Whisker-mediated plant transformation: An alternative technology

A number of different methods, involving direct DNA delivery are now available for plant transformation. Here we review the most recently developed technique which involves the mixing of silicon carbide whiskers with plant cells and plasmid DNA. Fertile transgenic plants have now been produced using whisker-mediated transformation, and this method can now be considered as a simple, inexpensive alternative for plant transformation. A brief review on transformation of animal cells andChlamydomonas using whiskers technology is also included.     

Ultrasound: mechanical gene transfer into plant cells by sonoporation

Development of nonviral gene transfer methods would be a valuable alternative of gene therapy or transformation. Ultrasound can produce a variety of nonthermal bioeffects via acoustic cavitation. Cavitation bubbles can induce cell death or transient membrane permeabilization (sonoporation) on cells. Application of sonoporation for gene transfer into cells or tissues develops quickly in recent years. Many studies have been performed in vitro exposure systems to a variety of cell lines transfected successfully. In vivo, cavitation initiation and control are more difficult, but can be enhanced by ultrasound contrast agents (microbubbles). The use of ultrasound for nonviral gene delivery has been applied for mammalian systems, which provides a fundamental basis and strong promise for development of new gene therapy methods for clinical medicine. In this paper, ultrasound applied to plant cell transformation or gene transfer is reviewed. Recently, most researches are focused on sonication-assisted Agrobacterium-mediated transformation (SAAT) in plant cells or tissues. Microbubbles are also proposed to apply to gene transfer in plant cells and tissues.     

Carbon Nanotube‐Silicon Solar Cells

Due to the high cost of silicon photovoltaics there is currently great interest in finding alternative semiconductor materials for light harvesting devices. Single‐walled carbon nanotubes are an allotrope of carbon with unique electrical and optical properties and are promising as future photovoltaic materials. It is thus important to investigate the methods of exploiting their properties in photovoltaic devices. In addition to already extensive research using carbon nanotubes in organic photovoltaics and photoelectrochemical cells, another way to do this is to combine them with a relatively well understood model semiconductor such as silicon. Nanotube‐silicon heterojunction solar cells are a recent photovoltaic architecture with demonstrated power conversion efficiencies of up to ～14% that may in part exploit the photoactivity of carbon nanotubes.     

炎症-肿瘤转化在眼部相关疾病中的研究进展

炎症向癌症转化的机制一直是癌症研究中的重点。作为炎症-肿瘤转化起始时所处的环境，炎性微环境是一个多种调控因子、细胞的大集合，其中包含的肿瘤干细胞、肿瘤相关巨噬细胞以及细胞因子（如趋化因子、生长因子）等在常见的眼部肿瘤中对肿瘤的起始、发生、演进乃至恶性转化和转移的过程起到了至关重要的调控作用。基于此，主要讨论了在炎性微环境中的肿瘤相关细胞、细胞因子以及细胞外基质等对肿瘤细胞的增殖、转移、浸润、侵袭过程的影响，着重探讨了眼部炎症-肿瘤转化相关的分子机制；并综述了视网膜母细胞瘤、腺样囊性癌等常见眼部肿瘤的特征及其由炎症到肿瘤发生过程中起重要调控作用的分子；最后，针对这些眼部肿瘤普遍存在的信号通路和分子靶点做出了对未来诊断及治疗方法的展望，以期在今后对眼科肿瘤的诊治过程中，能够针对提及的炎性成分设计思路，最大化防止炎症-肿瘤转化和恶性转归出现。     

Transformation of Medicago truncatula via infiltration of seedlings or flowering plants with Agrobacterium

Two rapid and simple in planta transformation methods have been developed for the model legume Medicago truncatula. The first approach is based on a method developed for transformation of Arabidopsis thaliana and involves infiltration of flowering plants with a suspension of Agrobacterium. The second method involves infiltration of young seedlings with Agrobacterium. In both cases a proportion of the progeny of the infiltrated plants is transformed. The transformation frequency ranges from 4.7 to 76% for the flower infiltration method, and from 2.9 to 27.6% for the seedling infiltration method. Both procedures resulted in a mixture of independent transformants and sibling transformants. The transformants were genetically stable, and analysis of the T2 generation indicates that the transgenes are inherited in a Mendelian fashion. These transformation systems will increase the utility of M. truncatula as a model system and enable large-scale insertional mutagenesis. T-DNA tagging and the many adaptations of this approach provide a wide range of opportunities for the analysis of the unique aspects of legumes.     

