Purification and characterization of a high-thermostable β-xylanase from newly isolated Thermomyces lanuginosus THKU-49

Highly thermostable β-xylanase produced by newly isolated Thermomyces lanuginosus THKU-49 strain was purified in a four-step procedure involving ammonium sulfate precipitation and subsequent separation on a DEAE-Sepharose fast flow column, hydroxylapatite column, and Sephadex G-100 column, respectively. The enzyme purified to homogeneity had a specific activity of 552 U/mg protein and a molecular weight of 24.9 kDa. The optimal temperature of the purified xylanase was 70°C, and it was stable at temperatures up to 60°C at pH 6.0; the optimal pH was 5.0–7.0, and it was stable in the pH range 3.5–8.0 at 4°C. Xylanase activity was inhibited by Mn²⁺, Sn²⁺, and ethylenediaminetetraacetic acid. The xylanase showed a high activity towards soluble oat spelt xylan, but it exhibited low activity towards insoluble oat spelt xylan; no activity was found to carboxymethylcellulose, avicel, filter paper, locust bean gum, cassava starch, and p-nitrophenyl β-d-xylopyranoside. The apparent K _m value of the xylanase on soluble oat spelt xylan and insoluble oat spelt xylan was 7.3 ± 0.236 and 60.2 ± 6.788 mg/ml, respectively. Thin-layer chromatography analysis showed that the xylanase hydrolyzed oat spelt xylan to yield mainly xylobiose and xylose as end products, but that it could not release xylose from the substrate xylobiose, suggesting that it is an endo-xylanase.     

A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-β-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml⁻¹) was achieved in a 3.7–l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85°C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting ~100% of the initial activity after incubation at 80°C for 60 min and >87% of activity at 90°C for 10 min. The half lives of XYL10C at 80 and 85°C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5–5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5−6.0 for 1 h. The enzyme was resistant to Co²⁺, Mn²⁺, Cr³⁺ and Ag⁺. The specific activity of XYL10C for oat spelt xylan was 18,831 U mg⁻¹. It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.     

Identification and characterization of a novel xylanase derived from a rice straw degrading enrichment culture

A metagenomic library containing ca. 3.06 × 10⁸ bp insert DNA was constructed from a rice straw degrading enrichment culture. A xylanase gene, umxyn10A, was cloned by screening the library for xylanase activity. The encoded enzyme Umxyn10A showed 58% identity and 73% similarity with a xylanase from Thermobifida fusca YX. Sequence analyses showed that Umxyn10A contained a glycosyl hydrolase family 10 catalytic domain. The gene was expressed in Escherichia coli, and the recombinant enzyme was purified and characterized biochemically. Recombinant Umxyn10A was highly active toward xylan. However, the purified enzyme could slightly hydrolyze β-1,3/4-glucan and β-1,3/6-glucan. Umxyn10A displayed maximal activity toward oat spelt xylan at a high temperature (75°C) and weak acidity (pH 6.5). The K _m and V _max of Umxyn10A toward oat spelt xylan were 3.2 mg ml⁻¹ and 0.22 mmol min⁻¹ mg⁻¹ and were 2.7 mg ml⁻¹ and 1.0 mmol min⁻¹ mg⁻¹ against birchwood xylan, respectively. Metal ions did not appear to be required for the catalytic activity of this enzyme. The enzyme Umxyn10A could efficiently hydrolyze birchwood xylan to release xylobiose as the major product and a negligible amount of xylose. The xylanase identified in this work may have potential application in producing xylobiose from xylan.     

Cloning,purification and characterization of an alkali-stable endoxylanase from thermophilic <Emphasis Type="Italic">Geobacillus</Emphasis> sp. 71

The gene encoding a xylanase from Geobacillus sp. 71 was isolated, cloned, and sequenced. Purification of the Geobacillus sp 7.1 xylanase, XyzGeo71, following overexpression in E. coli produced an enzyme of 47 kDa with an optimum temperature of 75°C. The optimum pH of the enzyme is 8.0, but it is active over a broad pH range. This protein showed the highest sequence identity (93%) with the xylanase from Geobacillus thermodenitrificans NG80-2. XyzGeo71 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10). XyzGeo71 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 7.0 to 11.0 for 6 h. Its activity was partially inhibited by Al³⁺ and Cu²⁺ but strongly inhibited by Hg²⁺. The enzyme follows Michaelis–Menten kinetics, with K_m and V_max values of 0.425 mg xylan/ml and 500 μmol/min.mg, respectively. The enzyme was free from cellulase activity and degraded xylan in an endo fashion. The action of the enzyme on oat spelt xylan produced xylobiose and xylotetrose.     

