Enhanced electrochemiluminescence from luminol at carboxyl graphene for detection of α-fetoprotein

In this study, a novel sensitive electrochemiluminescence (ECL) immunosensor was constructed by carboxyl graphene (GR) for enhancing luminol–O₂ system emission. Here, carboxyl GR was used to enhance the ECL intensity of luminol that had excellent electron transfer ability and good solubility. The sensing platform was constructed by depositing carboxyl GR on electrodes and immobilizing antibodies on the surface of carboxyl GR through amidation. The specific immunoreaction between α-fetoprotein (AFP) and antibodies resulted in a decrease of ECL intensity, and the intensity decreased linearly with AFP concentrations in the range of 5 pg ml⁻¹ to 14 ng ml⁻¹ with a detection limit of 2.0 pg ml⁻¹. The proposed immunosensor exhibits high specificity, good reproducibility, and longtime stability. It may become a promising technique for protein detection.     

The development of an electrochemical immunosensor using a thiol aromatic aldehyde and PAMAM-functionalized Fe3O4@Au nanoparticles

In this work, a novel thiol aromatic aldehyde was synthesized. It can be used as a substrate to directly immobilize antibodies on a gold electrode, for which no additional chemical cross-linker is required. It was also applied as a linker to prepare Fe₃O₄@Au/PAMAM/Ab₂–horseradish peroxidase bioconjugates, which introduced multiple enzymes onto a sensing interface owing to the high surface-to-volume ratio of Fe₃O₄@Au nanoparticles and many functional groups of the poly(amidoamine) dendrimer (PAMAM). The introduced multiple enzymes greatly improved the detection signal. Under optimal conditions, the proposed electrochemical immunosensor exhibited desirable performance for detection of IgG in the range 0.005–50 ng ml⁻¹ with a detection limit of 3 pg ml⁻¹ based on a signal-to-noise ratio of 3. It has great potential application in the area of clinical analysis.     

Electrochemical immunosensor for α-fetoprotein detection using ferroferric oxide and horseradish peroxidase as signal amplification labels

An electrochemical immunosensor for quantitative detection of α-fetoprotein (AFP) in human serum was developed using graphene sheets (GS) and thionine (TH) as electrode materials and mesoporous silica nanoparticles (MSNs) loaded with ferroferric oxide (Fe₃O₄) nanoparticles and horseradish peroxidase (HRP) as labels for signal amplification. In this study, the compound of GS and TH (GS–TH) was used as a substrate for promoting electron transfer and immobilization of primary antibody of AFP (Ab₁). MSNs were used as a carrier for immobilization of secondary antibody of AFP (Ab₂), Fe₃O₄, and HRP. The synergistic effect occurred between Fe₃O₄ and HRP and greatly improved the sensitivity of the immunosensor. This method could detect AFP over a wide concentration range from 0.01 to 25 ng ml⁻¹ with a detection limit of 4 pg ml⁻¹. This strategy may find wide potential application in clinical analysis or detection of other tumor markers.     

Graphene oxide supported rhombic dodecahedral Cu2O nanocrystals for the detection of carcinoembryonic antigen

In this work, a simple electrochemical immunosensor was developed for the detection of carcinoembryonic antigen (CEA) based on rhombic dodecahedral Cu₂O nanocrystals–graphene oxide–gold nanoparticles (rCu₂O–GO–AuNPs). GO as the template and surfactant resulting in rCu₂O exhibit improved rhombic dodecahedral structure uniformity and excellent electrochemical performance. Moreover, GO was found to be able to effectively improve the long stability of rCu₂O on the electrode response. Under optimal conditions, the immunosensor showed a low limit of detection (0.004 ng ml⁻¹) and a large linear range (0.01–120 ng ml⁻¹). This work presents a potential alternative for the diagnostic applications of GO-supported special morphology materials in biomedicine and biosensors.     