Single‐Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications

Emerging solar cells, namely, organic solar cells and perovskite solar cells, are the thin‐film photovoltaics that have light to electricity conversion efficiencies close to that of silicon solar cells while possessing advantages in having additional functionalities, facile‐processability, and low fabrication cost. To maximize these advantages, the electrode components must be replaced by materials that are more flexible and cost‐effective. Researchers around the globe have been looking for the new electrodes that meet these requirements. Among many candidates, single‐walled carbon nanotubes have demonstrated their feasibility as the new alternative to conventional electrodes, such as indium tin oxide and metals. This review discusses various growth methods of single‐walled carbon nanotubes and their electrode applications in thin‐film photovoltaics.     

In planta transformation of <Emphasis Type="Italic">Notocactus scopa</Emphasis> cv. <Emphasis Type="Italic">Soonjung</Emphasis> by <Emphasis Type="Italic">Agrobacterium </Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>

Notocactus scopa cv. Soonjung was subjected to in planta Agrobacterium tumefaciens-mediated transformation with vacuum infiltration, pin-pricking, and a combination of the two methods. The pin-pricking combined with vacuum infiltration (20-30 cmHg for 15 min) resulted in a transformation efficiency of 67-100%, and the expression of the uidA and nptII genes was detected in transformed cactus. The established in planta transformation technique generated a transgenic cactus with higher transformation efficiency, shortened selection process, and stable gene expression via asexual reproduction. All of the results showed that the in planta transformation method utilized in the current study provided an efficient and time-saving procedure for the delivery of genes into the cactus genome, and that this technique can be applied to other asexually reproducing succulent plant species.     

真空渗透法转化植物的研究

以拟南芥为材料介绍一种不需组培的原位植物转化方法—真空渗透法。将含有Ｔ—ＤＮＡ载体的农杆菌细胞悬液,用真空渗透的方式转化愈伤的完整植株,从而直接获得转化的种子。该法快速简便、重复性好,不需经过组培阶段即可获得转化植株,其转化效率完全可以满足基因转移及表达检测研究的需要     

Solution‐Based Silicon in Thin‐Film Solar Cells

Solution‐based semiconductors give rise to the next generation of thin‐film electronics. Solution‐based silicon as a starting material is of particular interest because of its favorable properties, which are already vastly used in conventional electronics. Here, the application of a silicon precursor based on neopentasilane for the preparation of thin‐film solar cells is reported for the first time, and, for the first time, a performance similar to conventional fabrication methods is demonstrated. Because three different functional layers, n‐type contact layer, intrinsic absorber, and p‐type contact layer, have to be stacked on top of each other, such a device is a very demanding benchmark test of performance of solution‐based semiconductors. Complete amorphous silicon n‐i‐p solar cells with an efficiency of 3.5% are demonstrated, which significantly exceeds previously reported values.     

Infiltration with <Emphasis Type="Italic">Agrobacterium</Emphasis> — the method for stable transformation avoiding tissue culture

A number of in planta transformation protocols that avoid long culture under sterile conditions were developed for Arabidopsis thaliana. The most widely used methods are based on vacuum infiltration and floral dip. These methods were adapted for transformation of other species as well. Successful in planta transformations of alfalfa, radish, pakchoi and petunia were reported recently. In this short review we present several modified procedures originally developed for Arabidopsis thaliana and in some cases adapted to other species. We emphasize the crucial parameters involved in in planta transformation. We also describe here the studies attempting to shed light on the mechanisms and estimating the cellular target of transformation, which may help in transforming new plant species.     

Methodologies to increase the transformation efficiencies and the range of bacteria that can be transformed

Methods for transfer of exogenous DNA into cells are essential for genetics and molecular biology, and the lack of effective methods hampers research on many different species of bacteria which have shown to be particularly recalcitrant to transformation. This review presents the progress on the development of methods for artificial transformation of bacteria with emphasis on different methodologies and the range of bacteria that can be transformed. The methods' strengths and weaknesses are described.     

