Determining the environment of the ligand binding pocket of the human angiotensin II type I (hAT1) receptor using the methionine proximity assay

The peptide hormone angiotensin II (AngII) binds to the AT0 (angiotensin type 1) receptor within the transmembrane domains in an extended conformation, and its C-terminal residue interacts with transmembrane domain VII at Phe-293/Asn-294. The molecular environment of this binding pocket remains to be elucidated. The preferential binding of benzophenone photolabels to methionine residues in the target structure has enabled us to design an experimental approach called the methionine proximity assay, which is based on systematic mutagenesis and photolabeling to determine the molecular environment of this binding pocket. A series of 44 transmembrane domain III, VI, and VII X --> Met mutants photolabeled either with 125I-[Sar1,p'-benzoyl-L-Phe8]AngII or with 125I-[Sar1,p'-methoxy-p'-benzoyl-L-Phe8]AngII were purified and digested with cyanogen bromide. Several mutants produced digestion patterns different from that observed with wild type human AT1, indicating that they had a new receptor contact with position 8 of AngII. The following residues form this binding pocket: L112M and Y113M in transmembrane domain (TMD) III; F249M, W253M, H256M, and T260M in TMD VI; and F293M, N294M, N295M, C296M, and L297M in TMD VII. Homology modeling and incorporation of these contacts allowed us to develop an evidence-based molecular model of interactions with human AT1 that is very similar to the rhodopsin-retinal interaction.     

Determination of peptide contact points in the human angiotensin II type I receptor (AT1) with photosensitive analogs of angiotensin II

To identify ligand-binding domains of Angiotensin II (AngII) type 1 receptor (AT1), two different radiolabeled photoreactive AngII analogs were prepared by replacing either the first or the last amino acid of the octapeptide by p-benzoyl-L-phenylalanine (Bpa). High yield, specific labeling of the AT1 receptor was obtained with the 125I-[Sar1,Bpa8]AngII analog. Digestion of the covalent 125I-[Sar1,Bpa8]AngII-AT1 complex with V8 protease generated two major fragments of 15.8 kDa and 17.8 kDa, as determined by SDS-PAGE. Treatment of the [Sar1,Bpa8]AngII-AT1 complex with cyanogen bromide produced a major fragment of 7.5 kDa which, upon further digestion with endoproteinase Lys-C, generated a fragment of 3.6 kDa. Since the 7.5-kDa fragment was sensitive to hydrolysis by 2-nitro-5-thiocyanobenzoic acid, we circumscribed the labeling site of 125I-[Sar1,Bpa8]AngII within amino acids 285 and 295 of the AT1 receptor. When the AT1 receptor was photolabeled with 125I-[Bpa1]AngII, a poor incorporation yield was obtained. Cleavage of the labeled receptor with endoproteinase Lys-C produced a glycopeptide of 31 kDa, which upon deglycosylation showed an apparent molecular mass of 7.5 kDa, delimiting the labeling site of 125I-[Bpa1]AngII within amino acids 147 and 199 of the AT1 receptor. CNBr digestion of the hAT1 I165M mutant receptor narrowed down the labeling site to the fragment 166-199. Taken together, these results indicate that the seventh transmembrane domain of the AT1 receptor interacts strongly with the C-terminal amino acid of [Sar1, Bpa8]AngII interacts with the second extracellular loop of the AT1 receptor.     

Temperature-dependent variations of ligand-receptor contact points in hAT(1).

Photoaffinity labelling is regularly used to investigate proteins, including peptidergic G protein-coupled receptors (GPCR). To this purpose benzophenone photolabels have been widely used to identify many contact residues in ligand-binding pockets. The three-dimensional binding environment of the human angiotensin II type 1 receptor hAT(1) has been determined using an iterative methionine mutagenesis strategy based on the photochemical properties and preferential incorporation of benzophenone onto methionine. This has led to the construction of a ligand-bound receptor structure. The present study investigated the effect of temperature on the accessibility of some of these contact points. The hAT(1) receptor and two representative Met mutants (H256M-hAT(1) and F293M-hAT(1)) from the iterative mutagenesis study were photolabelled with the benzophenone-ligand (125)I-[Sar(1), Bpa(8)]AngII at temperatures ranging from - 15 degrees C to 37 degrees C. Labelled receptors were partially purified and digested with cyanogen bromide to identify the contact points or segments. There were no changes in receptor contacts or labelling in the 7th transmembrane domains (TMD) of hAT(1) and F293M-hAT(1) across the temperature range. However, a temperature-dependent change in the ligand-receptor contact of H256M-hAT(1) was observed. At - 15 degrees C, H256M labelling was identical to that of hAT(1), indicating that the interaction was specific to the 7th TMD. Significant labelling changes were observed at higher temperatures and at 37 degrees C labelling occurred almost exclusively at mutated residue H256M-hAT(1) in the 6th TMD. Simultaneous competitive labelling of different areas of this target protein indicated that the ligand-receptor structure became increasingly fluctual at physiological temperatures, while a more compact, low mobility, and low energy conformation prevailed at low temperatures.     