Label-free electrochemical immunosensor based on Nile blue A-reduced graphene oxide nanocomposites for carcinoembryonic antigen detection

In this article, a novel, label-free, and inherent electroactive redox immunosensor for carcinoembryonic antigen (CEA) based on gold nanoparticles (AuNPs) and Nile blue A (NB) hybridized electrochemically reduced graphene oxide (NB–ERGO) is proposed. The composite of NB–graphene oxide (NB–GO) was prepared by π–π stacking interaction. Then, chronoamperometry was adopted to simultaneously reduce HAuCl₄ and nanocomposites of NB–GO for synthesizing AuNPs/NB–ERGO. The immunosensor was fabricated by capturing CEA antibody (anti-CEA) at this nanocomposite modified electrode. The immunosensor determination was based on the fact that, due to the formation of antigen–antibody immunocomplex, the decreased response currents of NB were directly proportional to the concentrations of CEA. Under optimal conditions, the linear range of the proposed immunosensor was estimated to be from 0.001 to 40 ng ml⁻¹ and the detection limit was estimated to be 0.00045 ng ml⁻¹. The proposed immunosensor was used to determine CEA in clinical serum samples with satisfactory results. The proposed method may provide promising potential application in clinical immunoassays with the properties of facile procedure, stability, high sensitivity, and selectivity.     

Direct immobilization of antibodies on a new polymer film for fabricating an electrochemical impedance immunosensor

A new polymer bearing aldehyde groups was designed and synthesized by grafting 4-pyridinecarboxaldehyde onto poly(epichlorohydrin). Antibodies can be directly immobilized on the surface of the polymer film through the covalent bonding of aldehyde groups of the film with amino groups of antibodies. In this study, human immunoglobulin G (IgG) was used as a model analyte for the fabrication of an electrochemical impedance immunosensor. Using the proposed immunosensor, IgG in the range from 0.1 to 80 ng ml⁻¹ was detected with a detection limit of 0.07 ng ml⁻¹ (signal/noise [S/N] = 3). In addition, the electrochemical impedance immunosensor displays good stability and reproducibility.     

Horseradish peroxidase functionalized gold nanorods as a label for sensitive electrochemical detection of alpha-fetoprotein antigen

In this study, a novel tracer, horseradish peroxidase (HRP) functionalized gold nanorods (Au NRs) nanocomposites (HRP–Au NRs), was designed to label the signal antibodies for sensitive electrochemical measurement of alpha-fetoprotein (AFP). The preparation of HRP–Au NRs nanocomposites and the labeling of secondary antibody (Ab₂) were performed by one-pot assembly of HRP and Ab₂ on the surface of Au NRs. The immunosensor was fabricated by assembling carbon nanotubes (CNTs), Au NRs, and capture antibodies (Ab₁) on the glassy carbon electrode. In the presence of AFP antigen, the labels were captured on the surface of the Au NRs/CNTs via specific recognition of antigen–antibody, resulting in the signal intensity being clearly increased. Differential pulse voltammetry (DPV) was employed to record the response signal of the immunosensor in phosphate-buffered saline (PBS) containing hydrogen peroxide (H₂O₂) and 3,3′,5,5′-tetramethylbenzidine (TMB). Under optimal conditions, the signal intensity was linearly related to the concentration of AFP in the range of 0.1–100 ng ml⁻¹, and the limit of detection was 30 pg ml⁻¹ (at signal/noise [S/N] = 3). Furthermore, the immunoassay method was evaluated using human serum samples, and the recovery obtained was within 99.0 and 102.7%, indicating that the immunosensor has potential clinical applications.     

Carbon nanotube-based ultrasensitive multiplexing electrochemical immunosensor for cancer biomarkers

A multiplexing electrochemical immunosensor was developed for ultrasensitive detection of cancer related protein biomarkers. We employed disposable screen-printed carbon electrode (SPCE) array as the detection platform. A universal multi-labeled nanoprobe was developed by loading HRP and goat-anti-rabbit IgG (secondary antibody, Ab₂) onto multiwalled carbon nanotube (MWNT). This universal nanoprobe was available for virtually any sandwich-based antigen detection and showed superiority in several areas. By using the SPCE array and the universal nanoprobe, we could detect as low as 5 pg mL⁻¹ of prostate specific antigen (PSA) and 8 pg mL⁻¹ of Interleukin 8 (IL-8) with the electrochemical immunosensor. We also demonstrated simultaneous detection of two protein biomarkers with this platform. With these attracted features, our immunoassay system shows promising applications for in-field and point-of-care test in clinical diagnostics.     

