Continuous production of selenomethionine-enriched Chlorella sorokiniana biomass in a photobioreactor

This article describes the enrichment of the fresh-water green microalga Chlorella sorokiniana in selenomethionine (SeMet). The microalga was cultivated in a 2.2 L glass-vessel photobioreactor, in a culture medium supplemented with selenate (SeO₄^2?) concentrations ranging from 5 to 50 mg L^?1. Although selenate exposure lowered culture viability, C. sorokiniana grew well at all tested selenate concentrations, however cultures supplemented with 50 mg L^?1 selenate did not remain stable at steady state. A suitable selenate concentration in fresh culture medium for continuous operation was determined, which allowed stable long-term cultivation at steady state and maximal SeMet productivity. In order to do that, the effect of dilution rate on biomass productivity, viability and SeMet content of C. sorokiniana at several selenate concentrations were determined in the photobioreactor. A maximal SeMet productivity of 21 μg L^?1 day^?1 was obtained with 40 mg L^?1 selenate in the culture medium. Then a continuous cultivation process at several dilution rates was performed at 40 mg L^?1 selenate obtaining a maximum of 246 μg L^?1 day^?1 SeMet at a low dilution rate of 0.49 day^?1, calculated on total daily effluent volume. This paper describes for the first time an efficient long-term continuous cultivation of C. sorokiniana for the production of biomass enriched in the high value amino acid SeMet, at laboratory scale.     

Phosphorus removal from agricultural runoff by constructed wetland

A free-water surface wetland covering an area of 2800 m² was operated from March 2002 to June 2004 for agricultural runoff treatment in the Dianchi Valley in China. In the wetland were grown Zizania Caduciflora Turez Hand-mazt and Phragmites australis (Cav.) Trin.ex Steud. The instantaneous inflow rate was measured and the integrated flux was recorded by an ultrasonic flow instrument all year round. The average inflow rate, hydraulic loading rate (HLR) and hydraulic retention time (HRT) were kept at 242 m³ d^?1, 12.7 cm d^?1 and 2.0 d, respectively. The annual average total phosphorus (TP) in the inflow was 0.87 mg L^?1, and the corresponding removal efficiency was calculated to be 59.0%. Biannual plant uptake and removal by harvesting and seed transport was the main pathway for TP removal, while the influent TP load was 12.9 g m^?2 year^?1. Hydraulic retention time had a significant positive correlation with the removal of P (r² = 0.88). Water temperature, inflow phosphorus load, inflow and hydraulic load rates were positively correlated with the removal of P. Inflow phosphorus concentrations were negatively correlated with the removal of P. It is shown that the free-water surface wetland was an effective and economical system for agricultural runoff treatment in lake regions.     

Phosphorus sorption by sediments in a subtropical constructed wetland receiving stormwater runoff

This study investigated the potential of using a mixture of fishpond bund material, completely decomposed granite and river sand as substrate in a constructed wetland for phosphorus removal. Core samples were collected from the newly constructed Hong Kong Wetland Park (HKWP) receiving influent stormwater from a nearby new town, and batch incubation experiments were conducted to determine the P sorption characteristics of sediments. The HKWP sediments adsorbed the majority of available P in the initial 20 min of incubation, with a first-order rate constant of 1.01–2.11 h^?1. Sediments in the reedbeds and freshwater marshes possessed a great capacity for P adsorption with the high Langmuir sorption maxima (478–858 mg kg^?1) and Freundlich adsorption constants (417–672 L kg^?1) obtained, attributable to the high amorphous iron and aluminium concentrations compared to other constructed wetlands. Moreover, sediment equilibrium P concentrations were generally low (4.6–23.6 μg L^?1), facilitating a net P adsorption by sediments under moderate P loadings. Yet, the amount of P adsorbed by the HKWP sediments was limited by the low ambient porewater P concentrations and there was even a risk of P desorption when sediments in the freshwater marshes were resuspended into the water column. While substrates in the HKWP demonstrated a great potential for P adsorption, consideration should also be given to P loadings in influent water to fully utilize the P sorption capacity of sediments and enhance the P removal efficiency of constructed wetlands.     