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping

One of major approaches to cheaper solar cells is reducing the amount of semiconductor material used for their fabrication and making cells thinner. To compensate for lower light absorption such physically thin devices have to incorporate light-trapping which increases their optical thickness. Light scattering by textured surfaces is a common technique but it cannot be universally applied to all solar cell technologies. Some cells, for example those made of evaporated silicon, are planar as produced and they require an alternative light-trapping means suitable for planar devices. Metal nanoparticles formed on planar silicon cell surface and capable of light scattering due to surface plasmon resonance is an effective approach.The paper presents a fabrication procedure of evaporated polycrystalline silicon solar cells with plasmonic light-trapping and demonstrates how the cell quantum efficiency improves due to presence of metal nanoparticles.To fabricate the cells a film consisting of alternative boron and phosphorous doped silicon layers is deposited on glass substrate by electron beam evaporation. An Initially amorphous film is crystallised and electronic defects are mitigated by annealing and hydrogen passivation. Metal grid contacts are applied to the layers of opposite polarity to extract electricity generated by the cell. Typically, such a ~2 μm thick cell has a short-circuit current density (Jsc) of 14-16 mA/cm², which can be increased up to 17-18 mA/cm² (~25% higher) after application of a simple diffuse back reflector made of a white paint.To implement plasmonic light-trapping a silver nanoparticle array is formed on the metallised cell silicon surface. A precursor silver film is deposited on the cell by thermal evaporation and annealed at 23°C to form silver nanoparticles. Nanoparticle size and coverage, which affect plasmonic light-scattering, can be tuned for enhanced cell performance by varying the precursor film thickness and its annealing conditions. An optimised nanoparticle array alone results in cell Jsc enhancement of about 28%, similar to the effect of the diffuse reflector. The photocurrent can be further increased by coating the nanoparticles by a low refractive index dielectric, like MgF₂, and applying the diffused reflector. The complete plasmonic cell structure comprises the polycrystalline silicon film, a silver nanoparticle array, a layer of MgF₂, and a diffuse reflector. The Jsc for such cell is 21-23 mA/cm², up to 45% higher than Jsc of the original cell without light-trapping or ~25% higher than Jsc for the cell with the diffuse reflector only.

Introduction

Light-trapping in silicon solar cells is commonly achieved via light scattering at textured interfaces. Scattered light travels through a cell at oblique angles for a longer distance and when such angles exceed the critical angle at the cell interfaces the light is permanently trapped in the cell by total internal reflection (Animation 1: Light-trapping). Although this scheme works well for most solar cells, there are developing technologies where ultra-thin Si layers are produced planar (e.g. layer-transfer technologies and epitaxial c-Si layers) ¹ and or when such layers are not compatible with textures substrates (e.g. evaporated silicon) ². For such originally planar Si layer alternative light trapping approaches, such as diffuse white paint reflector ³, silicon plasma texturing ⁴ or high refractive index nanoparticle reflector ⁵ have been suggested.Metal nanoparticles can effectively scatter incident light into a higher refractive index material, like silicon, due to the surface plasmon resonance effect ⁶. They also can be easily formed on the planar silicon cell surface thus offering a light-trapping approach alternative to texturing. For a nanoparticle located at the air-silicon interface the scattered light fraction coupled into silicon exceeds 95% and a large faction of that light is scattered at angles above critical providing nearly ideal light-trapping condition (Animation 2: Plasmons on NP). The resonance can be tuned to the wavelength region, which is most important for a particular cell material and design, by varying the nanoparticle average size, surface coverage and local dielectric environment ^6,7. Theoretical design principles of plasmonic nanoparticle solar cells have been suggested ⁸. In practice, Ag nanoparticle array is an ideal light-trapping partner for poly-Si thin-film solar cells because most of these design principle are naturally met. The simplest way of forming nanoparticles by thermal annealing of a thin precursor Ag film results in a random array with a relatively wide size and shape distribution, which is particularly suitable for light-trapping because such an array has a wide resonance peak, covering the wavelength range of 700-900 nm, important for poly-Si solar cell performance. The nanoparticle array can only be located on the rear poly-Si cell surface thus avoiding destructive interference between incident and scattered light which occurs for front-located nanoparticles ⁹. Moreover, poly-Si thin-film cells do not requires a passivating layer and the flat base-shaped nanoparticles (that naturally result from thermal annealing of a metal film) can be directly placed on silicon further increases plasmonic scattering efficiency due to surface plasmon-polariton resonance ¹⁰.The cell with the plasmonic nanoparticle array as described above can have a photocurrent about 28% higher than the original cell. However, the array still transmits a significant amount of light which escapes through the rear of the cell and does not contribute into the current. This loss can be mitigated by adding a rear reflector to allow catching transmitted light and re-directing it back to the cell. Providing sufficient distance between the reflector and the nanoparticles (a few hundred nanometers) the reflected light will then experience one more plasmonic scattering event while passing through the nanoparticle array on re-entering the cell and the reflector itself can be made diffuse - both effects further facilitating light scattering and hence light-trapping. Importantly, the Ag nanoparticles have to be encapsulated with an inert and low refractive index dielectric, like MgF₂ or SiO₂, from the rear reflector to avoid mechanical and chemical damage ⁷. Low refractive index for this cladding layer is required to maintain a high coupling fraction into silicon and larger scattering angles, which are ensured by the high optical contrast between the media on both sides of the nanoparticle, silicon and dielectric ⁶. The photocurrent of the plasmonic cell with the diffuse rear reflector can be up to 45% higher than the current of the original cell or up to 25% higher than the current of an equivalent cell with the diffuse reflector only.     

