Looking into flowering time in almond (Prunus dulcis (Mill) D. A. Webb): the candidate gene approach

Blooming time is one of the most important agronomic traits in almond. Biochemical and molecular events underlying flowering regulation must be understood before methods to stimulate late flowering can be developed. Attempts to elucidate the genetic control of this process have led to the identification of a major gene (Lb) and quantitative trait loci (QTLs) linked to observed phenotypic differences, but although this gene and these QTLs have been placed on the Prunus reference genetic map, their sequences and specific functions remain unknown. The aim of our investigation was to associate these loci with known genes using a candidate gene approach. Two almond cDNAs and eight Prunus expressed sequence tags were selected as candidate genes (CGs) since their sequences were highly identical to those of flowering regulatory genes characterized in other species. The CGs were amplified from both parental lines of the mapping population using specific primers. Sequence comparison revealed DNA polymorphisms between the parental lines, mainly of the single nucleotide type. Polymorphisms were used to develop co-dominant cleaved amplified polymorphic sequence markers or length polymorphisms based on insertion/deletion events for mapping the candidate genes on the Prunus reference map. Ten candidate genes were assigned to six linkage groups in the Prunus genome. The positions of two of these were compatible with the regions where two QTLs for blooming time were detected. One additional candidate was localized close to the position of the Evergrowing gene, which determines a non-deciduous behaviour in peach.     

Quantitative trait loci and candidate gene mapping of aluminum tolerance in diploid alfalfa

Aluminum (Al) toxicity in acid soils is a major limitation to the production of alfalfa (Medicago sativa subsp. sativa L.) in the USA. Developing Al-tolerant alfalfa cultivars is one approach to overcome this constraint. Accessions of wild diploid alfalfa (M. sativa subsp. coerulea) have been found to be a source of useful genes for Al tolerance. Previously, two genomic regions associated with Al tolerance were identified in this diploid species using restriction fragment length polymorphism (RFLP) markers and single marker analysis. This study was conducted to identify additional Al-tolerance quantitative trait loci (QTLs); to identify simple sequence repeat (SSR) markers that flank the previously identified QTLs; to map candidate genes associated with Al tolerance from other plant species; and to test for co-localization with mapped QTLs. A genetic linkage map was constructed using EST-SSR markers in a population of 130 BC₁F₁ plants derived from the cross between Al-sensitive and Al-tolerant genotypes. Three putative QTLs on linkage groups LG I, LG II and LG III, explaining 38, 16 and 27% of the phenotypic variation, respectively, were identified. Six candidate gene markers designed from Medicago truncatula ESTs that showed homology to known Al-tolerance genes identified in other plant species were placed on the QTL map. A marker designed from a candidate gene involved in malic acid release mapped near a marginally significant QTL (LOD 2.83) on LG I. The SSR markers flanking these QTLs will be useful for transferring them to cultivated alfalfa via marker-assisted selection and for pyramiding Al tolerance QTLs.     

Mapping of genes affecting linolenic acid content in Brassica rapa ssp. oleifera

F₂ progeny segregating for linolenic acid content were used to identify genes and develop markers for linolenic acid in spring turnip rape (Brassica rapa ssp. oleifera). A candidate gene approach applying the rapeseed fad3 gene and bulked segregant analysis with RAPD markers was used. A total of 27 markers were distributed in three linkage groups which each exhibited a QTL for linolenic acid. Jointly the three QTLs accounted for 73.5% of the variation in linolenic acid level in this population. The fad3 gene was mapped near one QTL controlling 23.5% of the variation. Allele-specific markers were developed for fad3 and can be used for marker-assisted selection in future spring turnip rape breeding programmes.     

Evaluation of genes from <Emphasis Type="Italic">eIF4E</Emphasis> and <Emphasis Type="Italic">eIF4G</Emphasis> multigenic families as potential candidates for partial resistance QTLs to <Emphasis Type="Italic">Rice yellow mottle virus</Emphasis> in rice

