In situ mechanical properties of the chondrocyte cytoplasm and nucleus

The way in which the nucleus experiences mechanical forces has important implications for understanding mechanotransduction. Knowledge of nuclear material properties and, specifically, their relationship to the properties of the bulk cell can help determine if the nucleus directly experiences mechanical loads, or if it is a signal transduction mechanism secondary to cell membrane deformation that leads to altered gene expression. Prior work measuring nuclear material properties using micropipette aspiration suggests that the nucleus is substantially stiffer than the bulk cell [Guilak, F., Tedrow, J.R., Burgkart, R., 2000. Viscoelastic properties of the cell nucleus. Biochem. Biophys. Res. Commun. 269, 781–786], whereas recent work with unconfined compression of single chondrocytes showed a nearly one-to-one correlation between cellular and nuclear strains [Leipzig, N.D., Athanasiou, K.A., 2008. Static compression of single chondrocytes catabolically modifies single-cell gene expression. Biophys. J. 94, 2412–2422]. In this study, a linearly elastic finite element model of the cell with a nuclear inclusion was used to simulate the unconfined compression data. Cytoplasmic and nuclear stiffnesses were varied from 1 to 7 kPa for several combinations of cytoplasmic and nuclear Poisson's ratios. It was found that the experimental data were best fit when the ratio of cytoplasmic to nuclear stiffness was 1.4, and both cytoplasm and nucleus were modeled as incompressible. The cytoplasmic to nuclear stiffness ratio is significantly lower than prior reports for isolated nuclei. These results suggest that the nucleus may behave mechanically different in situ than when isolated.     

Influence of Micropatterning on Human Periodontal Ligament Cells’ Behavior

The periodontal ligament (PDL) is highly ordered connective tissue located between the alveolar bone and cementum. An aligned and organized architecture is required for its physiological function. We applied micropatterning technology to arrange PDL cells in 10- or 20-μm-wide extracellular protein patterns. Cell and nuclear morphology, cytoskeleton, proliferation, differentiation, and matrix metalloproteinase system expression were investigated. Micropatterning clearly elongated PDL cells with a low cell-shape index and low spreading area. The nucleus was also elongated as nuclear height increased, but the nuclear volume remained intact. The cytoskeleton was rearranged to form prominent bundles at cells’ peripheral regions. Moreover, proliferation was promoted by 10- and 20-μm micropatterning. Osteogenesis and adipogenesis were each inhibited, but micropatterning increased PDL cells’ stem cell markers. β-catenin was expelled to cytoplasm. YAP/TAZ nuclear localization and activity both decreased, which might indicate their role in micropatterning-regulated differentiation. Collagen Ι expression increased in micropatterned groups. It might be due to the decreased expression of matrix metalloproteinase-1, 2 and the tissue inhibitor of metalloproteinase-1 gene expression elevation in micropatterned groups. The findings of this study provide insight into the effects of a micropatterned surface on PDL cell behavior and may be applicable in periodontal tissue regeneration.     

Influence of Adhesion Force on icaA and cidA Gene Expression and Production of Matrix Components in Staphylococcus aureus Biofilms

The majority of human infections are caused by biofilms. The biofilm mode of growth enhances the pathogenicity of Staphylococcus spp. considerably, because once they adhere, staphylococci embed themselves in a protective, self-produced matrix of extracellular polymeric substances (EPSs). The aim of this study was to investigate the influence of forces of staphylococcal adhesion to different biomaterials on icaA (which regulates the production of EPS matrix components) and cidA (which is associated with cell lysis and extracellular DNA [eDNA] release) gene expression in Staphylococcus aureus biofilms. Experiments were performed with S. aureus ATCC 12600 and its isogenic mutant, S. aureus ATCC 12600 Δpbp4, deficient in peptidoglycan cross-linking. Deletion of pbp4 was associated with greater cell wall deformability, while it did not affect the planktonic growth rate, biofilm formation, cell surface hydrophobicity, or zeta potential of the strains. The adhesion forces of S. aureus ATCC 12600 were the strongest on polyethylene (4.9 ± 0.5 nN), intermediate on polymethylmethacrylate (3.1 ± 0.7 nN), and the weakest on stainless steel (1.3 ± 0.2 nN). The production of poly-N-acetylglucosamine, eDNA presence, and expression of icaA genes decreased with increasing adhesion forces. However, no relation between adhesion forces and cidA expression was observed. The adhesion forces of the isogenic mutant S. aureus ATCC 12600 Δpbp4 (deficient in peptidoglycan cross-linking) were much weaker than those of the parent strain and did not show any correlation with the production of poly-N-acetylglucosamine, eDNA presence, or expression of the icaA and cidA genes. This suggests that adhesion forces modulate the production of the matrix molecule poly-N-acetylglucosamine, eDNA presence, and icaA gene expression by inducing nanoscale cell wall deformation, with cross-linked peptidoglycan layers playing a pivotal role in this adhesion force sensing.     