Transient genetic transformation of embryogenic callus of <Emphasis Type="Italic">Cocos nucifera</Emphasis>

Coconut palm (Cocos nucifera) is a plant species recalcitrant to in vitro morphogenesis and no protocols for the genetic transformation of coconut tissues have been published. The present study aimed to develop a protocol for genetic transformation of this palm species; evaluating reporter genes, transformation methods, and conditions for the use of antibiotics to select transformed plant cells. The gene gusA was first used for Agrobacterium tumefaciens mediated transformation of coconut embryogenic calli. However, endogenous GUS-like activity was found in calli not co-cultured with bacteria. Then essays for Agrobacterium-mediated transformation were developed using green and red fluorescent genes. Both genes are suitable as reporter genes for coconut transformation. In order to establish a protocol for coconut genetic transformation, an approach was used that combined biobalistics to generate micro-wounds in explants, vacuum infiltration and co-culture with Agrobacterium tumefaciens (C58C1 + pER10W-35SRed containing the embryogenesis related gene WUSCHEL). Calli treated with the combined protocol showed red fluorescence with greater intensity and greater area than calli treated with either biobalistics or infiltration, followed by bacteria co-culture. PCR amplification of DNA extracts from transformed embryogenic callus produced a band with the expected size using WUSCHEL primers (862 bp). No band was obtained using the VirE2 primers. This is the first report of transient genetic transformation of C. nucifera and it is the first step toward a protocol that will be useful for the study of the role of genes of interest and for practical applications, such as the improvement of coconut micropropagation via somatic embryogenesis.     

The interaction of proteins and cells with affinity ligands covalently coupled to silicon surfaces as monitored by ellipsometry

Two methods for the chemical binding of biomolecules to silicon surfaces are described. The first method utilizes an alkyl silane and a nucleophilic reagent to join the biomolecule to the silicon surface; the second method involves crosslinking with glutaraldehyde in order to couple the biomolecule and albumin molecules, which have first been physically adsorbed. The course of binding to the silicon surface has been followed with the aid of ellipsometry. This optical measuring technique estimates the thicknesses of, e.g., organic layers, by measuring the polarization properties of a light beam before and after reflection at surfaces. The method by which the binding of a biomolecule to its corresponding affinity ligand on silicon wafers can be followed with this technique is reported. The systems studied are concanavalin A-Saccharomyces cerevisiae cells, immunoglobulin G-Staphylococcus aureus cells, and an NAD-analog-lactate dehydrogenase. With ellipsometry it was possible to assess how the incubation time and the concentration of the cells and the biomolecules added influenced the results. It was found that an increasing time of incubation and higher concentration resulted in a more complete coverage of the silicon wafer surfaces.     

Rubidium Multication Perovskite with Optimized Bandgap for Perovskite‐Silicon Tandem with over 26% Efficiency

Rubidium (Rb) is explored as an alternative cation to use in a novel multication method with the formamidinium/methylammonium/cesium (Cs) system to obtain 1.73 eV bangap perovskite cells with negligible hysteresis and steady state efficiency as high as 17.4%. The study shows the beneficial effect of Rb in improving the crystallinity and suppressing defect migration in the perovskite material. The light stability of the cells examined under continuous illumination of 12 h is improved upon the addition of Cs and Rb. After several cycles of 12 h light–dark, the cell retains 90% of its initial efficiency. In parallel, sputtered transparent conducting oxide thin films are developed to be used as both rear and front transparent contacts on quartz substrate with less than 5% parasitic absorption of near infrared wavelengths. Using these developments, semi‐transparent perovskite cells are fabricated with steady state efficiency of up to 16.0% and excellent average transparency of ≈84% between 720 and 1100 nm. In a tandem configuration using a 23.9% silicon cell, 26.4% efficiency (10.4% from the silicon cell) in a mechanically stacked tandem configuration is demonstrated which is very close to the current record for a single junction silicon cell of 26.6%.     

