loaded with PEG-serine-ACP nanoparticles to achieve biomimetic intra/extra fibrillar mineralization of collagen in vitro

Since their discovery, matrix vesicles (MVs) containing minerals have received considerable attention for their role in the mineralization of bone, dentin and calcified cartilage. Additionally, MVs' association with collagen fibrils, which serve as the scaffold for calcification in the organic matrix, has been repeatedly highlighted. The primary purpose of the present study was to establish a MVs–mimicking model (PEG-S-ACP/micelle) in vitro for studying the exact mechanism of MVs-mediated extra/intra fibrillar mineralization of collagen in vivo. In this study, high-concentration serine was used to stabilize the amorphous calcium phosphate (S-ACP), which was subsequently mixed with polyethylene glycol (PEG) to form PEG-S-ACP nanoparticles. The nanoparticles were loaded in the polysorbate 80 micelle through a micelle self-assembly process in an aqueous environment. This MVs–mimicking model is referred to as the PEG-S-ACP/micelle model. By adjusting the pH and surface tension of the PEG-S-ACP/micelle, two forms of minerals (crystalline mineral nodules and ACP nanoparticles) were released to achieve the extrafibrillar and intrafibrillar mineralization, respectively. This in vitro mineralization process reproduced the mineral nodules mediating in vivo extrafibrillar mineralization and provided key insights into a possible mechanism of biomineralization by which in vivo intrafibrillar mineralization could be induced by ACP nanoparticles released from MVs. Also, the PEG-S-ACP/micelle model provides a promising methodology to prepare mineralized collagen scaffolds for repairing bone defects in bone tissue engineering.     

Infrared spectroscopy of proteins

This review discusses the application of infrared spectroscopy to the study of proteins. The focus is on the mid-infrared spectral region and the study of protein reactions by reaction-induced infrared difference spectroscopy.     

An automated technique for monitoring carbon dioxide respired by insects*

ABSTRACT. A non-dispersive infrared gas analyser equipped with a Luft-type sonic detector and flow-through reference cell was automated to monitor the total volume of carbon dioxide (CO₂) respired by single insects or groups of insects. The infrared analyser was interfaced with an integrator for quantification, a microprocessor to control intermittent air flow through the insect respiration chambers, and a microcomputer for data storage and reduction. This technique has been used to monitor the CO₂ Output of diapausing and non-diapausing mature fifth instar larvae and of developing pupae of the codling moth, Cydia pomonella (L.) (Lepidoptera: Tortricidae). The resulting data were accurate, quantitative and reproducible.     

Thermographic visualization of cell death in tobacco and Arabidopsis

Pending cell death was visualized by thermographic imaging in bacterio‐opsin transgenic tobacco plants. Cell death in these plants was characterized by a complex lesion phenotype. Isolated cell death lesions were preceded by a colocalized thermal effect, as previously observed at sites infected by tobacco mosaic virus (TMV) ( Chaerle et al. 1999 Nature Biotechnology 17, 813–816). However, in most cases, a coherent front of higher temperature, trailed by cell death, initiated at the leaf base and expanded over the leaf lamina. In contrast to the homogenous thermal front, cell death was first visible close to the veins, and subsequently appeared as discrete spots on the interveinal tissue, as cell death spread along the veins. Regions with visible cell death had a lower temperature because of water evaporation from damaged cells. In analogy with previous observations on the localized tobacco–TMV interaction ( Chaerle et al. 1999 ), the kinetics of thermographic and continuous gas exchange measurements indicated that stomatal closure preceded tissue collapse. Localized spontaneous cell death could also be presymptomatically visualized in the Arabidopsis lsd2 mutant.     

Zoning eco-environmental vulnerability for environmental management and protection