QTLs for partial resistance to Rice yellow mottle virus (RYMV) in rice were mapped in two populations of doubled-haploid lines (DHLs) and recombinant inbred lines (RILs) derived from the same cross but evaluated for different resistance criteria (virus content and symptom severity). An integrative map was used to compare the two genetic maps and a global analysis of both populations was performed. Most of the QTLs previously identified in DHL population were confirmed with increased significance and precision. As many recent studies evidenced the role of eukaryotic translation initiation factors (eIF) of 4E and 4G families in plant susceptibility to RNA viruses, we checked if these genes co-locate with QTLs of resistance to RYMV. Their systematic in silico identification was carried out on the rice genome and their physical locations were compared to QTL positions on the integrative map. In order to confirm or not the co-locations observed, the analysis was completed by evaluation of near-isogenic lines, QTL fine mapping and sequencing of candidate genes. Three members from eIF4G family could be retained as reliable candidates whereas eIF4E genes, commonly found to govern resistances in other plant/virus interactions, were discarded. Together with the recent identification of an eIF(iso)4G as a major resistance gene, data suggests an important role of genes from eIF4G family in rice resistance to RYMV but does not exclude the contribution of factors different from the translation initiation complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mixed-model QTL mapping for kernel hardness and dough strength in bread wheat

Plant breeding data comprise unbalanced phenotypic data for inbreds with complex pedigrees. As traditional methods to map quantitative trait loci (QTL) cannot exploit plant breeding data, an alternative approach is QTL mapping via a mixed-model procedure. Our objective was to validate mixed-model QTL mapping for self-pollinated crops by detecting QTL for kernel hardness and dough strength from data in a bread wheat (Triticum aestivum L.) breeding program. We studied 80 parental and 373 experimental inbreds genotyped for 65 simple sequence repeat (SSR) markers and three candidate loci. The methodology involved three steps: variance component estimation, single-marker analyses, and a final multiple-marker analysis with marker effects treated as fixed effects. Two QTLs for kernel hardness were detected on chromosomes 1A (close to candidate locus GluA3) and 5D (close to candidate locus Ha). Four QTLs were detected for dough strength on chromosomes 1A, 1B, 1D, and 5B. Candidate gene GluA1, which was associated with dough strength, was the only candidate locus found significant. Results were consistent with previously reported markers and QTLs associated with kernel hardness and dough strength. Unlike previous studies that have assumed QTL effects as random, the assumption of fixed marker effects identified the favorable marker alleles to select for. We conclude that the detection of previously mapped QTL validates the usefulness of mixed-model QTL mapping in the context of a plant-breeding program.     

Detection of quantitative trait loci for heading date based on the doubled haploid progeny of two elite Chinese wheat cultivars

Quantitative trait loci (QTLs) with epistatic and QTL × environment (QE) interaction for heading date were studied using a doubled haploid (DH) population containing 168 progeny lines derived from a cross between two elite Chinese wheat cultivars Huapei 3 × Yumai 57 (Triticum aestivum L.). A genetic map was constructed based on 305 marker loci, consisting of 283 SSR loci and 22 EST-SSR markers, which covered a total length of 2141.7 cM with an average distance of 7.02 cM between adjacent markers in the genome. QTL analyses were performed using a mixed linear model approach. Two main-effect QTLs and two pairs of digenic epistatic effects were detected for heading date on chromosomes 1B, 2B, 5D, 6D, 7A, and 7D at three different environments in 2005 and 2006 cropping seasons. A highly significant QTL with an F-value 148.96, designated as Qhd5D, was observed within the Xbarc320-Xwmc215 interval on chromosome 5DL, accounting for 53.19% of the phenotypic variance and reducing days-to-heading by 2.77 days. The Qhd5D closely links with a PCR marker Xwmc215 with the genetic distance 2.1 cM, which can be used in molecular marker-assisted selection (MAS) in wheat breeding programs. Moreover, the Qhd5D was located on the similar position of well-characterised vernalization sensitivity gene Vrn-D1. We are also spending more efforts to develop near-isogenic lines to finely map the Qhd5D and clone the gene Vrn-D1 through map-based cloning. The Qhd1B with additive effect on heading date has not been reported in previous linkage mapping studies, which might be a photoperiod-sensitive gene homoeologous to the Ppd-H2 gene on chromosome 1B. No main-effect QTLs for heading date were involved in epistatic effects.     

Comparative genome and QTL mapping between maritime and loblolly pines

Genetic markers developed from expressed sequence tags (ESTs) were used as orthologous loci for comparative genome studies in the genus Pinus. A total of 309 ESTs derived from conifer gene sequences were tested for amplification and polymorphism in maritime pine (Pinus pinaster Ait.). Electrophoresis-based techniques made it possible to map 50 expressed sequence tag polymorphisms (ESTPs). The map positions of 32 markers were compared to putative orthologous loci on the loblolly pine (Pinus taeda L.) linkage map, which is the reference map of the conifer genetic mapping community. Overall, synteny was maintained between the two species. This report agrees with other pairwise genome comparisons in pine and supports the cytogenetic evidence that chromosome evolution in the genus is conservative. The alignment of homologous linkage groups allowed, for the first time in conifers, the comparison of QTL location. The position of two QTLs controlling wood density and cell wall components were found to be conserved between the two species.     

