Ultrastructural and Cytochemical Study on Mature Pollen of Pinus tabulaeformis

The pollen of Pinus tabulaeformis Cart. comprised two prothallial cells, a generative cell and a tube cell which degenerated at pollen maturation. The generative cell had its own cell wall, seperating from the intine of pollen, but with its side wall attached to the infine. Cytoplasmic channels were present on the side of the generative cell wall, which faced to the tube cell cytoplasm. The generative cell differed conspicuously from the tube cell. The main differences include: ( 1 ) The chromatin in the generative cell nucleus was condensed, but was dispersed and had numerous nueleare pores in the tube cell nucleus; (2)There was no microbody in the generative cell but many microbodies were present in the tube cell cytoplasm; (3)More inclusions were present in the tube cell than in the generative cell. Both the generative cell and the tube cells contained lipid bodies and amyloplasts in the cytoplasm, but there were more amyloplasts in the former. The tube cell also contained a few proteins which was absent in the generative cell. In addition, there were numerous mitochondria, polyribosomes, and a few endoplasmic reticulums and dictyosomes in the generative and tube cells. DAPI staining demonstrated numerous cytoplasmic DNA in both generative cell and tube cell. The mode of cytoplasmic inheritance, and the composition, structure and the nature of the pollen wall of P. tabulaefonnis are also discussed in this paper.     

New concepts in radiation-induced apoptosis: 'premitotic apoptosis' and 'postmitotic apoptosis'

Formerly, the mechanisms responsible for the killing of cells by ionizing radiation were regarded as being divided into two distinct forms, interphase death and reproductive death. Since they were defined based on the classical radiobiological concepts using a clonogenic cell survival assay, biochemical and molecular biological mechanisms involved in the induction of radiation-induced cell death were not fully understood in relation to the modes of cell death. Recent multidisciplinary approaches to cell death mechanism have revealed that radiation-induced cell death is divided into several distinct pathways by the time course and cell-cycle position, and that apoptotic cell death plays a key role in almost every mode of cell death. This review discusses the mechanisms of radiation-induced apoptosis in relation to cellcycle progression and highlights a new concept of the mode of cell death: 'premitotic apoptosis' and 'postmitotic apoptosis'. The former is a rapid apoptotic cell death associated with a prompt activation of caspase-3, a key enzyme of intracellular signaling of apoptosis. Arapid execution of cell killing in premitotic apoptosis is presumably due to the prompt activation of a set of pre-existed molecules following DNA damages. In contrast, the latter is a delayed apoptotic cell death after cell division, and unlike premitotic apoptosis, it neither requires a rapid activation of caspase-3 nor is inhibited by a specific inhibitor, Ac-DEVD-CHO. A downregulation of anti-apoptotic genes such as MAPK and Bcl-2 may play a key role in this mode of cell death. Characterization of these two types of apoptotic cell death regarding the cell cycle regulation and intrcellular signaling will greatly help to understand the mechanisms of radiation-induced apoptosis.     

Construction of a cultivation system of a yeast single cell in a cell chip microchamber

A novel single cell screening system was constructed using a yeast cell chip in combination with the yeast cell surface engineering [NanoBiotechnology 2005, 1, 105-111]. Enzymes or functional proteins displayed on a yeast cell surface can be used as a protein cluster. To achieve high-throughput screening of protein libraries on the cell surface, a catalytic reaction by a single cell-surface-engineered yeast cell was successfully carried out in the microchamber on the yeast cell chip. After screening, to replicate a target cell for use in measuring of activity, DNA sequencing, and preservation, a novel single cell cultivation system in the yeast cell chip was constructed. To avoid damage of the rapid dry up of medium in the microchamber array, the yeast cell chip was modified with a protection sheet, so that the modified chip was like a micro-culture tank constructed on the yeast cell chip microchamber. As a result, single yeast cell cultivation in the yeast cell chip microchamber was observed, and the modified yeast cell chip was evaluated to be good for a single cell selection. The improvement showed that the single cell screening system coupled with the single cell cultivation using the modified yeast cell chip may be superior to that by a cell sorter for the isolation of a target cell and its practical use.     

