The Functional Width of the Dentino-Enamel Junction Determined by AFM-Based Nanoscratching

The dentino-enamel junction (DEJ) constitutes a structurally unique interphase uniting two mineralized tissues with very different matrix composition and physical properties. Its excellent biomechanical properties have drawn interest as a biomimetic model for joining dissimilar materials. In order to characterize the functional width of the DEJ, nanoscratching experiments were performed on human third molars. Friction coefficients of enamel, of dentin, and at the DEJ were obtained with a nanoscratch tester attached to an atomic force microscope (AFM). Normal loads in the range of 50 to 600 microN were applied to a spherical diamond indenter (r = 10 microm), which was driven 10 microm across the sample surface, recording the lateral force. Imaging with an AFM facilitated exact positioning of the scratches. The friction coefficient of intertubular dentin was 0.31 +/- 0.05, significantly above the coefficient of enamel of 0.14 +/- 0.02. The increased friction of dentin is attributed to the higher content of organic phases. Scratches performed across the interphase between enamel and dentin showed a sharp monotonic change in the friction coefficient. The average width of the slope between the friction coefficients of dentin and enamel was 2.0 +/- 1.1 microm and is assumed to represent the functional width of the dentino-enamel junction. The effect of the scalloped structure of the DEJ on its functional width as determined by mechanical testing is discussed.     

Unravelling the Functional Biomechanics of Dental Features and Tooth Wear

Most of the morphological features recognized in hominin teeth, particularly the topography of the occlusal surface, are generally interpreted as an evolutionary functional adaptation for mechanical food processing. In this respect, we can also expect that the general architecture of a tooth reflects a response to withstand the high stresses produced during masticatory loadings. Here we use an engineering approach, finite element analysis (FEA), with an advanced loading concept derived from individual occlusal wear information to evaluate whether some dental traits usually found in hominin and extant great ape molars, such as the trigonid crest, the entoconid-hypoconulid crest and the protostylid have important biomechanical implications. For this purpose, FEA was applied to 3D digital models of three Gorilla gorilla lower second molars (M₂) differing in wear stages. Our results show that in unworn and slightly worn M₂s tensile stresses concentrate in the grooves of the occlusal surface. In such condition, the trigonid and the entoconid-hypoconulid crests act to reinforce the crown locally against stresses produced along the mesiodistal groove. Similarly, the protostylid is shaped like a buttress to suffer the high tensile stresses concentrated in the deep buccal groove. These dental traits are less functional in the worn M₂, because tensile stresses decrease physiologically in the crown with progressing wear due to the enlargement of antagonistic contact areas and changes in loading direction from oblique to nearly parallel direction to the dental axis. This suggests that the wear process might have a crucial influence in the evolution and structural adaptation of molars enabling to endure bite stresses and reduce tooth failure throughout the lifetime of an individual.     

Load transmission in the nasofrontal suture of the pig, Sus scrofa

The nasofrontal suture links the nasal complex with the braincase and is subject to compressive strain during mastication and (theoretically) tensile strain during growth of nasal soft tissues. The suture's ability to transmit compressive and tensile loads therefore affects both cranioskeletal stress distribution and growth. This study investigated the in vitro viscoelastic and failure properties of the nasofrontal suture in the pig, Sus scrofa. Suture specimens from two ages were tested in compression and tension and at fast and slow rates. In additional specimens, strain gauges were applied to the suture and nasal bone for strain measurement during testing. Relaxation testing demonstrated higher elastic moduli in tension than compression, regardless of test rate or pig age. In contrast, maximum elastic moduli from failure tests, as well as peak stresses, were significantly higher in compression than in tension. Sutures from older pigs tended to have higher elastic moduli and peak stresses, significantly so for tensile relaxation moduli. Strain gauge results showed that deformation at the suture was much greater than that of the nasal bone. These data demonstrate the viscoelasticity and deformability of the nasofrontal sutural ligament. The suture achieved maximal resistance to tensile deformation at low loads, corresponding with the low tensile loads likely to occur during growth of nasal soft tissues. In contrast, the maximal stiffness in compression at high loads indicates that the suture functions with a substantial safety factor during mastication.     