The active and the inactive form of the hAT1 receptor have an identical ligand-binding environment: an MPA study on a constitutively active angiotensin II receptor mutant

Several models of activation mechanisms were proposed for G protein-coupled receptors (GPCRs), yet no direct methods exist for their elucidation. The availability of constitutively active mutants has given an opportunity to study active receptor conformations within acceptable limits using models such as the angiotensin II type 1 (AT1)1 receptor mutant N111G-hAT1 which displays an important constitutive activity. Recently, by using methionine proximity assay, we showed for the hAT1 receptor that TMD III, VI, and VII form the ligand-binding pocket of the C-terminal amino acid of an antagonistic AngII analogue. In the present contribution, we investigated whether the same residues would also constitute the ligand-binding contacts in constitutively activated mutant (CAM) receptors. For this purpose, the same Met mutagenesis strategy was carried out on the N111G double mutants. Analysis of 43 receptors mutants in the N111G-hAT1 series, photolabeled and CNBr digested, showed that there were only subtle structural changes between the wt-receptor and its constitutively active form.     

Photolabeling identifies position 172 of the human AT(1) receptor as a ligand contact point: receptor-bound angiotensin II adopts an extended structure

An angiotensin II (AngII) peptidic analogue in which the third residue (valine) was substituted with the photoreactive p-benzoyl-L-phenylalanine (Bpa) was used to identify ligand-binding sites of the human AT(1) receptor. High-affinity binding of the analogue, (125)I-[Bpa(3)]AngII, to the AT(1) receptor heterologously expressed in COS-7 cells enabled us to efficiently photolabel the receptor. Chemical and enzymatic digestions of the (125)I-[Bpa(3)]AngII-AT(1) complex were performed, and receptor fragments were analyzed in order to define the region of the receptor with which the ligand interacts. Results show that CNBr hydrolysis of the photolabeled receptor gave a glycosylated fragment which, after PNGase-F digestion, migrated as a 11.4 kDa fragment, circumscribing the labeled domain between residues 143-243 of the AT(1) receptor. Digestion of the receptor-ligand complex with Endo Lys-C or trypsin followed by PNGase-F treatment yielded fragments of 7 and 4 kDa, defining the labeling site of (125)I-[Bpa(3)]AngII within residues 168-199 of the AT(1) receptor. Photolabeling of three mutant receptors in which selected residues adjacent to residue 168 were replaced by methionine within the 168-199 fragment (I172M, T175M, and I177M) followed by CNBr cleavage revealed that the bound photoligand (125)I-[Bpa(3)]AngII forms a covalent bond with the side chain of Met(172) of the second extracellular loop of the AT(1) receptor. These data coupled with previously obtained results enable us to propose a model whereby AngII adopts an extended beta-strand conformation when bound to the receptor and would orient itself within the binding domain by having its N-terminal portion interacting with the second extracellular loop and its C-terminus interacting with residues of the seventh transmembrane domain.     

The Active and the Inactive Form of the hAT1 Receptor Have an Identical Ligand-Binding Environment: An MPA Study on a Constitutively Active Angiotensin II Receptor Mutant

Several models of activation mechanisms were proposed for G protein-coupled receptors (GPCRs), yet no direct methods exist for their elucidation. The availability of constitutively active mutants has given an opportunity to study active receptor conformations within acceptable limits using models such as the angiotensin II type 1 (AT₁)¹ receptor mutant N111G-hAT₁ which displays an important constitutive activity. Recently, by using methionine proximity assay, we showed for the hAT₁ receptor that TMD III, VI, and VII form the ligand-binding pocket of the C-terminal amino acid of an antagonistic AngII analogue. In the present contribution, we investigated whether the same residues would also constitute the ligand-binding contacts in constitutively activated mutant (CAM) receptors. For this purpose, the same Met mutagenesis strategy was carried out on the N111G double mutants. Analysis of 43 receptors mutants in the N111G-hAT₁ series, photolabeled and CNBr digested, showed that there were only subtle structural changes between the wt-receptor and its constitutively active form.     

