Mitigation of ammonia,nitrous oxide and methane emissions from manure management chains: a meta‐analysis and integrated assessment

Livestock manure contributes considerably to global emissions of ammonia (NH₃) and greenhouse gases (GHG), especially methane (CH₄) and nitrous oxide (N₂O). Various measures have been developed to mitigate these emissions, but most of these focus on one specific gas and/or emission source. Here, we present a meta‐analysis and integrated assessment of the effects of mitigation measures on NH₃, CH₄ and (direct and indirect) N₂O emissions from the whole manure management chain. We analysed the effects of mitigation technologies on NH₃, CH₄ and N₂O emissions from individual sources statistically using results of 126 published studies. Whole‐chain effects on NH₃ and GHG emissions were assessed through scenario analysis. Significant NH₃ reduction efficiencies were observed for (i) housing via lowering the dietary crude protein (CP) content (24–65%, compared to the reference situation), for (ii) external slurry storages via acidification (83%) and covers of straw (78%) or artificial films (98%), for (iii) solid manure storages via compaction and covering (61%, compared to composting), and for (iv) manure application through band spreading (55%, compared to surface application), incorporation (70%) and injection (80%). Acidification decreased CH₄ emissions from stored slurry by 87%. Significant increases in N₂O emissions were found for straw‐covered slurry storages (by two orders of magnitude) and manure injection (by 26–199%). These side‐effects of straw covers and slurry injection on N₂O emission were relatively small when considering the total GHG emissions from the manure chain. Lowering the CP content of feed and acidifying slurry are strategies that consistently reduce NH₃ and GHG emissions in the whole chain. Other strategies may reduce emissions of a specific gas or emissions source, by which there is a risk of unwanted trade‐offs in the manure management chain. Proper farm‐scale combinations of mitigation measures are important to minimize impacts of livestock production on global emissions of NH₃ and GHG.     

Two-phase olive mill waste composting: enhancement of the composting rate and compost quality by grape stalks addition

Two-phase olive mill waste (TPOMW) is a semisolid sludge generated by the olive oil industry. Its recycling as a soil amendment, either unprocessed or composted, is being promoted as a beneficial agricultural practice in the Mediterranean area. One of the major difficulties when composting TPOMW is the compaction of the material due to its dough-like texture, which leads to an inadequate aeration. For this reason, the addition of bulking agents is particularly important to attain a proper composting process. In this study we followed the evolution of two composting mixtures (A and B) prepared by mixing equal amounts of TPOMW and sheep litter (SL) (in a dry weight basis). In pile B grape stalks (GS) were added (10% dry weight) as bulking agent to study their effect on the development of the composting process and the final compost quality. The incorporation of grape stalks to the composting mixture changed the organic matter (OM) degradation dynamics and notably reduced the total amount of lixiviates. The evolution of several maturation indices (C/N, germination index, water soluble carbon, humification indices, C/N in the leachates) showed a faster and improved composting process when GS were added. Moreover, chemical (NH₄ ⁺, NO₃ ⁻, cation exchange capacity, macro and micronutrients, heavy metals) and physical properties (bulk and real densities, air content, total water holding capacity, porosity) of the final composts were analysed and confirmed the superior quality of the compost where GS were added.     

Influence of straw types and nitrogen sources on mushroom composting emissions and compost productivity