Modeling cell proliferation for simulating three-dimensional tissue morphogenesis based on a reversible network reconnection framework

Tissue morphogenesis in multicellular organisms is accompanied by proliferative cell behaviors: cell division (increase in cell number after each cell cycle) and cell growth (increase in cell volume during each cell cycle). These proliferative cell behaviors can be regulated by multicellular dynamics to achieve proper tissue sizes and shapes in three-dimensional (3D) space. To analyze multicellular dynamics, a reversible network reconnection (RNR) model has been suggested, in which each cell shape is expressed by a single polyhedron. In this study, to apply the RNR model to simulate tissue morphogenesis involving proliferative cell behaviors, we model cell proliferation based on a RNR model framework. In this model, cell division was expressed by dividing a polyhedron at a planar surface for which cell division behaviors were characterized by three quantities: timing, intracellular position, and normal direction of the dividing plane. In addition, cell growth was expressed by volume growth as a function of individual cell times within their respective cell cycles. Numerical simulations using the proposed model showed that tissues grew during successive cell divisions with several cell cycle times. During these processes, the cell number in tissues increased while maintaining individual cell size and shape. Furthermore, tissue morphology dramatically changed based on different regulations of cell division directions. Thus, the proposed model successfully provided a basis for expressing proliferative cell behaviors during morphogenesis based on a RNR model framework.     

Three-Dimensional Numerical Model of Cell Morphology during Migration in Multi-Signaling Substrates

Cell Migration associated with cell shape changes are of central importance in many biological processes ranging from morphogenesis to metastatic cancer cells. Cell movement is a result of cyclic changes of cell morphology due to effective forces on cell body, leading to periodic fluctuations of the cell length and cell membrane area. It is well-known that the cell can be guided by different effective stimuli such as mechanotaxis, thermotaxis, chemotaxis and/or electrotaxis. Regulation of intracellular mechanics and cell’s physical interaction with its substrate rely on control of cell shape during cell migration. In this notion, it is essential to understand how each natural or external stimulus may affect the cell behavior. Therefore, a three-dimensional (3D) computational model is here developed to analyze a free mode of cell shape changes during migration in a multi-signaling micro-environment. This model is based on previous models that are presented by the same authors to study cell migration with a constant spherical cell shape in a multi-signaling substrates and mechanotaxis effect on cell morphology. Using the finite element discrete methodology, the cell is represented by a group of finite elements. The cell motion is modeled by equilibrium of effective forces on cell body such as traction, protrusion, electrostatic and drag forces, where the cell traction force is a function of the cell internal deformations. To study cell behavior in the presence of different stimuli, the model has been employed in different numerical cases. Our findings, which are qualitatively consistent with well-known related experimental observations, indicate that adding a new stimulus to the cell substrate pushes the cell to migrate more directionally in more elongated form towards the more effective stimuli. For instance, the presence of thermotaxis, chemotaxis and electrotaxis can further move the cell centroid towards the corresponding stimulus, respectively, diminishing the mechanotaxis effect. Besides, the stronger stimulus imposes a greater cell elongation and more cell membrane area. The present model not only provides new insights into cell morphology in a multi-signaling micro-environment but also enables us to investigate in more precise way the cell migration in the presence of different stimuli.     

