Affinity and kinetic modulation of polyamide–DNA interactions by N‐modification of the heterocycles

Synthetic N‐methyl imidazole and N‐pyrrole containing polyamides (PAs) that can form “stacked” dimers can be programmed to target and bind to specific DNA sequences and control gene expression. To accomplish this goal, the development of PAs with lower molecular mass which allows for the molecules to rapidly penetrate cells and localize in the nucleus, along with increased water solubility, while maintaining DNA binding sequence specificity and high binding affinity is key. To meet these challenges, six novel f‐ImPy*Im PA derivatives that contain different orthogonally positioned moieties were designed to target 5′‐ACGCGT‐3′. The synthesis and biophysical characterization of six f‐ImPy*Im were determined by CD, ΔT_M, DNase I footprinting, SPR, and ITC studies, and were compared with those of their parent compound, f‐ImPyIm. The results gave evidence for the minor groove binding and selectivity of PAs 1 and 6 for the cognate sequence 5′‐ACGCGT‐3′, and with strong affinity, K_eq = 2.8 × 10⁸ M^?1 and K_eq = 6.2 × 10⁷ M^?1, respectively. The six novel PAs presented in this study demonstrated increased water solubility, while maintaining low molecular mass, sequence specificity, and binding affinity, addressing key issues in therapeutic development. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 497–507, 2013.     

Binding of hairpin pyrrole and imidazole polyamides to DNA: relationship between torsion angle and association rate constants

N-methylpyrrole (Py)-N-methylimidazole (Im) polyamides are small organic molecules that bind to DNA with sequence specificity and can be used as synthetic DNA-binding ligands. In this study, five hairpin eight-ring Py–Im polyamides 1–5 with different number of Im rings were synthesized, and their binding behaviour was investigated with surface plasmon resonance assay. It was found that association rate (k_a) of the Py–Im polyamides with their target DNA decreased with the number of Im in the Py–Im polyamides. The structures of four-ring Py–Im polyamides derived from density functional theory revealed that the dihedral angle of the Py amide carbonyl is 14∼18°, whereas that of the Im is significantly smaller. As the minor groove of DNA has a helical structure, planar Py–Im polyamides need to change their conformation to fit it upon binding to the minor groove. The data explain that an increase in planarity of Py–Im polyamide induced by the incorporation of Im reduces the association rate of Py–Im polyamides. This fundamental knowledge of the binding of Py–Im polyamides to DNA will facilitate the design of hairpin Py–Im polyamides as synthetic DNA-binding modules.     

Sequence-specific DNA binding Pyrrole–imidazole polyamides and their applications

Pyrrole–imidazole polyamides (Py–Im polyamides) are cell-permeable compounds that bind to the minor groove of double-stranded DNA in a sequence-specific manner without causing denaturation of the DNA. These compounds can be used to control gene expression and to stain specific sequences in cells. Here, we review the history, structural variations, and functional investigations of Py–Im polyamides.     

Alternative heterocycles for DNA recognition: a 3-pyrazole/pyrrole pair specifies for G.C base pairs

Synthetic ligands comprising three aromatic amino acids, pyrrole (Py), imidazole (Im), and hydroxypyrrole (Hp), specifically recognize predetermined sequences as side-by-side pairs in the minor groove of DNA. To expand the repertoire of aromatic rings that may be utilized for minor groove recognition, three five-membered heterocyclic rings, 3-pyrazolecarboxylic acid (3-Pz), 4-pyrazolecarboxylic acid (4-Pz), and furan-2-carboxylic acid (Fr), were examined at the N-terminus of eight-ring hairpin polyamide ligands. The DNA binding properties of 3-Pz, 4-Pz, and Fr each paired with Py were studied by quantitative DNase I footprinting titrations on a 283 bp DNA restriction fragment containing four 6-bp binding sites 5'-ATNCCTAA-3' (N = G, C, A, or T; 6-bp polyamide binding site is underlined). The pair 3-Pz/Py has increased binding affinity and sequence specificity for G.C bp compared with Im/Py.     

Orientation preferences of hairpin pyrrole–imidazole polyamides toward mCGG site

Hairpin pyrrole–imidazole (Py-Im) polyamides are promising medium-sized molecules that bind sequence-specifically to the minor groove of B-form DNA. Here, we synthesized a series of hairpin Py-Im polyamides and explored their binding affinities and orientation preferences to methylated DNA with the ^mCGG target sequence. Thermal denaturation assays revealed that the five hairpin Py-Im polyamides, which were anticipated to recognize ^mCGG in a forward orientation, bind to nontarget DNA, GG^mC, in a reverse orientation. Therefore, we designed five Py-Im polyamides that could recognize ^mCGG in a reverse orientation. We found that the two Py-Im polyamides containing Im/β pairs preferentially bound to ^mCGG in a reverse orientation. The reverse binding Py-Im polyamide successfully inhibited TET1 binding on the methylated DNA. Taken together, this study illustrated the importance of designing reverse binding Py-Im polyamides for the target sequence, ^mCGG, which paved the way for Py-Im polyamides that can be used with otherwise difficult to access DNA with CG sequences.     