The effects of different straw types and organic and inorganic nitrogen (N) sources on the chemical composition and odor concentration (OC) of mushroom composting emissions, compost parameters, and mushroom yield were examined using bench-scale and large-scale (windrows and aerated tunnels) composting systems. There were close correlations between the butanol or combined H₂S+dimethyl sulfide (DMS) concentration and OC of air samples taken from different composting ingredients (r=0.83 and 0.76–0.87, P<0.01, for log_e-transformed data). Differences in N availability, in terms of NH₃ and N losses during composting, were found between different N sources. Materials in which the N was less available (chipboard and digester wastes, cocoa shells, ammonium sulfate) produced lower mushroom yields than materials in which the N was more readily available (poultry manure, urea, brewers' grains, hop and molasses wastes, cocoa meal). Replacement of poultry manure with the other N sources at 50–100% or wheat straw with rape, bean, or linseed straw in aerated tunnel or windrow composts reduced the OC and emissions of odorous sulfur-containing compounds, but also reduced yield. Urea and cocoa meal may be suitable for “low odor” prewetting of straw, with addition of poultry manure immediately before aerated tunnel composting. Rape straw in compost reduces the formation of anaerobic zones and resulting odorous emissions, since it maintains its structure and porosity better than wheat straw. Journal of Industrial Microbiology & Biotechnology (2002) 29, 99–110 doi:10.1038/sj.jim.7000292 Received 08 January 2002/ Accepted in revised form 20 June 2002     

Evaluation of “alperujo” composting based on organic matter degradation, humification and compost quality

The main by-product generated by the Spanish olive oil industry, a wet solid lignocellulosic material called "alperujo" (AL), was evaluated as a composting substrate by using different aeration strategies and bulking agents. The experiments showed that composting performance was mainly influenced by the type of bulking agent added, and by the number of mechanical turnings. The bulking agents tested in this study were cotton waste, grape stalk, a fresh cow bedding and olive leaf; the latter showed the worse performance. Forced ventilation alone was revealed to work inadequately in most of the experiments. The composting process involved a substantial degradation of the organic substrate with average losses of 48.4, 28.6, 53.7 and 57.0% for total organic matter, lignin, cellulose and hemicellulose, respectively. Both organic matter biodegradation and humification were greatly influenced by the lignocellulosic nature of the starting material, which led to low organic matter and nitrogen loss rates and a progressive increase in more humified substances, as revealed by the end-values of the humification indices. The resulting composts were of good quality in terms of nutrient content, stabilised and non-phytotoxic organic matter and low heavy metal content. This demonstrates that composting technology can be used as an alternative treatment method to turn AL into compost that can be used as organic amendments or fertilisers for agricultural systems.     

Application of Bacillus sp. TAT105 to reduce ammonia emissions during pilot-scale composting of swine manure

Thermophilic ammonium-tolerant bacterium Bacillus sp. TAT105 grows and reduces ammonia (NH₃) emissions by assimilating ammonium nitrogen during composting of swine feces. To evaluate the efficacy of a biological additive containing TAT105 at reducing NH₃ emissions, composting tests of swine manure on a pilot scale (1.8 m³) were conducted. In the TAT105-added treatment, NH₃ emissions and nitrogen loss were lower than those in the control treatment without TAT105. No significant difference was detected in losses in the weight and volatile solids between the treatments. Concentration of thermophilic ammonium-tolerant bacteria in the compost increased in both treatments at the initial stage of composting. In the TAT105-added treatment, bacterial concentration reached ~10⁹ colony-forming units per gram of dry matter, several-fold higher than that in the control and stayed at the same level until the end. These results suggest that TAT105 grows during composting and reduces NH₃ emissions in TAT105-added treatment.     

Effect of carbon source on compost nitrogen and carbon losses

The effect of C source on N losses by volatilization during composting was measured using four bulking agents, each at three humidity levels and composted in duplicate under passive and active aeration. The bulking agents were pine shavings alone and corrected with soybean, chopped grass hay alone and corrected with urea, long (unchopped) wheat straw and chopped oat straw. The readily available C of each bulking agent was determined by analyzing for BOD5. In 105 l laboratory vessels, the bulking agents were mixed with liquid swine manure and tap water for a C/N of 20 and three humidity levels of 60%, 65% and 70%. While being aerated actively or passively, the mixtures were composted for 21 days. Their initial and final C and N contents were measured to conduct a mass balance analysis and calculate C and N losses. C and N losses were compared to bulking agent BOD5. N losses were compared to C losses. The humidity level and aeration regime had no effect on C and N losses but the N losses were correlated to C losses and only the C losses could be correlated to the BOD5 of the bulking agent. Thus, the N losses are related not only to the availability of C but also to the extent of composting. A relationship established between N and C losses indicated that 85% of the initial total N of the compost was available for microbial degradation and that 70% of the available C was lost as CO2 during the immobilization process.     