Subsidiary cells in the Orchidaceae: their general distribution with special reference to development in the Oncidieae

Subsidiary cell formation in leaves of the Oncidieae begins with the production of a trapezoid cell on each side of the guard cell mother cell. The trapezoid cells are formed by oblique divisions in the tiles of cells next to the tile of cells containing the guard cell mother cell. The trapezoid cell usually divides unequally to form a subsidiary cell and a derivative cell. The subsidiary cell is smaller and next to the guard cell mother cell. The derivative cell enlarges and is often indistinguishable from the other epidermal cells. Rarely, polar subsidiary cells are also formed. In very rare cases the smaller of the division products of the trapezoid cell divides to form two subsidiary cells next to each guard cell. Subsidiary cells have been found in all tribes of the epidendroid and vandoid groups, all neottoid tribes examined except the Orchideae, and the subfamily Cypripedioideae. The absence of subsidiary cells in primitive genera of the epidendroid tribes and the presence of subsidiary cells in the most advanced genera of the epidendroid and vandoid groups supports the hypothesis that the presence of subsidiary cells is an advanced condition in the Orchidaceae.     

Epidermal growth factor (EGF) induces apoptosis in a transfected cell line expressing EGF receptor on its membrane

Interaction between epidermal growth factor (EGF) and EGF receptor (EGFR) promotes cell growth in most cell lines, but in a number of cell lines, EGF paradoxically inhibits proliferation. In the present study, we established a cell line expressing full-length human EGFR on membrane with a GFP fluorescence reporter at the C-terminal and studied the effects of EGF on cell proliferation in the transfected cell line. Our results suggested that low concentrations of EGF promoted proliferation, while high concentrations of EGF induced loss of adhesion, cell cycle arrest, apoptosis, and inhibition of proliferation. The effects of EGF on cell proliferation correlated well with the expression levels of EGFR. High concentrations of EGF induced both EGFR expression and apoptosis in a dose-dependent manner. Our study reported, for the first time, a relationship between the effects of EGF on cell proliferation and levels of EGFR expression in one cell line expressing different levels of EGFR caused by different concentrations of EGF treatment. The study should provide considerable insight into the effects of EGF on cell proliferation and tumor cell metastasis.     

Best practices for naming,receiving, and managing cells in culture

One of the first considerations in using an existing cell line or establishing a new a cell line is the detailed proactive planning of all phases of the cell line management. It is necessary to have a well-trained practitioner in best practices in cell culture who has experience in receiving a new cell line into the laboratory, the correct and appropriate use of a cell line name, the preparation of cell banks, microscopic observation of cells in culture, growth optimization, cell count, cell subcultivation, as well as detailed protocols on how to expand and store cells. Indeed, the practitioner should best manage all activities of cell culture by ensuring that the appropriate certified facilities, equipment, and validated supplies and reagents are in place.     

A 3D in situ cell counter reveals that breast tumor cell (MDA‐MB‐231) proliferation rate is reduced by the collagen matrix density

Many cell types require the biophysical and biochemical cues within the 3D extracellular matrix (ECM) to exhibit their true physiologically relevant behavior. As a result, cell culture platforms have been evolving from traditional 2D petridish plates into 3D biomatrices, and there is a need for developing analytic tools to characterize 3D cell culture. The existing cell counting method, using a hemocytometer or coulter counter, requires that cells are suspended in fluids prior to counting. This poses a challenge for 3D cell culture as cells are embedded in a 3D biomatrix. We use a facile 3D cell counting method that overcomes this limitation and allows for in situ cell counting in a 3D cell culture using equipment that is commonly available in a biology lab. Using a breast tumor cell line, MDA‐MB‐231, as a model system, we demonstrated that MDA‐MB‐231 cells (1) grow slower within a 3D collagen matrix than on a 2D substrate for an extended growth time (a week) with a comparable, initial cell‐to‐cell distance, (2) their cell growth rate decreases with the increase of collagen concentration, showing a linear growth rate rather than an exponential growth rate. Further work using flow cytometry showed that the observed growth rate reduction was consistent with the retardation of the transition to S (synthesis) phase in the cell cycle. This work demonstrates the validity of the 3D cell counting method and the importance of cell–ECM interactions in cell proliferation. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:990–996, 2015     