Oligonucleotide—Minor Groove Binder 1:2 Conjugates: Side by Side Parallel Minor Groove Binder Motif in Stabilization of DNA Duplex

Synthetic polycarboxamides consisting of N‐methylpyrrole (Py), N‐methylimidazole (Im), N‐methyl‐3‐hydroxypyrrole (Hp) and β‐alanine (β) show strong and sequence‐specific interaction with the DNA minor groove when they form hairpin structures with side‐by‐side antiparallel motifs. In the present paper, new conjugates containing two ligands linked to the same terminal phosphate of DNA strand were constructed. The paper describes optimized synthesis and properties of oligonucleotide‐linked polyamide strands that insert into the minor groove of a duplex in a parallel or antiparallel orientation. Strong stabilization of DNA duplexes by two attached minor groove ligands is demonstrated by the thermal denaturation method. The unmodified duplex 5′‐CGTTTATTp‐3′/5′‐AATAAACG‐3′ melts at 20°C. When one tetra(Py) residue was attached to the first strand of this duplex, denaturation temperature was increased to 46°C; attachment of the second tetra(Py) in a parallel orientation resulted in denaturation temperature of 60°C. It is even higher than in case of “classic” octapyrrole hairpin ligand (Tm = 58°C). Sequence‐specific character of stabilization by two conjugated ligands was demonstrated for G:C‐containing oligonucleotides attached to tetracarboxamide and octacarboxamide ligands constructed from Py, Im and β units according to established recognition rules (ΔTm = 20°C). The two‐strand parallel minor groove binder constructions attached to addressing oligonucleotides could be considered as site‐specific ligands recognizing single‐ and double‐stranded DNA similarly to already described hairpin MGB structures with antiparallel orientation of carboxamide units.     

DNA minor-groove recognition by 3-methylthiophene/pyrrole pair

Hairpin polyamides are synthetic oligomers, which fold and bind to specific DNA sequences in a programmable manner. Internal side-by-side pairings of the aromatic amino acid residues 1-methyl-1H-pyrrole (Py), 1-methyl-1H-imidazole (Im), and 3-hydroxy-1-methyl-1H-pyrrole (Hp) confer the ability to distinguish between all four Watson-Crick base pairs in the minor groove of B-form DNA. In a broad search to expand the heterocycle repertoire, we found that when 3-methylthiophene (Tn), which presents a S-atom to the minor groove, is paired with Py, it exhibits a modest threefold specificity for TA>AT presumably by shape-selective recognition. In this study, we explore the scope and limitations of this lead by incorporating multiple Tn residues within a single hairpin polyamide. It was found that hairpin polyamides containing more that one Tn/Py pair exhibit lowered affinities and specificities for their match sites. It appears that little deviation is permissible from the parent five-membered ring 1-methyl-1H-pyrrole-2-carboxamide scaffold for DNA recognition.     

Synthesis and DNA binding properties of 1-(3-aminopropyl)-imidazole-containing triamide f-Im(∗)PyIm: A novel diamino polyamide designed to target 5'-ACGCGT-3'

A novel diamino/dicationic polyamide f-Im(?)PyIm (5) that contains an orthogonally positioned aminopropyl chain on an imidazole (Im(?)) moiety was designed to target 5'-ACGCGT-3'. The DNA binding properties of the diamino polyamide 5, determined by CD, ΔT(M), DNase I footprinting, SPR, and ITC studies, were compared with those of its monoamino/monocationic counterpart f-ImPyIm (1) and its diamino/dicationic isomer f-ImPy(?)Im (2), which has the aminopropyl group attached to the central pyrrole unit (Py(?)). The results gave evidence for the minor groove binding and selectivity of polyamide 5 for the cognate sequence 5'-ACGCGT-3', and with strong affinity (K(eq)=2.3×10(7)M(-1)). However, the binding affinities varied according to the order: f-ImPy(?)Im (2)>f-ImPyIm (1)?f-Im(?)PyIm (5) confirming that the second amino group can improve affinity, but its position within the polyamide can affect affinity.     