Nutrient uptake and release in ponds under long-term and short-term lotus (Nelumbo nucifera) cultivation: Influence of compost application

Uptake and release of nutrients from ponds used for lotus cultivation were measured in ponds under short-term (1 yr) cultivation with compost application (pond I) and under long-term (20 yr) cultivation without compost application (pond II). Total inflow loads of TN (irrigation water, rainfall and compost) during lotus cultivation period in ponds I and II were 72.3 and 34.3 kg ha^?1 182 day^?1, respectively. TN removal rates in ponds I and II were 77.3 and 49.8% of total inflow load, respectively. Major removal mechanisms of TN were attributed to microbial processes and uptake by lotus. The total outflow loads (infiltration and runoff) of TN during the lotus cultivation period were 13.9 kg ha^?1 182 day^?1 (19.2% of total inflow TN load) for pond I, and 11.3 kg ha^?1 182 day^?1 (32.9% of total inflow TN load) for pond II. For TP the total inflow loads (irrigation water, rainfall and compost) during lotus cultivation in ponds I and II were 80.8 and 1.9 kg ha^?1 182 day^?1, respectively. TP removal rates in ponds I and II were 84.9 and ?274.1% of total input, respectively. Phosphorus removal was attributed to lotus uptake and soil adsorption. The total outflow loads (infiltration and runoff) of TP during lotus cultivation period were 10.1 kg ha^?1 182 day^?1 (12.5% of total inflow TP load) for pond I, and 6.6 kg ha^?1 182 day^?1 (355.6% of total inflow TP load) for pond II. TN and TP in runoff from pond I (with compost) was higher than that in pond II (without compost), showing that TN and TP in runoff were strongly influenced by compost addition. Therefore, in order to satisfy established water-quality standards, the amount of compost used in lotus cultivation should be evaluated.     

Beef cattle pasture to wetland reconversion: Impact on soil organic carbon and phosphorus dynamics

There is a major need to understand the historical condition and chemical/biological functions of the ecosystems following a conversion of wetlands to agricultural functions. To better understand the dynamics of soil total organic carbon (TOC) and phosphorus (P) during beef cattle pastures to wetland reconversion, soil core samples were collected from the beef cattle pasture and from the natural wetland at Plant City, FL, during five summer seasons (2002–2007). The levels of TOC and soil P were significantly affected by changing land use and hydrology. Draining natural wetlands to grazed pastures resulted in very pronounced reduction of TOC from 180.1 to 5.4 g g^?1. Cumulative concentrations of total phosphorus (TP) in soils (1134 mg kg^?1) under drained condition are two to three times lower than those in soils (2752 mg kg^?1) under flooded condition over the periods of land use reconversion. There was a declining trend (r = 0.82**; p ≤ 0.01) in total soil P from natural wetland (763 mg kg^?1) to altered pastures (340 mg kg^?1), largely as organic-bound P (natural wetland, 48%; grazed pastures, 44%; altered pastures, 29%). These results are important in establishing baseline information on soil properties in pasture and wetland prior to restoring and reconverting pasture back to wetland conditions. The results further suggest that changes in soil properties due to changing land use and hydrologic conditions (drying and re-wetting) could be long lasting.     

Phosphorus mass load and outflow concentration relationships in stormwater treatment areas for Everglades restoration

Mass loading and outflow phosphorus (P) relationships were investigated for four stormwater treatment area (STA) wetlands in south Florida. These systems, ranging in size from 350 to 2670 ha, were constructed by the South Florida Water Management District (SFWMD) for Everglades restoration, and approaches currently are being investigated for optimizing their design and management. We analyzed 2–7 years of P removal data from 10 independent STA process trains using system classifications based on dominant vegetation type, which was either emergent aquatic vegetation (EAV) or submerged aquatic vegetation (SAV), and prior land use, which was either recently farmed (RF) or historic wetland (HW). We found that a 1–2 year history of mass loading rates (MLR) at or below ∼1.3 g P/m²/year in STA process trains provided a high likelihood of achieving outflow total P (TP) concentrations less than ∼30 μg/L. Statistical analyses revealed that P removal performance of SAV and EAV-HW systems was generally superior to that of EAV-RF systems. These performance differences were corroborated with data from seven other non-STA Florida-based treatment wetlands. Furthermore, in the subset of SAV and continuously flooded EAV-HW data with P MLRs at or below ∼2 g/m²/year, outflow P concentrations were consistently between 10 and 20 μg/L, mass removal efficiencies were consistently above 85%, and the wetlands demonstrated a substantial resilience to small-to-moderate pulsed inflow P loads. Despite 16 occurrences in these full-scale STA data of annual flow-weighted mean outflow P concentrations between 10 and 20 μg/L, no significant MLR–P relationships were identified for targeting specific P concentrations in this range.     