水稻蒸煮品质相关QTL定位及候选基因分析

挖掘与稻米蒸煮品质相关的数量性状基因座(quantitative trait locus, QTL)，分析候选基因，并通过遗传育种手段改良稻米蒸煮品质相关性状，可有效提升稻米的口感。以籼稻华占(Huazhan, HZ)、粳稻热研2号(Nekken2)及由其构建的120个重组自交系(recombinant inbred lines, RILs)群体为实验材料，测定成熟期稻米的糊化温度(gelatinization temperature, GT)、胶稠度(gel consistency, GC)和直链淀粉含量(amylose content, AC)。结合高密度分子遗传图谱进行QTL定位，共检测到26个与稻米蒸煮品质相关的QTLs (糊化温度相关位点1个、胶稠度相关位点13个、直链淀粉含量相关位点12个)，其中最高奇数的可能性(likelihood of odd, LOD)值达30.24。通过实时荧光定量PCR (quantitative real-time polymerase chain reaction, qRT-PCR)分析定位区间内候选基因的表达量，发现6个基因在双亲间的表达量差异显著，推测LOC_Os04g20270和LOC_Os11g40100的高表达可能会极大地提高稻米的胶稠度，而LOC_Os01g04920和LOC_Os02g17500的高表达以及LOC_Os03g02650和LOC_Os05g25840的低表达有助于降低直链淀粉含量。这些结果为培育优质水稻新品种奠定了分子基础，并为揭示稻米蒸煮品质的分子调控机制提供了重要的遗传资源。     

Both stable and unstable QTLs for resistance to powdery mildew are detected in apple after four years of field assessments

Powdery mildew, caused by the ascomycete fungus Podosphaera leucotricha, is one of the most damaging diseases of apple worldwide. Polygenically determined resistance might contribute to a significant increase of resistance to this disease in new cultivars. A quantitative trait locus (QTL) analysis was performed in an F₁ progeny derived from a cross between the apple cultivar Discovery and the apple hybrid TN10-8. Powdery mildew incidence was assessed during four years (five seasons) in spring and/or autumn in a French local orchard. Seven additive and/or dominant QTLs were detected over the five seasons, with effects (R ²) ranging from 7.5% to 27.4% of the progeny phenotypic variation. Two QTLs, on linkage groups (LGs) 2 and 13, were consistently identified and accounted together from 29% to 37% of the phenotypic variation according to the year of assessment. The other QTLs were identified during one (LGs 1, 14), two (LG10), or three (LGs 8, 17) seasons. Their instability indicated a changing genetic determinism according to the year of assessment, for which several hypotheses may be put forward. The QTLs on LGs 2 and 8 mapped close to clusters of resistance gene analogs (RGAs) and major genes for resistance to mildew or apple scab previously identified. The stable QTLs identified on LGs 2 and 13, together with the strong effect QTL located on LG 8, are of special interest for breeding purposes, especially if combined with other major resistance genes.     

玉米抗甘蔗花叶病毒基因的比较定位

收集了玉米抗甘蔗花叶病毒基因/QTL定位信息, 借助玉米遗传图谱IBM2 2005 Neighbors进行了整合。在国内外研究中, 累计报道81个抗病毒基因位点, 分布在玉米7条染色体上, 比较定位发现这些位点集中分布于第3和6染色体。采用元分析技术, 确定3个“一致性”抗病毒QTL, 其中1个位于第3染色体, 在遗传图谱IBM2 2005 Neighbors上覆盖的范围为6.44 cM; 2个位于第6染色体, 覆盖范围分别为6.16 cM和27.48 cM。借助比较基因组学策略, 在第3染色体“一致性”QTL区间内筛选出4个抗病位置候选基因。该研究结果为确定和克隆抗病主效基因提供了基础。     

QTL × N-level interaction for plant height in rice (Oriza Sativa L.)

