Food purchases: Impacts from the consumers’ point of view investigated with a modular LCA

The goal of this research work was to assist consumers in considering environmental aspects of food consumption. A simplified, modular LCA approach has been used to evaluate the impacts from the consumers’ point of view. Comparative LCA’s have been calculated for five single aspects of decisions: type of agricultural practice, origin, packaging material, type of preservation, and consumption. The inventory for one module includes the environmental impacts related to one particular product characteristic. The modular LCA allows one to investigate the trade-offs among different decision parameters. It could be shown that most of the decision parameters might have an influence on the overall impact of a vegetable product. Greenhouse production and vegetables transported by air cause the highest surplus environmental impact. For meat products, the agricultural production determines the overall environmental impact. The total impact for vegetable or meat purchases may vary by a factor of eight or two-and-a-half. Different suggestions for consumers have been ranked according to the variation of average impacts, due to a marginal change of behaviour. Avoiding air-transported food products leads to the highest decrease of environmental impacts.     

Dematerialization and the Circular Economy: Comparing Strategies to Reduce Material Impacts of the Consumer Electronic Product Ecosystem

The rapid technological evolution and adoption of consumer electronics highlights a growing need for adaptive methodologies to evaluate material consumption at the intersection of technological change and increasing consumption. While dematerialization and the circular economy (CE) have both been proposed to mitigate increasing material consumption, recent research has shown that these methods may be ineffective at achieving net material use reduction: When focused on specific products, these methods neglect the effects of complex interactions among and increasing consumption of consumer electronic products. The research presented here develops and applies a material flow analysis aimed at evaluating an entire “product ecosystem,” thereby including the effects of increasing consumption, product trade‐offs, and technological innovations. Results are then used to evaluate the potential efficacy of “natural” dematerialization (occurring as technology advances or smaller products substitute for larger ones) and CE (closing the loop between secondary material supply and primary material demand). Results show that material consumption by the ecosystem of electronics commonly used by U.S. households peaked in 2000. This consumption relies on increasingly diverse materials, including gold, cobalt, and indium, for whom secondary supply is still negligible, particularly given low recovery rates, often less than 1%. Potential circularity metrics of material “dilution,” “dispersion,” and “demand mismatch” are also evaluated, and indicate that CE approaches aimed at closing the loop on consumer electronic material still face several critical barriers particularly related to design and efficient recycling infrastructure.     

The effect of consumption and production policies on circular economy business models: A machine learning approach

The circular economy (CE) is attracting increasing interest, as it can bring environmental, social, and economic benefits. However, policymakers and scholars appear to concentrate more on the production side of CE, while consumption, and particularly policies that affect consumption have received less attention and their effect is ambiguous. This paper investigates the effect of CE consumption policies on circular economy business models (CEBMs) in firms, but also examines the interplay this type of policies have with CE production policies to have a broader picture of the circular economy policy framework and the relevance of each type of policy on firms. While previous studies assume rational and passive consumer behavior, this paper borrows from a natural resource-based view and stakeholder theory, arguing that consumers have a proactive attitude toward the consumption of environmentally friendly products. Moreover, we use institutional theory as an analytical framework for modeling the effects of a particular policy framework on the CEBM. Our analysis combines classical econometric methods with machine learning approaches, employing data from the EU. The results show that CE policies aimed at promoting consumption have a direct and positive effect on CEBMs. This paper also confirms that a wide portfolio of CE policies on production and consumption has a greater effect on the development of CEBMs, due to the complementarity of CE consumption and production policies. Moreover, we show that in interaction with CE production policies, CE policies on consumption have an even greater effect on CEBMs in firms than would have been anticipated.     

