模拟微重力条件下心肌细胞的体外三维固定化培养

观察心肌细胞体外培养形成三维(3D)组织结构的能力和过程及心肌细胞在模拟微重力状态下的3D固定化培养效果。应用酶消化法从新生的乳鼠心室肌组织获取心肌细胞,以Cytodex3为心肌细胞的3D固定化培养载体,将心肌细胞固定化培养于Spinnerflask中,用扫描电镜观察心肌细胞体外培养形成的3D组织结构;以心肌细胞的代谢效率和细胞搏动强度为观察指标,比较心肌细胞在Spinnerflask及HARV(highaspectratevessel)生物反应器中3D固定化培养的差异。结果显示,心肌细胞不仅能贴附于Cytodex3上生长,且形成了具有同步自律收缩的3D组织样结构;心肌细胞在两种不同培养体系中的细胞接种效率和细胞形态没有明显差异,培养于HARV中的心肌细胞的代谢效率和细胞搏动强度均明显高于Spinnerflask培养体系。体外培养的乳鼠心肌细胞具有形成同步自律收缩的3D组织结构的能力;模拟微重力的培养环境有利于改善心肌细胞3D组织样培养物的代谢和功能 。     

以胶原膜为支架的心肌细胞体外三维培养

将从新生乳鼠心室肌组织获取的心肌细胞接种于鼠尾胶原膜三维支架和组织培养板,以细胞形态、细胞搏动、葡萄糖比消耗率(q_glu)、乳酸比产率(q_lac)、乳酸转化率(Y_lac/glu)、肌酸激酶及乳酸脱氢酶的活力为观察指标,比较心肌细胞在鼠尾胶原膜中三维(3D)培养和组织培养板中二维(2D)培养的差异。培养于鼠尾胶原膜的乳鼠心肌细胞在第5天形成闰盘连接,形成面积约为80mm³、肉眼可见自律性同步收缩的心肌细胞3D培养物。3D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.37 μmol/10.6cells/d、2.92 μmol/106cells/d和0.38 μmol/μmol;2D培养体系中乳鼠心肌细胞的q_glu、q_lac和Y_lac/glu的均值分别为7.59 μmol/10.6cells/d、3.83 μmol/10.6cells/d和 0.51 μmol/μmol。两种培养体系中乳鼠心肌细胞的肌酸激酶及乳酸脱氢酶的活力无明显差别。实验结果表明：培养于鼠尾胶原膜的心肌细胞保持正常心肌细胞的代谢活力和收缩功能。     

细胞外间质-整合素在牵张刺激心肌细胞肥大中的作用

应用牵张刺激培养细胞的模型 ,观察胶原、纤维连接蛋白、层粘连素对牵张刺激心肌细胞肥大的影响 ,探讨细胞外间质 -整合素受体在超负荷心肌肥大的跨膜信号传导机制中的作用。结果发现 ,胶原、纤维连接蛋白、层粘连素明显有助于培养心肌细胞的贴壁、伸展。牵张刺激后 ,胶原、纤维连接蛋白基质组心肌细胞的 3H -亮氨酸掺入率和心肌细胞表面积均显著大于对照组 ,而层粘连素组无显著变化 ;可溶性纤维连接蛋白、RGD肽均可显著抑制牵张刺激诱导的培养心肌细胞 (胶原为粘附基质 )的3H -亮氨酸掺入率升高和心肌细胞表面积增大 ,而层粘连素无明显作用。结果表明 ,特异的细胞外间质 -整合素在超负荷心肌肥大机制中发挥了跨膜信号传导作用。     

模拟微重力效应对心肌细胞一氧化氮水平的影响及其相关机制的研究

空间微重力导致的心肌收缩功能下降是航天医学的重要问题, 其发生机制尚不清楚. 采用电子自旋共振(ESR)、免疫细胞化学和核酸原位杂交等技术研究了模拟微重力效应对心肌细胞一氧化氮(NO)水平、诱导型一氧化氮合成酶(iNOS)表达的影响及其调控的信号转导途径, 以探讨模拟微重力影响心肌细胞收缩功能的可能机制. 结果表明, 模拟微重力导致心肌细胞NO水平增高, iNOS蛋白及其mRNA表达上调; 非选择性的蛋白激酶抑制剂staurosporine和选择性的蛋白激酶C ( PKC )抑制剂calphostin C均可显著抑制模拟微重力下心肌细胞NO水平增高, 说明模拟微重力对iNOS表达的调节至少是部分地依赖于PKC途径. 结果提示, 心肌细胞NO途径对模拟微重力条件敏感, 该途径可能在模拟微重力影响心肌细胞收缩功能的机制中发挥重要作用.     