An electrochemical enzyme bioaffinity electrode based on biotin-streptavidin conjunction and bienzyme substrate recycling for amplification

A signal amplificatory electrochemical immunoassay with biotin-streptavidin conjunction and multienzymatic-based substrate recycling was developed in this work. Biotinylated secondary antibody (bio-IgG) was preliminarily assembled onto the immunosensor interface based on the sandwich format. Streptavidin was then loaded based on biotin-streptavidin conjunction. Owing to four identical binding sites of streptavidin to biotin, amounts of biotinylated alkaline phosphatase (bio-AP) were attached, and this improved the catalytic performance of the proposed immunosensor. Under the enzyme catalysis of AP, the electroinactive p-aminophenylphosphate (PAPP) substrate was rapidly hydrolyzed into the electroactive p-aminophenol (PAP) product, which next oxidized at the electrode surface into p-quinoneimine (PQI). In the presence of diaphorase (DI), PQI was reduced back to PAP, leading to a reversible cycle of PAP. Then the oxidized state of DI was regenerated into its reduced native state by its natural substrate, nicotinamide adenine dinucleotide (NADH). With the several amplification factors mentioned above, a wider linear ranged from 10⁻¹⁴ to 10⁻⁵ g ml⁻¹ was acquired with a relatively low detection limit of 3.5 × 10⁻⁵ g ml⁻¹ for human IgG. In addition, the nonspecific adsorption of proposed immunosensor was also investigated here.     

Screening of boldenone and methylboldenone in bovine urine using disposable electrochemical immunosensors

Electrochemical based immunosensors for the detection of boldenone and methylboldenone in bovine urine were described in this paper. The immunosensors were fabricated by immobilizing boldenone-bovine serum albumin conjugate on the surface of screen-printed electrodes (SPEs), and followed by the competition between the free analyte and coating conjugate with corresponding antibodies. The use of anti-species IgG-horseradish peroxidase conjugate determined the degree of competition. The electrochemical technique chosen was chronoamperometry, performed at a potential of +100 mV whereby the product of the catalysis of 3,3′,5,5′-tetramethylbenzidine undergoes reduction produced by the enzyme label. The limits of detection of assay were 30.9 ± 4.3 pg ml⁻¹ for boldenone and 120.2 ± 8.2 pg ml⁻¹ for methylboldenone, respectively. Results of repeated analysis of each androgen carried out using three different batches of electrodes indicate suitable repeatability (EC₅₀ = 1.0 ± 0.3 ng ml⁻¹ (n = 3, N = 3), R² = 0.969, R.S.D. = 9.6% for boldenone and 1.5 ± 0.3 ng ml⁻¹, 0.971, 10.5% for methylboldenone, respectively). Urine samples were determined directly after a single dilution step, omitting extraction and hydrolysis. This method offers the advantage to pick up both boldenone and its major metabolites in an efficient manner due to the high cross-reactivity pattern of α-boldenone with this antibody. The concentration of methylboldenone in urine detected by developed methods does indicate methylboldenone administration to heifers. Gas chromatography coupled to mass spectrometry analysis was performed to quantitate the individual metabolites present in urine samples, and results were validated with both ELISA and immunosensor data.     

One-step immobilization of antibodies for α-1-fetoprotein immunosensor based on dialdehyde cellulose/ionic liquid composite

A novel immunosensor for α-1-fetoprotein based on dialdehyde cellulose/ionic liquid composite film as a matrix has been developed. Microcrystalline cellulose was activated by sodium metaperiodate to produce dialdehyde cellulose. Antibodies can be immobilized on the electrode by a one-step method through covalent bonding of the aldehyde groups of dialdehyde cellulose with the amino groups of antibodies, in which no additional chemical cross-linking step is required. Moreover, ionic liquid added can improve the conductivity of the sensing interface and, therefore, can enhance the electrochemical signal. In this work, α-1-fetoprotein was detected within the range from 0.1 to 60 ng ml⁻¹ with a detection limit of 0.07 ng ml⁻¹ (signal/noise = 3). The proposed immunosensor had good specificity and reproducibility. It was used to determine real samples with satisfactory results.     

