A high-affinity reversible protein stain for Western blots

We describe a reversible staining technique, using MemCode, a reversible protein stain by which proteins can be visualized on nitrocellulose and polyvinylidine fluoride (PVDF) membranes without being permanently fixed to the membrane itself. This allows subsequent immunoblot analysis of the proteins to be performed. The procedure is applicable only to protein blots on nitrocellulose and PVDF membranes. MemCode is a reversible protein stain composed of copper as a part of an organic complex that interacts noncovalently with proteins. MemCode shows rapid protein staining, taking 30s to 1 min for completion. The method is simple and utilizes convenient application conditions that are compatible with the matrix materials and the protein. The stain is more sensitive than any previously described dye-based universal protein staining system. The turquoise-blue-stained protein bands do not fade with time and are easy to photograph compared to those stained with Ponceau S. Absorbance in the blue region of the spectrum offers good properties for photo documentation and avoids interference from common biological chromophores. The stain on the protein is easily reversible in 2 min for nitrocellulose membrane and in 10 min for PVDF membrane with MemCode stain eraser. The stain is compatible with general Western blot detection systems, and membrane treatment with MemCode stain does not interfere with conventional chemiluminescent or chromogenic detection using horseradish peroxide and alkaline phosphatase substrates. The stain is also compatible with N-terminal sequence analysis of proteins.     

Protein transfer from fixed, stained, and dried polyacrylamide gels and immunoblot with protein A-gold

The method of electrophoretically transferring proteins from fixed and stained polyacrylamide gels onto nitrocellulose paper has been reevaluated. It is shown that the tedious destaining of gels is not necessary because Coomassie brilliant blue, although it binds tenaciously to nitrocellulose paper, does not reduce the transfer efficiency of proteins. However, its presence impairs the visibility of proteins as detected, for instance, by the immunogold technique. Therefore, a rapid method for the complete removal of the stain from the nitrocellulose paper after completion of the immunogold procedure was developed. Furthermore, it is shown that proteins from dried polyacrylamide gels can still be transferred onto nitrocellulose sheets with an efficiency of approximately 50% compared to proteins transferred from fixed gels.     

Electrophoretic transfer of proteins from fixed and stained gels

A procedure by which sodium dodecyl sulfate gels can be fixed and stained with Coomassie blue and subsequently transferred to nitrocellulose for immunostaining is outlined. The procedure involves the complete removal of the stain followed by equilibration of the gel in sodium dodecyl sulfate running buffer. The efficiency of transfer is comparable to unfixed gels and the protein pattern of the transfer appears to be sharper, presumably due to less diffusion during the transfer process. The procedure does not affect the antigenicity of the proteins that have been examined by subsequent immunostaining. This method is particularly useful for situations in which sample size or concentration are limiting factors resulting in insufficient material for duplicate gels.     

Eosin Y staining of proteins in polyacrylamide gels.

A staining method is described in which various proteins in polyacrylamide gels can be stained by using eosin Y. After a brief incubation of a polyacrylamide gel in an acidic solution of 1% eosin Y, various proteins, including human erythrocyte membrane sialoglycoproteins which are not detectable by Coomassie blue R-250 (CB), can be detected with a sensitivity of 10 ng protein. This is far more sensitive than CB staining and is comparable to the sensitivity of silver staining. In a Western blot, the antigenicity of an eosin Y stained protein is retained. In addition, proteins on an immunoblot sheet can be detected by eosin Y staining. The method described is rapid, sensitive, and reproducible with various proteins in polyacrylamide gels and has the added advantage of also staining sialoglycoproteins.     

Fluorescent labeling of nitrocellulose-bound proteins at the nanogram level without changes in immunoreactivity

Proteins blotted on nitrocellulose were stained with either 5-dimethylamino-1-naphthalene-sulfonylchloride (dansyl chloride) or fluorescein isothiocyanate. In both cases the staining procedure can be completed in less than 30 min. The sensitivity for detecting fluorescent-labeled proteins on nitrocellulose was 0.5 ng using a dot test. This was accomplished by transparentizing the nitrocellulose with either immersion oil or toluene. Dansylated proteins were successfully utilized for optimizing the electroblotting procedure. In the presence of 0.2% sodium dodecyl sulfate and 20% methanol the distribution of proteins on the nitrocellulose was an exact replica of the protein pattern seen in the polyacrylamide gel. The fluorescent labeling did not affect the antigenic properties of proteins allowing the subsequent probing with antisera. For this procedure, only one set of samples is needed to obtain accurate photographic records of the gel, the nitrocellulose blot, and the probed blot.     