Effect of prism orientation and loading direction on contact stresses in prismatic enamel of primates: implications for interpreting wear patterns

The ability of prisms to effectively dissipate contact stress at the surface will influence wear rates in teeth. The aim of this investigation was to begin to quantify the effect of prism orientation on surface stresses. Seven finite element models of enamel microstructure were created, each model differing in the angulation of prism orientation with regard to the wear surface. For validation purposes, the mechanical behavior of the model was compared with published experimental data. In order to test the enamel under lateral loads, a compressed food particle was dragged across the surface from the dentino-enamel junction (DEJ) towards the outer enamel surface (OES). Under these conditions, tensile stresses in the enamel model increased with increases in the coefficient of friction. More importantly, stresses were found to be lowest in models in which the prisms approach the surface at lower angles (i.e., more obliquely cut prisms), and highest when the prisms approached the surface at 60 degrees (i.e., less obliquely cut). Finally, the direction of travel of the simulated food particle was reversed, allowing comparison of the difference in behavior between trailing and leading edge enamels (i.e., when the food particle was dragged either towards or away from the DEJ). Stresses at the trailing edge were usually lower than stresses at the leading edge. Taken together with what is known about prism orientation in primate teeth, such findings imply greater wear resistance at the intercuspal region and less wear resistance at the lateral enamel at midcrown. Such findings appear to be supported by archeological evidence.     

Spatio-temporal patterns in the mortality of bay scallop recruits in North Carolina: investigation of a life history anomaly

By timing reproduction to occur when predatory mortality on progeny is minimal, organisms may maximize recruitment to adult populations. Accordingly, an hypothesis to explain the greater importance of fall than spring spawning to North Carolina populations of bay scallops (Argopecten irradians) is that predatory mortality of bay scallop recruits is lower in fall and winter than spring and summer. To test this hypothesis, we measured predatory mortality of scallop recruits monthly. To infer the identities of predators that are most important in determining patterns of mortality of bay scallop recruits in spring and in fall, predatory mortality of bay scallop recruits was compared between the edge and interior of sheltered and exposed seagrass patches during the day and at night in May and November. Consideration of predatory mortality throughout the year indicated that mortality of scallop recruits over late spring and summer approaches 100% but is negligible over late fall and winter. In May, predatory mortality of scallop recruits was similar during day and night but greater at exposed than sheltered sites. In November, predatory mortality was greater during night than day and slightly greater at sheltered than exposed sites. In neither month did position within patch influence mortality, and at all times and places, missing and crushed scallops contributed a higher proportion than drilled scallops to the total dead. These spatio-temporal patterns of mortality of scallop recruits suggest that mud crabs, Dyspanopeus sayi, which are more abundant in exposed than sheltered seagrass beds during spring and can feed by day and night, are a likely major contributor to spatio-temporal pattern in mortality of scallop recruits in North Carolina. Blue crabs, Callinectes sapidus, which are many times more abundant in summer than winter, may also contribute to observed seasonal patterns in mortality. The dramatically lower rates of predation on bay scallops over the winter months appear to provide fall settlers with a temporal window of opportunity to recruit to the adult population. Although spring spawning contributes little to adult populations in most years because of high rates of predatory mortality during summer, we hypothesize that spring spawning persists because infrequent devastating perturbations, such as hurricanes and red tides, can result in complete failure of fall recruitment.     

Prey selection and the functional response of sea stars (Asterias vulgaris Verrill) and rock crabs (Cancer irroratus Say) preying on juvenile sea scallops (Placopecten magellanicus (Gmelin)) and blue mussels (Mytilus edulis Linnaeus)