Identification of structural determinants for G protein-independent activation of mitogen-activated protein kinases in the seventh transmembrane domain of the angiotensin II type 1 receptor

Although the intrareceptor mechanisms whereby the angiotensin II (AngII) type 1 receptor activates phospholipase C (PLC) have been extensively investigated, analogous studies of signaling through mitogen-activated protein kinases (MAPK) have been lacking. We investigated MAPK activation and traditional G(q)/PLC signaling in transfected cells using AngII and the signaling selective agonist [Sar(1),Ile(4),Ile(8)] AngII (SII). SII stimulated MAPK without inositol trisphosphate (IP(3)) production and thereby stabilizes an activated receptor state linked to G protein-independent MAPK signaling. Using receptor mutagenesis, we focused on the seventh transmembrane domain and identified three key residues-Tyr(292), Phe(293), and Thr(287). At least three distinct activated states were revealed: 1) an AngII-stabilized state linked to G(q)/PLC signaling, 2) an AngII-stabilized state connected to G protein-independent MAPK activation, and 3) a SII-stabilized state associated with G protein-independent MAPK signaling. The mutant Y292F failed to exhibit AngII-induced IP(3) turnover yet remained capable of AngII-induced MAPK activation. SII failed to stimulate MAPK in Y292F-transfected cells. Thus, Tyr(292) is a key epitope for activated states 1 and 3 but not required for activated state 2. Although the F293L mutant retained normal AngII responses, it also showed an IP(3) response to SII, indicating that Phe(293) may be involved in constraining the receptor to its inactive state. Mutations of Thr(287) abolished all SII-induced signaling without affecting any AngII responses. Thr(287) therefore represents a key residue for a SII-stabilized activated state. Taken together, the data identified a novel structural requirement (Thr(287)) for the SII-stabilized activated state and redefined the mechanistic roles for Tyr(292) and Phe(293).     

Photoaffinity labeling demonstrates physical contact between vasoactive intestinal peptide and the N-terminal ectodomain of the human VPAC1 receptor

Vasoactive intestinal peptide (VIP) is a prominent neuropeptide whose actions are mediated by VPAC receptors belonging to class II G protein-coupled receptors. To identify contact sites between VIP and its VPAC1 receptor, an analog of VIP substituted with a photoreactive para-benzoyl-l-Phe (Bpa) at position 22 has been synthesized and evaluated in Chinese hamster ovary cells stably expressing the recombinant human receptor. Bpa22-VIP and native VIP are equipotent in stimulating adenylyl cyclase activity in cell membranes. Cyanogen bromide cleavage of the covalent 125I-[Bpa22-VIP]-hVPAC1R complex yielded a single labeled fragment of 30 kDa that shifted to 11 after deglycosylation, most consistent with the 67-137 fragment of the receptor N-terminal ectodomain. Further cleavage of this fragment with V8 endoproteinase and creation of receptor mutants with new CNBr cleavage sites (XàMet), demonstrated that 125I-[Bpa22-VIP] was covalently attached to the short receptor 109-120 fragment (GWTHLEPGPYPI). In a three-dimensional model of the receptor N-terminal ectodomain, this fragment is located on one edge of the putative VIP binding groove and encompasses several amino acids previously shown to be crucial for VIP binding (reviewed in Laburthe, M., Couvineau, A., and Marie, J. C. (2002) Receptors Channels 8, 137-153). Our data provide the first direct evidence for a physical contact between VIP and the N-terminal ectodomain of the hVPAC1 receptor.     