Purification of the alkaliphilic xylanases from Myceliophthora sp. IMI 387099 using cellulose-binding domain as an affinity tag

Ten xylanase isoforms produced by Myceliophthora sp. were characterized for their ability to bind to avicel. Three of the xylanases showing differential affinity for avicel were purified by column chromatography. The purified xylanase Xyl IIa, IIb and IIc showed molecular mass of 47, 41 and 30 kDa and pI of ∼3.5, 4.8 and 5.2, respectively. Xyl IIa was optimally active at pH 8.0 and temperature 70 °C, while Xyl IIb and IIc were optimally active at pH 9.0 and 60 °C and 7.0 and 80 °C, respectively. Xyl IIa and Xyl IIb showed higher stability under alkaline conditions (pH 9.0) and retained 80% of the original activity upto 1 h and 3 h respectively, at 50 °C. All three purified iso-xylanases showed enhanced activities in presence of Na⁺, Mg²⁺, Mn²⁺ and K⁺ ions, whereas, Zn²⁺ and Cu²⁺ showed negative effect on Xyl IIa. The activity of Xyl IIa increased in presence of reducing agents DTT and mercaptoethanol, however, SDS showed inhibitory effect. Kinetic studies showed that Xyl IIb and IIc degrade rye arabinoxylan, much more efficiently than oat spelt xylan, whereas, Xyl IIa showed much higher Kcat/Km value for birch wood xylan as compared to oat spelt xylan. The purified xylanases were apparently classified in family 10.     

Characterization of a thermostable and alkaline xylanase from Bacillus sp. and its bleaching impact on wheat straw pulp

Delignification efficacy of xylanases to facilitate the consequent chemical bleaching of Kraft pulps has been studied widely. In this work, an alkaline and thermally stable cellulase-less xylanase, derived from a xylanolytic Bacillus subtilis, has been purified by a combination of gel filtration and Q-Sepharose chromatography to its homogeneity. Molecular weight of the purified xylanase was 61 kDa by SDS–PAGE. The purified enzyme revealed an optimum assay temperature and pH of 60°C and 8.0, respectively. Xylanase was active in the pH range of 6.0–9.0 and stable up to 70°C. Divalent ions like Ca²⁺, Mg²⁺ and Zn²⁺ enhanced xylanase activity, whereas Hg²⁺, Fe²⁺, and Cu²⁺ were inhibitory to xylanase at 2 mM concentration. It showed K _m and V _max values of 9.5 mg/ml and 53.6 μmol/ml/min, respectively, using birchwood xylan as a substrate. Xylanase exhibited higher values of turn over number (K _cat) and catalytic efficiency (K _cat/K _m) with birchwood xylan than oat spelt xylan. Bleach-boosting enzyme activity at 30 U/g dry pulp displayed the optimum bio-delignification of Kraft pulp resulting in 26.5% reduction in kappa number and 18.5% ISO induction in brightness at 55°C after 3 h treatment. The same treatment improved the pulp properties including tensile strength and burst index, demonstrating its potential application in pre-bleaching of Kraft pulp.     

Purification, characterization and mass spectroscopic analysis of thermo-alkalotolerant ��-1, 4 endoxylanase from Bacillus sp. and its potential for dye decolorization

A Bacillus sp., isolated from sludge and sediments of pulp and paper mill, was found to produce xylanase in a synthetic culture media containing oat spelt xylan (1% w/v) and 10% black liquor as inducers along with 2.5% (w/v) sucrose as additional carbon source. The purified enzyme was highly thermostable with half-life of 10 min at 90 °C and pH 8. The enzyme was stable over a broad range of pH (pH 6-10) and showed good thermal stability when incubated at 70 °C. Chemicals like EDTA, Hg²⁺, Cu²⁺ and solvents like glycerol and acetonitrile completely inhibited enzyme activity at high concentration. The molecular weights of the purified enzyme, determined by matrix-assisted laser desorption/ionization coupled with time-of-flight mass spectrometry (MALDI-TOF/MS) analysis was analogous to the results obtained from SDS-PAGE, i.e. 55 kDa. Kinetic parameters were determined by using oat spelt xylan as substrate. The K_M and V_max values of the enzyme were 4.4 mg/ml and 287 U/mg respectively. At high xylan concentrations (>70 mg/ml) a substrate inhibition phenomenon of the enzyme was observed. In addition, crude xylanase showed enormous potential for decolorization of various recalcitrant dyes.     