Predators in nature include an array of prey types in their diet, and often select certain types over others. We examined (i) prey selection by sea stars (Asterias vulgaris) and rock crabs (Cancer irroratus) when offered two prey types, juvenile sea scallops (Placopecten magellanicus) and blue mussels (Mytilus edulis), and (ii) the effect of prey density on predation, prey selection, and component behaviours. We quantified predation rates, behavioural components (proportion of time spent searching for prey, encounter probabilities) and various prey characteristics (shell strength, energy content per prey, handling time per prey) to identify mechanisms underlying predation patterns and to assess the contribution of active and passive prey selection to observed selection of prey. Sea stars strongly selected mussels over scallops, resulting from both active and passive selection. Active selection was associated with the probability of attack upon encounter; it was higher on mussels than on scallops. The probability of capture upon attack, associated with passive selection, was higher for mussels than for scallops, since mussels can not swim to escape predators. Sea stars consumed few scallops when mussels were present, and so did not have a functional response on scallops (the target prey). Rock crabs exhibited prey switching: they selected mussels when scallop density was very low, did not select a certain prey type when scallop density was intermediate, and selected scallops when scallop density was high relative to mussel density. The interplay between encounter rate (associated with passive selection) and probability of consumption upon capture (associated with both active and passive selection) explained observed selection by crabs. Scallops were encountered by crabs relatively more often and/or mussels less often than expected from random movements of animals at all scallop densities. However, the probability of consumption varied with scallop density: it was lower for scallops than mussels at low and intermediate scallop densities, but tended to be higher for scallops than mussels at high scallop densities. When mussels were absent, crabs did not have a functional response on scallops, but rather were at the plateau of the response. When mussels were present with scallops at relatively low density, crabs exhibited a type II functional response on scallops. Our results have implications for the provision of protective refuges for species of interest (i.e., scallops) released onto the sea bed, such as in population enhancement operations and bottom aquaculture.     

Effects of sponge and barnacle encrustation on survival of the scallop <Emphasis Type="Italic">Chlamys hastata</Emphasis>

The scallop Chlamys hastata frequently carries epibionts such as sponges and barnacles on its shells. Although the scallop-sponge relationship has been characterized as a mutualism, little is known about the scallop-barnacle relationship. This study investigated the effects of sponge and barnacle encrustation on the ability of C. hastata to avoid predation by the sea star Pycnopodia helianthoides. In feeding trials, P. helianthoides caught and consumed significantly more barnacle-encrusted scallops (7.7 ± 0.8 out of 20 scallops) than scallops encrusted by either of the sponges Myxilla incrustans (4.1 ± 0.9) or Mycale adhaerens (3.0 ± 0.5). Epibiont-free scallops (5.7 ± 0.5) formed an intermediate treatment between barnacle-encrusted and sponge-encrusted scallops. Possible mechanisms by which the sponges protected the scallops were investigated in two ways: two feeding trials were videotaped to allow qualitative analysis of sea star and scallop behavior and sea star feeding responses to scallop and sponge homogenates were determined to investigate if sea stars accept scallops and sponges as prey. Sea stars displayed positive feeding responses to scallop puree 97.5% ± 1.6 of the time while only displaying positive responses to Mycale adhaerens homogenate 4.4% ± 2.0 of the time and to Myxilla incrustans homogenate 4.4% ± 2.9 of the time. The videotaped feeding trials indicated that interference with tube feet adhesion by the sponge deterred predation. Observations of both sea stars that were videotaped showed that neither avoided trying to capture sponge-encrusted scallops, and at no time was a captured scallop willingly released by the sea stars. Thus, it appears that sponges provide tactile-mechanical protection and possibly chemical or tactile camouflage in this predator/prey relationship. Finally, the effects of sponge encrustation on barnacle settlement were determined. Field experiments showed that barnacle larvae settled more frequently on epibiont-free scallops than on those with either of the two sponges, potentially protecting the scallops from an epibiont that increases the scallop’s susceptibility to predation. Handling editor: K. Martens     

Effects of substrate on interactions between juvenile sea scallops (Placopecten magellanicus Gmelin) and predatory sea stars (Asterias vulgaris Verrill) and rock crabs (Cancer irroratus Say)