Calculation of the force field required for nucleus deformation during cell migration through constrictions

During cell migration in confinement, the nucleus has to deform for a cell to pass through small constrictions. Such nuclear deformations require significant forces. A direct experimental measure of the deformation force field is extremely challenging. However, experimental images of nuclear shape are relatively easy to obtain. Therefore, here we present a method to calculate predictions of the deformation force field based purely on analysis of experimental images of nuclei before and after deformation. Such an inverse calculation is technically non-trivial and relies on a mechanical model for the nucleus. Here we compare two simple continuum elastic models of a cell nucleus undergoing deformation. In the first, we treat the nucleus as a homogeneous elastic solid and, in the second, as an elastic shell. For each of these models we calculate the force field required to produce the deformation given by experimental images of nuclei in dendritic cells migrating in microchannels with constrictions of controlled dimensions. These microfabricated channels provide a simplified confined environment mimicking that experienced by cells in tissues. Our calculations predict the forces felt by a deforming nucleus as a migrating cell encounters a constriction. Since a direct experimental measure of the deformation force field is very challenging and has not yet been achieved, our numerical approaches can make important predictions motivating further experiments, even though all the parameters are not yet available. We demonstrate the power of our method by showing how it predicts lateral forces corresponding to actin polymerisation around the nucleus, providing evidence for actin generated forces squeezing the sides of the nucleus as it enters a constriction. In addition, the algorithm we have developed could be adapted to analyse experimental images of deformation in other situations.     

Polyphenolics from peach (Prunus persica var. Rich Lady) inhibit tumor growth and metastasis of MDA-MB-435 breast cancer cells in vivo

The tumor growth inhibition and anti-metastatic effects of peach polyphenolics were investigated in vivo using a xenograft model and MDA-MB-435 breast cancer cells. Results showed that tumor growth and lung metastasis were inhibited in vivo by peach polyphenolics in a dose range of 0.8–1.6 mg/day, and these effects were mediated by inhibition of metalloproteinases gene expression. Modulation of metalloproteinase-2, metalloproteinase-3 and metalloproteinase-13 gene expression may be some of the molecular targets for anti-metastatic activity of peach polyphenolics. Therefore, these compounds may constitute a novel chemopreventive tool to reduce the risk of metastasis in the combination therapy when primary cancer is diagnosed. Conversion to equivalent human intake for future clinical studies using the body surface area normalization method gave a dose of ~370.6 mg/day for a human adult of 60 kg, which can be supplied by consuming two to three peach fruit per day or alternatively using a dietary supplement peach polyphenol extract powder.     

Effects of rhDecorin on TGF-β1 induced human hepatic stellate cells LX-2 activation