Molecular cloning and characterization of the novel acidic xylanase XYLD from Bispora sp. MEY-1 that is homologous to family 30 glycosyl hydrolases

We cloned and sequenced a xylanase gene named xylD from the acidophilic fungus Bispora sp. MEY-1 and expressed the gene in Pichia pastoris. The 1,422-bp full-length complementary DNA fragment encoded a 457-amino acid xylanase with a calculated molecular mass of 49.8 kDa. The mature protein of XYLD showed high sequence similarity to both glycosyl hydrolase (GH) families 5 and 30 but was more homologous to members of GH 30 based on phylogenetic analysis. XYLD shared the highest identity (49.9%) with a putative endo-1,6-β-d-glucanase from Talaromyces stipitatus and exhibited 21.1% identity and 34.3% similarity to the well-characterized GH family 5 xylanase from Erwinia chrysanthemi. Purified recombinant XYLD showed maximal activity at pH 3.0 and 60 °C, maintained more than 60% of maximal activity when assayed at pH 1.5–4.0, and had good thermal stability at 60 °C and remained stable at pH 1.0–6.0. The enzyme activity was enhanced in the presence of Ni²⁺ and β-mercaptoethanol and inhibited by some metal irons (Hg²⁺, Cu²⁺, Pb²⁺, Mn²⁺, Li⁺, and Fe³⁺) and sodium dodecyl sulfate. The specific activity of XYLD for beechwood xylan, birchwood xylan, 4-O-methyl-d-glucuronoxylan, and oat spelt xylan was 2,463, 2,144, 2,020, and 1,429 U mg⁻¹, respectively. The apparent K _m and V _max values for beechwood xylan were 5.6 mg ml⁻¹ and 3,622 μmol min⁻¹ mg⁻¹, respectively. The hydrolysis products of different xylans were mainly xylose and xylobiose.     

Cloning,expression and characterization of a novel acidic xylanase,XYL11B,from the acidophilic fungus Bispora sp. MEY-1

A xylanase gene (xyl11B) was cloned from Bispora sp. MEY-1 and expressed in Pichia pastoris. xyl11B, with a 66-bp intron, encodes a mature protein of 219 residues with highest identity (57.1%) to the Trichoderma reesei xylanase of glycoside hydrolase family 11. The purified recombinant XYL11B was acidophilic, exhibiting maximum activity at pH 2.6 and 65 °C. The enzyme was also thermostable, pH stable, and was highly resistant to both pepsin and trypsin, suggesting good performance in the digestive tract as a feed supplement to improve animal nutrition. The activity of XYL11B was enhanced by most metal ions but was inhibited weakly by Hg²⁺, Pb²⁺and Cu²⁺, which strongly inhibit many other xylanases. The specific activity of XYL11B for oat spelt xylan substrate was 2049 U mg^?1. The main hydrolysis products of xylan were xylose and xylobiose.     

Purification and characterization of endoxylanase Xln-1 from <Emphasis Type="Italic">Aspergillus niger</Emphasis> B03

An extracellular endoxylanase was isolated from the xylanolytic complex of Aspergillus niger B03. The enzyme was purified to a homogenous form using consecutive ultrafiltration and anion exchange chromatography. The endoxylanase was a monomer protein with a molecular weight of 33,000 Da determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and 34,000 Da determined by gel filtration. The optimal pH and temperature values for the enzyme action were 6.0 and 60°C, respectively. Endoxylanase was stable at 40°C, pH 7.0 for 210 min. The thermal stability of the enzyme was significantly increased in the presence of glycerol and sorbitol. The enzyme activity was inhibited by Cu²⁺, Fe²⁺, Fe³⁺, and Ag¹⁺, and it was activated by Mn²⁺. The substrate specificity and kinetic parameters of the enzyme were determined with different types of xylans. Endoxylanase displayed maximum activity in the case of oat spelt xylan, with an apparent K _m value of 8.19 mg/ml. The substrate specificity and the product profile of the enzyme suggested it to be an endoxylanase.     