A method for detecting proteins immobilized on nitrocellulose membranes by in situ derivatization with fluorescein isothiocyanate

A method for the fluorescent staining of proteins on nitrocellulose filters is described. The single step procedure uses a 100 microgram/ml solution of fluorescein isothiocyanate in sodium carbonate buffer, pH 9.5. The proteins are visible under uv light within 30 s and the staining reaction is virtually complete after 10 min. The method can detect a minimum of 50 ng protein/band providing a sensitivity similar to that obtained with anionic dye stains. The method is suitable for blots prepared from both isoelectric focusing gels and sodium dodecyl sulfate-polyacrylamide gels. The fluorescently labeled proteins can be probed using immunochemical techniques with the retention of fluorescence. The method can therefore be used to accurately locate antigens among a number of proteins and allows the sensitive and rapid detection of marker proteins directly on the blot.     

Fast and efficient method for detection and estimation of proteins

A quick, simple, inexpensive and sensitive method is described to stain and quantitate proteins on nitrocellulose papers. The proteins may be spotted or transferred from polyacrylamide gels by Western blotting. The procedure involves non-radioactive iodination of the polypeptides by chloramine T and potassium iodide followed by detection of bound iodine with starch. The method is more sensitive and much quicker than Coomassie brilliant blue staining and may be used for quantitation or detection of proteins in unknown samples. Another major advantage of this procedure is that ionic or nonionic detergents, although at higher concentrations causing the sample to disperse more broadly in the membranes, do not affect the staining procedure. Further, this method may be used for detection of proteins bound to papers that have high affinity for proteins such as the Zeta probe membranes.     

Visualization of acid phosphatase activity on nitrocellulose filters following electroblotting of polyacrylamide gels

A method for visualizing acid phosphatase isoenzymes by activity staining on nitrocellulose filters after electroblotting of proteins fractionated on nondenaturing polyacrylamide gels is described. Reproducible results were obtained when 25 mM Tris-192 mM glycine was used as the transfer buffer instead of 0.7% acetic acid, 50 mM sodium acetate, pH 4, or 0.14 M acetic acid--0.35 M beta-alanine, pH 4.3. Dot-blot analysis of banana fruit extracts on nitrocellulose filters revealed that a minimum of 5 x 10(-3) units (nmol p-nitrophenyl phosphate hydrolyzed g-1.h-1) of acid phosphatase activity can be detected. This method can be suitable for screening a large number of biological samples for monitoring acid phosphatase activity.     

Visible fluorescent detection of proteins in polyacrylamide gels without staining

2,2,2-Trichloroethanol (TCE) incorporated into polyacrylamide gels before polymerization provides fluorescent visible detection of proteins in less than 5min of total processing time. The tryptophans in proteins undergo an ultraviolet light-induced reaction with trihalocompounds to produce fluorescence in the visible range so that the protein bands can be visualized on a 300-nm transilluminator. In a previous study trichloroacetic acid or chloroform was used to stain polyacrylamide gel electrophoresis (PAGE) gels for protein visualization. This study shows that placing TCE in the gel before electrophoresis can eliminate the staining step. The gel is removed from the electrophoresis apparatus and placed on a transilluminator and then the protein bands develop their fluorescence in less than 5min. In addition to being rapid this visualization method provides detection of 0.2microg of typical globular proteins, which for some proteins is slightly more sensitive than the standard Coomassie brilliant blue (CBB) method. Integral membrane proteins, which do not stain well with CBB, are visualized well with the TCE in-gel method. After TCE in-gel visualization the same gel can then be CBB stained, allowing for complementary detection of proteins. In addition, visualization with TCE in the gel is compatible with two-dimensional PAGE, native PAGE, Western blotting, and autoradiography.     

Vertical slab gel electrophoresis on a large number of samples: an apparatus with the capacity for central cooling

Following horizontal electroelution, or blotting, of proteins from polyacrylamide gels to immobilizing matrices, such as nitrocellulose or Zeta-bind paper, the transferred proteins can be derivatized in situ with pyridoxal 5'-phosphate and sodium borohydride. After a quenching step to eliminate nonspecific binding of antibody to the protein-binding matrix, the blot is incubated with a solution containing a mouse monoclonal antibody specific for the 5'-phosphopyridoxyl group. The transferred proteins can then be located on the blot with second antibody staining procedures employing either a peroxidase-linked goat anti-mouse F(ab')2 antibody or a peroxidase-linked avidin/biotin system. The solid-phase enzyme-linked immunosorbent assay method described in this report is a mild, general, and sensitive immunochemical method for the detection of proteins on protein-binding matrices.     