Structure of the high-affinity binding site for noncompetitive blockers of the acetylcholine receptor: [3H]chlorpromazine labels homologous residues in the beta and delta chains

The membrane-bound acetylcholine receptor from Torpedo marmorata was photolabeled by the noncompetitive channel blocker [3H]chlorpromazine under equilibrium conditions in the presence of the agonist carbamoylcholine. The amount of radioactivity incorporated into all subunits was reduced by addition of phencyclidine, a specific ligand for the high-affinity site for noncompetitive blockers. The labeled beta chain was purified and digested with trypsin or CNBr, and the resulting fragments were fractionated by high-performance liquid chromatography. Sequence analysis resulted in the identification of Ser-254 and Leu-257 as residues labeled by [3H]chlorpromazine in a phencyclidine-sensitive manner. These residues are located in the hydrophobic and potentially transmembrane segment M II of the beta chain, a region homologous to that containing the chlorpromazine-labeled Ser-262 in the delta chain [Giraudat, J., Dennis, M., Heidmann, T., Chang, J. Y., & Changeux, J.-P. (1986) Proc. Natl. Acad. Sci. U.S.A. 83, 2719-2723]. These results show that homologous regions of different receptor subunits contribute to the unique high-affinity site for noncompetitive blockers, a finding consistent with the location of this site on the axis of symmetry of the receptor molecule.     

Mapping of the localization of type 1 angiotensin receptor in membrane microdomains using bioluminescence resonance energy transfer-based sensors

Initiation and termination of signaling of the type I angiotensin receptor (AT(1)-R) can lead to dynamic changes in its localization in plasma membrane microdomains. Several markers were recently developed to investigate membrane microdomains. Here, we used several YFP-labeled fusion constructs (i.e. raft or non-raft plasma membrane markers) to analyze the agonist-induced changes in compartmentalization of AT(1)-R, including internalization or lateral movement between plasma membrane compartments in response to stimulation using bioluminescence resonance energy transfer measurements. Our data demonstrate that angiotensin II (AngII) stimulus changes the microdomain localization of wild type or mutated (DRY → AAY or TSTS → AAAA) AT(1)-Rs co-expressed with the fluorescent probes in HEK293 cells. The comparison of the trafficking of AT(1)-R upon AngII stimulus with those of [Sar(1),Ile(8)]AngII or [Sar(1),Ile(4),Ile(8)]AngII stimulus revealed different types of changes, depending on the nature of the ligand. The observed changes in receptor compartmentalization of the AT(1)-R are strikingly different from those of 5HT-2C and EGF receptors, which demonstrate the usefulness of the bioluminescence resonance energy transfer-based measurements in the investigation of receptor trafficking in the plasma membrane in living cell experiments.     

Molecular cloning of a ferret angiotensin II AT(1) receptor reveals the importance of position 163 for Losartan binding

A complementary DNA for the angiotensin II (AngII) type 1 (AT(1)) receptor from Mustela putorius furo (ferret) was isolated from a ferret atria cDNA library. The cDNA encodes a protein (fAT(1)) of 359 amino acids having high homologies (93-99%) to other mammalian AT(1) receptor counterparts. When fAT(1) was expressed in COS-7 cells and photoaffinity labeled with the photoactive analogue (125)I-?Sar(1), Bpa(8)AngII, a protein of 100 kDa was detected by autoradiography. The formation of this complex was specific since it was abolished in the presence of the AT(1) non-peptidic antagonist L-158,809. Functional analysis indicated that the fAT(1) receptor efficiently coupled to phospholipase C as demonstrated by an increase in inositol phosphate production following stimulation with AngII. Binding studies revealed that the fAT(1) receptor had a high affinity for the peptide antagonist ?Sar(1), Ile(8)AngII (K(d) of 5. 8+/-1.4 nM) but a low affinity for the AT(1) selective non-peptidic antagonist DuP 753 (K(d) of 91+/-15.6 nM). Interestingly, when we substituted Thr(163) with an Ala residue, which occupies this position in many mammalian AT(1) receptors, we restored the high affinity of this receptor for Dup 753 (11.7+/-5.13 nM). These results suggest that position 163 of the AT(1) receptor does not contribute to the overall binding of peptidic ligands but that certain non-peptidic antagonists such as Dup 753 are clearly dependent on this position for efficient binding.     

