利用糖蜜发酵生产生物降解塑料PHB的研究

由Ａｌｃａｌｉｇｅｎｅｓｌａｔｕｓ经单菌落分离,从中筛选到一株高效利用糖蜜产聚羟基丁酸（ＰＨＢ）的优良菌株１０１８。在６Ｌ台式发酵罐（Ｎ.Ｂ.Ｓ）中,进行了该菌利用甜菜糖蜜和甘蔗糖蜜积累ＰＨＢ的分批补料培养的研究。结果表明,培养５４ｈ左右发酵液中细胞干重达７０～８５ｇ／Ｌ,ＰＨＢ含量占细胞干重的６０％～７０％,生产强度１．０ｇＰＨＢ／Ｌ／ｈ以上;发酵液经非有机溶剂提取制得ＰＨＢ产品,纯度９５％,提取收率８０％以上。     

Poly(3-Hydroxybutyrate) Production with High Productivity and High Polymer Content by a Fed-Batch Culture of Alcaligenes latus under Nitrogen Limitation

Alcaligenes latus has been known to produce poly(3-hydroxybutyrate) (PHB) in a growth-associated manner even under nutrient-sufficient conditions. However, the PHB content obtained by fed-batch culture was always low, at ca. 50%, which makes the recovery process inefficient. In this study, the effect of applying nitrogen limitation on the production of PHB by A. latus was examined. In flask and batch cultures, the PHB synthesis rate could be increased considerably by applying nitrogen limitation. The PHB content could be increased to 87% by applying nitrogen limitation in batch culture, which was considerably higher than that typically obtainable (50%) under nitrogen-sufficient conditions. In fed-batch culture, cells were first cultured by the DO-stat feeding strategy without applying nitrogen limitation. Nitrogen limitation was applied at a cell concentration of 76 g (dry cell weight)/liter, and the sucrose concentration was maintained within 5 to 20 g/liter. After 8 h of nitrogen limitation, the cell concentration, PHB concentration, and PHB content reached 111.7 g (dry cell weight)/liter, 98.7 g/liter, and 88%, respectively, resulting in a productivity of 4.94 g of PHB/liter/h. The highest PHB productivity, 5.13 g/liter/h, was obtained after 16 h.     

Production of Poly(3-hydroxybutyrate) by fed-batch culture of recombinant Escherichia coli with a highly concentrated whey solution

Fermentation strategies for the production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes were developed. The pH-stat fed-batch cultures of E. coli CGSC 4401 harboring pJC4, a stable plasmid containing the A. latus PHA biosynthesis genes, were carried out with a concentrated whey solution containing 280 g of lactose equivalent per liter. Final cell and PHB concentrations of 119.5 and 96.2 g/liter, respectively, were obtained in 37.5 h, which resulted in PHB productivity of 2.57 g/liter/h.     

High cell density culture of metabolically engineered Escherichia coli for the production of poly(3-hydroxybutyrate) in a defined medium

A recombinant Escherichia coli strain XL1-Blue harboring a stable high-copy-number plasmid pSYL107 containing the Alcaligenes eutrophus polyhydroxyalkanoate biosynthesis genes and the Escherichia coli ftsZ gene was employed for the production of poly(3-hydroxybutyrate) (PHB) by fed-batch culture in a defined medium. Suppression of filamentation by overexpressing the cell division protein FtsZ allowed production of PHB to a high concentration (77 g/L) with high productivity (2 g/L/h) in a defined medium, which was not possible with the recombinant E. coli that underwent filamentation. Further optimization of fed-batch culture condition resulted in PHB concentration of 104 g/L in a defined medium, which was the highest value reported to date by employing recombinant E. coli.     