槲皮素对模拟微重力条件下体外培养大鼠心肌细胞骨架的影响

采用细胞免疫双荧光染色观察离体培养的大鼠心肌细胞微丝和微管分布 ,探讨模拟微重力条件下槲皮素对心肌细胞骨架分布的影响。结果表明 :模拟微重力条件下心肌细胞微丝、微管在近胞核区的分布增多 ;模拟微重力处理的同时加入槲皮素 ,则使近胞核处微丝、微管分布明显减少 ,微丝束的粗细与对照组无异。提示模拟微重力可显著影响心肌细胞微丝、微管的分布 ,槲皮素可对抗该效应而发挥其心肌细胞保护作用 [动物学报49(1) :98～ 10 3 ,2 0 0 3]。     

过度训练对心肌间质胶原、心肌舒缩性能和AngⅡ变化的研究

目的为了研究和探讨过度训练对心肌间质胶原的重塑及其与心肌舒缩性能和AngⅡ变化的关系.方法在SD大鼠过度训练模型上对心肌间质胶原形态结构,心肌胶原含量,心肌局部与循环血中血管紧张素Ⅱ(AngⅡ)含量以及心肌收缩和舒张性能等指标进行了观察测试与分析.结果过度训练导致心肌束之间,心肌细胞之间,尤其是心肌细胞膜上大量胶原纤维过度增粗并成束成网分布,心肌细胞被增粗的胶原纤维网包裹.一般训练组与对照组比较,心室系数、心肌胶原含量以及心肌局部与循环中AngⅡ等指标均显著性增加P＜0.01).过度训练组与对照组及一般训练组比较,上述诸指标均有显著性变化.心肌舒缩性能指标测试表明,一般训练组与对照组比较,±dp/dtmax和±d2p/dt2max均显著性升高,T值缩短;而过度训练组上述诸指标则显著性降低,T值延长,与一般训练组比较具有显著性差异.结论过度训练导致心肌间质胶原过度增生,心肌收缩与舒张功能受损,心肌间质胶原与心肌舒缩功能和AngⅡ关系密切.     

细胞外间质-整合素在牵张刺激心肌细胞肥大中的作用

应用牵张刺激培养细胞的模型,观察原原、纤维连接蛋白、层粘连素对牵张刺激心肌细胞肥大的影响,探讨细胞外间质－融洽纱受体在超负荷心肌肥大的跨膜信号传导机制中的作用。发现,胶原、纤维连接蛋白、层粘连素明显有助于培养心肌细胞的贴壁、伸展。牵张刺激后,胶原、纤维连接蛋白基质组心肌细胞的＾３Ｈ－亮氨酸掺入率和心肌细胞表面积均显著大于对照组,而层粘连素组无显著变化;可溶性纤维连接蛋白、ＲＧＤ肽均可显著抑制牵张刺     

pEGFP-N1质粒转染乳鼠心肌细胞的分布及效率

目的: 研究pEGFP-N1质粒转染心肌细胞的分布及效率.方法: 培养乳鼠心肌细胞,根据乳鼠心肌细胞的不同生长时间(1～3 d)进行pEGFP-N1质粒转染心肌细胞的实验研究.结果: 乳鼠心肌细胞生长1 d时,pEGFP-N1质粒转染心肌细胞的效率显著高于乳鼠心肌细胞生长2 d、3 d时;pEGFP-N1质粒转染心肌细胞后EGFP均匀地充满胞浆和胞核.结论: pEGFP-N1质粒转染乳鼠心肌细胞的效率与心肌细胞的生长期有关;EGFP在心肌细胞中均匀分布于胞浆和胞核.     

糖尿病心肌纤维化和肌动蛋白异常表达的研究

目的　研究糖尿病大鼠不同病程心肌纤维化和肌动蛋白含量的变化 ,阐明两者对糖尿病心肌病变发生的作用。方法　 1.制造糖尿病大鼠心肌模型并随机分组。 2 .氯胺T法测定羟脯氨酸含量 ,代表心肌胶原总含量。心肌免疫组织化学染色测定心肌胶原蛋白 (CollagenⅠ、CollagenⅡ )和心肌型α肌动蛋白 (α actin)及转化生长因子β1(TGF β1)。 3.心肌病理改变的光镜和透射电镜观察。结果　糖尿病病程 6个月组心肌胶原总含量明显高于病程 3个月以内组 (P <0 0 1)。病程 3个月之后Ⅰ型胶原蛋白表达伴随TGF β1的表达开始较健康鼠明显增加 (P <0 0 1)。α actin蛋白表达较健康鼠明显减少 (P <0 0 1)。糖尿病鼠心肌可见大量胶原纤维相互连接成网状 ,排列紊乱 ,分布不匀。心肌细胞心肌型α actin蛋白分布不均匀 ,位于心肌线粒体膜处 ,着色呈浅黄色。病程 3个月后大鼠α actin蛋白表达明显减少 ,心肌细胞核皱缩 ,线粒体肿胀 ,在细胞核周围和细胞质内有大量糖原沉积现象。结论　Ⅰ型心肌胶原蛋白大量增加是糖尿病鼠心肌纤维化的主要原因。心肌型actin表达减少 ,心肌细胞核皱缩和线粒体肿胀以及糖原沉积是糖尿病心肌病的病理基础。     