Environmental analysis of packaging‐derived changes in food production and consumer behavior

This study analyzed the environmental impacts of packaging‐derived changes in food production and consumer behavior to assist packaging designers in making environmentally conscious decisions. Packaging can be functionalized to prevent food loss and waste (FLW), for example, extending the expiration date and apportioning the package size, but it can generate additional environmental impacts from changes in food and packaging production. Previous studies assessed additional impacts from packaging production; however, the effects of packaging functionalization are yet to be connected with food production and consumer behavior. To examine the effect of functionalization on these aspects, we analyzed packaging‐derived changes in food production for milk and cabbage products. The case study compared products with functionalized packaging that permits a longer expiration date or a smaller portion size to their base‐case products. Our results showed that the packaging‐derived changes increased the global warming potential (GWP) of food production more than other processes did. Thus, changes in food production weakened the effectiveness of the packaging functionalization to decrease the GWP. Moreover, the analysis of consumer behavior scenarios showed that consumers’ perception of the expiration date decisively influences the effectiveness of packaging functionalization. When consumers discarded food after the expiration date, provided they consumed in small quantities, the packaging functionalization reduced FLW. From the scenario analysis, we identified appropriate combinations of packaging functionalization and consumer behaviors to effectively decrease total GWP. With our expanded analysis, packaging designers can understand the effectiveness of their decisions on the product life cycle in reducing FLW and environmental impacts.     

Gene transfer technology in aquaculture

The gene transfer technique, transgenesis, has permitted the transfer of genes from one organism to another to create new lineages of organisms with improvement in traits important to aquaculture. Genetically modified organisms (GMOs), therefore, hold promise for producing genetic improvements, such as enhanced growth rate, increased production and efficiency, disease resistance and expanded ecological ranges. The basic procedure to generate transgenic fish for aquaculture includes: (1) design and construction of transgenic DNA; (2) transfer of the gene construct into fish germ cells; (3) screening for transgenic fish; (4) determination of transgene expression and phenotype; (5) study of inheritance; and (6) selection of stable lines of transgenics.GMOs offer economic benefits, but also pose environmental threats. Optimising the mix of benefits and risks is of fundamental importance. The potential economic benefits of transgenic technology to aquaculture are obvious. Transgenic fish production has the goal of producing food for human consumption; thus the design of genetic constructs must take into consideration the potential risks to consumer health, as well as marketing strategies and product acceptance in the market.     

Towards a Circular Economy in Australian Agri‐food Industry: An Application of Input‐Output Oriented Approaches for Analyzing Resource Efficiency and Competitiveness Potential

The food industry in Australia (agriculture and manufacturing) plays a fundamental role in contributing to socioeconomic sectors nationally. However, alongside the benefits, the industry also produces environmental burdens associated with the production of food. Sectorally, agriculture is the largest consumer of water. Additionally, land degradation, greenhouse gas emissions, energy consumption, and waste generation are considered the main environmental impacts caused by the industry. The research project aims to evaluate the eco‐efficiency performance of various subsectors in the Australian agri‐food systems through the use of input‐output–oriented approaches of data envelopment analysis and material flow analysis. This helps in establishing environmental and economic indicators for the industry. The results have shown inefficiencies during the life cycle of food production in Australia. Following the principles of industrial ecology, the study recommends the implementation of sustainable processes to increase efficiency, diminish undesirable outputs, and decrease the use of nonrenewable inputs within the production cycle. Broadly, the research outcomes are useful to inform decision makers about the advantages of moving from a traditional linear system to a circular production system, where a sustainable and efficient circular economy could be created in the Australian food industry.     

Structural Decomposition Analysis of Raw Material Consumption

The aim of this article is to quantify the drivers for the changes in raw material consumption (domestic material consumption expressed in the form of all materials extracted and used in the production phase) in terms of technology, which refers to the concept of sustainable production; the product structure of final demand, which refers to the concept of sustainable consumption; and the volume of final demand, which is related to economic growth. We also aim to determine to what extent the technological development and a shift in product structure of the final demand compensate for the growth in final consumption volume. Therefore, we apply structural decomposition analysis (SDA) to the change in raw material consumption (RMC) of the Czech Republic between 2000 and 2007. To present the study in a broader context, we also show other material flow indicators for the Czech Republic for 2000 and 2007. Our findings of SDA show that final demand structure has a very limited effect on the change in material flows. The rapid change in final demand volume was not compensated for crude oil, metal ores, construction materials, food crops, and timber. For the material category of non‐iron metal ores, even the change in technology contributes to an increase in material flows. The largest relative increases are reported for non‐iron metal ores (38%) and construction materials (30%). The main changes in material flows related to the Czech Republic are driven by exports and enabled by imports, the main source of these increased material flows. This emphasizes the increasing role of international trade.     