Influence of diet and manure management on ammonia and greenhouse gas emissions from dairy barns

Dairy systems are a source of pollutant emissions, such as greenhouse gases (GHG) and NH₃ that are associated with impacts on the environment. Gas emissions in barns are related mainly to diet intake and chemical composition, N excretion and manure management. A reduction in dietary N is known to be an effective way to reduce N excretion and the resulting NH₃ emissions. However, most studies consider manure in liquid form with frequent removal from the barn. In deep litter systems, several processes can occur during the accumulation of solid manure that result in variable gas emissions. The objective of this experiment was to investigate the influence of the interaction between dietary CP (low or high) and manure management (liquid or solid) on gas emissions (NH₃, N₂O, CH₄) at the barn level. Dietary treatments provided either low (LowN; 12% CP) or high (HighN; 18% CP) degradable protein to modify the amount of total ammonia nitrogen (TAN) excreted. The cows were housed for two 8-week periods in two mechanically ventilated rooms equipped to manage manure either in liquid (LM; slurry) or solid form (SM; deep litter). In the LM treatment, N balance was measured for 4 days. As expected, animals fed the LowN diet ingested 35% less N and excreted 65% less N in their urine, with no reduction in faecal N excretion and N secretion in milk. On the LowN diet, excretion of urea-N and NH₃-N emissions were reduced regardless of the manure management. On the HighN diet, urinary urea-N excretion was three times as high, while NH₃-N emissions were 3.0 and 4.5 times as high in LM and SM, respectively. Manure management strongly influenced CH₄-C emissions, which were 30% higher in SM than in LM, due to the accumulation of litter. Moreover, gas emissions from solid manure increased over the accumulation period, except for NH₃ on the LowN diet. Finally, our results suggest that methods used for national inventories would become more accurate by considering the variability in TAN excretion, which is the primary factor that influences NH₃ emissions.     

Life-cycle greenhouse gas inventory analysis of household waste management and food waste reduction activities in Kyoto, Japan

Purpose

Source-separated collection of food waste has been reported to reduce the amount of household waste in several cities including Kyoto, Japan. Food waste can be reduced by various activities including preventing edible food loss, draining moisture, and home composting. These activities have different potentials for greenhouse gas (GHG) reduction. Therefore, we conducted a life-cycle inventory analysis of household waste management scenarios for Kyoto with a special emphasis on food waste reduction activities.

Methods

The primary functional unit of our study was ??annual management of household combustible waste in Kyoto, Japan.?? Although some life-cycle assessment scenarios included food waste reduction measures, all of the scenarios had an identical secondary functional unit, ??annual food ingestion (mass and composition) by the residents of Kyoto, Japan.?? We analyzed a typical incineration scenario (Inc) and two anaerobic digestion (dry thermophilic facilities) scenarios involving either source-separated collection (SepBio) or nonseparated collection followed by mechanical sorting (MecBio). We assumed that the biogas from anaerobic digestion was used for power generation. In addition, to evaluate the effects of waste reduction combined with separate collection, three food waste reduction cases were considered in the SepBio scenario: (1) preventing loss of edible food (PrevLoss); (2) draining moisture contents (ReducDrain); and (3) home composting (ReducHcom). In these three cases, we assumed that the household waste was reduced by 5%.

Results and discussion

The GHG emissions from the Inc, MecBio, and SepBio scenarios were 123.3, 119.5, and 118.6 Gg CO₂-eq/year, respectively. Compared with the SepBio scenario without food waste reduction, the PrevLoss and ReducDrain cases reduced the GHG emissions by 17.1 and 0.5 Gg CO₂-eq/year. In contrast, the ReducHcom case increased the GHG emissions by 2.1 Gg CO₂-eq/year. This is because the biogas power production decreased due to the reduction in food waste, while the electricity consumption increased in response to home composting. Sensitivity analyses revealed that a reduction of only 1% of the household waste by food loss prevention has the same GHG reduction effect as a 31-point increase (from 50% to 81%) in the food waste separation rate.