Poly(3-hydroxybutyrate) production by Cupriavidus necator using waste glycerol

Polyhydroxyalkanoates (PHAs) have been recognized as good substitutes for the non-biodegradable petrochemically produced polymers. However, their high (real or estimated) current production cost limits their industrial applications. This work exploits two strategies to enhance PHAs substitution potential: the increase in PHA volumetric productivity in high density cultures and the use of waste glycerol (GRP), a by-product from the biodiesel industry, as primary carbon source for cell growth and polymer synthesis. Cupriavidus necator DSM 545 was used to accumulate poly(3-hydroxybutyrate) (P(3HB)) from GRP and from commercial glycerol (PG) as control substrate. On PG, productivities between 0.6 g_PHB L^?1 h^?1 and 1.5 g_PHB L^?1 h^?1 were attained. The maximum cell DW was 82.5 g_DW L^?1, the P(3HB) content being 62%. When GRP was used, 68.8 g_DW L^?1 with a P(3HB) accumulation of 38% resulting in a final productivity of 0.84 g_PHB L^?1 h^?1 was obtained. By decreasing the biomass concentration at which accumulation was triggered, a productivity of 1.1 g_PHB L^?1 h^?1 (50% P(3HB), w/w) was attained using GRP. P(3HB) molecular weights (M_w) ranged from 7.9 × 10⁵ to 9.6 × 10⁵ Da.     

The role of plants in the removal of nutrients at a constructed wetland treating agricultural (dairy) wastewater,Ontario, Canada

The South Nation River Watershed, in eastern Ontario, Canada, is an agricultural watershed impacted by excess nutrient loading primarily from agricultural activities. A constructed wetland for the treatment of agricultural wastewater from a 150-cow dairy operation in this watershed was monitored in its eighth operating season to evaluate the proportion of total nitrogen (TN) (approximated by total Kjeldahl nitrogen (TKN) due to low NO₃⁻) and total phosphorus (TP) removal that could be attributed to storage in Typha latifolia L. and Typha angustifolia L., which dominate this system. Nutrient loading rates were high, with 16.2 kg ha⁻¹ d⁻¹ N and 3.4 kg ha⁻¹ d⁻¹ P entering the wetland and loading the first wetland cell. Plant uptake accounted for 0.7% of TKN removal when the vegetated free water surface cells were considered together. However, separately, in the second wetland cell with lower N and P loading rates, plants accounted for 9% of TKN, 21% of NH₄⁺ and 5% of TP removal. Plant uptake was significant to overall removal given wetland age and nutrient loading. Nutrient storage during the growing season at this constructed wetland helped reduce the nutrient load entering the watershed, already stressed by intensive local agriculture.     

Criteria to distinguish between natural situations and illegal use of boldenone,boldenone esters and boldione in cattle: 2. Direct measurement of 17β-boldenone sulpho-conjugate in calf urine by liquid chromatography–high resolution and tandem mass spectrometry

Boldenone is banned in the European Union (Directive 96/22/EC) as growth promoter for meat producing animals. Boldione (ADD), boldenone and boldenone esters (mainly the undecylenate form) are commercially available as anabolic preparations, either to the destination of human, horse or cattle. Since the late 90s, the natural occurrence of boldenone metabolites has been reported in cattle. According to EU regulation, the unambiguous demonstration of boldenone administration in bovine urine should be provided on the basis of boldenone identification in the corresponding conjugate fraction. An analytical method has been developed and validated according to current standards with main concern to the measurement of intact 17β-boldenone-sulphate. The analytical procedure included direct extraction–purification of target analyte on octadecylsilyl cartridges and direct detection of phase II metabolite by liquid chromatography (negative electrospray), tandem mass spectrometry (QqQ) or high resolution mass spectrometry (Orbitrap?). Decision limit (CCα) and detection capability (CCβ) were respectively 0.2 μg L^?1 and 0.4 μg L^?1 on triple quadrupole and 0.1 μg L^?1 and 0.2 μg L^?1 on hybrid system. The method was successfully applied to the analysis of incurred samples collected in different experiments. 17β-Boldenone-sulphate was measurable up to 36 h after oral administration of boldione, and 30 days after 17β-boldenone undecylenate intra-muscular injection. This conjugate form was never detected in non-treated animals, confirming its status of definitive candidate marker for boldenone administration in calf.     

