Biosorption of cadmium(II), lead (II) and copper(II) with the filamentous fungus Phanerochaete chrysosporium

The biosorption from artificial wastewaters of heavy metals (Cd(II), Pb(II) and Cu(II)) onto the dry fungal biomass of Phanerochaete chryosporium was studied in the concentration range of 5-500 mg l(-1). The maximum absorption of different heavy metal ions on the fungal biomass was obtained at pH 6.0 and the biosorption equilibrium was established after about 6 h. The experimental biosorption data for Cd(II), Pb(II) and Cu(II) ions were in good agreement with those calculated by the Langmuir model.     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

耐铅镉菌株的分离鉴定及其吸附能力

堆肥中添加生物钝化剂是当前降低粪便中重金属生物毒性最为有效的方式之一,为了进一步提高其钝化重金属的能力,文中获得了复合重金属高耐性的钝化剂菌株,并探究其生物学特性和吸附特征。采集猪粪堆肥样品并在改良的牛肉膏培养基中分离和筛选耐铅又耐镉的高耐性菌株,通过形态结合分子生物学鉴定该菌株。该菌株分别在不同pH、温度和盐浓度条件下培养获得其最适的生长条件,进而在该条件下分析其对铅镉吸附的特性。结果获得一株耐铅浓度为600 mg/L、镉浓度为120 mg/L的铅镉复合耐性菌株SC19,该菌株为西地西菌属,其最适生长环境为pH值7.0、温度37℃、盐浓度0.5%。培养36 h的稳定期SC19菌株在吸附时间30min时铅的去除率最高,对铅的最大去除率和吸附量分别为60.7%和329.13mg/g;培养8h的对数期在吸附时间30min时镉的去除率最高,对镉的最大去除率和吸附量分别为51.0%和126.19 mg/g。红外光谱分析显示,SC19菌株对铅镉离子的吸附主要是细胞表面的多种活性基团与金属离子发生络合作用。该研究揭示了SC19菌株有较好的二价态铅镉离子吸附能力,可为生物钝化重金属提供重要的微生物种质资源。     

Cadmium biosorption by <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic"> circulans</Emphasis> strain EB1

Summary A heavy metal resistant bacterium, Bacillus circulans strain EB1 showed a high cadmium biosorption capacity coupled with a high tolerance to this metal when grown in its presence. Bacillus circulans EB1 cells grown in the presence of 28.1 mg cadmium/l were capable of removing cadmium with a specific biosorption capacity of 5.8 mg Cd/g dry wt biomass in the first 8 h. When the cells were pre-conditioned with low concentrations of cadmium in pre-grown medium, the uptake was increased to 6.7 mg Cd/g dry wt biomass. The maximum uptake of␣cadmium was during mid-logarithmic phase of growth. The resting cells (both wet and dry) of EB1 were also able to biosorb cadmium. Specific biosorption capacities of wet and dry biomass were 9.8 and 26.5 mg Cd/g dry wt biomass, respectively. Maximum cadmium removals by both wet and dry cells were at pH 7.0. The results showed that the cadmium removal capacity of resting cells was markedly higher than that of growing cells. Since both growing and resting cells had a high biosorption capacity for cadmium, EB1 cells could serve as an excellent biosorbent for removal of cadmium from natural environments.     

Biosorption of heavy metals by lyophilized cells of <Emphasis Type="Italic">Pseudomonas stutzeri</Emphasis>

Biosorptive capacity of Pb(II), Cd(II) and Cu(II) by lyophilized cells of Pseudomonas stutzeri was investigated based on Langmuir and Freundlich isotherms. Biosorptive capacity for Pb(II), Cd(II) and Cu(II) decreased with an increase of metal concentration, reaching 142, 43.5 and 36.2 mg/g at initial concentration of 300 mg/l, respectively. Biosorption capacity for metal ions increased with increasing pH. The optimum pH for biosorption rate of Cd(II) and Cu(II) were 5.0, and 6.0 for Pb(II) biosorption. The experimental data showed a better fit with the Langmuir model over the Freundlich model for metal ions throughout the range of initial concentrations. The maximum sorptive capacity (q _max) obtained from the Langmuir equation for Pb(II), Cd(II) and Cu(II) were 153.3 (r ²  = 0.998), 43.86 (r ²  = 0.995), and 33.16 (r ²  = 0.997) for metal ions, respectively. The selectivity order for metal ions towards the biomass of P. stutzeri was Pb(II) > Cd(II) > Cu(II) for a given initial metal ions concentration. The interactions between heavy metals and functional groups on the cell wall surface of bacterial biomass were confirmed by FTIR analysis. The results of this study indicate the possible removal of heavy metals from the environment by using lyophilized cells of P. stutzeri.     