成年大鼠心肌细胞分离和培养相关研究进展

心肌细胞已成为研究心肌结构、代谢、功能、病理生理及其机制的重要工具,是在体心肌模型的重要补充。但是大多数研究用的细胞都来自培养的新生鼠的未成熟心肌细胞,未成熟心肌细胞与成年鼠心肌细胞在形态、结构、功能上存在很大的差异,其实验结论难于推论于成熟心肌细胞。相较于未成熟心肌细胞,成熟心肌细胞的分离和培养相对困难但更有研究价值,怎么分离出高质量的成熟心肌细胞并使其长时间保持活性就成为关键问题。所以,本文将对成年大鼠心肌细胞分离和培养的相关研究进展进行综述。     

Fiber alignment and coculture with fibroblasts improves the differentiated phenotype of murine embryonic stem cell-derived cardiomyocytes for cardiac tissue engineering

Embryonic stem cells (ESCs) are an important source of cardiomyocytes for regenerating injured myocardium. The successful use of ESC-derived cardiomyocytes in cardiac tissue engineering requires an understanding of the important scaffold properties and culture conditions to promote cell attachment, differentiation, organization, and contractile function. The goal of this work was to investigate how scaffold architecture and coculture with fibroblasts influences the differentiated phenotype of murine ESC-derived cardiomyocytes (mESCDCs). Electrospinning was used to process an elastomeric biodegradable polyurethane (PU) into aligned or unaligned fibrous scaffolds. Bioreactor produced mESCDCs were seeded onto the PU scaffolds either on their own or after pre-seeding the scaffolds with mouse embryonic fibroblasts (MEFs). Viable mESCDCs attached to the PU scaffolds and were functionally contractile in all conditions tested. Importantly, the aligned scaffolds led to the anisotropic organization of rod-shaped cells, improved sarcomere organization, and increased mESCDC aspect ratio (length-to-diameter ratio) when compared to cells on the unaligned scaffolds. In addition, pre-seeding the scaffolds with MEFs improved mESCDC sarcomere formation compared to mESCDCs cultured alone. These results suggest that both fiber alignment and pre-treatment of scaffolds with fibroblasts improve the differentiation of mESCDCs and are important parameters for developing engineered myocardial tissue constructs using ESC-derived cardiac cells.     

Composition of cell-polymer cartilage implants

Cartilage implants for potential in vivo use for joint repair or reconstructive surgery can be created in vitro by growing chondrocytes on biodegradable polymer scaffolds. Implants 1 cm in diameter by 0.176 cm thick were made using isolated calf chondrocytes and polyglucolic acid (PGA). By 6 weeks, the total amount of glycosaminoglycan (GAG) and collagen (types I and II) increased to 46% of the implant dry weight; there was a corresponding decrease in the mass of PGA. Implant biochemical and histological compositions depended on initial cell density, scaffold thickness, and the methods of cell seeding and implant culture. Implants seeded at higher initial cell densities reached higher GAG contents (total and per cell), presumably due to cooperative cell-to-cell interactions. Thicker implants had lower GAG and collagen contents due to diffusional limitations.Implants that were seeded and cultured under mixed conditions grew to be thicker and more spatially uniform with respect to the distribution of cells, matrix, and remaining polymer than those seeded and/or cultured statically. Implants from mixed cultures had a 20-40-mum thick superficial zone of flat cells and collagen oriented parallel to the surface and a deep zone with perpendicular columns of cells surrounded by GAG Mixing during cell seeding and culture resulted in a more even cell distribution ad enhanced nutrient diffusion which could be related to a more favorable biomechanical environment for chondrogenesis. Cartilage with appropriate for and function for in vivo implantation ca thus be created by selectively stimulating the growth and differentiated function of chondrocytes (i.e., GAG and collagen synthesis) through optimization of the in vitro culture environment. (c) 1994 John Wiley & Sons, Inc.     