We investigated the effect of substrate (glass bottom, sand, granule, pebble) on predation of juvenile sea scallops (Placopecten magellanicus) by sea stars (Asterias vulgaris) and rock crabs (Cancer irroratus) at two prey sizes (11-15 mm and 24-28 mm shell height), and two prey densities (10 and 30 scallops per aquarium) in laboratory experiments. Specifically, we quantified predation rate and underlying behaviours (proportion of time a predator spent searching for and handling prey, encounter rate between predators and prey, and various outcomes of encounters). We detected a significant gradual effect of particle size of natural substrates on sea star predation: specifically, predation rate on and encounter rate with small scallops tended to decrease with increasing particle size (being highest for sand, intermediate for granule, and lowest for pebble). Substrate type did not significantly affect predation rates or behaviours of sea stars preying on large scallops or of rock crabs preying on either scallop size classes. Other factors, such as prey size and density, were important in the scallop-sea star and scallop-rock crab systems. For example, predation rate by sea stars and crabs and certain sea star behaviours (e.g. probability of consuming scallops upon capture) were significantly higher with small scallops than with large scallops. As well, in interactions between small scallops and sea stars, predation rate and encounter rate increased with prey density, and the proportion of time sea stars spent searching was higher at low prey density than high prey density. Thus, substrate type may be a minor factor determining predation risk of seeded scallops during enhancement operations; prey size and prey density may play a more important role. However, substrate type still needs to be considered when choosing a site for scallop enhancement, as it may affect other scallop behaviours (such as movement).     

Changes in oxidative stress parameters in relation to age, growth and reproduction in the short-lived catarina scallop Argopecten ventricosus reared in its natural environment

Increase in oxidative damage and decrease in cellular maintenance is often associated with aging, but, in marine ectotherms, both processes are also strongly influenced by somatic growth, maturation and reproduction. In this study, we used a single cohort of the short-lived catarina scallop Argopecten ventricosus, to investigate the effects of somatic growth, reproduction and aging on oxidative damage parameters (protein carbonyls, TBARS and lipofuscin) and cellular maintenance mechanisms (antioxidant activity and apoptosis) in scallops, caged in their natural environment. The concentrations of protein carbonyls and TBARS increased steeply during the early period of fast growth and during reproduction in one-year-old scallops. However, oxidative damage was transient, and apoptotic cell death played a pivotal role in eliminating damage in gill, mantle and muscle tissues of young scallops. Animals were able to reproduce again in the second year, but the reduced intensity of apoptosis impaired subsequent removal of damaged cells. In late survivors low antioxidant capacity and apoptotic activity together with a fast accumulation of the age pigment lipofuscin was observed. Rates of oxygen consumption and oxidative stress markers were strongly dependent on somatic growth and reproductive state but not on temperature. Compared to longer-lived bivalves, A. ventricosus seems more susceptible to oxidative stress with higher tissue-specific protein carbonyl levels and fast accumulation of lipofuscin in animals surviving the second spawning. Superoxide dismutase activity and apoptotic cell death intensity were however higher in this short-lived scallop than in longer-lived bivalves. The life strategy of this short-lived and intensely predated scallop supports rapid somatic growth and fitness as well as early maturation at young age at the cost of fast cellular degradation in second year scallops.     

Role of biotic interactions on the growth of pre-recruitment and development of Pecten maximus (L.) in the Bay of Breast

Biotic interactions within benthic megafauna were studied from quantitative dredge samples to investigate their role in the persistence of low scallop, Pecten maximus, stocks in the Bay of Brest. The distributions of 148 species of the megafauna and of four age classes of Pecten maximus were sampled. Suspension feeders dominate all megabenthic assemblages within the bay. This domination can be related to Crepidula fornicata spreading in the bay; however, no direct competition for food between scallops and the slipper limpet (introduced species) has been observed. On the other hand, Crepidula spreading leads to major changes in sediment type (silting) in the bay owing to biodeposit production, and silting would be a major factor inducing the decrease in Pecten maximus distribution. Predation would not be limiting. Within 10 years, one may predict a strong decrease in the area colonized by scallops in the bay.     

紫扇贝与海湾扇贝通用SSR的检测及其在杂交子代鉴定中的应用

以紫扇贝DNA为模板,用已开发的147个海湾扇贝微卫星标记引物扩增,结果表明100个微卫星标记能成功扩增,其中有47个表现出多态性,等位基因数目从2到9不等.观测杂合度范围为0.128 0～1.000 0(平均0.660 4),期望杂合度范围为0.503 1～0.862 1(平均0.671 9),有6个位点偏离Hardy-Weinberg平衡(P<0.05).用7对引物分别对紫扇贝、海湾扇贝及其种间正反杂交F1各30个个体进行PCR扩增,发现它们可明确区分紫扇贝与海湾扇贝,且所检测60个杂交子代均同时含海湾扇贝与紫扇贝的相应种特异性条带,证明全部为种间杂交子代.将该7对引物的扩增产物克隆测序,发现这些位点在两种扇贝中的序列同源率为40.22%～91.95%,其中3个位点在紫扇贝中的扩增产物仍然含有微卫星.     