Kinetics of pollutant removal from domestic wastewater in a tropical horizontal subsurface flow constructed wetland system: Effects of hydraulic loading rate

The treatment capacity of constructed wetlands is expected to be high in tropical areas because of the warm temperatures and the associated higher rates of microbial activity. A pilot scale horizontal subsurface flow constructed wetland system filled with river sand and planted with Phragmites vallatoria (L.) Veldkamp was set up in the southern part of Vietnam to assess the treatment capacity and the removal rate kinetics under tropical conditions. The system received municipal wastewater at four hydraulic loading rates (HLRs) of 31, 62, 104 and 146 mm day^?1. Removals of TSS, BOD₅ and COD were efficient at all HLRs with mean removal rates of 86–95%, 65–83% and 57–84%, respectively. Removals of N and P decreased with HLRs and were: NH₄-N 0–91%; TN 16–84% and TP 72–99%. First-order area-based removal rate constants (k, m year^?1) estimated from sampling along the length of the wetland from inlet to outlet at the four HLRs were in the range of 25–95 (BOD₅), 22–30 (COD), 31–115 (TSS), 5–24 (TN and TKN) and 41–84 (TP) at background concentrations (C*) of 5, 10, 0, 1.5 and 0 mg L^?1, respectively. The estimated k-values should not be used for design purposes, as site-specific differences and stochastic variability can be high. However, the study shows that domestic wastewater can be treated in horizontal subsurface flow constructed wetland systems to meet even the most stringent Vietnamese standards for discharge into surface waters.     

Denitrification of nitrified and non-nitrified swine lagoon wastewater in the suspended sludge layer of treatment wetlands

One method for managing livestock-wastewater N is the use of treatment wetlands. The objectives of this study were to (1) assess the magnitude of denitrification enzyme activity (DEA) in the suspended sludge layers of bulrush and cattail treatment wetlands, and (2) evaluate the impact of nitrogen pretreatment on DEA in the suspended sludge layer. The study used four wetland cells (3.6 m × 33.5 m) with two cells connected in series. Each wetland series received either untreated or partially nitrified swine wastewater from a single-cell anaerobic lagoon. The DEA of the suspended sludge layers of the constructed wetlands was measured by the acetylene inhibition method. The control DEA treatment for the sludge layer had a mean rate of 18 μg N₂O-N g^?1 sludge h^?1. Moreover, the potential DEA (nitrate-N and glucose-C added) mean was very large, 121 μg N₂O-N g^?1 sludge h^?1. These DEA rates are consistent with the previously reported high levels of nitrogen removal by denitrification from these wetlands, especially when the wastewater was partially nitrified. Stepwise regression using distance within the wetland, wastewater nitrate, and wastewater ammonia explained much of the variation in DEA rates. In both bulrush and cattail wetlands, there were zones of very high potential DEA.     

Cultivation impacts soil microbial dynamics in dry tropical forest ecosystem in India