Microgametogenesis in Plumbago zeylanica (Plumbaginaceae). 1. Descriptive cytology and three-dimensional organization

The generative cell is initiated as a small, lenticular, unpolarized cell with a cell wall traceable to two origins: the external segment originates as intine, while an inner callose positive cell wall forms de novo. As the lenticular generative cell begins its migration into the pollen cytoplasm, the generative cell becomes polarized both externally and internally, displaying a characteristic shape and patterns of organelle distribution oriented with respect to the vegetative nucleus and independent of pollen aperture location. Separation of the generative cell from the pollen wall begins at the end opposite the vegetative nucleus and results in an elongating protuberance at the opposite end of the generative cell; this becomes associated with a preformed groove located on the surface of the vegetative nucleus. The generative cell subsequently separates from the intine near the vegetative nucleus and moves progressively toward the opposite end of the cell; during this separation, the edge of the wall facing the intine becomes callose-positive and remains so until separating from the intine. The generative cell becomes a free cell within the pollen, which is in physical association with the vegetative nucleus. Generative cell organization and organelle content become increasingly polarized during maturation, with microtubules evident both in the elongating protuberance of the generative cell and in association with organelles. The generative nucleus migrates away from the vegetative nucleus and toward the plastid-rich end of the generative cell, whereas mitochondria are more generally distributed within the cell. Generative cell polarization is made permanent during mitotic division and cytokinesis, i.e., two sperm cells differing in morphology are formed: the larger cell associated with the vegetative nucleus (S_vn) contains a majority of the mitochondria, and the smaller, unassociated sperm cell (S_ua) receives the plastids.     

Cell repair through cell fusion in the red algaGriffithsia pacifica

Summary When an intercalary shoot cell of the red algaGriffithsia pacifica is killed, the cell may be replaced through the wound-healing process of cell repair. During cell repair the cells on either side of the dead cell cut off new cells towards the dead cell. The superjacent cell produces a rhizoid; the subjacent cell produces an atypical shoot cell. The two new cells grow towards each other through the lumen of the dead cell. When they meet, they fuse; the resulting cell expands laterally to fill the cavity of the dead cell and is transformed into a typical intercalary shoot cell, morphologically and physiologically indistinguishable from the killed cell it replaces. The entire cell repair process takes 24–30 hours. Three aspects of cell repair suggest that intercellular communication occurs across the dead cell; these are a precocious division of the cell below the dead cell, a reversible change in the morphology and growth of the shoot cell which participates in repair, and a definite attraction between the two cells which fuse. Thus during cell repair we find evidence not only for cellular redifferentiation through cell fusion, but also for extracellular substances which change pathways of morphogenesis.     

水蕨颈卵器的形成与发育

主要运用电子透射显微镜技术对水蕨(Ceratopteris thalictroides(L.)Brongn)颈卵器形成与发育进行了研究。结果表明:水蕨颈卵器是由原叶体分生组织内颈卵器原始细胞形成的。该原始细胞经2次分裂形成3层细胞,上下两层发育成颈卵器颈部与底部的壁细胞,中层为初生细胞。初生细胞是颈卵器内雌配子发生的第一个细胞,该细胞经2次不等分裂形成1个卵细胞,1个腹沟细胞、1个双核的颈沟细胞。本研究首次阐明了水蕨颈卵器内细胞的发育顺序和特征。     

Bot1p is required for mitochondrial translation, respiratory function, and normal cell morphology in the fission yeast Schizosaccharomyces pombe