A short note on heavy cunjevoi growth observed on commercial scallops (Pecten fumatus)

ABSTRACT

Commercial scallops (Pecten fumatus) were collected from Bass Strait, Australia from 41 dredge tows. Of these, four dredges undertaken in February 2016 at 46 m depth returned scallops that were covered by ascidians of the Pyura stolonifera species complex, commonly known as cunjevoi. There were no obvious signs of immediate ill health in the scallops, with meat being assessed as normal quality and all scallops requiring force to separate the shells. Ascidian-encrusted scallops were significantly smaller, and previous tows in the same location ten and eight months earlier returned far fewer scallops with clean shells and no signs of ascidians. This suggests that both both scallop and ascidian recruitment and growth occurred during the period between sampling events. Future research combining laboratory experiments and field observations is recommended to understand this relationship and its potential impacts on scallop populations.     

Modeling the biomechanics of the mandible: a three-dimensional finite element study.

Three-dimensional finite element models of a partially edentulated human mandible were generated to calculate the mechanical response to simulated isometric biting and mastication loads. The level of mesh refinement was established via a convergence test and showed that a model with over 30,000 degrees of freedom was required to obtain analysis accuracy. The functional loading cases included muscle loading based on an algorithm that assigns muscle forces in accordance with muscle cross-sectional area, while maintaining static equilibrium. Results were found for isometric application of unilateral and bilateral bite and mastication loading, and two different sets of displacement boundary conditions were imposed at the condyles. The mechanical response is shown in terms of displacements, principal strains, and a new measure called the 'mechanical intensity scalar'. For each load case studied, there was substantial bending in the molar region of the corpus and high tensile strains in the anterior portion of the ramus.     

First record of Pseudomyicola spinosus in Argopecten ventricosus in Baja California, Mexico

This is the first record of the copepod Pseudomyicola spinosus in the scallop Argopecten ventricosus in northwestern Mexico, and describes: (1) the known annual prevalence and intensity of this copepod on scallops from culture sites (Gulf of California) and natural populations (Pacific coast), (2) the histopathological effects caused on the soft tissues of scallops, and (3) the relationship between prevalence and intensity records and environmental parameters. The copepod was present throughout the period of investigation, showing similar prevalence and ratio of copepod to scallop patterns in both cultured scallops and wild specimens from natural habitats. Highest prevalence and ratio values were detected in summer-autumn at both sites, probably because scallops showed a weak condition from the combined effects of spawning, reabsorption of residual gametes, and high temperature. The condition index of A. ventricosus showed a significant correlation with the presence of the copepod in Magdalena Bay (-0.67). P. spinosus was observed in the gills of scallops, producing alterations or rupture of filaments, and in the stomach, causing detachment and loss of the epithelium. No relationship between copepod infestation with temperature, salinity, chlorophyll, and seston were found during the investigation. Although P. spinosus was present year-round at both sites, no association between infestation and scallop mortalities was detected.     

A mathematical model for the mechanical properties of scallop shells

The mechanical behaviour of one or both shell valves of five species of pectinacean and one anomiacean was determined using strain gauge rosettes attached to the inner surfaces of the valves. A multiple linear regression analysis accounted for over 64% of the total vanance in tensile shell compliance. The important shell architectural variables were thickness, corrugation and, much less important, convexity and shell length. Calculation showed that in general corrugation of the shell was easily the cheapest way of producing stiffness, in terms of the amount of shell material required. Suggestions are offered as to why not all scallops are scalloped.     