Conclusions

We found that prevention of food losses enhanced by separate collection led to a significant reduction in GHG emissions. These findings will be useful in future studies designed to develop strategies for further reductions in GHG emissions.     

The application of an life cycle inventory (LCI) model for solid waste disposal systems in malaysia

This paper discusses the application of an LCt model for solid waste management systems in Malaysia. The model was used to analyze the environmental and economic impacts of municipal waste management systems in Malaysia. In the first part of the study, the LCI model was adapted to analyze waste management systems of four selected cities: Kuala Lumpur and Penang to represent urban areas; Seremban to represent moderately urban areas and Muar to represent rural areas. The results have shown that Kuala Lumpur and Penang had greater Global Warming Potential (GWP) and the costs spent on the solid waste management were also higher as compared to that in suburban areas. In the second part of the study, a detailed evaluation was carried out by analyzing the implication of introducing incineration and composting into the solid waste management system, and the results were compared with the current system, i.e. 100 % landfilled. The relative GWP was lower for incineration, but the cost was extremely high. The results also showed that the final solid waste to be disposed to landfills and the impact due to water emissions could be reduced significantly when incineration and composting were introduced.     

Relating Quinone Profile to the Aerobic Biodegradation in Thermophilic Composting Processes of Cattle Manure with Various Bulking Agents

Summary Cattle manure was composted aerobically with various bulking agents (rice straw, vermiculite, sawdust or waste paper) at a constant incubation temperature of 60 °C. Increased quinone content (IQC) was used to assess microbial biomass in the composted material. IQC was proportional to mass reduction (MR) (R = 0.812) and cumulative O₂ consumption (COC) (R = 0.810) irrespective of the bulking agent used, indicating that the yield of quinone was constant. Quinone yields were 0.44 ± 0.03 μmol quinone/g MR and 0.34 ± 0.02 μmol quinone/g COC. The material that was decomposed by microorganisms was considered to be mainly cattle manure. Bulking agents were not degraded within the 14 day trial period and did not affect microbial succession because composting runs with various bulking agents exhibited similar quinone yields.     

The impact of landfilling and composting on greenhouse gas emissions – A review

Municipal solid waste is a significant contributor to greenhouse gas emissions through decomposition and life-cycle activities processes. The majority of these emissions are a result of landfilling, which remains the primary waste disposal strategy internationally. As a result, countries have been incorporating alternative forms of waste management strategies such as energy recovery from landfill gas capture, aerobic landfilling (aerox landfills), pre-composting of waste prior to landfilling, landfill capping and composting of the organic fraction of municipal solid waste. As the changing global climate has been one of the major environmental challenges facing the world today, there is an increasing need to understand the impact of waste management on greenhouse gas emissions. This review paper serves to provide an overview on the impact of landfilling (and its various alternatives) and composting on greenhouse gas emissions taking into account streamlined life cycle activities and the decomposition process. The review suggests greenhouse gas emissions from waste decomposition are considerably higher for landfills than composting. However, mixed results were found for greenhouse gas emissions for landfill and composting operational activities. Nonetheless, in general, net greenhouse gas emissions for landfills tend to be higher than that for composting facilities.     