Decorin is a small leucine-rich extracellular matrix proteoglycan composed of a core protein with a single glycosaminoglycan (GAG) chain near the N-terminus and N-glycosylated at three potential sites. Decorin is involved in the regulation of formation and organization of collagen fibrils, modulation of the activity of growth factors such as transforming growth factor β (TGF-β), and exerts other effects on cell proliferation and behavior. Increasing evidences show that decorin plays an important role in fibrogenesis by regulating TGF-β, a key stimulator of fibrosis, and by directly modulating the degradation of extracellular matrix (ECM) from activated hepatic stellate cells (HSCs). In this study, the core protein of human decorin was cloned and expressed in Escherichia coli. The purified recombinant human decorin (rhDecorin) significantly inhibited the proliferation of LX-2 cells, a human HSC cell line, stimulated by TGF-β1. RT-PCR result showed that the expression of metalloproteinase-2 (MMP-2) and tissue inhibitor of metalloproteinase-1 (TIMP-1) were reduced by rhDecorin in LX-2 cells stimulated by TGF-β1. Furthermore, the protein expression of smooth muscle-α-actin (α-SMA), collagen type III and phosphorylated Smad2 (p-Smad2) was significantly decreased in the presence of rhDecorin. rhDecorin also reduced fibrillogenesis of collagen type I in a dose-dependent manner. Gene expression profiles of LX-2 cells stimulated by TGF-β1 in the presence and the absence of rhDecorin were obtained by using cDNA microarray technique and differentially expressed genes were identified to provide further insight into the molecular action mechanism of decorin on LX-2 cells.     

异位（过）表达PGRN抑制IL-1β引起的髓核细胞损伤

炎症因子IL-1β是引起髓核细胞功能异常的关键因素之一。颗粒体蛋白原（progranulin,PGRN）是一种多功能生长因子,在组织修复、炎症反应等过程中发挥重要作用,但其在髓核细胞中的作用尚不清楚。本研究以IL-1β诱导的髓核细胞炎性损伤模型为研究对象,探讨PGRN对IL 1β诱导的髓核细胞损伤的保护作用及其机制。基因转染结合MTT方法证明,与IL-1β处理的细胞比较,过表达PGRN可逆转IL-1β引起的原代培养的髓核细胞生长抑制,促进细胞增殖。TUNEL技术和流式细胞分析显示,PGRN抑制IL-1β诱导的髓核细胞凋亡。Western印迹和RT-qPCR方法揭示,与IL-1β处理的细胞相比,过表达PGRN显著上调聚蛋白聚糖（aggrecan）和II型胶原（collagen type II）的蛋白质表达,但下调基质金属蛋白酶-13（MMP-13）、分解素-金属蛋白酶ADAMTS-5的表达,同时抑制IL-1β诱导的炎性因子IL-6、IL-8和TNF-α的表达,说明PGRN可缓解IL-1β引起的炎性反应,并减少细胞外基质（ECM）相关蛋白质的降解。此外,过表达PGRN还可降低p65、p-IkB a和β-catenin的蛋白质表达水平,提示PGRN可抑制IL-1β下游TNF-α介导的NF-κB信号途径及β-catenin途径。总之,上述结果提示,过表达PGRN可通过抑制IL-1β诱导的炎性反应、髓核细胞凋亡及基质代谢紊乱,缓解IL-1β诱导的髓核细胞损伤;PGRN的这种抗炎、抗基质降解作用可能与PGRN参与调控NF-κB和β-catenin信号途径有关。     

Clonorchis sinensis excretory–secretory products regulate migration and invasion in cholangiocarcinoma cells via extracellular signal-regulated kinase 1/2/nuclear factor-κB-dependent matrix metalloproteinase-9 expression

Matrix metalloproteinase-9 plays an important role in the invasion and metastasis of various types of cancer cells. We have previously reported that excretory–secretory products from Clonorchis sinensis increases matrix metalloproteinase-9 expression. However, the regulatory mechanisms through which matrix metalloproteinase-9 expression affects cholangiocarcinoma development remain unclear. In the current study, we examined the potential role of excretory–secretory products in regulating the migration and invasion of various cholangiocarcinoma cell lines. We demonstrated that excretory–secretory products significantly induced matrix metalloproteinase-9 expression and activity in a concentration-dependent manner. Reporter gene and chromatin immunoprecipitation assays showed that excretory–secretory products induced matrix metalloproteinase-9 expression by enhancing the activity of nuclear factor-kappa B. Moreover, excretory–secretory products induced the degradation and phosphorylation of IκBα and stimulated nuclear factor-kappa B p65 nuclear translocation, which was regulated by extracellular signal-regulated kinase 1/2. Taken together, our findings indicated that the excretory–secretory product-dependent enhancement of matrix metalloproteinase-9 activity and subsequent induction of IκBα and nuclear factor-kappa B activities may contribute to the progression of cholangiocarcinoma.     