A new silver staining apparatus and procedure for matrix-assisted laser desorption/ionization-time of flight analysis of proteins after two-dimensional electrophoresis

We report on a new silver stain especially developed for staining large gels (25 cm x 20 cm) from the Hoefer ISO-DALT system for matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis of proteins. The staining protocol can be summarized as follows: the gels are sensitised in tetrathionate/potassium acetate solution and washed several times in distilled water. After impregnation with silver nitrate, the silver is reduced in the presence of potassium carbonate, thiosulphate and formaldehyde. The staining procedure is stopped with Tris/acetate after which the gels are rinsed and stored in water before spot picking for MALDI-TOF analysis is performed. This protocol has several advantages over existing ones. The gels are stained in a new apparatus that reduces gel handling to a minimum thus also reducing the contamination with keratins to a minimum. The development times in potassium carbonate are very long (up to 40 min) thus improving batch-to-batch reproducibility. Only the surface of the proteins is stained and the silver can be oxidized, thereafter MALDI-TOF can be performed with protein loads as little as 100 micrograms per gel.     

Direct tissue isoelectric focusing on mini ultrathin polyacrylamide gels followed by subsequent western blotting, enzyme detection, and lectin labeling as a tool for enzyme characterization in histochemistry.

Application of cryostat sections directly onto mini ultrathin polyacrylamide isoelectric focusing gels allows an elution of proteins out of the sections into the gels under conventional focusing conditions. Protein bands representing alkaline phosphatases can easily be identified on nitrocellulose after performing a modified Western blot procedure. Furthermore, carbohydrate residues of several isoforms of alkaline phosphatases separated by isoelectric focusing can be demonstrated in a single blot strip by subsequent incubation of this strip with substrates for alkaline phosphatase and peroxidase, the latter being employed as the enzyme to which the applied lectins are covalently linked. This simple and reproducible procedure is likely to enable histochemists to determine isoforms of enzymes from a single cryostat section.     

Advantages of picrate fixation for staining polypeptides in polyacrylamide gels

When acetic acid-urea polyacrylamide gels with or without Triton X-100 were immersed in 0.1 M Na picrate, pH 7, to which 1/4 vol Coomassie blue staining solution (0.2% in 45% methanol, 10% acetic acid, 45% water) was added, proteins stained rapidly (within a few minutes in gels without Triton and within an hour in gels with Triton) with little or no background staining. Thus protein bands could be observed in a single step with no destaining. The picrate-Coomassie blue method fixed and stained a small peptide (bradykinin, nine amino acids) that was not observed in gels stained with fast green, silver, or Coomassie blue following fixation in 50% trichloroacetic acid. The picrate-Coomassie blue method gave high-contrast bands suitable for densitometry. Gels containing sodium dodecyl sulfate were also stained by the picrate-Coomassie blue method if they were first washed briefly (1 h) in 45% methanol, 10% acetic acid, 45% water, presumably to remove the detergent. These gels also stained rapidly with almost no background.     

Fluorescent monitoring of proteins during sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting

Fluorescent labeling of proteins was found to be a very sensitive and reliable alternative to conventional methods for monitoring proteins on Western blots. Proteins were labeled with 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF) before SDS-PAGE. After electrophoresis and subsequent electro-blotting the fluorescent-labeled proteins were visible upon ultraviolet illumination of the nitrocellulose membranes, and could be photographed to yield an accurate record of the blots before subsequent serological analysis. The sensitivity for detecting MDPF-labeled proteins on nitrocellulose was 100-200 ng, 50 to 100 fold less sensitive than on gels. Fluorescent-labeled TMV and MStpV capsid proteins that were blotted onto nitrocellulose still reacted in serological tests and were detected when present in quantities as low as 100 pg. Fluorescent labeling allows accurate photographic records of the SDS-gel, blot and probed blot using only one sample, and no subsequent staining steps are required.     