We studied for two years the seasonal changes in plant available nitrate and ammonium nitrogen (N), nitrification, N-mineralization, microbial biomass carbon (MBC), nitrogen (MBN) and phosphorus (MBP) in two forest and three cropland sites, derived from a tropical forest ecosystem of India. Results indicated that seasonal values of nitrate N, ammonium N and phosphate P ranged from 7.33–12.99, 5.1–10.22 and 4.0–7.8 μg g^?1 in forest and 4.13–9.26, 9.35–14.46 and 2.8–5.8 μg g^?1 in cropland ecosystems, respectively, with maximum values in summer and minimum in rainy seasons. Nitrification and N-mineralization values varied from 6–28 and 4–26 μg g^?1 mo^?1 in forest and 3–14 μg g^?1 mo^?1 and 4–17 μg g^?1 mo^?1 in cropland, with maximum values in rainy season and minimum in summer season.MBC, MBN MBP ranged from 393–753, 34–80 and 16–36 μg g^?1 in forests and 186–414, 21–41 and 11–22 μg g^?1 in croplands, being maximum in summer and minimum in rainy seasons. There was gradual increase in the values of inorganic N, nitrification, N-mineralization and MBC, MBN and MBP along the age of cropland. Analysis of variance indicated significant difference in the concentration of inorganic N, nitrification and N-mineralization and MBC, MBN and MBP due to sites and seasons.Cultivation caused decline in the mean annual organic C, N and P by 42%, 29% and 13%. The values of nitrate N were decreased by 23–38%, while ammonium N was increased by 39–74%. Nitrification and N-mineralization values were reduced by 39–63% and 40–60%, respectively. Microbial C, N and P were reduced by 44–54%, 41–50% and 28–44%, respectively. Nonetheless, the contribution of soil microbial biomass reflected in total N was enhanced from 4.76% in forest to 5.03% in cropland ecosystem. Enhancement of plant available ammonium-N and microbial contribution in total N are an indicator of natural conserving mechanism to check the nitrogen loss from the nutrient poor agro-ecosystem.     

Biological and molecular responses of Chironomus riparius (Diptera,Chironomidae) to herbicide 2,4-D (2,4-dichlorophenoxyacetic acid)

2,4-Dichlorophenoxyacetic acid (2,4-D) is an agricultural contaminant found in rural ground water. It remains to be determined whether neither 2,4-D poses environmental risks, nor is the mechanism of toxicity known at the molecular level. To evaluate the potential ecological risk of 2,4-D, we assessed the biological parameters including the survival rate, adult sex ratio of emerged adults, and mouthpart deformities in Chironomus riparius after long-term exposure to 2,4-D. The larvae were treated with 0.1, 1 or, 10 μg L^? 1 of 2,4-D for short- and long-term exposure periods. The sex ratio was changed in C. riparius exposed to only 10 μg L^? 1 of 2,4-D, whereas mouthpart deformities were observed as significantly higher in C. riparius exposed to 0.1 μg L^? 1 of 2,4-D. Survival rates were not significantly affected by 2,4-D. Furthermore, we evaluated the molecular and biochemical responses of biomarker genes such as gene expression of heat shock proteins (HSPs), ferritins and glutathione S-transferases (GSTs) in C. riparius exposed to 2,4-D for 24 h. The expressions of HSP70, HSP40, HSP90 and GST levels in C. riparius were significantly increased after exposure to a 10 μg L^? 1 concentration of 2,4-D, whereas ferritin heavy and light chain gene expressions were significantly increased at all concentrations of 2,4-D exposure. Finally, these results may provide an important contribution to our understanding of the toxicology of 2,4-D herbicide in C. riparius. Moreover, the 2,4-D-mediated gene expressions may be generated by 2,4-D is the causative effects on most probable cause of the observed alterations. These biological, molecular and morphological parameters and the measured parameters can be used to monitor 2,4-D toxicity in an aquatic environment.     

On-line preconcentration/determination of zinc from water,biological and food samples using synthesized chelating resin and flame atomic absorption spectrometry

An on-line flow injection pre-concentration-flame atomic absorption spectrometry method was developed to determine trace zinc in water (tap, dam, and well water), biological (hair and nail), and liver samples. As a solid phase extractant, a synthesized new chelating resin, poly(2-thiozylmethacrylamide-co-divinylbenzene-co-2-acrylamido-2-methyl-1-propane sulfonic acid) was used. The resin was characterized by Fourier transform infrared spectroscopy, elemental analysis, and surface area by nitrogen sorption. A pre-concentration factor of 40-fold for a sample volume of 12.6 mL was obtained by using the time-based technique. The detection limit for the pre-concentration method was found to be 2.2 μg L^?1. The precision (as RSD,%) for 10 replicate determinations at the 0.04 μg mL^?1 Zn concentration was 1.2%. The calibration graph using the pre-concentration system for zinc was linear with a correlation coefficient of 0.998 in the concentration range from 0.005 to 0.05 μg mL^?1. The applicability and accuracy of the developed method were estimated by the analysis spiked water, biological, liver samples (83–105%), and also certified reference material TMDA-70 (fortified lake water) and SPS-WW1 Batch 111-Wastewater. The results were in agreement with the certified values.     

