Cancer spheroids derived exosomes reveal more molecular features relevant to progressed cancer

Cancer cell spheroids have been shown to be more physiologically relevant to native tumor tissue than monolayer 2D culture cells. Due to enhanced intercellular communications among cells in spheroids, spheroid secreted exosomes which account for transcellular transportation should exceed those from 2D cell culture and may display a different expression pattern of miRNA or protein. To test this, we employed a widely used pancreatic cancer cell line, PANC-1, to create 3D spheroids and compared exosomes generated by both 2D cell culture and 3D PANC-1 spheroids. We further measured and compared exosomal miRNA and GPC-1 protein expression with qRT-PCR and enzyme-linked immunosorbent assay, respectively. It showed that PANC-1 cells cultured in 3D spheroids can produce significantly more exosomes than PANC-1 2D cells and exosomal miRNA and GPC-1 expression derived from spheroids show more features relevant to the progression of pancreatic cancer. These findings point to the potential importance of using spheroids as in vitro model to study cancer development and progression.     

Antiproliferation activity of Devil's club (Oplopanax horridus) and anticancer agents on human pancreatic cancer multicellular spheroids

Devil's club (DC, Oplopanax horridus) is an important medicinal herb of the Pacific Northwest which has significant antiproliferation activity against a variety of human tumor cell lines in vitro. This study compared the antiproliferation activity of DC extract alone, and in combination with chemotherapeutic agents gemcitabine (GEM), cisplatin (CDDP), and paclitaxel (PTX) on human pancreatic cancer PANC-1 3D spheroids and 2D monolayer cells. 3D tumor spheroids were prepared with a rotary cell culture system. PANC-1 3D spheroids were significantly more resistant to killing by DC extract, GEM and PTX compared to 2D cells, with IC₅₀ levels closer to that observed in vivo. DC extract significantly enhanced the antiproliferation activity of CDDP and GEM at some concentrations. The bioactive compound identified as a polyacetylene showed strong antiproliferation activity against PANC-1 2D cells and 3D spheroids with IC₅₀ at 0.73 ± 0.04 and 3.15 ± 0.16 μM, respectively. 3D spheroids and 2D cells differentially expressed a number of apoptosis related genes. Cell cycle analysis showed that the proportion of cells in S phase was increased and in G2/M phase reduced in 3D spheroids compared to 2D cells. DC extract can potentially be used to enhance the activity of chemotherapeutic agents against pancreatic cancer cells. Use of 3D spheroid model for screening of natural products can potentially increase the efficiency in discovering in vivo bioactive compounds.     

Robotic Production of Cancer Cell Spheroids with an Aqueous Two-phase System for Drug Testing

Cancer cell spheroids present a relevant in vitro model of avascular tumors for anti-cancer drug testing applications. A detailed protocol for producing both mono-culture and co-culture spheroids in a high throughput 96-well plate format is described in this work. This approach utilizes an aqueous two-phase system to confine cells into a drop of the denser aqueous phase immersed within the second aqueous phase. The drop rests on the well surface and keeps cells in close proximity to form a single spheroid. This technology has been adapted to a robotic liquid handler to produce size-controlled spheroids and expedite the process of spheroid production for compound screening applications. Spheroids treated with a clinically-used drug show reduced cell viability with increase in the drug dose. The use of a standard micro-well plate for spheroid generation makes it straightforward to analyze viability of cancer cells of drug-treated spheroids with a micro-plate reader. This technology is straightforward to implement both robotically and with other liquid handling tools such as manual pipettes.     

Assessment of Ovarian Cancer Spheroid Attachment and Invasion of Mesothelial Cells in Real Time

Ovarian cancers metastasize by shedding into the peritoneal fluid and dispersing to distal sites within the peritoneum. Monolayer cultures do not accurately model the behaviors of cancer cells within a nonadherent environment, as cancer cells inherently aggregate into multicellular structures which contribute to the metastatic process by attaching to and invading the peritoneal lining to form secondary tumors. To model this important stage of ovarian cancer metastasis, multicellular aggregates, or spheroids, can be generated from established ovarian cancer cell lines maintained under nonadherent conditions. To mimic the peritoneal microenvironment encountered by tumor cells in vivo, a spheroid-mesothelial co-culture model was established in which preformed spheroids are plated on top of a human mesothelial cell monolayer, formed over an extracellular matrix barrier. Methods were then developed using a real-time cell analyzer to conduct quantitative real time measurements of the invasive capacity of different ovarian cancer cell lines grown as spheroids. This approach allows for the continuous measurement of invasion over long periods of time, which has several advantages over traditional endpoint assays and more laborious real time microscopy image analyses. In short, this method enables a rapid, determination of factors which regulate the interactions between ovarian cancer spheroid cells invading through mesothelial and matrix barriers over time.     