Identification of amino acid residues photolabeled with 2-azido[alpha-32P]adenosine diphosphate in the beta subunit of beef heart mitochondrial F1-ATPase

When beef heart mitochondrial F1-ATPase is photoirradiated in the presence of 2-azido[alpha-32P]adenosine diphosphate, the beta subunit of the enzyme is preferentially photolabeled [Dalbon, P., Boulay, F., & Vignais, P. V. (1985) FEBS Lett. 180, 212-218]. The site of photolabeling of the beta subunit has been explored. After cyanogen bromide cleavage of the photolabeled beta subunit, only the peptide fragment extending from Gln-293 to Met-358 was found to be labeled. This peptide was isolated and digested by trypsin or Staphylococcus aureus V8 protease. Digestion by trypsin yielded four peptides, one of which spanned residues Ala-338-Arg-356 and contained all the bound radioactivity. When trypsin was replaced by V8 protease, a single peptide spanning residues Leu-342-Met-358 was labeled. Edman degradation of the two labeled peptides showed that radioactivity was localized on the following four amino acids: Leu-342, Ile-344, Tyr-345, and Pro-346.     

Agonist-induced phosphorylation of the angiotensin II (AT(1A)) receptor requires generation of a conformation that is distinct from the inositol phosphate-signaling state

G protein-coupled receptors are thought to isomerize between distinct inactive and active conformations, an idea supported by receptor mutations that induce constitutive (agonist-independent) activation. The agonist-promoted active state initiates signaling and, presumably, is then phosphorylated and internalized to terminate the signal. In this study, we examined the phosphorylation and internalization of wild type and constitutively active mutants (N111A and N111G) of the type 1 (AT(1A)) angiotensin II receptor. Cells expressing these receptors were stimulated with angiotensin II (AngII) and [Sar(1),Ile(4),Ile(8)]AngII, an analog that only activates signaling through the constitutive receptors. Wild type AT(1A) receptors displayed a basal level of phosphorylation, which was stimulated by AngII. Unexpectedly, the constitutively active AT(1A) receptors did not exhibit an increase in basal phosphorylation nor was phosphorylation enhanced by AngII stimulation. Phosphorylation of the constitutively active receptors was unaffected by pretreatment with the non-peptide AT(1) receptor inverse agonist, EXP3174, and was not stimulated by the selective ligand, [Sar(1),Ile(4),Ile(8)]AngII. Paradoxically, [Sar(1),Ile(4), Ile(8)]AngII produced a robust ( approximately 85% of AngII), dose-dependent phosphorylation of the wild type AT(1A) receptor at sites in the carboxyl terminus similar to those phosphorylated by AngII. Moreover, internalization of both wild type and constitutive receptors was induced by AngII, but not [Sar(1),Ile(4),Ile(8)]AngII, providing a differentiation between the phosphorylated and internalized states. These data suggest that the AT(1A) receptor can attain a conformation for phosphorylation without going through the conformation required for inositol phosphate signaling and provide evidence for a transition of the receptor through multiple states, each associated with separate stages of receptor activation and regulation. Separate transition states may be a common paradigm for G protein-coupled receptors.     

Amino acid sequences of portions of the alpha and beta chains of bovine fibrinogen.

The N-terminal portions of the Aα and Bβ chains of bovine fibrinogen (CNBr Aα and Bβ), each of which contains an ArgGly bond that is hydrolyzed by thrombin, have been isolated by cyanogen bromide cleavage of fibrinogen and column chromatography of the resulting material. These peptides were digested with thrombin, releasing fibrinopeptide A and GlyProArg from CNBr Aα, and fibrinopeptide B from CNBr Bβ. The C-terminal peptides produced by digestion with thrombin (CNBr α and CNBr β) were purified, and the amino acid sequences of portions of these peptides (30 residues from the N-terminus of CNBr α and 32 residues from the N-terminus of CNBr β) were determined with an automatic sequenator using the Edman degradation.     

Mapping the bimolecular interface of the parathyroid hormone (PTH)-PTH1 receptor complex: spatial proximity between Lys(27) (of the hormone principal binding domain) and leu(261) (of the first extracellular loop) of the human PTH1 receptor