Compost convective airflow under passive aeration

For composting, passive aeration can save energy costs while being just as efficient as forced or active aeration. Passive aeration requires the proper design of aeration ducts, and thus, the proper prediction of the convective airflow rates created by the temperature differential between the compost and the ambient air. To establish such relationship, the temperature and convective air flow regimes of composts were investigated using three bulking agents (wood shavings, hay and straw), each at three moisture contents (MC-60%, 65% and 70%) spanning the normal values. All bulking agent and aeration treatments were aerated in duplicate under passive and active regimes. Laboratory vessels of 105 L were used for all treatments. Passive aeration treatments produced temperatures above 57 degrees C, as did the treatments actively aerated at 4 mg of air s(-1) kg(-1) of initial dry compost material. Compost MC had an effect only on the peak compost temperature, occurring between day 2 and 6. After 6 days of composting, MC no longer had any effect on temperature regime because of the loss of moisture by each mixture. A relationship was established between the Grasholf number (Gr-ratio of buoyancy to viscous forces) and the convective airflow rates, to size the aeration ducts for passive aeration. In general, convective airflow rates ranged from 1.5 to 0.7 mg of dry air s(-1) kg(-1) of initial compost dry matter, from day 0 to day 20, respectively, and for all compost treatments. This airflow rate sizes the aeration ducts installed under compost piles for passive aeration. As compared to straw where airflow rate dropped over a given level of Gr, wood shavings and hay were found to be more effective as bulking agents, as their airflow rate increased constantly with Gr.     

The European carbon balance. Part 4: integration of carbon and other trace‐gas fluxes

Overviewing the European carbon (C), greenhouse gas (GHG), and non‐GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr^?1, and fossil fuel imports are 1.6 Pg yr^?1. GPP is about 1.25% of solar radiation, containing about 360 × 10¹⁸ J energy – five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100‐year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N₂O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO‐N, 70% of total N₂O‐N, and 95% of total NH₃‐N emissions of Europe. European soils are a net C sink (114 Tg yr^?1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO₂ C‐equivalent yr^?1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non‐GHGs (NH₃, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr^?1. Nevertheless, for the European trace‐gas balance, land‐use intensity is more important than land‐use change. This study shows that emissions of GHGs and non‐GHGs significantly distort the C cycle and eliminate apparent C sinks.     

Effect of improved nitrogen management on greenhouse gas emissions from intensive dairy systems in the Netherlands

Dairy systems in Europe contribute to the emissions of the greenhouse gases (GHGs) nitrous oxide (N₂O), methane (CH₄) and carbon dioxide (CO₂). In this paper, the effects of improved nitrogen (N) management on GHG emissions from Dutch dairy farms are determined. The GHG emissions are calculated using the panel on climate change (IPCC) methodology for the Netherlands, an updated and refined IPCC methodology, and a full accounting approach. The changes in dairy farming over the last 20 years, and the consequences for N management are described using detailed farm‐level data, collected in 1985, 1997 and 2002. The selected years represent distinct stages in the implementation of N policies. The changes in N management have reduced the GHG emissions. A reduction of the N surplus per kilogram milk with 1 g N reduced the GHG emissions per kilogram milk with approximately 29 g CO₂‐equivalents. The reduction of the N surpluses was mainly brought about by reduced fertilizer use and reduced grazing time. The use of updated and refined emission factors resulted in higher CH₄ emissions and lower N₂O emissions. On average, the overall emission was 36% higher with the refined method. Full accounting, including all direct and indirect emissions of CH₄, N₂O and CO₂, increased the emission with 36% compared with the refined IPCC methodology. We conclude that the N surplus at farm level is a useful indicator of GHG emissions. A full accounting system as presented in this study may effectively enable farmers to address the issue of emissions of GHGs in their operational management decisions. Both approaches serve their own specific objectives: full accounting at the farm level to explore mitigation options, and the IPCC methods to report changes in GHG emissions at the national level.     