Novel diamino imidazole and pyrrole-containing polyamides: Synthesis and DNA binding studies of mono- and diamino-phenyl-ImPy*Im polyamides designed to target 5'-ACGCGT-3'

Pyrrole- and imidazole-containing polyamides are widely investigated as DNA sequence selective binding agents that have potential use as gene control agents. The key challenges that must be overcome to realize this goal is the development of polyamides with low molar mass so the molecules can readily diffuse into cells and concentrate in the nucleus. In addition, the molecules must have appreciable water solubility, bind DNA sequence specifically, and with high affinity. It is on this basis that the orthogonally positioned diamino/dicationic polyamide Ph-ImPy*Im 5 was designed to target the sequence 5'-ACGCGT-3'. Py* denotes the pyrrole unit that contains a N-substituted aminopropyl pendant group. The DNA binding properties of diamino polyamide 5 were determined using a number of techniques including CD, ΔT(M), DNase I footprinting, SPR and ITC studies. The effects of the second amino moiety in Py* on DNA binding affinity over its monoamino counterpart Ph-ImPyIm 3 were assessed by conducting DNA binding studies of 3 in parallel with 5. The results confirmed the minor groove binding and selectivity of both polyamides for the cognate sequence 5'-ACGCGT-3'. The diamino/dicationic polyamide 5 showed enhanced binding affinity and higher solubility in aqueous media over its monoamino/monocationic counterpart Ph-ImPyIm 3. The binding constant of 5, determined from SPR studies, was found to be 1.5 × 10(7)M(-1), which is ～3 times higher than that for its monoamino analog 3 (4.8 × 10(6)M(-1)). The affinity of 5 is now approaching that of the parent compound f-ImPyIm 1 and its diamino equivalent 4. The advantages of the design of diamino polyamide 5 over 1 and 4 are its sequence specificity and the ease of synthesis compared to the N-terminus pyrrole analog 2.     

Structural effects of DNA sequence on T.A recognition by hydroxypyrrole/pyrrole pairs in the minor groove

Synthetic polyamides composed of three types of aromatic amino acids, N-methylimidazole (Im), N-methylpyrrole (Py) and N-methyl-3-hydroxypyrrole (Hp) bind specific DNA sequences as antiparallel dimers in the minor groove. The side-by-side pairings of aromatic rings in the dimer afford a general recognition code that allows all four base-pairs to be distinguished. To examine the structural consequences of changing the DNA sequence context on T.A recognition by Hp/Py pairs in the minor groove, crystal structures of polyamide dimers (ImPyHpPy)(2) and the pyrrole counterpart (ImPyPyPy)(2) bound to the six base-pair target site 5'-AGATCT-3' in a ten base-pair oligonucleotide have been determined to a resolution of 2.27 and 2.15 A, respectively. The structures demonstrate that the principles of Hp/Py recognition of T.A are consistent between different sequence contexts. However, a general structural explanation for the non-additive reduction in binding affinity due to introduction of the hydroxyl group is less clear. Comparison with other polyamide-DNA cocrystal structures reveals structural themes and differences that may relate to sequence preference.     

Recognition of the DNA minor groove by pyrrole-imidazole polyamides: comparison of desmethyl- and N-methylpyrrole

Polyamides consisting of N-methylpyrrole (Py), N-methylimidazole (Im), and N-methyl-3-hydroxypyrrole (Hp) are synthetic ligands that recognize predetermined DNA sequences with affinities and specificities comparable to many DNA-binding proteins. As derivatives of the natural products distamycin and netropsin, Py/Im/Hp polyamides have retained the N-methyl substituent, although structural studies of polyamide:DNA complexes have not revealed an obvious function for the N-methyl. In order to assess the role of the N-methyl moiety in polyamide:DNA recognition, a new monomer, desmethylpyrrole (Ds), where the N-methyl moiety has been replaced with hydrogen, was incorporated into an eight-ring hairpin polyamide by solid-phase synthesis. MPE footprinting, affinity cleavage, and quantitative DNase I footprinting revealed that replacement of each Py residue with Ds resulted in identical binding site size and orientation and similar binding affinity for the six-base-pair (bp) target DNA sequence. Remarkably, the Ds-containing polyamide exhibited an 8-fold loss in specificity for the match site versus a mismatched DNA site, relative to the all-Py parent. Polyamides with Ds exhibit increased water solubility, which may alter the cell membrane permeability properties of the polyamide. The addition of Ds to the repertoire of available monomers may prove useful as polyamides are applied to gene regulation in vivo. However, the benefits of Ds incorporation must be balanced with a potential loss in specificity.     