Eco-environmental vulnerability assessment is crucial for environmental and resource management. However, evaluation of eco-environmental vulnerability over large areas is a difficult and complex process because it is affected by many variables including hydro-meteorology, topography, land resources, and human activities. The Thua Thien – Hue Province and its largest river system, the Perfume River, are vital to the social-economic development of the north central coastal region of Vietnam, but there is no zoning system for environmental protection in this region. An assessment framework is proposed to evaluate the vulnerable eco-environment in association with 16 variables with 6 of them constructed from Landsat 8 satellite image products. The remaining variables were extracted from digital maps. Each variable was evaluated and spatially mapped with the aid of an analytical hierarchy process (AHP) and geographical information system (GIS). An eco-environmental vulnerability map is assorted into six vulnerability levels consisting of potential, slight, light, medium, heavy, and very heavy vulnerabilities, representing 14%, 27%, 17%, 26%, 13%, 3% of the study area, respectively. It is found that heavy and very heavy vulnerable areas appear mainly in the low and medium lands where social-economic activities have been developing rapidly. Tiny percentages of medium and heavy vulnerable levels occur in high land areas probably caused by agricultural practices in highlands, slash and burn cultivation and removal of natural forests with new plantation forests. Based on our results, three ecological zones requiring different development and protection solutions are proposed to restore local eco-environment toward sustainable development. The proposed integrated method of remote sensing (RS), GIS, and AHP to evaluate the eco-environmental vulnerability is useful for environmental protection and proper planning for land use and construction in the future.     

Membrane-damaging action of ricin on DPPC and DPPC-cerebrosides assemblies

Perturbations induced by a toxic lectin (ricin) on lipid organisation of model membranes prepared with DPPC and DPPC-cerebrosides mixtures have been analysed by Raman and infrared spectroscopy, two powerful and non-invasive methods. Our approach involves the observation of changes in the vibrational spectra of liquid multilayers in the PO ₂ ^- , C=0 and CH₂ spectral regions for two lipid: ricin molar ratios (225:1, 75:1).The interfacial and polar regions of the multilayers, analysed by FTIR, appear to be perturbed by the protein. With both kinds of membranes, ricin mainly perturbs the C=0 ester groups of the sn-2 acylchain of DPPC. In the PO ₂ ^- stretching region, the frequency shifts are correlated with changes in polar group hydration.In the hydrophobic core of the multilayer membrane studied by Raman spectroscopy, the interaction of ricin is associated with changes in lipid packing. These perturbations depend upon the lipid composition of the membrane. With DPPC membranes, an affect is detected at temperatures lower than T _m .It corresponds to a decrease of the lipid ordering. With DPPC-cer membranes, the protein increases the acylchain packing order regardless of the temperature of the experiments (10°C<T<75°C). No perturbation of T _m is observed after addition of ricin to either DPPC or DPPC-cer membranes.The different perturbations detected by Raman and FTIR suggest that ricin mainly interacts with the interfacial domains of the membranes.     

Backbone side-chain interactions in peptides

IR, ¹H-NMR and X-ray experiments have been carried out on dipeptides with the Pro-Asp and Pro-Asn sequences protected on both ends by amide groups. The Pro-Asp dipeptide was investigated for the carboxylic, methyl ester and carboxylate forms of the Asp residue.In solution, all dipeptides are found to accommodate almost exclusively the I-turn conformation stabilized by an interaction between the Asp or Asn-NH and CO bonds. The I-turn percentage roughly parallels the basicity of the Asp or Asn side substituent, and decreases from Asp^- to Asn, and to Asp or Asp (OMe).The I-turn, stabilized by the interaction involving the Asp-CO site, is retained in the crystal structure of the Pro-Asp(OMe) dipeptide. The Pro-Asp and Pro-Asn dipeptides assume a II-turn conformation in the solid state and the polar Asp or Asn side-groups are involved in a complex network of intermolecular interactions.     

Genetic variation detected by use of the M13 “DNA fingerprint” probe in Malus,Prunus, and Rubus (Rosaceae)

Summary Recently, DNA fingerprints have been reported in a wide array of organisms. We used the M13 repeat probe on several genera and species in the angiosperm family Rosaceae. Four apple cultivars could be differentiated when any one of five restriction enzymes was used to analyze minisatellite DNA. Similarly, four individual trees of Prunus serotina (black cherry) exhibited different fingerprints with each of four enyzmes. A total of 14 Rubus (blackberries and raspberries) plants representing four species were investigated with two enzymes. Extensive inter-and intraspecific variation was found. However, some closely growing plants had identical fingerprints, probably due to their being derived through vegetative propagation.     

Detection of Water in Lipase-Catalyzed Reactions in Reverse Micelles as Studied by Infrared Spectroscopy

The hydrolytic activity of lipolytic enzymes in reverse micelles can be measured continuously with Fourier Transform infrared spectroscopy (FTIR) by following in the region of the OH-stretching band the water consumption during the reaction. This possibility is unique to reverse micellar solutions, because they are optically transparent and because they contain only a limited amount of water.