In an effort to characterize the bimolecular interface between parathyroid hormone (PTH) and its human receptor PTH1-Rc (hPTH1-Rc), we previously identified two contact sites in the receptor: one for position 1 and another for position 13 (located at the ends of the principal activation domain) in PTH(1-34). The present study reports a third, novel "contact site" between hPTH1-Rc and Lys(27) of PTH(1-34). Lys(27) is located in the principal binding domain of the hormone (residues 25-34). The photoreactive PTH(1-34) analogue K27 contains a benzophenone (BP) moiety on Lys(27). The analogue binds to stably transfected HEK 293/C-21 cells (which express a high level of recombinant hPTH1-Rc) and stimulates adenylyl cyclase activity with a potency similar to PTH(1-34). In addition, (125)I-K27 cross-links effectively and specifically to the hPTH1-Rc. Enzymatic (Glu-C and Lys-C) and chemical (CNBr and BNPS-skatole) digestions of the photoconjugate between (125)I-K27 and hPTH1-Rc were performed. In addition, photoconjugates involving the bioactive mutants [L261M]- and [R262K]-hPTH1-Rc, transiently expressed in COS-7 cells, were also digested. The data obtained clearly identify L(261) or R(262) of the first extracellular loop of hPTH1-Rc as the contact site for Lys(27) in the hormone. On the basis of (i) the similarity in molecular mass between the CNBr digest of the (125)I-K27-[L261M]hPTH1-Rc conjugate and free (125)I-K27 and (ii) the failure to cross-link (125)I-K27 to a bioactive mutant receptor [L261A]hPTH1-Rc, we conclude that L(261) is the cross-linking site. These results provide the first demonstration of an interaction between the principal binding domain of PTH and the first extracellular loop of hPTH1-Rc. Revealing proximity of Lys(27) (in PTH) to L(261) (in hPTH1-Rc) provides additional insight into the nature of the ligand-receptor bimolecular interface and clearly illustrates that the extracellular loops of the receptor contribute to the specificity of the PTH-PTH1-Rc interaction. Taken together with previous studies, the new findings add important constraints on the possible positioning of the C-terminal helix of PTH (which contains the principal binding domain) relative to the first extracellular loop and the distal C-terminal helix of the large extracellular amino terminal domain of the PTH1-Rc.     

Mutagenesis of the AT1 receptor reveals different binding modes of angiotensin II and [Sar1]-angiotensin II

Homology modeling of the structure of the AT1 receptor, based on the high resolution rhodopsin crystal structure, indicated that it is unlikely that the binding of AngII to AT1 involves simultaneously all the receptor's residues reported in the literature to participate in this process. Site-directed mutagenesis using Ala substitution of charged residues Lys20, Arg23, Glu91 and Arg93 was performed to evaluate the participation of their side-chains in ligand binding and in triggering the cell's response. A comparative analysis by competition binding and functional assays using angiotensin II and the analog [Sar1]-angiotensin II suggests an important role for Arg23 of AT1 receptor in binding of the natural agonist. It is discussed whether some receptor's residues participate directly in the binding with AngII or whether they are part of a regulatory site.     

Angiotensin II is bound to both receptors AT1 and AT2, parallel to the transmembrane domains and in an extended form

We have applied photoaffinity labelling methods combined with site-directed mutagenesis towards the two principal angiotensin II (AnglI) receptors AT1 and AT2 in order to determine contact points between AngII and the two receptors. We have first identified the receptor contact points between an N- and a C-terminal residue of the AngII molecule and the AT1 receptor and constructed with this stereochemical restriction a molecular model of AT1. A similar approach with a modified procedure of photoaffinity labelling has allowed us now to determine contact points also in the AT2 receptor. Molecular modelling of AT2 on the rhodopsin scaffold and energy minimisation of AngII binding into this AT2 model produced a model strikingly similar to the AT11 structure. Superposition of the experimentally obtained contact points of AngII with AT2 upon this model revealed excellent congruence between the experimental and modelling results. Conclusions: (i) athough AT1 and AT2 have quite low sequence homology, they both bind AngII with similar affinity and in an almost identical fashion, as if the ligand dictates the way it has to be bound, and (ii) in its bound form, AngII adopts an extended conformation in both AT1 and AT2, contrary to all previous predictions.     

Role of N-glycosylation in the expression and functional properties of human AT1 receptor.