A luminescent ruthenium complex for ultrasensitive detection of proteins immobilized on membrane supports

SYPRO Ruby protein blot stain provides a sensitive, gentle, fluorescence-based method for detecting proteins on nitrocellulose or polyvinylidene difluoride (PVDF) membranes. SYPRO Ruby dye is a permanent stain composed of ruthenium as part of an organic complex that interacts noncovalently with proteins. Stained proteins can be excited by ultraviolet light of about 302 nm or with visible light of about 470 nm. Fluorescence emission of the dye is approximately 618 nm. The stain can be visualized using a wide range of excitation sources utilized in image analysis systems including a UV-B transilluminator, 488-nm argon-ion laser, 532-nm yttrium-aluminum-garnet (YAG) laser, blue fluorescent light bulb, or blue light-emitting diode (LED). The detection sensitivity of SYPRO Ruby protein blot stain (0.25-1 ng protein/mm(2)) is superior to that of amido black, Coomassie blue, and india ink staining and nearly matches colloidal gold staining. SYPRO Ruby protein blot stain visualizes proteins more rapidly than colloidal gold stain and the linear dynamic range is more extensive. Unlike colloidal gold stain, SYPRO Ruby protein blot stain is fully compatible with subsequent biochemical applications including colorimetric and chemiluminescent immunoblotting, Edman-based sequencing and mass spectrometry.     

Silver stain for proteins on a cellulose acetate membrane

A rapid and sensitive silver staining method to detect proteins on a cellulose acetate membrane has been established. This method is achieved by modification of the silver-based color staining for detection of proteins in polyacrylamide gels [D. W. Sammons, L. D. Adams, and E. E. Nishizawa, Electrophoresis 2, 135-141 (1981)] and applied to our new type of two-dimensional electrophoresis for analysis of proteins on a cellulose acetate sheet [T. Toda, T. Fujita, and M. Ohashi, Anal. Biochem. 119, 167-176 (1982)]. Maximal sensitivity of silver stain for proteins on a cellulose acetate membrane can be obtained by an optimal balance between deposition of silver on the protein and on the background. Certain kinds of proteins are colored red, orange, or grayish-blue. The silver stain is 20-80 times more sensitive than Coomassie blue and some spots are visualized reproducibly by silver only. Densitometric evaluation of standard proteins stained with silver and Coomassie blue is also demonstrated. The method takes only 50 min to perform and is sensitive, simple, and reproducible.     

Method for detecting the lectin activity of Momordica charantia transferred from micro two-dimensional electrophoretic gel on to nitrocellulose

A method was devised for detecting both the molecular mass and the isoelectric point (pI) of the lectin in the seed extract of Momordica charantia on a nitrocellulose membrane. It was associated with the electrophoretic blotting technique that produced replicas of proteins separated on micro two-dimensional polyacrylamide gels. The red blood cell adherence procedure on the blotted membrane exhibited only one red spot with molecular mass 107·10³ and pI 5.3, which indicated the lectin activity. Additionally, the lectin appeared to be a glycoprotein with mannose and/or glucose, because it was stained by concanavalin A-peroxidase staining.     

Application of SYPRO Ruby- and Flamingo-stained polyacrylamide gels to Western blot analysis

Western blot analysis has been a useful method for analysis of expression levels of specific proteins and is conducted after sodium dodecyl sulfate (SDS) or native polyacrylamide gel electrophoresis without staining the gel. However, when it is necessary to analyze the gel, duplicate polyacrylamide gels usually must be prepared, one of which is stained, leading to the consumption of precious sample. Thus, we developed a convenient and efficient Western blotting method using a stained gel. This simple modification should be beneficial for analyzing samples that are limited in quantity and/or samples for which the stained gel serves as the loading control.     

Erratum to “Application of SYPRO Ruby- and Flamingo-stained polyacrylamide gels to Western blot analysis”

Western blots are widely used for analysis of the expression levels of specific proteins. Blotting is conducted after sodium dodecyl sulfate or native polyacrylamide gel electrophoresis without staining the gel. However, when it is necessary to analyze the gel, duplicate polyacrylamide gels (one of which is stained) usually must be prepared, leading to the consumption of precious sample. Thus, we have developed a convenient and efficient Western blot method using a stained gel. This simple modification should be beneficial for the analysis of samples that are limited in quantity and/or samples for which the stained gel serves as the loading control.     

A procedure for the immunoblotting of proteins separated on isoelectric focusing gels

A method has been devised for performing Western blot assays on proteins resolved by isoelectric focusing. Electrophoretic transfer of proteins directly from isoelectric focusing (IEF) tube gels to nitrocellulose sheets allowed their immunoassay without conventional second dimension SDS gel electrophoresis. The same method can also be used for IEF slab gels. For the immunostaining of nonmuscle actin isoforms in extracts of cultured cells, the resolution of this technique was much improved over that of Western blots of two-dimensional gels.