Production of poly(3-hydroxybutyric acid) by fed-batch culture of Alcaligenes eutrophus with glucose concentration control

Alcaligenes eutrophus NCIMB 11599 was cultivated to produce poly(3-hydroxybutyric acid) (PHB) from glucose by the automatic fed-batch culture technique. The glucose concentration of the culture broth was controlled at 10 to 20 g/L by two methods: using exit gas data obtained from a mass spectrometer and using an on-line glucose analyzer. The effect of ammonium limitation on PHB synthesis at different culture phases was studied. The final cell concentration, PHB concentration, and PHB productivity increased as ammonia feeding was stopped at a higher cell concentration. High concentrations of PHB (121 g/L) and total cells (164 g/L) were obtained in 50 h when ammonia feeding was stopped at the cell concentration of 70 g/L. The maximum PHB content reached 76% of dry cell weight and the productivity was 2.42 g/L h with the yield of 0.3 g PHB/g glucose.     

Production of poly(3-hydroxybutyrate) by fed-batch culture of filamentation-suppressed recombinant Escherichia coli.

Recombinant Escherichia coli XL1-Blue harboring a high-copy-number plasmid containing the Alcaligenes eutrophus polyhydroxyalkanoate synthesis genes could efficiently synthesize poly(3-hydroxybutyrate) (PHB) in a complex medium containing yeast extract and tryptone but not in a defined medium. One of the reasons for the reduced PHB production in a defined medium was thought to be severe filamentation of cells in this medium. By overexpressing an essential cell division protein, FtsZ, in recombinant E. coli producing PHB, filamentation could be suppressed and PHB could be efficiently produced in a defined medium. A high PHB concentration of 149 g/liter, with high productivity of 3.4 g of PHB/liter/h, could be obtained by the pH-stat fed-batch culture of the filamentation-suppressed recombinant E. coli in a defined medium. It was also found that insufficient oxygen supply at a dissolved oxygen concentration (DOC) of 1 to 3% of air saturation during active PHB synthesis phase did not negatively affect PHB production. By growing cells to the concentration of 110 g/liter and then controlling the DOC in the range of 1 to 3% of air saturation, a PHB concentration of 157 g/liter and PHB productivity of 3.2 g of PHB/liter/h were obtained. For the scale-up studies, fed-batch culture was carried out in a 50-liter stirred tank fermentor, in which the DOC decreased to zero when cell concentration reached 50 g/liter. However, a relatively high PHB concentration of 101 g/liter and PHB productivity of 2.8 g of PHB/liter/h could still be obtained, which demonstrated the possibility of industrial production of PHB in a defined medium by employing the filamentation-suppressed recombinant E. coli.     

Production of poly(3-hydroxybutyrate) by high cell density fed-batch culture of Alcaligenes eutrophus with phospate limitation

High cell density fed-batch fermentation of Alcaligenes eutrophus was carried out for the production of poly(3-hydroxybutyrate) (PHB) in a 60-L fermentor. During the fermentation, pH was controlled with NH(4)OH solution and PHB accumulation was induced by phosphate limitation instead of nitrogen limitation. The glucose feeding was controlled by monitoring dissolved oxygen (DO) concentration and glucose concentration in the culture broth. The glucose concentration fluctuated within the range of 0-20 g/L. We have investigated the effect of initial phosphate concentration on the PHB production when the initial volume was fixed. Using an initial phosphate concentration of 5.5 g/L, the fed-batch fermentation resulted in a final cell concentration of 281 g/L, a PHB concentration of 232 g/L, and a PHB productivity of 3.14 g/L . h, which are the highest values ever reported to date. In this case, PHB content, cell yield from glucose, and PHB yield from glucose were 80, 0.46, and 0.38% (w/w), respectively. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55: 28-32, 1997.     