High-throughput Image Analysis of Tumor Spheroids: A User-friendly Software Application to Measure the Size of Spheroids Automatically and Accurately

The increasing number of applications of three-dimensional (3D) tumor spheroids as an in vitro model for drug discovery requires their adaptation to large-scale screening formats in every step of a drug screen, including large-scale image analysis. Currently there is no ready-to-use and free image analysis software to meet this large-scale format. Most existing methods involve manually drawing the length and width of the imaged 3D spheroids, which is a tedious and time-consuming process. This study presents a high-throughput image analysis software application – SpheroidSizer, which measures the major and minor axial length of the imaged 3D tumor spheroids automatically and accurately; calculates the volume of each individual 3D tumor spheroid; then outputs the results in two different forms in spreadsheets for easy manipulations in the subsequent data analysis. The main advantage of this software is its powerful image analysis application that is adapted for large numbers of images. It provides high-throughput computation and quality-control workflow. The estimated time to process 1,000 images is about 15 min on a minimally configured laptop, or around 1 min on a multi-core performance workstation. The graphical user interface (GUI) is also designed for easy quality control, and users can manually override the computer results. The key method used in this software is adapted from the active contour algorithm, also known as Snakes, which is especially suitable for images with uneven illumination and noisy background that often plagues automated imaging processing in high-throughput screens. The complimentary “Manual Initialize” and “Hand Draw” tools provide the flexibility to SpheroidSizer in dealing with various types of spheroids and diverse quality images. This high-throughput image analysis software remarkably reduces labor and speeds up the analysis process. Implementing this software is beneficial for 3D tumor spheroids to become a routine in vitro model for drug screens in industry and academia.     

Analysis of Cell Migration within a Three-dimensional Collagen Matrix

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including embryonic development, wound healing, and immune responses. However, cell migration is also a key mechanism in cancer enabling these cancer cells to detach from the primary tumor to start metastatic spreading. Within the past years various cell migration assays have been developed to analyze the migratory behavior of different cell types. Because the locomotory behavior of cells markedly differs between a two-dimensional (2D) and three-dimensional (3D) environment it can be assumed that the analysis of the migration of cells that are embedded within a 3D environment would yield in more significant cell migration data. The advantage of the described 3D collagen matrix migration assay is that cells are embedded within a physiological 3D network of collagen fibers representing the major component of the extracellular matrix. Due to time-lapse video microscopy real cell migration is measured allowing the determination of several migration parameters as well as their alterations in response to pro-migratory factors or inhibitors. Various cell types could be analyzed using this technique, including lymphocytes/leukocytes, stem cells, and tumor cells. Likewise, also cell clusters or spheroids could be embedded within the collagen matrix concomitant with analysis of the emigration of single cells from the cell cluster/ spheroid into the collagen lattice. We conclude that the 3D collagen matrix migration assay is a versatile method to analyze the migration of cells within a physiological-like 3D environment.     

Live cell division dynamics monitoring in 3D large spheroid tumor models using light sheet microscopy

Background

Multicellular tumor spheroids are models of increasing interest for cancer and cell biology studies. They allow considering cellular interactions in exploring cell cycle and cell division mechanisms. However, 3D imaging of cell division in living spheroids is technically challenging and has never been reported.

Results

Here, we report a major breakthrough based on the engineering of multicellular tumor spheroids expressing an histone H2B fluorescent nuclear reporter protein, and specifically designed sample holders to monitor live cell division dynamics in 3D large spheroids using an home-made selective-plane illumination microscope.

Conclusions

As illustrated using the antimitotic drug, paclitaxel, this technological advance paves the way for studies of the dynamics of cell divion processes in 3D and more generally for the investigation of tumor cell population biology in integrated system as the spheroid model.     