Detection of Bacillus thuringiensis Cry1Ab protein based on surface plasmon resonance immunosensor

Two novel surface plasmon resonance immunosensors were fabricated for detection of the Bacillus thuringiensis Cry1Ab protein and to demonstrate their performance in analyzing Cry1Ab protein in crop samples. Sensor 2 was modified by 1,6-hexanedithiol, Au/Ag alloy nanoparticles, 3-mercaptopropionic acid, and protein A (or not [sensor 1]), with Cry1Ab monoclonal antibody. As a result, both of the immunosensors exhibited satisfactory linear responses in the Cry1Ab protein concentration ranges of 10 to 500 ng ml⁻¹ and 8 to 1000 ng ml⁻¹, and the detection limits were 5.0 and 4.8 ng ml⁻¹, respectively. The immunosensors possessed good specificity and acceptable reproducibility. In addition, crop samples could be analyzed after a simple treatment. The transgenic crops could be easily identified from the conventional ones by the two immunosensors.     

Ultra pH‐sensitive detection of total and free prostate‐specific antigen using electrochemical aptasensor based on reduced graphene oxide/gold nanoparticles emphasis on TiO2/carbon quantum dots as a redox probe

The development of a rapid, sensitive, and straightforward detection method of prostate‐specific antigen (PSA) is indispensable for the early diagnosis of prostate cancer (PCa). This work relates an electrochemical method using functionalized single‐stranded DNA aptamer to diagnose PCa and benign prostate hyperplasia. The sensing platform relies on PSA recognition by aptamer/Au/GO‐nanohybrid‐modified glassy carbon electrode. Besides ferrocyanide TiO₂/carbon quantum dots (CQDs) probe is used to investigate the effect of nanoparticle‐containing electrolyte. Optimization of incubation time of aptamer/Au/GO‐nanohybrid and volume fraction of nafion were done using Design Expert 10 software reporting 42.4 h and 0.095% V/V, respectively. In ferrocyanide medium, PSA detection as low as 3, 2.96, and 0.85 ng mL⁻¹ was achieved with a dynamic range from 0.5 to 7 ng ml⁻¹, in accord with clinical values, using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy, respectively. Moreover, this sensor exhibited conspicuous performance in TiO₂/CQDs‐containing medium with different pH values of 5.4 and 8 to distinguish total PSA and free PSA, resulting in very low limit of detections, 0.028, and 0.007 ng ml⁻¹, respectively. The results manifested the proposed system as a forthcoming sensor in a clinical and point of care analysis of PSA.     

Sensitive amperometric immunosensor for α-fetoprotein based on carbon nanotube/gold nanoparticle doped chitosan film

A novel strategy for the fabrication of sensitive immunosensor to detect α-fetoprotein (AFP) in human serum has been proposed. The immunosensor was prepared by immobilizing AFP antigen onto the glassy carbon electrode (GC) modified by gold nanoparticles and carbon nanotubes doped chitosan (GNP/CNT/Ch) film. GNP/CNT hybrids were produced by one-step synthesis based on the direct redox reaction. The electrochemical properties of GNP/CNT/Ch films were characterized by impedance spectroscopy and cyclic voltammetry. It was indicated that GNP/CNT nanohybrid acted as an electron promoter and accelerated the electron transfer. Sample AFP, immobilized AFP, and alkaline phosphatase (ALP)-labeled antibody were incubated together for the determination based on a competitive immunoassay format. After the immunoassay reaction, the bound ALP label on the modified GC led to an amperometric response of 1-naphthyl phosphate (1-NP), which was changed with the different antigen concentrations in solution. Under the optimized experimental conditions, the resulting immunosensor could detect AFP in a linear range from 1 to 55 ng ml⁻¹ with a detection limit of 0.6 ng ml⁻¹. The proposed immunosensor, by using GNP/CNT/Ch as the immobilization matrix of AFP, offers an excellent amperometric response of ALP-anti-AFP to 1-NP. The immunosensor provided a new alternative to the application of other antigens or other bioactive molecules.     