From Energy to Environmental Analysis

Unsustainable private consumption causes energy and environmental problems. This occurs directly (resource depletion and emissions through using cars for transport) or indirectly (purchase of consumer goods and services for which the production uses energy and emits damaging gases). A hybrid energy analysis proved that indoor energy consumption, mobility, and vacations are the main consumer categories from an energy point of view. Although energy is often used as a proxy for environmental load from private consumption, there are other proxies like methane (CH₄), sulfur oxides (SO_x), and land use. This article describes the results of the extension of the hybrid energy analysis with energy and ten environmental stressors (CH₄, nitrous oxide [N₂O], nitrogen, phosphate, SO_x, nitrogen oxides [NO_x], ammonia [NH₃], nonmethane volatile organic compounds [NMVOCs], particulate matter [PM10], and land use), combined in five impact categories (global warming potential [GWP], acidification, eutrophication, summer smog, and land use). Household consumption was analyzed by dividing Dutch household expenditure into 368 consumer items in 11 categories. The results show that food impacts, in particular, are underestimated when only energy is taken into account. Food makes the highest contribution in three out of five impact categories when all ten stressors are taken into account. Within the food domain, meat and dairy consumer items have the highest environmental impact, about 45% of total food impact on average across all five impact categories. Looking in detail (368 consumer items), there are nine food items in the top ten most‐polluting items. Salad oil and cheese are the most polluting food items.     

Combining Material Flow Analysis,Life Cycle Assessment,and Multiattribute Utility Theory

Three assessment methods, material flow analysis (MFA), life cycle analysis (LCA), and multiattribute utility theory (MAUT) are systematically combined for supporting the choice of best end‐of‐life scenarios for polyethylene terephthalate (PET) waste in a municipality of a developing country. MFA analyzes the material and energy balance of a firm, a region, or a nation, identifying the most relevant processes; LCA evaluates multiple environmental impacts of a product or a service from cradle to grave; and MAUT allows for inclusion of other aspects along with the ecological ones in the assessment. We first systematically coupled MFA and LCA by defining “the service offered by the total PET used during one year in the region” as the functional unit. Inventory and impacts were calculated by multiplying MFA flows with LCA impacts per kilogram. We used MAUT to include social and economic aspects in the assessment. To integrate the subjective point of view of stakeholders in the MAUT, we normalized the environmental, social, and economic variables with respect to the magnitude of overall impacts or benefits in the country. The results show large benefits for recycling scenarios from all points of view and also provide information about waste treatment optimization. The combination of the three assessment methods offers a powerful integrative assessment of impacts and benefits. Further research should focus on data collection methods to easily determine relevant material flows. LCA impact factors specific to Colombia should be developed, as well as more reliable social indicators.     

Assessing the Replacement of Electrical Home Appliances for the Environment

To evaluate whether replacing an existing product with a new, more energy‐efficient product is environmentally preferable, we used an assessment approach based on life cycle assessment. With this approach, consumers can assess various replacement products, including products of different sizes or environmental performance in addition to consideration of various conditions of product use. The approach utilizes a diagram in which replacement conditions of products are compared with iso‐environmental‐load lines to determine the appropriateness of replacement. The approach also allows the assessment of energy and resource consumption and environmental impacts not only during the use stage, but also at other product stages. Iso‐environmental‐load lines to assess delayed replacement were also examined and derived. We then applied the approach in a case study of energy consumption by replacing three types of electric home appliances in Japan: TVs, air conditioners, and refrigerators. The results of assessment showed that replacing refrigerators after 8–10 years of use was preferable even if the replacement product was larger. The appropriateness of replacing TVs and air conditioners based on energy consumption depended on the replacement product and on the duration of daily use, and in several cases, delayed replacement was preferable. Replacement of air conditioners after 8–10 years of use was not preferable if the consumer already owned the most energy‐efficient product at the time of the purchase. The necessity of accounting for a variety of available replacement products was confirmed.     