Simplified low-cost methodology to establish,histologically process and analyze three-dimensional cancer cell spheroid arrays

Differently of two-dimensional cell culture, three-dimensional (3D) multicellular spheroid model allows cells to establish cell-cell/cell-matrix interactions over the entire cell surface, more closely mimicking tumor microenvironments and cellular subpopulations with specific standards of morphology, differentiation and gene expression. Thenceforth several methodologies involving or the 3D cell aggregates generation or its histological processing and analysis have emerged, but in general they are laborious, expensive and complex to set up as a routine technique. Thus, we developed a complete methodology, detailing a simple, accessible and low-cost step by step, including 1) the 3D cell aggregate generation using hanging drop technique; 2) providing a simple way to assess morphological parameters of generated spheroids; followed by 3) a multiple and organized histological processing, keeping several individual spheroids inside an agarose apparatus, maintaining a known order and position of each ones, similar to tissue microarray principle; 4) until the last step, where it is allowed a simultaneous histological composition analysis of several spheroid slices, organized side by side, in a same block section, through conventional stainings or 5) immunostaining against different molecular markers. Therefore, the present methodology aims to popularize 3D cell culture, allowing to make this a regular technique in basic cell biology research, once all steps are performed without using onerous reagents, materials or equipment. In addition to bring the agarose apparatus as a simple low cost novelty, allowing high-throughput analysis of several spheroids simultaneously in an organized manner.     

Generation of Multicellular Tumor Spheroids with Microwell-Based Agarose Scaffolds for Drug Testing

Three dimensional multicellular aggregate, also referred to as cell spheroid or microtissue, is an indispensable tool for in vitro evaluating antitumor activity and drug efficacy. Compared with classical cellular monolayer, multicellular tumor spheroid (MCTS) offers a more rational platform to predict in vivo drug efficacy and toxicity. Nevertheless, traditional processing methods such as plastic dish culture with nonadhesive surfaces are regularly time-consuming, laborious and difficult to provide uniform-sized spheroids, thus causing poor reproducibility of experimental data and impeding high-throughput drug screening. In order to provide a robust and effective platform for in vitro drug evaluation, we present an agarose scaffold prepared with the template containing uniform-sized micro-wells in commercially available cell culture plates. The agarose scaffold allows for good adjustment of MCTS size and large-scale production of MCTS. Transparent agarose scaffold also allows for monitoring of spheroid formation under an optical microscopy. The formation of MCTS from MCF-7 cells was prepared using different-size-well templates and systematically investigated in terms of spheroid growth curve, circularity, and cell viability. The doxorubicin cytotoxicity against MCF-7 spheroid and MCF-7 monolayer cells was compared. The drug penetration behavior, cell cycle distribution, cell apoptosis, and gene expression were also evaluated in MCF-7 spheroid. The findings of this study indicate that, compared with cellular monolayer, MCTS provides a valuable platform for the assessment of therapeutic candidates in an in vivo-mimic microenvironment, and thus has great potential for use in drug discovery and tumor biology research.     

Establishment and characterization of an in vitro 3D ovarian cancer model for drug screening assays

The acquired drug chemoresistance represents the main challenge of the ovarian cancer treatment. In addition, the absence of an adequate in vitro model able to reproduce the native tumor environment can contribute to the poor success rate of pre-clinical studies of new compounds. Three-dimensional (3D) culture models have been recently used for drug screening purposes due to their ability to reproduce the main characteristics of in vivo solid tumors. Here we describe the establishment and characterization of 3D ovarian cancer spheroids using different adenocarcinoma tumor cell lines (SKOV-3 and OVCAR-3 cells) in two different 3D scaffold-free methods: forced-floating in ultra-low attachment (ULA) plates and hanging drop (HD). Spheroids were evaluated in both 3D cultures in order to establish the best condition to perform the drug response analysis with Paclitaxel, a common drug used to treat ovarian cancer. SKOV-3 and OVCAR-3 spheroids with the desired characteristics (roundness close to 1.0 and diameter in the 200–500 μm range) were obtained using both methods after addition of the methylcellulose (MC) in the culture medium (0.25% and 0.5%, w/v). We also observed the presence of microvilli on the surface of the spheroids, higher presence of apoptotic cells and higher drug resistance, when compared with 2D cultures. The 3D cultures obtained seem to provide more reliable results in terms of drug response than those provided by 2D monolayer culture. The forced floating method was considered more suitable and straightforward to generate ovarian cancer spheroids for drug screening/cytotoxicity assays.     