Sludge stabilization by composting: a Jordanian case study

Municipal sludge handling is a major problem facing wastewater treatment plants due to the high costs of treatment and disposal. This issue is of special importance in Jordan because of the critical economic situation as well as the lack of financial support for such nonprofit projects. This study investigates the possibility of solving this problem by testing a method of sludge stabilization that requires minimum initial and operating costs. The method tested here is sludge stabilization by composting which is an attempt to transform sludge into a safe, nuisance free, humus like product that can be applied safely to land and can become a source of income that would recover the costs of processing. Two types of composting systems were tested in this study, aerated static pile and windrow. Results obtained indicate that composting of dried sludge was not possible due to the extremely low moisture content; which was overcome by sludge seeding and mixing with amendment and bulking agents. This resulted in efficient stabilization and reduction of the amount of organic matter in the final compost. The experimental results obtained also indicate that both systems (aerated static pile and windrow) are efficient. The organic content of the sludge was reduced in the windrow system by 46% and in the aerated static pile by 66%. In addition, the total volatile solids had decreased in the windrow and the aerated pile by 26 and 73%, respectively. The heavy metals content of the final compost was examined and found to comply with the international standards.     

The study of the aerobic bacterial microbiota and the biotoxicity in various samples of olive mill wastewaters (alpechin) during their composting process

Five different piles were prepared by mixing olive mill wastewater (alpechin) and alpechin sludge with two bulking agents (cotton waste and maize straw) and two organic wastes with high content of nitrogen (sewage sludge and poultry manure), which were composted by the Rutgers static pile composting system in a pilot plant. The aim of this work was to study the evolution of total nitrogen and different forms of organic matter and evaluate the variation in the aerobic bacterial microbiota present and biotoxicity during the composting process.In piles prepared with alpechin, the use of the maize straw as a bulking agent reduced the nitrogen losses whereas the use of sewage sludge, instead of poultry manure, with cotton waste originated the highest degradation of organic matter. In piles prepared with alpechin sludge a similar evolution of the composting process was observed. There were not great variations during composting in the aerobic bacterial microbiota present in the mixtures. However, the pile prepared with alpechin sludge and maize straw was only one to present bacteria capable of growing in alpechin, and the toxicity study showed that this was only present in the starting mixtures.     

Comparison of static,in-vessel composting of MSW with thermophilic anaerobic digestion and combinations of the two processes

The biological stabilisation of the organic fraction of municipal solid waste (OFMSW) into a form stable enough for land application can be achieved via aerobic or anaerobic treatments. To investigate the rates of degradation (e.g. via electron equivalents removed, or via carbon emitted) of aerobic and anaerobic treatment, OFMSW samples were exposed to computer controlled laboratory-scale aerobic (static in-vessel composting), and anaerobic (thermophilic anaerobic digestion with liquor recycle) treatment individually and in combination. A comparison of the degradation rates, based on electron flow revealed that provided a suitable inoculum was used, anaerobic digestion was the faster of the two waste conversion process. In addition to faster maximum substrate oxidation rates, anaerobic digestion (followed by post-treatment aerobic maturation), when compared to static composting alone, converted a larger fraction of the organics to gaseous end-products (CO₂ and CH₄), leading to improved end-product stability and maturity, as measured by compost self-heating and root elongation tests, respectively. While not comparable to windrow and other mixed, highly aerated compost systems, our results show that in the thermophilic, in-vessel treatment investigated here, the inclusion of a anaerobic phase, rather than using composting alone, improved hydrolysis rates as well as oxidation rates and product stability. The combination of the two methods, as used in the DiCOM^® process, was also tested allowing heat generation to thermophilic operating temperature, biogas recovery and a low odour stable end-product within 19 days of operation.     

Simultaneous quantification of N2, NH3 and N2O emissions from a flooded paddy field under different N fertilization regimes