Enhanced cartilage tissue engineering by sequential exposure of chondrocytes to FGF-2 during 2D expansion and BMP-2 during 3D cultivation

Bovine calf articular chondrocytes, either primary or expanded in monolayers (2D) with or without 5 ng/ml fibroblast growth factor-2 (FGF-2), were cultured on three-dimensional (3D) biodegradable polyglycolic acid (PGA) scaffolds with or without 10 ng/ml bone morphogenetic protein-2 (BMP-2). Chondrocytes expanded without FGF-2 exhibited high intensity immunostaining for smooth muscle alpha-actin (SMA) and collagen type I and induced shrinkage of the PGA scaffold, thus resembling contractile fibroblasts. Chondrocytes expanded in the presence of FGF-2 and cultured 6 weeks on PGA scaffolds yielded engineered cartilage with 3.7-fold higher cell number, 4.2-fold higher wet weight, and 2.8-fold higher wet weight glycosaminoglycan (GAG) fraction than chondrocytes expanded without FGF-2. Chondrocytes expanded with FGF-2 and cultured on PGA scaffolds in the presence of BMP-2 for 6 weeks yielded engineered cartilage with similar cellularity and size, 1.5-fold higher wet weight GAG fraction, and more homogenous GAG distribution than the corresponding engineered cartilage cultured without BMP-2. The presence of BMP-2 during 3D culture had no apparent effect on primary chondrocytes or those expanded without FGF-2. In summary, the presence of FGF-2 during 2D expansion reduced chondrocyte expression of fibroblastic molecules and induced responsiveness to BMP-2 during 3D cultivation on PGA scaffolds.     

Tissue engineering of human cartilage in bioreactors using single and composite cell-seeded scaffolds

Chondrocytes isolated from human fetal epiphyseal cartilage were seeded under mixed conditions into 15-mm-diameter polyglycolic acid (PGA) scaffolds and cultured in recirculation column bioreactors to generate cartilage constructs. After seeding, the cell distributions in thick (4.75 mm) and thin (2.15 mm) PGA disks were nonuniform, with higher cell densities accumulating near the top surfaces. Composite scaffolds were developed by suturing together two thin PGA disks after seeding to manipulate the initial cell distribution before bioreactor culture. The effect of medium flow direction in the bioreactors, including periodic reversal of medium flow, was also investigated. The quality of the tissue-engineered cartilage was assessed after 5 weeks of culture in terms of the tissue wet weight, glycosaminoglycan (GAG), total collagen and collagen type II contents, histological analysis of cell, GAG and collagen distributions, and immunohistochemical analysis of collagen types I and II. Significant enhancement in construct quality was achieved using composite scaffolds compared with single PGA disks. Operation of the bioreactors with periodic medium flow reversal instead of unidirectional flow yielded further improvements in tissue weight and GAG and collagen contents with the composite scaffolds. At harvest, the constructs contained GAG concentrations similar to those measured in ex vivo human adult articular cartilage; however, total collagen and collagen type II levels were substantially lower than those in adult tissue. This study demonstrates that the location of regions of high cell density in the scaffold coupled with application of dynamic bioreactor operating conditions has a significant influence on the quality of tissue-engineered cartilage.     

Improved seeding of chondrocytes into polyglycolic acid scaffolds using semi-static and alginate loading methods

Cell seeding and attachment in three-dimensional scaffolds is a key step in tissue engineering with implications for cell differentiation and tissue development. In this work, two new seeding methods were investigated using human chondrocytes and polyglycolic acid (PGA) fibrous mesh scaffolds. A simple semi-static seeding method using culture plates and tissue flasks was developed as an easy-to-perform modification of static seeding. An alginate-loading method was also studied, using alginate hydrogel as an adjuvant for entrapping cells within PGA scaffolds. Both the semi-static and PGA-alginate methods produced more homogeneous cell distributions than conventional static and dynamic seeding. Using 20 × 10(6) cells, whereas the seeding efficiency for static seeding was only 52%, all other techniques produced seeding efficiencies of ≥ 90%. With 40 × 10(6) cells, the efficiency of semi-static seeding declined to 74% while the dynamic and PGA-alginate methods retained their ability to accommodate high cell numbers. The seeded scaffolds were cultured in recirculation bioreactors to determine the effect of seeding method on cartilage production. Statically seeded scaffolds did not survive the 5-week cultivation period. Deposition of extracellular matrix in scaffolds seeded using the semi-static and PGA-alginate methods was more uniform compared with scaffolds seeded using the dynamic method. The new semi-static and PGA-alginate seeding methods developed in this work are recommended for tissue engineering because they provide substantial benefits compared with static seeding in terms of seeding efficiency, cell distribution, and cartilage deposition while remaining simple and easy to execute.     