Towards a global criteria based framework for the sustainability assessment of bioethanol supply chains: Application to the Swiss dilemma: Is local produced bioethanol more sustainable than bioethanol imported from Brazil?

Biofuels are considered as a promising substitute for fossil fuels when considering the possible reduction of greenhouse gases emissions. However limiting their impacts on potential benefits for reducing climate change is shortsighted. Global sustainability assessments are necessary to determine the sustainability of supply chains. We propose a new global criterion based framework enabling a comprehensive international comparison of bioethanol supply chains. The interest of this framework is that the selection of the sustainability indicators is qualified on three criterions: relevance, reliability and adaptability to the local context. Sustainability issues have been handled along environmental, social and economical issues. This new framework has been applied for a specific issue: from a Swiss perspective, is locally produced bioethanol in Switzerland more sustainable than imported from Brazil? Thanks to this framework integrating local context in its indicator definition, Brazilian production of bioethanol is shown as energy efficient and economically interesting for Brazil. From a strictly economic point of view, bioethanol production within Switzerland is not justified for Swiss consumption and questionable for the environmental issue. The social dimension is delicate to assess due to the lack of reliable data and is strongly linked to the agricultural policy in both countries. There is a need of establishing minimum sustainability criteria for imported bioethanol to avoid unwanted negative or leakage effects.     

Linking Material Flow Analysis with Environmental Impact Potential

Technology transition can have significant implications on the evolution of environmental impact potential of disposed electronics over time. Considering technology transition, we quantify the temporal behavior of ecological and human health impact potential from select heavy metals in electronic waste (e‐waste). The case study analyzes product substitution effects in two electronic cohorts from the U.S. market: (1) computers (laptops substituting for desktops) and (2) televisions (flat‐panel liquid crystal displays [LCDs] and plasma displays substituting for cathode‐ray tubes [CRTs]). Quantities of end‐of‐life (EoL) units to year 2030 are forecasted by the unique combination of dynamic material flow analysis, logistic trend analysis, and product lifespan calibration methods. Metal content from EoL units are assessed via a pathway and effect model using USETox? characterization factors to determine the toxicity potential attributed to heavy metal releases into different media (e.g., air, water, and soil) as an indicator of environmental burden. Results show high impact materials such as lead, nickel, and zinc cause changes in human health toxicity potential and copper causes changes in ecological toxicity potential. Effects of dematerialization, such as reduced metal content in laptops over desktops, provide some positive benefits in toxicity potential per product. However, from a market perspective, emerging e‐waste quantities created by increasing per capita penetration rates of electronics and increasing population will offset gains in environmental performance at the product level. The resulting analysis provides guidance on the timing expected for emerging EoL units and an indication of high impact potential materials requiring pollution prevention as product substitution occurs.     

Using anticipatory life cycle assessment to enable future sustainable construction

The built environment is the largest single emitter of CO₂ and an important consumer of energy. Much research has gone into the improved efficiency of building operation and construction products. Life Cycle Assessment (LCA) is commonly used to assess existing buildings or building products. Classic LCA, however, is not suited for evaluating the environmental performance of developing technologies. A new approach, anticipatory LCA (a‐LCA), promises various advantages and can be used as a design constraint during the product development stage. It helps overcome four challenges: (i) data availability, (ii) stakeholder inclusion, (iii) risk assessment, and (iv) multi‐criteria problems. This article's contribution to the line of research is twofold: first, it adapts the a‐LCA approach for construction‐specific purposes in theoretical terms for the four challenges. Second, it applies the method to an innovative prefabricated modular envelope system, the CleanTechBlock (CTB), focusing on challenge (i). Thirty‐six CTB designs are tested and compared to conventional walls. Inclusion of technology foresight is achieved through structured scenario analysis. Moreover, challenge (iv) is tackled through the analysis of different environmental impact categories, transport‐related impacts, and thickness of the wall assemblies of the CTB. The case study results show that optimized material choice and product design is needed to reach the lowest environmental impact. Methodological findings highlight the importance of context‐specific solutions and the need for benchmarking new products.     