重组巴氏毕赤酵母高密度发酵表达rHSA

对基因工程菌Pichiapastoris的摇瓶发酵条件进行了试验 ,并根据摇瓶发酵的优化结果进行了补料分批高密度发酵。在摇瓶发酵时 ,甲醇诱导基因工程菌P .pastoris表达重组人血清白蛋白的发酵周期为 96h ;甲醇的最佳诱导浓度为 1 0g L ;发酵pH范围为 5 72～ 6 5 9;在摇瓶培养时 ,随着接种量的增加 ,虽然目的蛋白表达量缓慢增加 ,但单位细胞光密度的蛋白产率却明显下降 ,符合y =1 2 941x- 0 50 59方程 (线性相关系数r=0 9789) ,其限制性因子很可能为溶氧。在分批发酵 ,接种量为 1 0 %且种子细胞光密度 (OD60 0 )为 2 0左右时 ,细胞生长的延迟期为 2 1 1h左右 ,细胞生长光密度与培养时间的关系模型为 :y =0 7841e0 .2 3 19t(线性相关系数r=0 .993 6 ) ;在补料发酵时细胞干重浓度可达到 1 1 5g L— 1 6 0g L ,在 1 2 0h重组人血清白蛋白表达量最大达到 3 6g L。     

Model-based intensification of a fed-batch microbial process for the maximization of polyhydroxybutyrate (PHB) production rate

An integrated metabolic–polymerization–macroscopic model, describing the microbial production of polyhydroxybutyrate (PHB) in Azohydromonas lata bacteria, was developed and validated using a comprehensive series of experimental measurements. The model accounted for biomass growth, biopolymer accumulation, carbon and nitrogen sources utilization, oxygen mass transfer and uptake rates and average molecular weights of the accumulated PHB, produced under batch and fed-batch cultivation conditions. Model predictions were in excellent agreement with experimental measurements. The validated model was subsequently utilized to calculate optimal operating conditions and feeding policies for maximizing PHB productivity for desired PHB molecular properties. More specifically, two optimal fed-batch strategies were calculated and experimentally tested: (1) a nitrogen-limited fed-batch policy and (2) a nitrogen sufficient one. The calculated optimal operating policies resulted in a maximum PHB content (94% g/g) in the cultivated bacteria and a biopolymer productivity of 4.2 g/(l h), respectively. Moreover, it was demonstrated that different PHB grades with weight average molecular weights of up to 1513 kg/mol could be produced via the optimal selection of bioprocess operating conditions.

     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli arcA</Emphasis> mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the 'one-factor-at-a-time' technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett-Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box-Wilson design. Under such optimized conditions (22.02 g l(-1) glycerol, 1.78 g l(-1) CAS, and 1.83 g l(-1) inoculum) microaerobic batch cultures gave rise to 8.37 g l(-1) CDW and 3.52 g l(-1) PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l(-1). After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l(-1), respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures.     

A simple structured mathematical model for biopolymer (PHB) production

Economic production technology for a biodegradable polymer (poly-beta-hydroxybutyrate, PHB) is urgently required to replace conventional polymers, which have an inherent disadvantage of staying in the environment forever. Various approaches have been applied for improving the productivity and reducing the production cost, which are considered to be the two major problems associated with industrial production of PHB. One of the engineering approaches to improve PHB productivity could be to design and implement model-based fed-batch cultivations to provide desirable nutrient availability. In the present study, growth and intracellular biopolymer storage kinetics of Ralstonia eutropha was studied in a batch cultivation process. It featured 19.7 g/L biomass and 10.89 g/L PHB with a productivity of 0.18 g/L.h. The effect of carbon, nitrogen, and phosphate limitations and inhibitions on growth was studied in detail. A structured model featuring typical growth limitations and/or possible inhibitions was then proposed. The value of the model parameters was found by minimizing the difference between experimental value and model simulation at all data points and for all process variables. The optimal batch model parameter values obtained above were used to solve the differential equations numerically. The simulated data obtained in this way was then compared with the experimental data to establish the validity of the batch model. The proposed model was then compared with literature reported mathematical models to reconfirm its accuracy. Statistical validity of the developed model and historical models to describe the observed experimental kinetics was then investigated to reinforce the accuracy of the developed simple model.     

Production of poly(3-hydroxybutyrate) from whey by cell recycle fed-batch culture of recombinant Escherichia coli

A new fermentation strategy using cell recycle membrane system was developed for the efficient production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes. By cell recycle, fed-batch cultivation employing an external membrane module, the working volume of fermentation could be constantly maintained at 2.3 l. The final cell concentration, PHB concentration and PHB content of 194 g l^–1, 168 g l^–1 and 87%, respectively, were obtained in 36.5 h by the pH-stat cell recycle fed-batch culture using whey solution concentrated to contain 280 g lactose l^–1 as a feeding solution, resulting in a high productivity of 4.6 g PHB l^–1 h^–1.     