Biosorption of Heavy Metals from Wastewater by Biosolids

In a study where the removal of heavy metals from wastewater is the primary aim, the biosorption of heavy metals onto biosolids prepared as Pseudomonas aeruginosa immobilized onto granular activated carbon was investigated in batch and column systems. In the batch system, adsorption equilibriums of heavy metals were reached between 20 and 50 min, and the optimal dosage of biosolids was 0.3 g/L. The biosorption efficiencies were 84, 80, 79, 59 and 42 % for Cr(VI), Ni(II), Cu(II), Zn(II) and Cd(II) ions, respectively. The rate constants of biosorption and pore diffusion of heavy metals were 0.013–0.089 min^–1 and 0.026–0.690 min^–0.5. In the column systems, the biosorption efficiencies for all heavy metals increased up to 81–100 %. The affinity of biosorption for various metal ions towards biosolids was decreased in the order: Cr = Ni > Cu > Zn > Cd.     

Cadmium biosorption properties of the metal‐resistant Ochrobactrum cytisi Azn6.2

The aim of this work was to establish the conditions for using Ochrobactrum cytisi Azn6.2 as a metal biosorbent. Azn6.2 is a novel strain from the legume symbiont O. cytisi that has been isolated from nodules of Medicago polymorpha plants grown on heavy metal‐polluted soils. Compared with the strain ESC1, Azn6.2 showed some biochemical differences, as well as antibiotic susceptibility, Azn6.2 was multi‐resistant to heavy metals, such as Cu, Cd and Zn, and bacterial pellets were able to biosorb high amounts of Cd and Zn. As shown by scanning electron microscopy coupled to energy dispersive X‐ray, most of Cd was attached to the cell surface. Optimal conditions for Cd biosorption were established, being 1 mM Cd ions in solution and 2 h of contact with the biosorbent at room temperature. At these conditions, maximal Cd loading capacity reached 32–34 mg/g. Cd desorption from bacterial pellets was achieved after washing with EDTA or, at higher efficiency, at pH 1.0. These results indicated that biosorption/desorption on O. cytisi Azn6.2 biomass should be a cost‐effective method for Cd recovery from contaminated solutions.     

Kinetic study of ferrous sulphate oxidation of Acidithiobacillus ferrooxidans in the presence of heavy metal ions

Acidophilic microorganisms such as Acidithiobacillus ferrooxidans have the capability to carry out processes of bioleaching, biosorption and bioprecipitation of heavy metal ions, which have important environmental applications. At. ferrooxidans derives the energy for their metabolism from ferrous iron oxidation, process, which can be affected by the presence of heavy metals in the medium. Moreover, organic matter produces an inhibitory effect over the ferrous iron oxidation of At. ferrooxidans. In this work, heterotrophic bacterium Acidiphilium sp. was added when the medium is supplemented with organic matter to reduce this negative effect. The purpose of this work is the kinetic study of ferrous sulphate oxidation by At. ferrooxidans in the presence of different concentrations of several heavy metal ions (Cr(III), Cu(II), Cd(II), Zn(II) and Ni(II)) and compare this kinetic behaviour with a mixed culture with Acidiphilium sp.The obtained results show a non-competitive inhibition of heavy metals over bacterial oxidation of ferrous sulphate. In accordance with this kind of inhibition, a kinetic equation has been proposed to predict the behaviour of At. ferrooxidans in the presence of heavy metals in the range of concentrations studied.     