Synergy Management Services Companies: A New Business Model for Industrial Park Operators

The concept of industrial symbiosis (IS) was introduced decades ago and its environmental and economic benefits are well established, but the broad acceptance of IS still faces significant barriers. This article provides a new approach to capture synergies within industrial parks by suggesting a new business model. Building on findings from a survey conducted by the authors and on literature, we first identify potential barriers to low‐carbon synergistic projects. Economic concerns of technically feasible synergies and financial issues turn out to be the largest barriers, because of long payback periods and fluctuating raw material and by‐product market prices. Existing business models do not offer easy ways to overcome or relax these barriers. We therefore introduce the concept of a synergy management services company (SMSCO), a synergy contractor and third‐party financing model, to overcome these barriers. This model shifts the financial risk of the synergistic project from collaborating firms to the SMSCO. We posit that this attribute of the SMSCO model makes it attractive for industrial park operators who seek long‐term solutions to secure future viability of their park.     

Policy support for biochar: Review and recommendations

Significant evidence has accumulated demonstrating that soil biochar amendment has many environmental benefits; however, adoption has been slow. This raises the question of how to align the environmental benefits with commercial motivations to drive more widespread implementation. Here, we examine the role that government policy can play in accelerating production and use at commercial scale. We identify three types of programs that can support biochar production: commercial financial incentives, nonfinancial policy support, and research and development funding. We also describe how these programs are currently used to support biochar production. For example, financial incentives can motivate immediate changes in business practices while nonfinancial policies can be important mechanisms to educate consumers and expand market demand. Research and development support can provide the necessary funding for early‐stage innovations that may one day become commercially viable options, even without other types of policy support. There are different risk–reward profiles for each policy mechanism, and these must be considered when evaluating a policy direction. Finally, we offer broad recommendations to the development of policy that maximizes the net benefits of biochar adoption. Key recommendations include improving policies that allow for the monetization of environmental benefits and avoided costs, recognizing soil as a resource through national preservation policy, and developing a broadly accepted set of product standards for biochar.     

Integrated Economic Equilibrium and Life Cycle Assessment Modeling for Policy‐based Consequential LCA

Consequential life cycle assessment (CLCA) has emerged as a tool for estimating environmental impacts of changes in product systems that go beyond physical relationships accounted for in attributional LCA (ALCA). This study builds on recent efforts to use more complex economic models for policy‐based CLCA. A partial market equilibrium (PME) model, called the U.S. Forest Products Module (USFPM), is combined with LCA to analyze an energy demand scenario in which wood use increases 400 million cubic meters in the United States for ethanol production. Several types of indirect economic and environmental impacts are identified and estimated using USFPM‐LCA. A key finding is that if wood use for biofuels increases to high levels and mill residue is used for biofuels and replaced by natural gas for heat and power in forest products mills, then the increased greenhouse gas emissions from natural gas could offset reductions obtained by substituting biofuels for gasoline. Such high levels of biofuel demand, however, appear to have relatively low environmental impacts across related forest product sectors.     

Biocatalysis in seawater: Investigating a halotolerant ω‐transaminase capable of converting furfural in a seawater reaction medium