Comparative analysis of DNA alkylation by conjugates between pyrrole–imidazole hairpin polyamides and chlorambucil or seco-CBI

We investigated sequence-specific DNA alkylation using conjugates between the N-methylpyrrole (Py)-N-methylimidazole (Im) polyamide and the DNA alkylating agent, chlorambucil, or 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI). Polyamide–chlorambucil conjugates 1–4 differed in the position at which the DNA alkylating chlorambucil moiety was bound to the Py–Im polyamide. High-resolution denaturing polyacrylamide gel electrophoresis (PAGE) revealed that chlorambucil conjugates 1–4 alkylated DNA at the sequences recognized by the Py–Im polyamide core moiety. Reactivity and sequence specificity were greatly affected by the conjugation position, which reflects the geometry of the alkylating agent in the DNA minor groove. Polyamide–seco-CBI conjugate 5 was synthesized to compare the efficacy of chlorambucil with that of seco-CBI as an alkylating moiety for Py–Im polyamides. Denaturing PAGE analysis revealed that DNA alkylation activity of polyamide–seco-CBI conjugate 5 was similar to that of polyamide–chlorambucil conjugates 1 and 2. In contrast, the cytotoxicity of conjugate 5 was superior to that of conjugates 1–4. These results suggest that the seco-CBI conjugate was distinctly active in cells compared to the chlorambucil conjugates. These results may contribute to the development of more specific and active DNA alkylating agents.     

Structure of a beta-alanine-linked polyamide bound to a full helical turn of purine tract DNA in the 1:1 motif

Polyamides composed of N-methylpyrrole (Py), N-methylimidazole (Im) and N-methylhydroxypyrrole (Hp) amino acids linked by beta-alanine (beta) bind the minor groove of DNA in 1:1 and 2:1 ligand to DNA stoichiometries. Although the energetics and structure of the 2:1 complex has been explored extensively, there is remarkably less understood about 1:1 recognition beyond the initial studies on netropsin and distamycin. We present here the 1:1 solution structure of ImPy-beta-Im-beta-ImPy-beta-Dp bound in a single orientation to its match site within the DNA duplex 5'-CCAAAGAGAAGCG-3'.5'-CGCTTCTCTTTGG-3' (match site in bold), as determined by 2D (1)H NMR methods. The representative ensemble of 12 conformers has no distance constraint violations greater than 0.13 A and a pairwise RMSD over the binding site of 0.80 A. Intermolecular NOEs place the polyamide deep inside the minor groove, and oriented N-C with the 3'-5' direction of the purine-rich strand. Analysis of the high-resolution structure reveals the ligand bound 1:1 completely within the minor groove for a full turn of the DNA helix. The DNA is B-form (average rise=3.3 A, twist=38 degrees ) with a narrow minor groove closing down to 3.0-4.5 A in the binding site. The ligand and DNA are aligned in register, with each polyamide NH group forming bifurcated hydrogen bonds of similar length to purine N3 and pyrimidine O2 atoms on the floor of the minor groove. Each imidazole group is hydrogen bonded via its N3 atom to its proximal guanine's exocyclic amino group. The important roles of beta-alanine and imidazole for 1:1 binding are discussed.     

Kinetic consequences of covalent linkage of DNA binding polyamides

Polyamides composed of N-methylpyrrole (Py) and N-methylimidazole (Im) subunits can bind in the minor groove of DNA at predetermined sequences with subnanomolar affinity and high specificity. Covalent linkage of polymer subunits using a gamma-aminobutyric acid linker has been shown to increase both the affinity and specificity of polyamides. Using a fluorescence detected stopped-flow assay, we have studied the differences in association and dissociation kinetics of a series of polyamides representing unlinked, hairpin and cyclic analogues of the four ring polyamide ImPyPyPy-beta-Dp. Whereas the large differences seen in the equilibrium association constants between the unlinked and covalently linked polyamides are primarily due to higher association rate constants, discrimination between matched and mismatched sites by each polyamide can be ascribed in large part to differences in their dissociation rate constants. The consequences of this kinetic behavior for future design are discussed.     

Molecular recognition of DNA base pairs by the formamido/pyrrole and formamido/imidazole pairings in stacked polyamides

Polyamides containing an N-terminal formamido (f) group bind to the minor groove of DNA as staggered, antiparallel dimers in a sequence-specific manner. The formamido group increases the affinity and binding site size, and it promotes the molecules to stack in a staggered fashion thereby pairing itself with either a pyrrole (Py) or an imidazole (Im). There has not been a systematic study on the DNA recognition properties of the f/Py and f/Im terminal pairings. These pairings were analyzed here in the context of f-ImPyPy, f-ImPyIm, f-PyPyPy and f-PyPyIm, which contain the central pairing modes, –ImPy– and –PyPy–. The specificity of these triamides towards symmetrical recognition sites allowed for the f/Py and f/Im terminal pairings to be directly compared by SPR, CD and ΔT_M experiments. The f/Py pairing, when placed next to the –ImPy– or –PyPy– central pairings, prefers A/T and T/A base pairs to G/C base pairs, suggesting that f/Py has similar DNA recognition specificity to Py/Py. With –ImPy– central pairings, f/Im prefers C/G base pairs (>10 times) to the other Watson–Crick base pairs; therefore, f/Im behaves like the Py/Im pair. However, the f/Im pairing is not selective for the C/G base pair when placed next to the –PyPy– central pairings.