Bio-removal of cadmium by growing deep-sea bacterium Pseudoalteromonas sp. SCSE709-6

Effective bio-removal of heavy metals is important for water treatment. Although a number of microorganism species demonstrated the ability of living cells to remove cadmium, most of them were tested at fixed concentration of metals, salinity, and temperature. This paper reported a research on the screening and performance of a newly developed deep-sea bacterium, Pseudoalteromonas sp. SCSE709-6, for Cd(II) removal by growing cells under a range of experimental conditions: 0–50 mg/L of Cd(II), 15–30 °C of incubation temperatures, 6.5–8.0 of initial pH, and 1.5–5.0 % of salinity. Study results revealed that Pseudoalteromonas sp. SCSE709-6 could remove more than 96 % of Cd(II) on growth. The Cd(II) bioremoval was in correlation but not in accordance with biomass. As cadmium concentrations increased, the Cd(II) removal by cell adsorption played an increasingly important role compared with that of intracellular accumulation. For the removal mechanism, Fourier transform infrared spectroscopy revealed that carboxyl, amido and hydroxyl of saccharides, and proteins in the extracellular polymeric substances are the most active groups for Cd(II) absorption. The bacterium reported in this study offers a new microbe strain for Cd(II) bioremediation.     

Interaction of Heavy Metals in Multimetal Biosorption by Galerina vittiformis from Soil

ABSTRACT Soil heavy metal contamination, a major threat due to industrialization, can be tackled by an efficient and economical process called bioremediation. Mushrooms are employed to accumulate heavy metals from soil due to their high metal accumulation potential and better adaptability. The bioaccumulation potential of Galerina vittiformis was already reported for individual metals. At natural conditions, since soil consists of more than one polluting metal, more focus has to be given to multimetal systems. In this study, multimetal accumulation potential was analyzed using central composite design, and the responses obtained were analyzed using response surface methodology. Heavy metals such as Cu(II), Cd(II), Cr(VI), Pb(II), and Zn(II) were subjected to biosorption at 10–250 mg/kg concentrations along with pH 5–8. The results showed that the preference of the organism for the five metals under study was in the order Pb(II) > Zn(II) > Cd(II) > Cu(II) > Cr(VI) at pH 6.5 under multimetal condition. The study also indicates that the metal interaction pattern in multimetal interaction is a property of their ionic radii. The response surface methodology clearly explains the effect of interaction of heavy metals on the accumulation potential of the organism using three-dimensional response plots. The present work suggests that the fungus Galerina vittiformis could be employed as a low-cost metal removal agent from heavy metal–polluted soil.     

Equilibrium and kinetics studies of heavy metal ions biosorption on green algae waste biomass

The biosorption of Pb(II), Cd(II), and Co(II), respectively, from aqueous solution on green algae waste biomass was investigated. The green algae waste biomass was obtained from marine green algae after extraction of oil, and was used as low-cost biosorbent. Batch shaking experiments were performed to examine the effects of initial solution pH, contact time and temperature. The equilibrium biosorption data were analyzed using two isotherm models (Langmuir and Freundlich) and two kinetics models (pseudo-first order and pseudo-second order). The results indicate that Langmuir model provide best correlation of experimental data, and the pseudo-second order kinetic equation could best describe the biosorption kinetics of considered heavy metals.     

Biosorption of heavy metals by the exopolysaccharide produced by <Emphasis Type="Italic">Paenibacillus jamilae</Emphasis>

The biosorption of several toxic heavy metals (Pb, Cd, Co, Ni, Zn and Cu) by the exopolysaccharide (EPS) produced by Paenibacillus jamilae, a potential biosorbent for metal remediation and recovery was studied. Firstly, the biochemical composition of this bacterial polymer was determined. Glucose was the most abundant neutral sugar, followed by galactose, rhamnose, fucose and mannose. The polymer presented a high content of uronic acids (28.29%), which may serve as binding sites for divalent cations. The presence of carboxylic groups was also detected by infrared spectroscopy. The EPS presented an interesting affinity for Pb in comparison with the other five metals. Lead biosorption (303.03 mg g⁻¹) was tenfold higher (in terms of mg of metal adsorbed per gram of EPS) than the biosorption of the rest of metals. Biosorption kinetics, the effect of pH and the effect of competitive biosorption were determined. Finally, we found that the EPS was able to precipitate Fe(III), but the EPS-metal precipitate did not form with Fe(II), Pb(II), Cd(II), Co(II), Ni(II), Cu(II) and Zn(II).     