The increasing demand for freshwater and the continued depletion of available resources has led to a deepening global water crisis. Significant water consumption required by many biotechnological processes contributes to both the environmental and economic cost of this problem. Relatively few biocatalytic processes have been developed to utilize the more abundant supply of seawater, with seawater composition and salinity limiting its use with many mesophilic enzymes. We recently reported a salt tolerant ω‐transaminase enzyme, Ad2‐TAm, isolated from the genome of a halophilic bacterium, Halomonas sp. CSM‐2, from a Triassic period salt mine. In this study we aimed to demonstrate its applicability to biocatalytic reactions carried out in a seawater‐based medium. Ad2‐TAm was examined for its ability to aminate the industrially relevant substrate, furfural, in both seawater and freshwater‐based reaction systems. Furfural was aminated with 53.6% conversion in a buffered seawater system, displaying improved function versus freshwater. Ad2‐TAm outperformed the commonly employed commercial ω‐TAms from Chromobacterium violaceum and Vibrio fluvialis, both of which showed decreased conversion in seawater. Given the increasingly precarious availability of global freshwater, such applications of enzymes from halophiles have the ability to reduce demand for freshwater in large‐scale industrial processes, delivering considerable environmental and economic benefits.     

Environmental Load from Dutch Private Consumption: How Much Damage Takes Place Abroad?

This article describes a method for determining the environmental load of Dutch private consumption. The method generates detailed information about consumption-related environmental impacts. The environmental load of households (direct) and production (indirect) was determined for 360 expenditure categories reported in the Dutch Expenditure Survey. The indirect environmental load was calculated with linked input-output tables covering worldwide production and trade. The environmental load per Euro turnover of industries was linked to consumer expenditures. With this method we can quantify several types of environmental load per expenditure category and per economic production region.
It was found that food production, room heating, and car use are the most important elements in the environmental load of Dutch private consumption. The impacts taking place abroad were—with the exception of emission of greenhouse gases and road traffic noise—found to be larger than domestic impacts. Most land use was found to take place in developing (non-OECD) countries, whereas most emissions occur in industrialized (OECD) countries.     

Material Recycling and the Myth of Landfill Diversion

Proponents of material recycling typically point to two environmental benefits: disposal (landfill/incinerator) reduction and primary production displacement. However, in this paper we mathematically demonstrate that, without displacement, recycling can delay but not prevent any existing end‐of‐life material from reaching final disposal. The only way to reduce the amount of material ultimately landfilled or incinerated is to produce less in the first place; material that is not made needs not be disposed. Recycling has the potential to reduce the amount of material reaching end of life solely by reducing primary production. Therefore, the “dual benefits” of recycling are in fact one, and the environmental benefit of material recycling rests in its potential to displace primary production. However, displacement of primary production from increased recycling is driven by market forces and is not guaranteed. Improperly assuming all recycled material avoids disposal underestimates the environmental impacts of the product system. We show that the potential magnitude of this error is substantial, though for inert recyclables it is lower than the error introduced by improperly assuming all recycled material displaces primary material production. We argue that life cycle assessment end‐of‐life models need to be updated so as not to overstate the benefits of recycling. Furthermore, scholars and policy makers should focus on finding and implementing ways to increase the displacement potential of recyclable materials rather than focusing on disposal diversion targets.     

Environmental Footprints and Scenario Analysis for Assessing the Impacts of the Agri‐Food Industry on a Regional Economy: A Case Study in Spain

The study of the environmental footprints of various sectors and industries is increasingly demanded by institutions and by society. In this context, the regional perspective is becoming particularly important, and even more so in countries such as Spain, where the autonomous communities have the primary responsibility for implementing measures to combat environmental degradation and promote sustainable development, in coordination with national strategies. Taking as a case study a Spanish region, Aragon, and significant economic sectors, including agriculture and the food industry, the aim of this work is twofold. First, we calculate the associated environmental footprints (of emissions and water) from the dual perspectives of production (local impacts) and consumption (final destination of the goods produced by the agri‐food industry). Second, through a scenarios analysis, based on a general equilibrium model designed and calibrated specifically for the region, we evaluate the environmental implications of changes in the agri‐food industry (changes in the export and import pattern, as well as in consumer behavior). This model provides a flexible approximation to the environmental impacts, controlling for a wider range of behavioral and economic interactions. Our results indicate that the agri‐food industry has a significant impact on the environment, especially on water resources, which must be responsibly managed in order to maintain the differential advantage that a regional economy can have, compared to other territories.