The role of N-glycosylation in the pharmacological properties and cell surface expression of AT1 receptor was evaluated. Using site-directed mutagenesis, we substituted both separately and simultaneously the asparagine residues in all three putative N-linked glycosylation consensus sequences (N-X-S/T) of AT1 receptor (positions 4, 176, and 188) with aspartic acid. Expression of these mutant receptors in COS-7 cells followed by photolabeling with [125I]-[p-benzoyl-Phe8]AngII and SDS-PAGE revealed ligand-receptor complexes of four different molecular sizes, indicating that the three N-glycosylation sites are actually occupied by oligosaccharides. Binding studies showed that the affinity of each mutant receptor for [Sar1,Ile8]Ang II was not significantly different from that of wild-type AT1 receptor. Moreover, the functional properties of all mutant receptors were unaffected as evaluated by inositol phosphate production. However, the expression levels of the aglycosylated mutant were 5-fold lower than that of the wild-type AT1 receptor. Use of green fluorescent protein-AT1 receptor fusion proteins in studying the cellular location of the aglycosylated mutant demonstrated that it was distributed at a much higher density to the ER-Golgi complex than to the plasma membrane in HEK 293 cells. Together, these results suggest an important role of N-glycosylation in the proper trafficking of AT1 receptor to the plasma membrane.     

Direct identification of human oxytocin receptor-binding domains using a photoactivatable cyclic peptide antagonist: comparison with the human V1a vasopressin receptor

Understanding of the molecular determinants responsible for antagonist binding to the oxytocin receptor should provide important insights that facilitate rational design of potential therapeutic agents for the treatment of preterm labor. To study ligand/receptor interactions, we used a novel photosensitive radioiodinated antagonist of the human oxytocin receptor, d(CH(2))(5) [Tyr(Me)(2),Thr(4),Orn(8),Phe(3(125)I,4N(3))-NH(2)9]vasotocin. This ligand had an equivalent high affinity for human oxytocin and V(1a) vasopressin receptors expressed in Chinese hamster ovary cells. Taking advantage of this dual specificity, we conducted photoaffinity labeling experiments on both receptors. Photolabeled oxytocin and V(1a) receptors appeared as a unique protein band at 70-75 kDa and two labeled protein bands at 85-90 and 46 kDa, respectively. To identify contact sites between the antagonist and the receptors, the labeled 70-75- and the 46-kDa proteins were cleaved with CNBr and digested with Lys-C and Arg-C endoproteinases. The fragmentation patterns allowed the identification of a covalently labeled region in the oxytocin receptor transmembrane domain III consisting of the residues Leu(114)-Val(115)-Lys(116). Analysis of contact sites in the V(1a) receptor led to the identification of the homologous region consisting of the residues Val(126)-Val(127)-Lys(128). Binding domains were confirmed by mutation of several CNBr cleavage sites in the oxytocin receptor and of one Lys-C cleavage site in the V(1a) receptor. The results are in agreement with previous experimental data and three-dimensional models of agonist and antagonist binding to members of the oxytocin/vasopressin receptor family.     

A very short peptide makes a voltage-dependent ion channel: the critical length of the channel domain of colicin E1

Cleavage of colicin E1 molecules with a variety of proteases or with cyanogen bromide (CNBr) generates COOH-terminal fragments which have channel-forming activity similar to that of intact colicin in planar lipid bilayer membranes. The smallest channel-forming fragment obtained by CNBr cleavage of the wild-type molecule consists of the C-terminal 152 amino acids. By the use of oligonucleotide-directed mutagenesis, we have made nine mutants along this 152 amino acid peptide, in which an amino acid was replaced by methionine in order to create a new CNBr cleavage site. The smallest of the CNBr-cleaved C-terminal fragments with channel-forming activity, in planar bilayer membranes, was generated by cleavage at new Met position 428 and has 94 amino acids, whereas a 75 amino acid peptide produced by cleavage of a new Met at position 447 did not have channel activity. The NH2-terminus of the channel-forming domain of colicin E1 appears therefore to lie between residues 428 and 447. Since, however, the last six C-terminal residues of the colicin can be removed without changing activity, the number of amino acids necessary to form the channel is 88 or less. In addition, the unique Cys residue in colicin E1 was replaced by Gly, and nine mutants were then made with Cys placed at sequential locations along the peptide for eventual use as sulfhydryl attachment sites to determine the local environment of the replaced amino acid. In the course of making 21 mutants, eight charged residues have been replaced by uncharged Met or Cys without changing the biological activity of the intact molecule. It has been proposed previously that the conformation of the colicin E1 channel is a barrel formed from five or six alpha-helices, each having 20 amino acids spanning the membrane and two to four residues making the turn at the boundary of the membrane. Our finding that 88 amino acids can make an active channel, combined with recently reported stoichiometric evidence that the channel is a monomer excludes this model and adds significant constraints which can be used in building a molecular model of the channel.