Improvement of heterologous protein productivity using recombinant Yarrowia lipolytica and cyclic fed-batch process strategy

A cyclic fed-batch bioprocess is designed and a significant improvement of rice alpha-amylase productivity of recombinant Yarrowia lipolytica is illustrated. A bioprocess control strategy developed and reported here entails use of a genetically stable recombinant cloned for heterologous protein, use of optimized media for cell growth and enzyme production phases, and process control strategy enabling high cell-density culture and high alpha-amylase productivity. This process control can be achieved through maintaining a constant optimal specific cell growth rate at a predetermined value (i.e., 0.1 h-1), controlling medium feed rate commensurate with the cell growth rate, and maintaining a high cell-density culture (i.e., 60-70 g/L) for high productivity of cloned heterologous protein. The volumetric enzyme productivity (1, 960 units/L. h) achieved from the cyclic fed-batch process was about 3-fold higher than that of the fed-batch culture process (630 units/L. h).     

Experimental optimization of fed-batch culture for poly-beta-hydroxybutyric acid production

The optimal feed rate profiles of glucose and ammonium hydroxide were calculated using a proposed model, and implemented for the production of poly-beta-hydroxybutyric acid (PHB) by Alcaligenes eutrophus. By implementing these optimal feed rates with a high glucose feed concentration of 700 g/L and an ammonium hydroxide concentration of 7%(w/w), it was possible to achieve a high final cell concentration of 141 g/L and a high PHB concentration of 105 g/L in 40 h of fed-batch operation. The PHB productivity was as high as 2.63 g/(L hr). (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 697-705, 1997.     

Multi-stage high cell continuous fermentation for high productivity and titer

We carried out the first simulation on multi-stage continuous high cell density culture (MSC-HCDC) to show that the MSC-HCDC can achieve batch/fed-batch product titer with much higher productivity to the fed-batch productivity using published fermentation kinetics of lactic acid, penicillin and ethanol. The system under consideration consists of n-serially connected continuous stirred-tank reactors (CSTRs) with either hollow fiber cell recycling or cell immobilization for high cell-density culture. In each CSTR substrate supply and product removal are possible. Penicillin production is severely limited by glucose metabolite repression that requires multi-CSTR glucose feeding. An 8-stage C-HCDC lactic acid fermentation resulted in 212.9 g/L of titer and 10.6 g/L/h of productivity, corresponding to 101 and 429% of the comparable lactic acid fed-batch, respectively. The penicillin production model predicted 149% (0.085 g/L/h) of productivity in 8-stage C-HCDC with 40 g/L of cell density and 289% of productivity (0.165 g/L/h) in 7-stage C-HCDC with 60 g/L of cell density compared with referring batch cultivations. A 2-stage C-HCDC ethanol experimental run showed 107% titer and 257% productivity of the batch system having 88.8 g/L of titer and 3.7 g/L/h of productivity. MSC-HCDC can give much higher productivity than batch/fed-batch system, and yield a several percentage higher titer as well. The productivity ratio of MSC-HCDC over batch/fed-batch system is given as a multiplication of system dilution rate of MSC-HCDC and cycle time of batch/fed-batch system. We suggest MSC-HCDC as a new production platform for various fermentation products including monoclonal antibody.     