Regulation of the α-expansin gene OsEXPA8 expression affects root system architecture in transgenic rice plants

Expansins are cell wall proteins implicated in the control of plant growth via loosening of the extracellular matrix, and are encoded by a large gene family. However, data linked to loss of function of single genes which support the role of expansins in root growth remain limited. In this study, we used RNA interference to examine the biological functions of the rice α-expansin gene OsEXPA8. Repression of OsEXPA8 expression in rice impaired the root system architecture and plant growth significantly, leading to shorter primary roots and fewer lateral roots. Accordingly, the cell size of the root vascular bundle reduced drastically. Notably, OsEXPA8 silencing impaired root hair elongation; moreover, plant height was clearly reduced. Transient expression of OsEXPA8-GFP in onion epidermal cells verified that OsEXPA8 is located on the cell wall. OsEXPA8 was expressed predominantly in the root and shoot of one-week-old rice seedlings, and highly induced by NaCl but suppressed by nitrate and phosphate starvation. In addition, atomic force microscopy was used to explore alterations in cell wall nanomechanics caused by OsEXPA8 protein reduction, which showed that the wall stiffness (Young’s modulus) of OsEXPA8-silenced suspension cells was increased significantly. Taken together, our results suggest that OsEXPA8 is critical for root system architecture, which supports the hypothesis that expansins are involved in enhancing plant growth by mediating cell wall loosening.     

Substrate Deformation Predicts Neuronal Growth Cone Advance

Although pulling forces have been observed in axonal growth for several decades, their underlying mechanisms, absolute magnitudes, and exact roles are not well understood. In this study, using two different experimental approaches, we quantified retrograde traction force in Aplysia californica neuronal growth cones as they develop over time in response to a new adhesion substrate. In the first approach, we developed a novel method, to our knowledge, for measuring traction forces using an atomic force microscope (AFM) with a cantilever that was modified with an Aplysia cell adhesion molecule (apCAM)-coated microbead. In the second approach, we used force-calibrated glass microneedles coated with apCAM ligands to guide growth cone advance. The traction force exerted by the growth cone was measured by monitoring the microneedle deflection using an optical microscope. Both approaches showed that Aplysia growth cones can develop traction forces in the 10⁰–10² nN range during adhesion-mediated advance. Moreover, our results suggest that the level of traction force is directly correlated to the stiffness of the microneedle, which is consistent with a reinforcement mechanism previously observed in other cell types. Interestingly, the absolute level of traction force did not correlate with growth cone advance toward the adhesion site, but the amount of microneedle deflection did. In cases of adhesion-mediated growth cone advance, the mean needle deflection was 1.05 ± 0.07 μm. By contrast, the mean deflection was significantly lower (0.48 ± 0.06 μm) when the growth cones did not advance. Our data support a hypothesis that adhesion complexes, which can undergo micron-scale elastic deformation, regulate the coupling between the retrogradely flowing actin cytoskeleton and apCAM substrates, stimulating growth cone advance if sufficiently abundant.     

A quantitative and qualitative RNA expression profiling assay for cell culture with single cell resolution

Cells are often characterized by their gene expression profile. However, commonly used methods to detect mRNA require cell pooling and could therefore mask differences in gene expression within heterogeneous cell populations. q²PISH allows for the analysis of both qualitative and quantitative (q²) gene expression on cultured cells for quality control measures with single cell resolution. q²PISH was optimized for the subsequent use of two alkaline phosphatase substrates in combination with a cell nucleus count to allow for accurate quantification of gene expression per cell and simultaneously qualitative assessment of potential culture population drift or heterogeneity. As proof of principle the assay was applied to cell lines derived from different areas of the bovine intervertebral disc, showing significant difference in the expression of Col1a1, Col2a1, Acan and Sox9. Furthermore, the assay served to explore a potential impact on cultured cells when substituting a critical media component, fetal bovine serum (FBS), suggesting no significant difference in gene expression for the biomarkers analyzed. As a tool, q²PISH serves as an accurate quality control with single cell resolution for cultured cells.     