Liquid perfluorochemical-supported hybrid cell culture system for proliferation of chondrocytes on fibrous polylactide scaffolds

CP5 bovine chondrocytes were cultured on biodegradable electrospun fibrous polylactide (PLA) scaffolds placed on a flexible interface formed between two immiscible liquid phases: (1) hydrophobic perfluorochemical (PFC) and (2) aqueous culture medium, as a new way of cartilage implant development. Robust and intensive growth of CP5 cells was achieved in our hybrid liquid–solid–liquid culture system consisting of the fibrous PLA scaffolds in contrast to limited growth of the CP5 cells in traditional culture system with PLA scaffold placed on solid surface. The multicellular aggregates of CP5 cells covered the surface of PLA scaffolds and the chondrocytes migrated through and overgrew internal fibers of the scaffolds. Our hybrid culture system simultaneously allows the adhesion of adherent CP5 cells to fibers of PLA scaffolds as well as, due to use of phase of PFC, enhances the mass transfer in the case of supplying/removing of respiratory gases, i.e., O₂ and CO₂. Our flexible (independent of vessel shape) system is simple, ready-to-use and may utilize a variety of polymer-based scaffolds traditionally proposed for implant development.     

Optimization of cardiac cell seeding and distribution in 3D porous alginate scaffolds

Cardiac tissue engineering has evolved as a potential therapeutic approach to assist in cardiac regeneration. We have recently shown that tissue-engineered cardiac graft, constructed from cardiomyocytes seeded within an alginate scaffold, is capable of preventing the deterioration in cardiac function after myocardial infarction in rats. The present article addresses cell seeding within porous alginate scaffolds in an attempt to achieve 3D high-density cardiac constructs with a uniform cell distribution. Due to the hydrophilic nature of the alginate scaffold, its >90% porosity and interconnected pore structure, cell seeding onto the scaffold was efficient and short, up to 30 min. Application of a moderate centrifugal force during cell seeding resulted in a uniform cell distribution throughout the alginate scaffolds, consequently enabling the loading of a large number of cells onto the 3D scaffolds. The percent cell yield in the alginate scaffolds ranged between 60-90%, depending on cell density at seeding; it was 90% at seeding densities of up to 1 x 10(8) cells/cm(3) scaffold and decreased to 60% at higher densities. The highly dense cardiac constructs maintained high metabolic activity in culture. Scanning electron microscopy revealed that the cells aggregated within the scaffold pores. Some of the aggregates were contracting spontaneously within the matrix pores. Throughout the culture there was no indication of cardiomyocyte proliferation within the scaffolds, nor was it found in 3D cultures of cardiofibroblasts. This may enable the development of cardiac cocultures, without domination of cardiofibroblasts with time.     

Engineered Smooth Muscle Tissues: Regulating Cell Phenotype with the Scaffold

Culturing cells on three-dimensional, biodegradable scaffolds may create tissues suitable either for reconstructive surgery applications or as novel in vitro model systems. In this study, we have tested the hypothesis that the phenotype of smooth muscle cells (SMCs) in three-dimensional, engineered tissues is regulated by the chemistry of the scaffold material. Specifically, we have directly compared cell growth and patterns of extracellular matrix (ECM) (e.g. , elastin and collagen) gene expression on two types of synthetic polymer scaffolds and type I collagen scaffolds. The growth rates of SMCs on the synthetic polymer scaffolds were significantly higher than on type I collagen sponges. The rate of elastin production by SMCs on polyglycolic acid (PGA) scaffolds was 3.5 +/- 1.1-fold higher than that on type I collagen sponges on Day 11 of culture. In contrast, the collagen production rate on type I collagen sponges was 3.3 +/- 1.1-fold higher than that on PGA scaffolds. This scaffold-dependent switching between elastin and collagen gene expression was confirmed by Northern blot analysis. The finding that the scaffold chemistry regulates the phenotype of SMCs independent of the scaffold physical form was confirmed by culturing SMCs on two-dimensional films of the scaffold materials. It is likely that cells adhere to these scaffolds via different ligands, as the major protein adsorbed from the serum onto synthetic polymers was vitronectin, whereas fibronectin and vitronectin were present at high density on type I collagen sponges. In summary, this study demonstrates that three-dimensional smooth muscle-like tissues can be created by culturing SMCs on three-dimensional scaffolds, and that the phenotype of the SMCs is strongly regulated by the scaffold chemistry. These engineered tissues provide novel, three-dimensional models to study cellular interaction with ECM in vitro.