Purification and characterization of a high molecular weight endoxylanase from the solid-state culture of an alkali-tolerant Aspergillus fumigatus MKU1

Summary A high molecular weight endoxylanase (XylF2) from the solid state culture of Aspergillus fumigatus MKU1 was purified to homogeneity by a combination of tube gel electrophoresis and electroelution methods. The purity was demonstrated by SDS-PAGE and the molecular mass of the XylF2 was found to be 66 kDa. The optimal pH and temperature for activity were 5.0 and 90 °C, respectively. The apparent K _m and V _max values of XylF2 with oat spelt xylan as substrate were 1.6 mg/ml and 3.25 mmol/min/mg protein respectively. The enzyme showed high activity towards oat spelt xylan while negligible activity was observed on carboxymethylcellulose. The activity of XylF2 was strongly inhibited by Hg²⁺, Ni²⁺, Zn²⁺, SDS and N-bromosuccinimide and stimulated by l-cysteine and iodoacetamide. The hydrolysis of oat spelt xylan by XylF2 released only xylo-oligosaccharides.     

Characterization of Xyn10A, a highly active xylanase from the human gut bacterium Bacteroides xylanisolvens XB1A

A xylanase gene xyn10A was isolated from the human gut bacterium Bacteroides xylanisolvens XB1A and the gene product was characterized. Xyn10A is a 40-kDa xylanase composed of a glycoside hydrolase family 10 catalytic domain with a signal peptide. A recombinant His-tagged Xyn10A was produced in Escherichia coli and purified. It was active on oat spelt and birchwood xylans and on wheat arabinoxylans. It cleaved xylotetraose, xylopentaose, and xylohexaose but not xylobiose, clearly indicating that Xyn10A is a xylanase. Surprisingly, it showed a low activity against carboxymethylcellulose but no activity at all against aryl-cellobioside and cellooligosaccharides. The enzyme exhibited K _m and V _max of 1.6 mg ml⁻¹ and 118 μmol min⁻¹ mg⁻¹ on oat spelt xylan, and its optimal temperature and pH for activity were 37°C and pH 6.0, respectively. Its catalytic properties (k _cat/K _m = 3,300 ml mg⁻¹ min⁻¹) suggested that Xyn10A is one of the most active GH10 xylanase described to date. Phylogenetic analyses showed that Xyn10A was closely related to other GH10 xylanases from human Bacteroides. The xyn10A gene was expressed in B. xylanisolvens XB1A cultured with glucose, xylose or xylans, and the protein was associated with the cells. Xyn10A is the first family 10 xylanase characterized from B. xylanisolvens XB1A.     

Production,purification and characterization of <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE7 xylanase and its application in eucalyptus Kraft pulp biobleaching

Production of extracellular xylanase from Bacillus sp. GRE7 using a bench-top bioreactor and solid-state fermentation (SSF) was attempted. SSF using wheat bran as substrate and submerged cultivation using oat-spelt xylan as substrate resulted in an enzyme productivity of 3,950 IU g⁻¹ bran and 180 IU ml⁻¹, respectively. The purified enzyme had an apparent molecular weight of 42 kDa and showed optimum activity at 70°C and pH 7. The enzyme was stable at 60–80°C at pH 7 and pH 5–11 at 37°C. Metal ions Mn²⁺ and Co²⁺ increased activity by twofold, while Cu²⁺ and Fe²⁺ reduced activity by fivefold as compared to the control. At 60°C and pH 6, the K _m for oat-spelt xylan was 2.23 mg ml⁻¹ and V _max was 296.8 IU mg⁻¹ protein. In the enzymatic prebleaching of eucalyptus Kraft pulp, the release of chromophores, formation of reducing sugars and brightness was higher while the Kappa number was lower than the control with increased enzyme dosage at 30% reduction of the original chlorine dioxide usage. The thermostability, alkali-tolerance, negligible presence of cellulolytic activity, ability to improve brightness and capacity to reduce chlorine dioxide usage demonstrates the high potential of the enzyme for application in the biobleaching of Kraft pulp.     

Cloning and enzymatic characterization of a xylanase gene from a soil-derived metagenomic library with an efficient approach

Screening interesting biocatalysts directly from soil samples is a more convenient and applicable approach than conventional cultivation-dependent ones. In our present work, a soil-derived metagenomic library containing 24,000 transformants was constructed with an efficient strategy for cloning xylanase genes. A gene encoding the enzyme (XynH) able to hydrolyze xylan was obtained. Similarity analysis revealed that this enzyme is a new member in the family 10 of xylanases. The molecular mass of XynH purified from Escherichia coli was estimated to be 39 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. It was found to display the maximal activity at lower temperature, under weakly alkaline conditions, different from most of xylanases. The K _m and V_max values of XynH with birchwood xylan as substrate are 7.5 mg/ml and 190 μmol min⁻¹ mg⁻¹, respectively. It is greatly interesting to note that the activity of XynH was not reduced significantly by Mn²⁺, Zn²⁺, Co²⁺, Ag⁺, and Cu²⁺, even at the concentration of 5 mM, which strongly inhibits most of the other xylanases studied previously. Yong Hu and Guimin Zhang contributed equally to this work.     