Force by minus-end motors Dhc1 and Klp2 collapses the S. pombe spindle after laser ablation

A microtubule-based machine called the mitotic spindle segregates chromosomes when eukaryotic cells divide. In the fission yeast Schizosaccharomyces pombe, which undergoes closed mitosis, the spindle forms a single bundle of microtubules inside the nucleus. During elongation, the spindle extends via antiparallel microtubule sliding by molecular motors. These extensile forces from the spindle are thought to resist compressive forces from the nucleus. We probe the mechanism and maintenance of this force balance via laser ablation of spindles at various stages of mitosis. We find that spindle pole bodies collapse toward each other after ablation, but spindle geometry is often rescued, allowing spindles to resume elongation. Although this basic behavior has been previously observed, many questions remain about the phenomenon's dynamics, mechanics, and molecular requirements. In this work, we find that previously hypothesized viscoelastic relaxation of the nucleus cannot explain spindle shortening in response to laser ablation. Instead, spindle collapse requires microtubule dynamics and is powered by the minus-end-directed motor proteins dynein Dhc1 and kinesin-14 Klp2, but it does not require the minus-end-directed kinesin Pkl1.     

Nuclear mechanotransduction in stem cells

In development and in homeostatic maintenance of tissues, stem cells and progenitor cells are constantly subjected to forces. These forces can lead to significant changes in gene expression and function of stem cells, mediating self-renewal, lineage specification, and even loss of function. One of the ways that has been proposed to mediate these functional changes in stem cells is nuclear mechanotransduction — the process by which forces are converted to signals in the nucleus. The purpose of this review is to discuss the means by which mechanical signals are transduced into the nucleus, through the linker of nucleoskeleton and cytoskeleton (LINC) complex and other nuclear envelope transmembrane (NET) proteins, which connect the cytoskeleton to the nucleus. We discuss how LINC/NETs confers tissue-specific mechanosensitivity to cells and further elucidate how LINC/NETs acts as a control center for nuclear mechanical signals, regulating both gene expression and chromatin organization. Throughout, we primarily focus on stem cell–specific examples, notwithstanding that this is a nascent field. We conclude by highlighting open questions and pointing the way to enhanced research efforts to understand the role nuclear mechanotransduction plays in cell fate choice.     

Rapid and Serial Quantification of Adhesion Forces of Yeast and Mammalian Cells

Cell adhesion to surfaces represents the basis for niche colonization and survival. Here we establish serial quantification of adhesion forces of different cell types using a single probe. The pace of single-cell force-spectroscopy was accelerated to up to 200 yeast and 20 mammalian cells per probe when replacing the conventional cell trapping cantilever chemistry of atomic force microscopy by underpressure immobilization with fluidic force microscopy (FluidFM). In consequence, statistically relevant data could be recorded in a rapid manner, the spectrum of examinable cells was enlarged, and the cell physiology preserved until approached for force spectroscopy. Adhesion forces of Candida albicans increased from below 4 up to 16 nN at 37°C on hydrophobic surfaces, whereas a Δhgc1-mutant showed forces consistently below 4 nN. Monitoring adhesion of mammalian cells revealed mean adhesion forces of 600 nN of HeLa cells on fibronectin and were one order of magnitude higher than those observed for HEK cells.     

Vascular endothelial cells minimize the total force on their nuclei

The vascular endothelium is a cellular monolayer that lines the arterial walls. It plays a vital role in the initiation and development of atherosclerosis, an occlusive arterial disease responsible for 50% of deaths in the Western world. The focal nature of the disease suggests that hemodynamic forces are an important factor in its pathogenesis. This has led to the investigation of the effects of mechanical forces on the endothelial cells themselves. It has been found that endothelial cells do respond to stresses induced by the flowing blood; in particular, they elongate and align with an imposed flow direction. In this paper, we calculate the distribution of force exerted on a three-dimensional hump, representing the raised cell nucleus, by a uniform shear flow. It is found that, for a nonaxisymmetric ellipsoidal hump, the least total force is experienced when the hump is aligned with the flow. Furthermore, for a hump of fixed volume, there is a specific aspect ratio combination that results in the least total force upon the hump, (0.38:2.2:1.0; height:length:width). This is approximately the same as the average aspect ratio taken up by the cell nuclei in vivo (0.27:2.23:1.0). It is possible, therefore, that the cells respond to the flow in such a way as to minimize the total force on their nuclei.