Aquaculture of sponges on scallops for natural products research and antifouling

Suspended culture of scallops (Pectinidae: Bivalvia) is plagued by invertebrate fouling. Scallops covered in an orange sponge (Suberites ficus ssp. rubrus), however, do not have any other invertebrates fouling their shells and the sponge is easily removed. Sponges may also be valuable sources of bioactive compounds. Seven species of sponge were found to be associated with Chlamys opercularis but none were found associated with Pecten maximus. Standing crop of sponge on the scallop farm was just over one tonne. If all the scallops were covered by sponge this would rise to approximately 4.5 tonnes (from three million scallops). Primary cell cultures of (S.f. rubrus) were successfully established but no cell lines were achieved. A number of techniques were tried for establishing cells and pieces of sponge tissue onto scallop shells but none gave satisfactory results. Likewise mechanical methods for sticking small pieces of sponge to scallop shells were deemed impractical even where they resulted in subsequent sponge growth. Improving natural settlement of sponges onto the scallops was the only economically practical method for increasing sponge yield for C. opercularis, though other methods would need to be devised for P. maximus.     

Stress analysis of irradiated human tooth enamel using finite element methods

The objectives of this project were to use finite element methods to determine how changes in the elastic modulus due to oral cancer therapeutic radiation alter the distribution of mechanical stresses in teeth and to determine if observed failures in irradiated teeth correlate with changes in mechanical stresses. A thin slice section finite element (FE) model was constructed from micro CT sections of a molar tooth using MIMICS and 3-Matic software. This model divides the tooth into three enamel regions, the dentin-enamel junction (DEJ) and dentin. The enamel elastic modulus was determined in each region using nano indentation for three experimental groups namely – control (non-radiated), in vitro irradiated (simulated radiotherapy following tooth extraction) and in vivo irradiated (extracted subsequent to oral cancer patient radiotherapy) teeth. Physiological loads were applied to the tooth models at the buccal and lingual cusp regions for all three groups (control, in vitro and in vivo). The principal tensile stress and the maximum shear stress were used to compare the results from different groups since it has been observed in previous studies that delamination of enamel from the underlying dentin was one of the major reasons for the failure of teeth following therapeutic radiation. From the FE data, we observed an increase in the principal tensile stress within the inner enamel region of in vivo irradiated teeth (9.97 ± 1.32 MPa) as compared to control/non-irradiated teeth (8.44 ± 1.57 MPa). Our model predicts that failure occurs at the inner enamel/DEJ interface due to extremely high tensile and maximum shear stresses in in vivo irradiated teeth which could be a cause of enamel delamination due to radiotherapy.     

Molar occlusion and jaw mechanics of the Eocene primate Adapis

Wear facets on molars of the Eocene primate Adapis magnus are described. Striations on these wear facets indicate three separate directions of mandibular movement during mastication. One direction corresponds to a first stage of mastication involving orthal retraction of the mandible. The remaining two directions correspond to buccal and lingual phases of a second stage of mastication involving a transverse movement of the mandible. The mechanics of jaw adduction are analysed for both the orthal retraction and transverse stages of mastication. During the orthal retraction stage the greatest component of bite force is provided by the temporalis muscles acting directly against the food with the mandible functioning as a link rather than as a lever. A geometrical argument suggests that during the transverse stage of mastication bite force is provided by the temporalis muscles of both sides, the ipsilateral medial and lateral pterygoid muscles, and the contralateral masseter muscle.     

Catecholaminergic responses to environmental stress in the hemolymph of Zhikong scallop Chlamys farreri

Catecholamines have long been known to play essential roles in several physiological processes in invertebrates. In this study, enzyme immunoassays were used to examine the levels of catecholamines (including adrenaline (AD), noradrenaline (NA) and dopamine (DA)) in the hemolymph of the scallop, Chlamys farreri, in responses to selected environmental stress. These stressors include high temperature (acute transfer from 17 to 28 degrees C), low salinity (acute transfer from salinity 31 to 20 psu) and air exposure, which are commonly encountered in aquaculture practices or in their natural habitat. The results showed that both AD and NA concentrations increased significantly in response to all the stressors. The levels of these catecholamines peaked 72 hr after acute temperature or salinity stresses, and then decreased gradually. For scallops subjected to air exposure, the duration of AD concentration elevation depended on the exposure temperature with a higher air temperature resulting in a shorter time to return to control level. In contrast, the NA responses were long lasting and no obvious decreases were observed after reaching the peak value. Interestingly, the DA concentration showed an inverse trend in response to stresses compared with AD or NA. These results suggested that the catecholaminergic responses in bivalve hemolymph will provide useful references in predicting the success of aquaculture practices and monitoring the environmental stresses.