Quantitative trait loci (QTLs) for plant height in rice were mapped onto the molecular marker linkage map of a double-haploid (DH) population derived from a cross between IR64 and Azucena under low and high N levels, in both nutrient solution and soil culture experiments. Two QTLs, one on chromosome 1 and the other on chromosome 8, were detected at high N levels in soil and/or nutrient solution culture experiments. A total of 8 QTLs were identified at low N level in the soil and/or nutrient solution culture experiments, which located on chromosomes 1, 2, 3, 4, 5 and 6, respectively. The QTL flanked by the molecular markers RZ730 RZ801 on chromosome 1 was identified in all experimental conditions. This position corresponds to sd-1, a semi-dwarfing gene. The QTLs on chromosomes 2, 3, 4, 5 and 6 were only detected at low N level and the QTL on chromosome 8 was only detected at high N level in the nutrient solution culture experiment. Based on the differing responses to low N stress between two parents and the QTL×N-level interaction observed in this study, it is suggested that the expression of several QTLs associated with plant height could be induced by low N stress.     

Restriction fragment length polymorphism analysis of loci associated with disease resistance genes and developmental traits in Pisum sativum L.

An F₂ population of pea (Pisum sativum L.) consisting of 174 plants was analysed by restriction fragment length polymorphism (RFLP) and random amplified polymorphic DNA (RAPD) techniques. Ascochyta pisi race C resistance, plant height, flowering earliness and number of nodes were measured in order to map the genes responsible for their variation. We have constructed a partial linkage map including 3 morphological character genes, 4 disease resistance genes, 56 RFLP loci, 4 microsatellite loci and 2 RAPD loci. Molecular markers linked to each resistance gene were found: Fusarium wilt (6 cM from Fw), powdery mildew (11 cM from er) and pea common Mosaic virus (15 cM from mo). QTLs (quantitative traits loci) for Ascochyta pisi race C resistance were mapped, with most of the variation explained by only three chromosomal regions. The QTL with the largest effect, on chromosome 4, was also mapped using a qualitative, Mendelian approach. Another QTL displayed a transgressive segregation, i.e. the parental line that was susceptible to Ascochyta blight had a resistance allele at this QTL. Analysis of correlations between developmental traits in terms of QTL effects and positions suggested a common genetic control of the number of nodes and earliness, and a loose relationship between these traits and height.     

Consistent detection of QTLs for crown rust resistance in Italian ryegrass (<Emphasis Type="Italic">Lolium multiflorum</Emphasis> Lam.) across environments and phenotyping methods

Crown rust, caused by Puccinia coronata f. sp. lolii, is one of the most important diseases of temperate forage grasses, such as ryegrasses (Lolium spp.), affecting yield and nutritional quality. Therefore, resistance to crown rust is a major goal in ryegrass breeding programmes. In a two-way pseudo-testcross population consisting of 306 Lolium multiflorum individuals, multisite field evaluations as well as alternative methods based on artificial inoculation with natural inoculate in controlled environments were used to identify QTLs controlling resistance to crown rust. Disease scores obtained from glasshouse and leaf segment test (LST) evaluations were highly correlated with scores from a multisite field assessment (r = 0.66 and 0.79, P < 0.01, respectively) and thus confirmed suitability of these methods for crown rust investigations. Moreover, QTL mapping based on a linkage map consisting of 368 amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers revealed similar results across different phenotyping methods. Two major QTLs were consistently detected on linkage group (LG) 1 and LG 2, explaining up to 56% of total phenotypic variance (V _p). Nevertheless, differences between position and magnitude of QTLs were observed among individual field locations and suggested the existence of specific local pathogen populations. The present study not only compared QTL results among crown rust evaluation methods and environments, but also identified molecular markers closely linked to previously undescribed QTLs for crown rust resistance in Italian ryegrass with the potential to be applied in marker-assisted forage crop breeding. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Characterization of AFLP Markers Associated with Growth in the Kuruma Prawn, <Emphasis Type="Italic">Marsupenaeus japonicus</Emphasis>, and Identification of a Candidate Gene

Growth rate of the Kuruma prawn, Marsupenaeus japonicus is an important economic trait, with larger animals commanding higher market prices. To identify gene markers associated with growth, a genetic map of a full-sib F₂ intercross family of M. japonicus has previously been generated and quantitative trait loci (QTL) influencing weight, total length, and carapace length were identified. In this study, amplified fragment length polymorphism (AFLP) markers associated with the major QTL region, contributing 16% to phenotypic variation, were characterized. Flanking sequence has been obtained and allelic variants responsible for segregation patterns of these markers have been identified. The genomic sequence surrounding the AFLP band 7.21a, residing under the QTL peak, contains a gene sequence homologous to the elongation of very long chain fatty acids-like (ELOVL) protein family. A full-length mRNA (ELOVL-MJ) encoding this protein was isolated from M. japonicus, representing both the first ELOVL gene in crustacea and the first candidate gene identified via QTL studies in crustacea.     