Maintenance of cell morphology is essential for normal cell function. For eukaryotic cells, a growing body of recent evidence highlights a close interdependence between mitochondrial function, the cytoskeleton, and cell cycle control mechanisms; however, the molecular details of this interconnection are still not completely understood. We have identified a novel protein, Bot1p, in the fission yeast Schizosaccharomyces pombe. The bot1 gene is essential for cell viability. bot1Delta mutant cells expressing lower levels of Bot1p display altered cell size and cell morphology and a disrupted actin cytoskeleton. Bot1p localizes to the mitochondria in live cells and cofractionates with purified mitochondrial ribosomes. Reduced levels of Bot1p lead to mitochondrial fragmentation, decreased mitochondrial protein translation, and a corresponding decrease in cell respiration. Overexpression of Bot1p results in cell cycle delay, with increased cell size and cell length and enhanced cell respiration rate. Our results show that Bot1p has a novel function in the control of cell respiration by acting on the mitochondrial protein synthesis machinery. Our observations also indicate that in fission yeast, alterations of mitochondrial function are linked to changes in cell cycle and cell morphology control mechanisms.     

Phenotypic heterogeneity in cultured skin fibroblasts from patients with disorders of peroxisome biogenesis belonging to the same complementation group

We have studied fibroblast cell lines derived from a control subject (cell line 85AD5035F) and three patients clinically described as having the Zellweger syndrome (cell line W78/515), the infantile form of Refsum disease (cell line BOV84AD) and hyperpipecolic acidaemia (cell line GM3605), respectively. The mutant cell lines belonged to the same complementation group. The fibroblasts were cultured under identical conditions and were harvested at different time intervals after reaching confluece. Several peroxisomal parameters were determined. In agreement with previous reports, a lowered enzymic activity of acyl-CoA:dihydroxyacetonephosphate acyltransferase and a decrease in latent catalase clearly distinguished the patient cell limes from the control cell line. However, the cell lines exhibited a phenotypic heterogeneity. This was most strikingly encountered when cells were processed for indirect immunofluorescence microscopy and stained with anti-(catalase). The control cells exhibited a punctate fluorescence, which is indicative of the presence of catalase in peroxisomes. In the mutant cell line W78.515 a diffuse fluorescence was observed, indicative of the presence of catalase in the cytosol. In the other two mutant cell lines a puncate fluorescence was observed in some of the cells. Moreover, clear differences in the extent of proteolytic processing of acyl-CoA oxidase were detected. The mutant cell line BOV84AD displayed a control-like pattern with all molecular forms of acyl-CoA oxidase (72, 52 and 20 kDa) present, whereas in the W78/515 cell line only the 72 kDa component could be visualised. The GM3605 cell line was intermediate in this respect.     

Ion channels and apoptosis in cancer

Humans maintain a constant cell number throughout their lifespan. This equilibrium of cell number is accomplished when cell proliferation and cell death are kept balanced, achieving a steady-state cell number. Abnormalities in cell growth or cell death can lead to an overabundance of cells known as neoplasm or tumours. While the perception of cancer is often that of an uncontrollable rate of cell growth or increased proliferation, a decrease in cell death can also lead to tumour formation. Most cells when detached from their normal tissue die. However, cancer cells evade cell death, tipping the balance to an overabundance of cell number. Therefore, overcoming this resistance to cell death is a decisive factor in the treatment of cancer. Ion channels play a critical role in cancer in regards to cell proliferation, malignant angiogenesis, migration and metastasis. Additionally, ion channels are also known to be critical components of apoptosis. In this review, we discuss the modes of cell death focusing on the ability of cancer cells to evade apoptosis. Specifically, we focus on the role ion channels play in controlling and regulating life/death decisions and how they can be used to overcome resistance to apoptosis in the treatment of cancer.     