One-step homogeneous non-stripping chemiluminescence metal immunoassay based on catalytic activity of gold nanoparticles

The catalytic activity of gold nanoparticles (AuNPs) on a luminol–H₂O₂ chemiluminescence (CL) system is found to be greatly enhanced after its crosslinking aggregation induced by immunoreaction. Based on this observation, a one-step homogeneous non-stripping CL metalloimmunoassay was designed. In the presence of corresponding antigen (Ag), the immunoreaction caused the aggregation of antibody (Ab)-modified AuNPs, and these crosslinking aggregated AuNPs could catalyze luminol–H₂O₂ CL reaction to produce a much stronger CL signal than dispersed Ab-modified AuNPs. The assay, including immunoreaction and detection, can be accomplished in homogeneous solution. In the assay, no tedious and strict stripping of metal nanoparticles, difficult synthesis of labels, multiple steps of immunoreactions and washings, and complicated magnetic separation process were required. The detection limit of human immunoglobulin G (IgG, 3σ) was estimated to be as low as 3.2 × 10⁻¹¹ g ml⁻¹. The sensitivity was increased by two orders of magnitude over that of other AuNP-based CL immunoassay. The current CL metalloimmunoassay offers the advantages of being simple, cheap, rapid, and sensitive.     

Electrochemical assay for the determination of nitric oxide metabolites using copper(II) chlorophyllin modified screen printed electrodes

This work presents a novel electrochemical assay for the collective measurement of nitric oxide (NO) and its metabolites nitrite (NO₂⁻) and nitrate (NO₃⁻) in volume miniaturized sample at low cost using copper(II) chlorophyllin (CuCP) modified sensor electrode. Zinc oxide (ZnO) incorporated screen printed carbon electrode (SPCE) was used as a host matrix for the immobilization of CuCP. The morphological changes of the ZnO and CuCP modified electrodes were investigated using scanning electron microscopy. The electrochemical characterization of CuCP–ZnO–SPCE exhibited the characteristic quasi-reversible redox peaks at the potential +0.06 V versus Ag/AgCl. This biosensor electrode showed a wide linear range of response over NO concentrations from 200 nM to 500 μM with a detection limit of 100 nM and sensitivity of 85.4 nA μM⁻¹. Furthermore, NO₂⁻ measurement showed linearity of 100 nM to 1 mM with a detection limit of 100 nM for NO₂⁻ and sensitivity of 96.4 nA μM⁻¹. Then, the concentration of NO₃⁻ was measured after its enzymatic conversion into NO₂⁻. Using this assay, the concentrations of NO, NO₂⁻, and NO₃⁻ present in human plasma samples before and after beetroot supplement were estimated using suitable membrane coated CuCP–ZnO–SPCE and validated with the standard Griess method.     

Label-free amperometric immunosensor for the detection of human serum chorionic gonadotropin based on nanoporous gold and graphene

A label-free amperometric immunosensor for fast and sensitive assay of human serum chorionic gonadotropin (hCG) is presented. hCG was immobilized on nanoporous gold (NPG) foils and using hydroquinone (HQ) redox species as indicator. The variation of amperometric response to the concentration of hCG, the target antigen, was evaluated by cyclic voltammetry in phosphate-buffered solution. Taking advantage of dual-amplification effects of the NPG foils and graphene sheets (GSs), the immunosensor exhibited a specific response to hCG in the range of 0.5–40.00 ng ml⁻¹ with a detection limit of 0.034 ng ml⁻¹ under optimal conditions. It was demonstrated that our proposed method possesses good accuracy, acceptable precision, and reproducibility. The NPG showed a better sensitizing effect and stability as immobilization matrices.     