Biosorption of heavy metals from aqueous solutions with tobacco dust

A typical lignocellulosic agricultural residue, namely tobacco dust, was investigated for its heavy metal binding efficiency. The tobacco dust exhibited a strong capacity for heavy metals, such as Pb(II), Cu(II), Cd(II), Zn(II) and Ni(II), with respective equilibrium loadings of 39.6, 36.0, 29.6, 25.1 and 24.5 mg of metal per g of sorbent. Moreover, the heavy metals loaded onto the biosorbent could be released easily with a dilute HCl solution. Zeta potential and surface acidity measurements showed that the tobacco dust was negatively charged over a wide pH range (pH > 2), with a strong surface acidity and a high OH⁻ adsorption capacity. Changes in the surface morphology of the tobacco dust as visualized by atomic force microscopy suggested that the sorption of heavy metal ions on the tobacco could be associated with changes in the surface properties of the dust particles. These surface changes appeared to have resulted from a loss of some of the structures on the surface of the particles, owing to leaching in the acid metal ion solution. However, Fourier transform infrared spectroscopy (FTIR) showed no substantial change in the chemical structure of the tobacco dust subjected to biosorption. The heavy metal uptake by the tobacco dust may be interpreted as metal–H ion exchange or metal ion surface complexation adsorption or both.     

An assessment of the toxicity of metals to Pseudomonas aeruginosa PU21 (Rip64)

The toxicity of Co(II), Mn(II), Cd(II), and Zn(II) for Pseudomonas aeruginosa PU21, a Hg(II)-hyperresistant strain containing the mercury resistance mer operon, was determined. The metal tolerance of PU21 was strongly influenced by environmental conditions (e.g., existing metal, medium composition). Dose-response analysis on chronic and acute toxicity (e.g., EC(20), median effective dose EC(50), and slope factor B) of divalent cobalt, manganese, cadmium, and zinc cations in LB medium amended with citric acid phosphate buffered saline (CAPBS) suggested a toxicity series of Co > Mn approximately Zn > Cd for EC(50). In contrast, excluding the likely precipitate of Zn(II), the toxicity ranking in phosphate-buffered saline (PBS)-amended LB medium was Co > Cd > Mn. The metal toxicity in PBS, irrespective of metals, was greater than that in CAPBS. This might be attributed to the presence of citric acid in CAPBS as a chelating ligand donating electrons to hold free metals (e.g., Cd(2+), Zn(2+) tetrahedral ML(4) complex). The toxicity assessment established viable operation ranges (ca. 相似文献   

Spontaneous Cr(VI) and Cd(II) biosorption potential of native pinnae tissue of Pteris vittata L., a tropical invasive pteridophyte

Heavy metal pollution is a prevalent and critical environmental concern. Its rampancy is attributed to indiscriminate anthropogenic activities. Several technologies including biosorption have been continuously researched upon to overcome the limitations of the conventional method of treatments in removal of heavy metals. Biosorption technology involves the application of a biomass in its nonliving form. Pteris vittata L., a pteridophyte, considered as an invasive weed was investigated in the present study as a potential decontaminant of toxic metals, Cr(VI) and Cd(II). The adsorption capacity of the biosorbent for Cr(VI) and Cd(II) under equilibrium conditions was investigated. The morphology, elemental composition, functional groups, and thermal stability of the biosorbent before and after metal loading were evaluated. At 303?K and an equilibrium time of 120?min, the maximum loading of Cr(VI) on the biosorbent was estimated to be 166.7?mg/g at pH 2 and Cd(II) to be 31.3?mg/g at pH 6. Isotherm models, kinetic studies, and thermodynamic studies indicated the mechanisms, chemisorption, ion exchange and intraparticle diffusion, controlling the Cr(VI) and Cd(II) uptake, respectively. The interactive effect of multi-metal ions in binary component systems was synergistic for Cd(II) uptake. The results validate the toxic metal removal potency of the biosorbent.     

Pollution characteristics and risk assessment of heavy metals in the soil of a construction waste landfill site

Heavy metals found in construction waste can enter soil and water bodies through surface runoff and leachate, where they represent an environmental hazard. In this study, we investigate the pollution characteristics and ecological risks of eight heavy metals (Cd, Cr, Cu, Mn, Ni, Pb, Zn, and As) in the soils of an unofficial construction waste landfill site in Beijing, China. The results indicate that long-term disposal of construction waste in the dry riverbed can reduce the pH value of the soil, increase the soil organic carbon content, and affect the total amount and distribution of heavy metals. Moreover, the landfill site pollutes the external soil environment, with Cd, Zn, Pb, and Cu as the characteristic pollutants. According to the Nemerow comprehensive pollution index and potential ecological risk assessment, heavy metal pollution decreases in the following order: internal soil > bottom soil > boundary soil. Cd, Zn, Pb, and Cu pollution is higher in the internal region, with single heavy-metal pollution indexes (Pi) of 1.41, 1.65, 1.26, and 1.28, respectively. Conversely, the Pi for Cr is higher in boundary and bottom soils (1.91 and 1.94, respectively). Risk assessment codes indicate that Cd and Mn pose the greatest environmental risk (31.9% and 17.8%, respectively) as they have the highest effective content, bioavailability, and mobility. Thus, environmental monitoring is a necessity for these metals.     