Hybrid cellular automaton modeling of nutrient modulated cell growth in tissue engineering constructs

Mathematic models help interpret experimental results and accelerate tissue engineering developments. We develop in this paper a hybrid cellular automata model that combines the differential nutrient transport equation to investigate the nutrient limited cell construct development for cartilage tissue engineering. Individual cell behaviors of migration, contact inhibition and cell collision, coupled with the cell proliferation regulated by oxygen concentration were carefully studied. Simplified two-dimensional simulations were performed. Using this model, we investigated the influence of cell migration speed on the overall cell growth within in vitro cell scaffolds. It was found that intense cell motility can enhance initial cell growth rates. However, since cell growth is also significantly modulated by the nutrient contents, intense cell motility with conventional uniform cell seeding method may lead to declined cell growth in the final time because concentrated cell population has been growing around the scaffold periphery to block the nutrient transport from outside culture media. Therefore, homogeneous cell seeding may not be a good way of gaining large and uniform cell densities for the final results. We then compared cell growth in scaffolds with various seeding modes, and proposed a seeding mode with cells initially residing in the middle area of the scaffold that may efficiently reduce the nutrient blockage and result in a better cell amount and uniform cell distribution for tissue engineering construct developments.     

miR-148a promoted cell proliferation by targeting p27 in gastric cancer cells

Accumulating evidence has shown that miRNAs are aberrantly expressed in human gastric cancer and crucial to tumorigenesis. Herein, we identified the role of miR-148a in gastric cell proliferation. miR-148a knockdown inhibited cell proliferation in gastric cancer cell lines. Conversely, miR-148a overexpression promoted cell proliferation and cell cycle progression. p27, a key inhibitor of cell cycle, was verified as the target of miR-148a, indicating miR-148a might downregulate p27 expression to promote gastric cell proliferation. Moreover, we confirmed that miR-148a expression was frequently and dramatically downregulated in human advanced gastric cancer tissues, and observed a good inverse correlation between miR-148a and p27 expression in tumor samples. Thus, our results demonstrated that miR-148a downregulation might exert some sort of antagonistic function in cell proliferation, rather than promote cell proliferation in gastric cancer.     

Identification of a transitional cell state in the developmental pathway to carrot somatic embryogenesis

We have located a novel carbohydrate epitope in the cell walls of certain single cells in embryogenic, but not in non-embryogenic, suspension cultures of carrot. Expression of this epitope, recognized by the mAb JIM8, is regulated during initiation, proliferation, and prolonged growth of suspension cultures such that changes in the abundance of JIM8-reactive cells always precede equivalent changes in embryogenic potential. Therefore, a direct correlation exists between the presence of the JIM8-reactive cell wall epitope and somatic embryo formation. The JIM8-reactive cell wall epitope is expressed in the cell walls of three types of single cells and one type of cell cluster. One of the single cell types seems able to follow one of two phytohormone-controlled developmental pathways, either a cell elongation pathway that eventually leads to cell death, or a cell division pathway that gives rise to proembryogenic masses. We demonstrate that all JIM8-reactive cell types in embryogenic carrot suspension cultures are developmentally related, and that the switch by one of them to somatic embryogenesis is accompanied by the immediate dissipation of the JIM8-reactive cell wall epitope. The cell wall carbohydrate epitope recognized by JIM8 therefore represents a cell wall marker for a very early transitional cell state in the developmental pathway to carrot somatic embryogenesis.     

Asymmetric cell division as a route to reduction in cell length and change in cell morphology in trypanosomes

African trypanosomes go through at least five developmental stages during their life cycle. The different cellular forms are classified using morphology, including the order of the nucleus, flagellum and kinetoplast along the anterior-posterior axis of the cell, the predominant cell surface molecules and the location within the host. Here, an asymmetrical cell division cycle that is an integral part of the Trypanosoma brucei life cycle has been characterised in further detail through the use of cell cycle stage specific markers. The cell cycle leading to the asymmetric division includes an exquisitely synchronised mitosis and exchange in relative location of organelles along the anterior-posterior axis of the cell. These events are coupled to a change in cell surface architecture. During the asymmetric division, the behaviour of the new flagellum is consistent with a role in determining the location of the plane of cell division, a function previously characterised in procyclic cells. Thus, the asymmetric cell division cycle provides a mechanism for a change in cell morphology and also an explanation for how a reduction in cell length can occur in a cell shaped by a stable microtubule array.