Rapid,in situ detection of Agrobacterium tumefaciens attachment to leaf tissue

Attachment of the plant pathogen Agrobacterium tumefaciens to host plant cells is an early and necessary step in plant transformation and agroinfiltration processes. However, bacterial attachment behavior is not well understood in complex plant tissues. Here we developed an imaging‐based method to observe and quantify A. tumefaciens attached to leaf tissue in situ. Fluorescent labeling of bacteria with nucleic acid, protein, and vital dyes was investigated as a rapid alternative to generating recombinant strains expressing fluorescent proteins. Syto 16 green fluorescent nucleic acid stain was found to yield the greatest signal intensity in stained bacteria without affecting viability or infectivity. Stained bacteria retained the stain and were detectable over 72 h. To demonstrate in situ detection of attached bacteria, confocal fluorescent microscopy was used to image A. tumefaciens in sections of lettuce leaf tissue following vacuum‐infiltration with labeled bacteria. Bacterial signals were associated with plant cell surfaces, suggesting detection of bacteria attached to plant cells. Bacterial attachment to specific leaf tissues was in agreement with known leaf tissue competencies for transformation with Agrobacterium. Levels of bacteria attached to leaf cells were quantified over time post‐infiltration. Signals from stained bacteria were stable over the first 24 h following infiltration but decreased in intensity as bacteria multiplied in planta. Nucleic acid staining of A. tumefaciens followed by confocal microscopy of infected leaf tissue offers a rapid, in situ method for evaluating attachment of A. tumefaciens' to plant expression hosts and a tool to facilitate management of transient expression processes via agroinfiltration. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Arabidopsis ecotypes and mutants that are recalcitrant to Agrobacterium root transformation are susceptible to germ-line transformation

Germ-line transformation (vacuum infiltration) is frequently used to transform Arabidopsis thaliana using Agrobacterium tumefaciens. We have recently identified several Arabidopsis ecotypes and T-DNA-tagged mutants that are recalcitrant to Agrobacterium-mediated transformation of cut root segments. Some of these ecotypes and mutants are deficient in their ability to bind bacteria. Some are deficient in T-DNA integration. We report here that using a germ-line transformation protocol we transformed these ecotypes and mutants, including attachment- and integration-defective Arabidopsis plants, with a frequency similar to that of highly susceptible wild-type plants. However, we could not transform otherwise highly susceptible Arabidopsis plants by germ-line or root transformation using several vir and attachment-deficient Agrobacterium mutants. These results indicate that certain plant factors important for transformation may exist in germ-line tissue but may be lacking in some somatic cells.     

The Novel Use of a Combination of Sonication and Vacuum Infiltration in <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated Transformation of Kidney Bean (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.) with <Emphasis Type="Italic">lea</Emphasis> Gene

An efficient gene transfer system without tissue culture steps was developed for kidney bean by using sonication and vacuum infiltration assisted, Agrobacterium-mediated transformation. Transgenic kidney bean with a group 3 lea (late embryogenesis abundant) protein gene from Brassica napus was produced through this approach. Among 18 combinations of transformation methods, Agrobacterium-mediated transformation combined with 5 min sonication and 5 min vacuum infiltration turned to be optimal, resulting in the highest transformation efficiency. Transgenic kidney bean plants demonstrated enhanced growth ability under salt and water deficit stress conditions. The increased tolerance was also reflected by delayed development of damage symptoms caused by drought stress. Transgenic lines with high level of lea gene expression showed higher stress tolerance than lines with lower expression level. Stress tolerance of transgenic kidney bean correlated much better with lea gene expression levels than with gene integration results. There is no prior report on the production of transgenic kidney bean using both ultrasonic and vacuum infiltration assisted, Agrobacterium-mediated transformation.     

Properties of the esophageal epithelium in relation to organizative patterns of lymphoid infiltrations in the red-eared turtle

The esophagus of the turtle, like the mucosal surfaces in other species, contains variously sized areas of lymphoid infiltration. The tunica propria and the surface epithelial layer of this area are invaded by the lymphoid cells. The features of the layer of epithelial cells which cover the lymphoid infiltrations are of a special kind: they do not possess vibratile cilia and are able to take up materials flowing into the lumen. The present paper contains further information concerning lymphoid infiltration obtained by histological and histochemical methods. The epithelial layer covering the lymphoid infiltrations is composed of cells with irregularly distributed microvilli, ciliated cells and mucous-secreting cells. After administration of silica and colloidal carbon, the microvillar epithelial cells proved to have these substances inside them, thereby accounting for the pinocytotic activity. The absorbing epithelial cells were not damaged by silica which is a macrophage-toxic agent, while the underlying macrophages are damaged. These results are compared with the features of lymphoid infiltration associated cells in various organs and animals; the hypothesis is proposed that these cells in the esophagus of turtles may originate from the covering epithelial cells.