Identification of a Major Xylanase from <Emphasis Type="Italic">Aspergillus flavus</Emphasis> as a 14-kD Protein

Aspergillus flavus K49 secreted at least two xylanase activities when grown on a medium containing larch (wood) xylan as a sole carbon source. Enzyme activity was assayed using an agar medium containing Remazol Brilliant Blue R conjugated oat spelt xylan as substrate. Crude enzyme preparations were inhibited by Hg⁺², with an ED₅₀ of 17.5 mM and maximum inhibition of 83% at 50 mM. A concentrated sample of A. flavus K49 xylanase preparation was subjected to gel filtration chromatography on a P-30 column. A small protein peak coinciding with the major peak of xylanase activity was separated from the other secreted fungal proteins. An additional peak of xylanase activity was observed in fractions containing multiple fungal proteins. Analysis by denaturing sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) of fractions containing the smaller molecular weight xylanase revealed a major and minor protein band in the vicinity of 14 kD. Analysis of these same fractions by acidic native PAGE revealed a single band. Confirmation of identity for the isolated xylanase was provided by isolation of a protein band from a SDS–PAGE gel, followed by trypsin digestion/analysis by tandem mass spectrometry. Comparison of the peptide library derived from this protein band with sequence data from the A. oryzae genomic data base provided a solid match with an endo-1,4-β-xylanase, XlnA. This identification is consistent with a low molecular weight protein associated with the major xylanolytic activity. XlnA may be a highly mobile (diffusible), plant wall hemicellulose degrading factor with significant activity during plant infection.     

Purification and partial characterisation of a thermostable xylanase from salt-tolerant Thermobifida halotolerans YIM 90462T

ThxynA, an extracellular xylanase of T. halotolerans YIM 90462^T, was purified to homogeneity from a fermentation broth by ultra-filtration, ammonium sulphate precipitation, hydrophobic chromatography and ion exchange chromatography. The purified xylanase has a molecular mass of 24 kDa and is optimally active at 80 °C and pH 6.0. The enzyme is stable over a broad pH range (pH 6.0–10.0) and shows good thermal stability when incubated at 70 °C for 1 h. The K_m and V_max values of the enzyme are 11.6 mg/mL and 434 μmol mg^?1 min^?1, respectively, using oat spelt xylan as a substrate. Moreover, the enzyme seemingly has both xylanase activity and cellulase activity. These unique properties suggest that it may be useful for industrial applications.     

A novel cold-active xylanase from the cellulolytic myxobacterium Sorangium cellulosum So9733-1: gene cloning, expression, and enzymatic characterization

The cellulolytic myxobacterium Sorangium cellulosum is able to efficiently degrade many kinds of polysaccharides, but none of the enzymes involved have been characterized. In this paper, a xylanase gene (xynA) was cloned from S. cellulosum So9733-1 using thermal asymmetric interlaced PCR. The gene is composed of 1,209 bp and has only 52.27% G + C content, which is much lower than that of most myxobacterial DNA reported (67–72%). Gene xynA encodes a 402 amino acid protein that contains a single catalytic domain belonging to the glycoside hydrolase family 10. The novel xylanase gene, xynA, was expressed in Escherichia coli BL21 (DE3) and the recombinant protein (r-XynA) was purified by Ni-affinity chromatography. The r-XynA had the optimum temperature of 30–35°C and exhibited 33.3% activity at 5°C and 13.7% activity at 0°C. Approximately 80% activity was lost after 20-min pre-incubation at 50°C. These results indicate that r-XynA is a cold-active xylanase with low thermostability. At 30°C, the K _m values of r-XynA on beechwood xylan, birchwood xylan, and oat spelt xylan were 25.77 ± 4.16, 26.52 ± 4.78, and 38.13 ± 5.35 mg/mL, respectively. The purified r-XynA displayed optimum activity at pH 7.0. The activity of r-XynA was enhanced by the presence of Ca²⁺. The r-XynA hydrolyzed beechwood xylan, birchwood xylan, and xylooligosaccharides (xylotriose, xylotetraose, and xylopentose) to produce primarily xylose and xylobiose. To our knowledge, this is the first report on the characterization of a xylanase from S. cellulosum.     