Serum selenium levels of the very low birth weight premature newborn infants with bronchopulmonary dysplasia

BackgroundThe selenium (Se) is an essential trace element that has a critical role in synthesis and activity of a number of selenoproteins with protective properties against free radical damage. This study was conducted to detect the serum Se concentration in very low birth weight (VLBW) preterm infants and its association with bronchopulmonary dysplasia (BPD).Materials and methodsCord blood Se concentration was determined in 54 neonates with gestation age 30 week or less. Another sample was obtained from these infants at day 28 of birth and serum Se levels were measured by atomic absorption spectrophotometer. All neonates were followed for oxygen dependency at 28 day after birth and 36 week postmenstrual age.ResultsThe mean cord blood Se concentration in studied neonates was 64.78 ± 20.73 μg L^?1. Serum Se concentration was 60.33 ± 26.62 μg L^?1 at age 28-day. No significant correlation was observed for serum Se concentration at birth and at one month after birth (r = ?0.04, p = 0.72). BPD was diagnosed in 25 neonates (46%). The mean serum Se concentration at one month was 57.16 ± 29.68 μg L^?1 in patients with BPD (25 cases) and 63.27 ± 23.6 μg L^?1 in 29 patients without BPD (p = 0.40).ConclusionIn our study, serum Se concentration at 28 day of birth was lower than cord blood levels in preterm neonates, but we have not found significant difference among patients who had BPD or not with respect to serum Se concentrations at this age.     

Performance of a composite membrane bioreactor treating toluene vapors: Inocula selection,reactor performance and behavior under transient conditions

In this study, a membrane biofilm reactor performance for toluene as a model pollutant is presented. A composite membrane consisting of a porous polyacrylonitrile (PAN) support layer coated with a very thin (0.3 μm) dense polydimethylsiloxane (PDMS) top layer was used. Batch experiments were performed to select an appropriate inocula (slaughterhouse wastewater treatment sludge with a specific toluene consumption rate of 118 ± 23 μg g^?1 VSS L^?1) among the three available sources of inoculums. The maximum elimination capacity gas-side reactor volume based (EC)_v and membrane based (EC)_{m, max} obtained were 609 g m^?3 h^?1 and 1.2 g m^?2 h^?1 respectively, which is much higher than other membrane bioreactors. Further experiments involved the study of the membrane biofilm reactor flexibility when operational parameters as temperature, loading rate etc. were modified. In all cases, the membrane biofilm reactor showed a rapid adaptation and new steady-states were obtained within hours. Overall, the results illustrate that membrane bioreactors can potentially be a good option for treatment of air pollutants such as toluene.     

Factors influencing the efficiency of constructed wetlands used for the treatment of intensive trout farm effluent

In this paper the factors influencing treatment performance of subsurface flow constructed wetlands (SSF wetlands) treating aquaculture effluents were identified and quantified. The financial impact of advanced aquaculture effluent treatment with SSF wetlands was calculated.It is the first long-term, commercial-scale trial of SSF wetland treatment for effluents from intensive trout farming, a highly diluted effluent at very high flow rates (mean total phosphorous concentration 0.34 mg L^?1 at 14.3 L s^?1). The 12-month survey provided the opportunity to generate calculation fundamentals for the commercial application of SSF wetlands for aquaculture. Treatment efficiencies of up to 75–86% for total ammonia nitrogen (TAN), biological oxygen demand (BOD₅) and total suspended solids (TSS) were achieved. The daily area retention rate per square meter wetland area was between 2.1 and 4.5 g for TAN and between 30 and 98 g for TSS.The performance of the six wetland cells comprising three replicated hydraulic loading groups (14.5, 6.9, 3.3 m³ m^?2 day^?1) was monitored, offering the possibility to identify factors influencing treatment efficiency through multifactor analysis. These factors turned out to be nutrient inflow concentration, hydraulic loading rate and accumulation of TSS within the wetland bed, the only time-dependent factor. Factors such as vegetation period and fish harvesting were shown to be of significant but negligible importance.Inflow nutrient concentration is determined by production intensity, husbandry conditions, feed quality and any pre-treatment of effluent. Hydraulic load is determined by the space and budget available for SSF construction. TSS accumulation in the wetland is influenced by pre-treatment of the solid fraction prior to the wetland and determines the wetland service lifetime.From these factors the expenses of commercial wetland application can be estimated, leading to a cost increase around €0.20 kg^?1 fish produced (less than 10% of production costs) and therefore confirm the commercial feasibility of SSF wetland treatment.     