Mapping of quantitative trait loci (QTLs) for oil yield using SSRs and gene-based markers in African oil palm (<Emphasis Type="Italic">Elaeis guineensis</Emphasis> Jacq.)

The identification of quantitative trait loci (QTLs) based on anchor markers, especially candidate genes that control a trait of interest, has been noted to increase the power of QTL detection. Since these markers can be scored as co-dominant data, they are also valuable for comparing and integrating the QTL linkage maps from diverse mapping populations. To estimate the position and effects of QTLs linked to oil yield traits in African oil palm, co-dominant microsatellites (SSR) and candidate gene-based sequence polymorphisms were applied to construct a linkage map for a progeny showing large differences in oil yield components. The progeny was genotyped for 97 SSR markers, 93 gene-linked markers, and 12 non-gene-linked SNP markers. From these, 190 segregating loci could be arranged into 31 linkage groups while 12 markers remained unmapped. Using the single marker linkage, interval mapping and multiple QTL methods, 16 putative QTLs on seven linkage groups affecting important oil yield related traits such as fresh fruit bunch yield (FFB), ratio of oil per fruit (OF), oil per bunch (OB), fruit per bunch (FB) and wet mesocarp per fruit (WMF) could be identified in the segregating population with estimated values for explained variance ranging from 12.4 % to 54.5 %. Markers designed from some candidate genes involved in lipid biosynthesis were found to be mapped near significant QTLs for various economic yield traits. Associations between QTLs and potential candidate genes are discussed.     

The genetic and functional analysis of flavor in commercial tomato: the FLORAL4 gene underlies a QTL for floral aroma volatiles in tomato fruit

Tomato (Solanum lycopersicum L.) has become a popular model for genetic studies of fruit flavor in the last two decades. In this article we present a study of tomato fruit flavor, including an analysis of the genetic, metabolic and sensorial variation of a collection of contemporary commercial glasshouse tomato cultivars, followed by a validation of the associations found by quantitative trait locus (QTL) analysis of representative biparental segregating populations. This led to the identification of the major sensorial and chemical components determining fruit flavor variation and detection of the underlying QTLs. The high representation of QTL haplotypes in the breeders’ germplasm suggests that there is great potential for applying these QTLs in current breeding programs aimed at improving tomato flavor. A QTL on chromosome 4 was found to affect the levels of the phenylalanine‐derived volatiles (PHEVs) 2‐phenylethanol, phenylacetaldehyde and 1‐nitro‐2‐phenylethane. Fruits of near‐isogenic lines contrasting for this locus and in the composition of PHEVs significantly differed in the perception of fruity and rose‐hip‐like aroma. The PHEV locus was fine mapped, which allowed for the identification of FLORAL4 as a candidate gene for PHEV regulation. Using a gene‐editing‐based (CRISPR‐CAS9) reverse‐genetics approach, FLORAL4 was demonstrated to be the key factor in this QTL affecting PHEV accumulation in tomato fruit.     

QTL mapping and GWAS reveal candidate genes controlling capsaicinoid content in Capsicum

Capsaicinoids are unique compounds produced only in peppers (Capsicum spp.). Several studies using classical quantitative trait loci (QTLs) mapping and genomewide association studies (GWAS) have identified QTLs controlling capsaicinoid content in peppers; however, neither the QTLs common to each population nor the candidate genes underlying them have been identified due to the limitations of each approach used. Here, we performed QTL mapping and GWAS for capsaicinoid content in peppers using two recombinant inbred line (RIL) populations and one GWAS population. Whole‐genome resequencing and genotyping by sequencing (GBS) were used to construct high‐density single nucleotide polymorphism (SNP) maps. Five QTL regions on chromosomes 1, 2, 3, 4 and 10 were commonly identified in both RIL populations over multiple locations and years. Furthermore, a total of 109 610 SNPs derived from two GBS libraries were used to analyse the GWAS population consisting of 208 C. annuum‐clade accessions. A total of 69 QTL regions were identified from the GWAS, 10 of which were co‐located with the QTLs identified from the two biparental populations. Within these regions, we were able to identify five candidate genes known to be involved in capsaicinoid biosynthesis. Our results demonstrate that QTL mapping and GBS‐GWAS represent a powerful combined approach for the identification of loci controlling complex traits.