Effect of phosphate supply and aeration on poly-β-hydroxybutyrate production in Azotobacter chroococcum

The effects of phosphate supply and aeration on cell growth and PHB accumulation were investigated in Azotobacter chroococcum 23 with the aim of increasing PHB production. Phosphate limitation favoured PHB formation in Azotobacter chroococcum 23, but inhibited growth. Azotobacter chroococcum 23 cells demonstrated intensive uptake of orthophosphate during exponential growth. At the highest phosphate concentration (1·5 g/litre) and low aeration the amount of intracellular orthophosphate/g residual biomass was highest. Under conditions of fed-batch fermentation the possibility of controlling the PHB production process by the phosphate level in the cultivation medium was demonstrated. A 36 h fed-batch fermentation resulted in a biomass yield of 110 g/litre with a PHB cellular concentration of 75% dry weight, PHB content 82·5 g/litre, PHB yield Y_P/S = 0·24 g/g and process productivity 2·29 g/litre·h.     

Control of glucose feeding using exit gas data and its application to the production of PHB from tapioca hydrolysate byAlcaligenes eutrophus

Summary A method to estimate the glucose concentration in the culture broth using CO₂ evolution rate (CER) data from a mass spectrometer was developed.Alcaligenes eutrophus was cultivated to produce poly(3-hydroxybutyric acid) (PHB) from tapioca hydrolysate using this method. Thek value (g glucose/mol CO₂), defined as the glucose consumption per CO₂ evolution, decreased with culture time and was automatically changed using CER data. The glucose concentration in the culture broth could be controlled at 10 to 20 g/L. A final cell concentration of 106 g/L, PHB concentration of 61 g/L. and PHB content of 58 % of dry cell weight were obtained after 59 h of cultivation.     

Perfusion culture process plus H2O2 stimulation for efficient astaxanthin production by Xanthophyllomyces dendrorhous

A semicontinuous perfusion culture process (repeated medium renewal with cell retention) was evaluated together with batch and repeated fed-batch processes for astaxanthin production in shake-flask cultures of Xanthophyllomyces dendrorhous. The perfusion process with 25% medium renewal every 12 h for 10 days achieved a biomass density of 65.6 g/L, a volumetric astaxanthin yield of 52.5 mg/L, and an astaxanthin productivity of 4.38 mg/L-d, which were 8.4-fold, 5.6-fold, and 2.3-fold of those in the batch process, 7.8 g/L, 9.4 mg/L, and 1.88 mg/L-d, respectively. The incorporation of hydrogen peroxide (H(2)O(2)) stimulation of astaxanthin biosynthesis into the perfusion process further increased the astaxanthin yield to 58.3 mg/L and the productivity to 4.86 mg/L-d. The repeated fed-batch process with 8 g/L glucose and 4 g/L corn steep liquor fed every 12 h achieved 42.2 g/L biomass density, 36.5 mg/L astaxanthin yield, and 3.04 mg/L-d astaxanthin productivity. The lower biomass and astaxanthin productivity in the repeated fed-batch than in the perfusion process may be mostly attributed to the accumulation of inhibitory metabolites such as ethanol and acetic acid in the culture. The study shows that perfusion process plus H(2)O(2) stimulation is an effective strategy for enhanced astaxanthin production in X. dendrorhous cultures.     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant Escherichia coli arcA mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the ‘one-factor-at-a-time’ technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett–Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box–Wilson design. Under such optimized conditions (22.02 g l⁻¹ glycerol, 1.78 g l⁻¹ CAS, and 1.83 g l⁻¹ inoculum) microaerobic batch cultures gave rise to 8.37 g l⁻¹ CDW and 3.52 g l⁻¹ PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l⁻¹. After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l⁻¹, respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at     

Production of Poly(3-Hydroxybutyrate) by Fed-Batch Culture of Recombinant Escherichia coli with a Highly Concentrated Whey Solution

Fermentation strategies for the production of poly(3-hydroxybutyrate) (PHB) from whey by recombinant Escherichia coli strain CGSC 4401 harboring the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes were developed. The pH-stat fed-batch cultures of E. coli CGSC 4401 harboring pJC4, a stable plasmid containing the A. latus PHA biosynthesis genes, were carried out with a concentrated whey solution containing 280 g of lactose equivalent per liter. Final cell and PHB concentrations of 119.5 and 96.2 g/liter, respectively, were obtained in 37.5 h, which resulted in PHB productivity of 2.57 g/liter/h.