Simultaneous detection of two tumor markers using silver and gold nanoparticles decorated carbon nanospheres as labels

In this work, a multiplexed electrochemical immunosensor was developed for sensitive detection of carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) using silver nanoparticles (Ag NPs) or gold nanoparticles (Au NPs) coated-carbon nanospheres (CNSs) as labels. CNSs were employed as the carrier for the immobilization of nanoparticles (Ag NPs or Au NPs), thionine (Thi), and secondary antibodies (Ab₂) due to their good monodispersity and uniform structure. Au NPs reduced graphene oxide (rGO) nanocomposites were used as sensing substrate for assembling two primary antibodies (Ab₁). In the presence of target proteins, two labels were attached onto the surface of the rGO/Au NPs nanocomposites via a sandwich immunoreaction. Two distinguishable peaks, one at +0.16 V (corresponding to Ag NPs) and another at −0.33 V (corresponding to Thi), were obtained in differential pulse voltammetry (DPV). The peak difference was approximately 490 mV, indicating that CEA and AFP can be simultaneously detected in a single run. Under optimal conditions, the peak currents were linearly related to the concentrations of CEA or AFP in the range of 0.01–80 ng ml⁻¹. The detection limits of CEA and AFP were 2.8 and 3.5 pg ml⁻¹, respectively (at a signal-to-noise ratio of 3). Moreover, when the immunosensor was applied to serum samples, the results obtained were in agreement with those of the reference method, indicating that the immunosensor would be promising in the application of clinical diagnosis and screening of biomarkers.     

Synthesis, crystal structure and interaction with DNA and HSA of (N,N'-dibenzylethane-1,2-diamine) transition metal complexes

A new ligand, N,N′-dibenzylethane-1,2-diamine (L) and its four transition metal(II) complexes, ML₂(OAc)₂ · 2H₂O (M = Cu, Ni, Zn, Co), have been synthesized and characterized by elemental analysis, mass spectra, molar conductivity, NMR and IR. Moreover, the crystals structure of Cu(II) and Ni(II) complexes characterized by single crystal X-ray diffraction showed that the complexes have a similar molecular structure. Ni(II) has an regular octahedral coordination environment complexes, but typical Jahn Teller effect influenced Cu(II) in an elongated octahedral environment. The interaction between complexes and calf thymus DNA were studied by UV and fluorescence spectra measure, which showed that the binding mode of complexes with DNA is intercalation. Under physiological pH condition, the effects of Cu(OAc)₂L₂ · 2H₂O and Ni(OAc)₂L₂ · 2H₂O on human serum albumin were examined by fluorescence. The results of spectroscopic measurements suggested that the hydrophobic interaction is the predominant intermolecular force. The enthalpy change ΔH⁰ and the entropy change ΔS⁰ of Cu(OAc)₂L₂ · 2H₂O and Ni(OAc)₂L₂ · 2H₂O were calculated to be −11.533 kJ mol⁻¹ and 46.339 J mol⁻¹ K⁻¹, −11.026 kJ mol⁻¹ and 46.396 J mol⁻¹ K⁻¹, respectively, according to the Scatchard’s equation. The quenching mechanism and the number of binding site (n ≈ 1) were also obtained from fluorescence titration data.     

γ-Cyclodextrin–polyurethane copolymer adsorbent for selective removal of endotoxin from DNA solution

Copolymer particles for removal of endotoxins (lipopolysaccharides, LPSs) were prepared by suspension copolymerization of γ-cyclodextrin (CyD) and 1,6-hexamethylenediisocyanate. The LPS-removing activity of the copolymer particles was compared with that of poly(ε-lysine)-immobilized Cellufine (cationic adsorbent) or polystyrene particles (hydrophobic adsorbent) by a batch method. When DNA was present in solution with LPSs under physiological conditions (pH 6.0, ionic strength of μ = 0.05–0.8), LPS-removing activity of the cationic or hydrophobic adsorbent was unsatisfactory because both the DNA and the LPSs were adsorbed onto each adsorbent. By contrast, the copolymer particles with γ-CyD cavity (CyD content: 14–20 mol%) could selectively remove LPSs from a DNA solution (50 μg ml⁻¹, pH 6.0, and μ = 0.05–0.2) containing LPSs (15 EU ml⁻¹) without the adsorption of DNA. The residual concentration of LPSs in the treated DNA solution was below 0.1 EU ml⁻¹, and the recovery of DNA was 99%.