Production of alkaliphilic, halotolerent, thermostable cellulase free xylanase by Bacillus halodurans PPKS-2 using agro waste: single step purification and characterization

The alkaliphilic Bacillus halodurans strain PPKS-2 was shown to produce extracellular alkaliphilic, thermostable and halotolerent xylanase. The culture conditions for xylanase production were optimized with respect to pH, temperature, NaCl and inexpensive agro waste as substrates. Xylanase yield was enhanced more than four fold in the presence of 1% corn husk and 0.5% peptone or feather hydrolysate at pH 11 and 37°C. Xylanase was purified to 11.8-fold with 8.7% yield by using traditional chromatographic methods whereas the same enzyme purified to 20-fold with 72% yield by using corn husk as ligand. Its molecular mass was estimated to be 24 kDa by SDS–PAGE. The xylanase had maximal activity at pH 11 and 70°C. The enzyme was active over broad range, 0–20% sodium chloride. The enzyme was thermostable retaining 100% of the original activity at 70°C for 3 h. The apparent K _m values for oat spelt xylan and brichwood xylan were 4.1 and 4.4 mg/ml respectively. The deduced internal amino acid sequence of PPKS-2 xylanase resembled the sequence of β-1,4-endoxylanase, which is member of glycoside hydrolase family 11.     

Molecular and biochemical characterization of a new alkaline active multidomain xylanase from alkaline wastewater sludge

A xylanase gene, xyn-b39, coding for a multidomain glycoside hydrolase (GH) family 10 protein was cloned from the genomic DNA of the alkaline wastewater sludge of a paper mill. Its deduced amino acid sequence of 1,481 residues included two carbohydrate-binding modules (CBM) of family CBM_4_9, one catalytic domain of GH 10, one family 9 CBM and three S-layer homology (SLH) domains. xyn-b39 was expressed heterologously in Escherichia coli, and the recombinant enzyme was purified and characterized. Xyn-b39 exhibited maximum activity at pH 7.0 and 60 °C, and remained highly active under alkaline conditions (more than 80 % activity at pH 9.0 and 40 % activity at pH 10.0). The enzyme was thermostable at 55 °C, retaining more than 90 % of the initial activity after 2 h pre-incubation. Xyn-b39 had wide substrate specificity and hydrolyzed soluble substrates (birchwood xylan, beechwood xylan, oat spelt xylan, wheat arabinoxylan) and insoluble substrates (oat spelt xylan and wheat arabinoxylan). Hydrolysis product analysis indicated that Xyn-b39 was an endo-type xylanase. The K _m and V _max values of Xyn-b39 for birchwood xylan were 1.01 mg/mL and 73.53 U/min/mg, respectively. At the charge of 10 U/g reed pulp for 1 h, Xyn-b39 significantly reduced the Kappa number (P < 0.05) with low consumption of chlorine dioxide alone.     

A novel xylanase,XynA4-2, from thermoacidophilic <Emphasis Type="Italic">Alicyclobacillus</Emphasis> sp. A4 with potential applications in the brewing industry

A xylanase gene, xynA4-2, was obtained from the genome sequence of thermoacidophilic Alicyclobacillus sp. A4 and expressed in Escherichia coli BL21 (DE3). xynA4-2 encodes a mature protein of 411 residues with a calculated molecular weight of 46.8 kDa. Based on the amino acid sequence similarities (highest identity of 61%), the enzyme was confined into glycoside hydrolase family 10. The purified recombinant XynA4-2 exhibited maximum activity at pH 6.2 and 55°C. The enzyme was stable over a broad pH range, retaining more than 90% of the original activity at pH 5.8–12.0, 37°C for 1 h. The substrate specificity of XynA4-2 was relatively narrow, exhibiting 100, 93, and 35% of the relative activity towards birchwood xylan, oat spelt xylan, and wheat arabinoxylan, respectively. Supplementation of XynA4-2 to mash caused the reduction of mash filtration rate (5.6%) and viscosity (4.0%). When combined with the commercial glucanase from Sunson, higher reduction was detected in the filtration rate (12.0%) and viscosity (17.2%). These favorable properties make XynA4-2 a good candidate in the brewing industry.