Environmental indicators for estimating the potential soil respiration rate in alpine zone

Soil respiration is the main form of carbon flux from soil to atmosphere in the global carbon cycle. The effect of temperature on soil respiration rate is important in evaluating the potential feedback of soil organic carbon to global warming. We incubated soils from the alpine meadow zone and upper rocky zone along an altitudinal gradient (4400–5500 m a.s.l.) on the Tibetan Plateau under various temperature and soil moisture conditions. We evaluated the potential effects of temperature and soil moisture on soil respiration and its variation across altitudes. Soil respiration rates increased as the temperature increased. At 60% of soil water content, they averaged 0.21–5.33 μmol g soil⁻¹ day⁻¹ in the alpine meadow zone and 0.11–0.50 μmol g soil⁻¹ day⁻¹ in the rocky zone over the experimental temperature range. Soil respiration rates in the rocky zone did not increase between 25 and 35 °C, probably because of heat stress. Rates of decomposition of organic matter were high in the rocky zone, where the CN ratio was smaller than in the middle altitudes. Soil respiration rates also increased with increasing soil water content from 10% to 80% at 15 °C, averaging 0.04–2.00 μmol g soil⁻¹ day⁻¹ in the alpine meadow zone and 0.03–0.35 μmol g soil⁻¹ day⁻¹ in the rocky zone. Maximum respiration rates were obtained in the middle part of the alpine slope in any case of experimental temperature and soil moisture. The change patterns in soil respiration rate along altitude showed similar change pattern in soil carbon content. Although the altitude is a variable including various environmental factors, it might be used as a surrogate parameter of soil carbon content in alpine zone. Results suggest that temperature, soil moisture and altitude are used as appropriate environmental indicators for estimating the spatial distribution of potential soil respiration in alpine zone.     

Growth of the fungus Paecilomyces lilacinus with n-hexadecane in submerged and solid-state cultures and recovery of hydrophobin proteins

The filamentous fungus Paecilomyces lilacinus was grown on n-hexadecane in submerged (SmC) and solid-state (SSC) cultures. The maximum CO₂ production rate in SmC (V_max = 11.7 mg CO₂ L_g⁻¹ day⁻¹) was three times lower than in SSC (V_max = 40.4 mg CO₂ L_g⁻¹ day⁻¹). The P. lilacinus hydrophobin (PLHYD) yield from the SSC was 1.3 mg PLHYD g protein⁻¹, but in SmC, this protein was not detected. The PLHYD showed a critical micelle concentration of 0.45 mg mL⁻¹. In addition, the PLHYD modified the hydrophobicity of Teflon from 130.1 ± 2° to 47 ± 2°, forming porous structures with some filaments <1 μm and globular aggregates <0.25 μm diameter. The interfacial studies of this PLHYD could be the basis for the use of the protein to modify surfaces and to stabilize compounds in emulsions.     

A green and efficient procedure for the preconcentration and determination of cadmium,nickel and zinc from freshwater,hemodialysis solutions and tuna fish samples by cloud point extraction and flame atomic absorption spectrometry

Cloud point extraction (CPE) was used to simultaneously preconcentrate trace-level cadmium, nickel and zinc for determination by flame atomic absorption spectrometry (FAAS). 1-(2-Pyridilazo)-2-naphthol (PAN) was used as a complexing agent, and the metal complexes were extracted from the aqueous phase by the surfactant Triton X-114 ((1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol). Under optimized complexation and extraction conditions, the limits of detection were 0.37 μg L⁻¹ (Cd), 2.6 μg L⁻¹ (Ni) and 2.3 μg L⁻¹ (Zn). This extraction was quantitative with a preconcentration factor of 30 and enrichment factor estimated to be 42, 40 and 43, respectively. The method was applied to different complex samples, and the accuracy was evaluated by analyzing a water standard reference material (NIST SRM 1643e), yielding results in agreement with the certified values.