Gaseous nitrogen (N) emissions, especially emissions of dinitrogen (N₂) and ammonia (NH₃), have long been considered as the major pathways of N loss from flooded rice paddies. However, no studies have simultaneously evaluated the overall response of gaseous N losses to improved N fertilization practices due to the difficulties to directly measure N₂ emissions from paddy soils. We simultaneously quantified emissions of N₂ (using membrane inlet mass spectrometry), NH₃ and nitrous oxide (N₂O) from a flooded paddy field in southern China over an entire rice‐growing season. Our field experiment included three treatments: a control treatment (no N addition) and two N fertilizer (220 kg N/ha) application methods, the traditional surface application of N fertilizer and the incorporation of N fertilizer into the soil. Our results show that over the rice‐growing season, the cumulative gaseous N losses from the surface application treatment accounted for 13.5% (N₂), 19.1% (NH₃), 0.2% (N₂O) and 32.8% (total gaseous N loss) of the applied N fertilizer. Compared with the surface application treatment, the incorporation of N fertilizer into the soil decreased the emissions of NH₃, N₂ and N₂O by 14.2%, 13.3% and 42.5%, respectively. Overall, the incorporation of N fertilizer into the soil significantly reduced the total gaseous N loss by 13.8%, improved the fertilizer N use efficiency by 14.4%, increased the rice yield by 13.9% and reduced the gaseous N loss intensity (gaseous N loss/rice yield) by 24.3%. Our results indicate that the incorporation of N fertilizer into the soil is an effective agricultural management practice in ensuring food security and environmental sustainability in flooded paddy ecosystems.     

Characterization of compost produced from separated pig manure and a variety of bulking agents at low initial C/N ratios

The aim of this study was to investigate the composting of separated pig manure solids with or without a variety of bulking agents at a low initial C/N ratio (12.5-23.3). Compost stability was investigated using an oxygen uptake rate (OUR) test and compost maturity was investigated using a germination index test. All treatments showed typical patterns of compost temperature. Temperatures above 60 °C were achieved by Day 2, followed by a thermophilic phase (50-60 °C), which lasted for 1 to 2 weeks followed by a cooling phase. The stability of one of treatments which did not contain any bulking agent - OUR of 25 mmol O₂ kg⁻¹ OM hour⁻¹ - was negatively affected by its initial high water content (69%). The addition of a bulking agent and initial water content below 60% were necessary to compost the separated solid fraction of pig manure at a low initial C/N ratio.     

Life cycle environmental and economic impact of a food waste recycling-farming system: a case study of organic vegetable farming in Japan

Purpose

Bio-based recycling systems and agricultural production using recycled materials are often evaluated separately. This study performs an environmental and socio-economic life cycle assessment (LCA) of a food waste treatment and spinach farming system in Japan. The environmental and economic tradeoffs of introducing a recycling system and the net environmental benefit of the substitution of market fertilizer considering operation changes are also examined.

Methods

Three scenarios were developed and compared. In the conventional (CV) scenario, food waste is collected, incinerated, and disposed of in landfill, and the farmer uses market organic fertilizer. The on-site composting (OC) scenario processes food waste using an on-site garbage disposer and transports compost to a nearby spinach farmer. Food waste in the centralized composting (CC) scenario is transported to a centralized composting facility and resultant compost is sent to the farm. Primary data were obtained from field experiments and interviews. Non-greenhouse gas (GHG) emissions from the field and nitrogen leaching to water systems were simulated using the denitrification–decomposition (DNDC) model.

The environmental LCA targeted climate change, eutrophication, and waste landfill. An input–output analysis estimated socio-economic indicators, namely gross added value and employment inducement effect.

Results and discussion

The scenario with the lowest impact is the CC scenario. Climate change and eutrophication impacts are highest in the OC scenario and waste landfill impacts are most significant in the CV scenario. The weighted impact by LIME2 can be reduced by 47% in the CC scenario and 17% in the OC scenario due to the recycling of food waste instead of dumping in the landfill. The difference in socio-economic indicators between the scenarios was relatively small, although the CV scenario encouraged more employment. The substitution effect of composting, as well as the environmental impact reduction of replacing market organic fertilizer with compost, will result in 28.7% of the avoided impacts in GHG emissions.

Conclusions

Both composting scenarios are feasible from an environmental and socio-economic perspective when compared with conventional organic production, although there is a tradeoff between waste landfill and GHG emissions for the on-site composting system. However, the OC scenario needs to save electricity to improve its environmental competitiveness with the CV scenario. When considering the substitution effect of composting, it is recommended to take into account that agricultural operation also changes.