南京市14种绿化树种对空气中重金属的累积能力

分析了南京化工厂（污染区）和江苏省林科院（对照区）不同绿化树种叶片重金属元素（Pb、Cd和Cu）的含量,揭示了14种绿化树种对3种重金属污染物的累积能力。结果表明,城市绿化树种对大气重金属污染物具有一定的吸收净化能力,并依重金属和树种的不同具有明显差异;同种植物对不同重金属的累积量也有很大差别,其中对Cu的累积量最高;采样区植物叶片重金属含量明显高于对照区;对Pb累积量高的树种有：杨树、广玉兰、女贞和紫叶李; Cd累积量高的树种为杨树;Cu累积量高的树种为构树;累积3种重金属综合能力最强的树种有杨树、构树、雪松、广玉兰、悬铃木、栾树。     

酵母菌对重金属离子吸附的研究

以６属３３株酵母菌的活菌或死菌对重金属离子Ｃｕ２＋、Ｃｄ２＋和Ｎｉ２＋进行了吸附能力的初步研究。结果显示∶吸附时间、吸附温度、溶液的ｐＨ、共存离子和菌体的生理状态对吸附作用都有明显的影响。在优化组合后发现一株假丝酵母菌对三种重金属离子的吸附比为Ｃｄ２＋＞Ｃｕ２＋＞Ｎｉ２＋,每克活菌体吸附量分别为１７．２３ｍｇ＞１０．５７ｍｇ＞３．２ｍｇ。干菌体对三种重金属的吸附量较明显的低于活菌体的吸附量。     

Potential capacity of Beauveria bassiana and Metarhizium anisopliae in the biosorption of Cd2+ and Pb2+

In this study Beauveria bassiana and Metarhizium anisopliae were used as inexpensive and efficient biosorbents for Pb(II) and Cd(II) from aqueous metal solutions. The effects of various physicochemical factors on Pb(II) and Cd(II) biosorption by B. bassiana and M. anisopliae were studied. The optimum pH for Cd(II) and Pb(II) biosorption by two fungal species was achieved at pH 6.0 for Pb(II) and 5.0 Cd(II) at a constant time of 30 min. The nature of fungal biomass and metal ion interactions was evaluated by Fourier transform infrared. The maximum adsorption capacities (q(max)) calculated from Langmuir isotherms for Pb(II), and Cd(II) uptake by B. bassiana were 83.33±0.85, and 46.27±0.12 mg/g, respectively. However, the q(max) obtained for Pb(II) uptake by M. anisopliae was 66.66±0.28 mg/g, and 44.22±0.13 mg/g for Cd(II). B. bassiana showed higher adsorption capacity compared to M. anisopliae. The data obtained imply the potential role of B. bassiana and M. anisopliae for heavy metal removal from aqueous solutions.     

Evaluation of a new peat-based sorbent for metals capture

A new peat-based sorbent was evaluated for the capture of heavy metals from waste streams. The media is a pelletted blend of organic humic material targeted for the capture of soluble metals from industrial waste streams and stormwater. The metals chosen for the media evaluation were Cd, Cu, Ni, and Zn due to their occurrence and abundance in waste streams and runoff. Sorption tests included an evaluation of the rate and extent of metals capture by the media, single versus multicomponent metals uptake, pH, anion influence, leaching effects and the effect of media moisture content on uptake rate and capacity. Isotherms of the sorption results showed that the presence of multiple metals increased the total sorption capacity of the media compared to the single component metal capacity; a result of site selectivity within the media. However the capacity for an individual metal in a multicomponent metal matrix was reduced compared to its single component capacity, due to competition for sites. Evidence of ion exchange behavior was observed but did not account for all metals capture. The media also provided a buffering action to counter the pH drop typically associated with metals capture.