Using size‐controlled multicellular spheroids of murine adenocarcinoma cells to efficiently establish pulmonary tumors in mice

Previous studies demonstrated that multicellular spheroids developed using polydimethylsiloxane‐based microwells exhibited superior functions, such as insulin secretion from pancreatic cells, over suspended cells. To successfully apply these spheroids, the effect of spheroid size on cellular functions must be determined. In this study, using murine adenocarcinoma colon26 cells, the authors examined whether such spheroids were useful for developing tumor‐bearing animal models, which requires the efficient and stable engraftment of cancer cells at implanted sites and/or metastatic sites. The authors prepared microwells with widths of 360, 450, 560, and 770 μm through a micromolding technique, and obtained colon26 spheroids with average diameters of 169, 240, 272, and 341 μm, respectively. Small and medium spheroids were subsequently used. mRNA levels of integrin β1, CD44, and fibronectin, molecules involved in cell adhesion, increased with increasing colon26 spheroid size. Approximately 1.5 × 10⁴ colon26 cells in suspension or in spheroids were intravenously inoculated into BALB/c mice. At 21 days after inoculation, the lung weight of both colon26 spheroid groups, especially the group injected with small spheroids, was significantly higher than that of mice in the suspended colon26 cell group. These results indicate that controlling cancer cell spheroid size is crucial for tumor development in tumor‐bearing mouse models.     

An on-lattice agent-based Monte Carlo model simulating the growth kinetics of multicellular tumor spheroids

PurposeTo develop an on-lattice agent-based model describing the growth of multicellular tumor spheroids using simple Monte Carlo tools.MethodsCells are situated on the vertices of a cubic grid. Different cell states (proliferative, hypoxic or dead) and cell evolution rules, driven by 10 parameters, and the effects of the culture medium are included. About twenty spheroids of MCF-7 human breast cancer were cultivated and the experimental data were used for tuning the model parameters.ResultsSimulated spheroids showed adequate sizes of the necrotic nuclei and of the hypoxic and proliferative cell phases as a function of the growth time, mimicking the overall characteristics of the experimental spheroids. The relation between the radii of the necrotic nucleus and the whole spheroid obtained in the simulations was similar to the experimental one and the number of cells, as a function of the spheroid volume, was well reproduced. The statistical variability of the Monte Carlo model described the whole volume range observed for the experimental spheroids. Assuming that the model parameters vary within Gaussian distributions it was obtained a sample of spheroids that reproduced much better the experimental findings.ConclusionsThe model developed allows describing the growth of in vitro multicellular spheroids and the experimental variability can be well reproduced. Its flexibility permits to vary both the agents involved and the rules that govern the spheroid growth. More general situations, such as, e. g., tumor vascularization, radiotherapy effects on solid tumors, or the validity of the tumor growth mathematical models can be studied.     

Optimization of the formation of embedded multicellular spheroids of MCF-7 cells: How to reliably produce a biomimetic 3D model

To obtain a multicellular MCF-7 spheroid model to mimic the three-dimensional (3D) of tumors, the microwell liquid overlay (A) and hanging-drop/agar (B) methods were first compared for their technical parameters. Then a method for embedding spheroids within collagen was optimized. For method A, centrifugation assisted cells form irregular aggregates but not spheroids. For method B, an extended sedimentation period of over 24 h for cell suspensions and increased viscosity of the culture medium using methylcellulose were necessary to harvest a dense and regular cell spheroid. When the number was less than 5000 cells/drop, embedded spheroids showed no tight cores and higher viability than the unembedded. However, above 5000 cells/drop, cellular viability of embedded spheroids was not significantly different from unembedded spheroids and cells invading through the collagen were in a sun-burst pattern with tight cores. Propidium Iodide staining indicated that spheroids had necrotic cores. The doxorubicin cytotoxicity demonstrated that spheroids were less susceptible to DOX than their monolayer cells. A reliable and reproducible method for embedding spheroids using the hanging-drop/agarose method within collagen is described herein. The cell culture model can be used to guide experimental manipulation of 3D cell cultures and to evaluate anticancer drug efficacy.     

Multiplexing Spheroid Volume,Resazurin and Acid Phosphatase Viability Assays for High-Throughput Screening of Tumour Spheroids and Stem Cell Neurospheres

Three-dimensional cell culture has many advantages over monolayer cultures, and spheroids have been hailed as the best current representation of small avascular tumours in vitro. However their adoption in regular screening programs has been hindered by uneven culture growth, poor reproducibility and lack of high-throughput analysis methods for 3D. The objective of this study was to develop a method for a quick and reliable anticancer drug screen in 3D for tumour and human foetal brain tissue in order to investigate drug effectiveness and selective cytotoxic effects. Commercially available ultra-low attachment 96-well round-bottom plates were employed to culture spheroids in a rapid, reproducible manner amenable to automation. A set of three mechanistically different methods for spheroid health assessment (Spheroid volume, metabolic activity and acid phosphatase enzyme activity) were validated against cell numbers in healthy and drug-treated spheroids. An automated open-source ImageJ macro was developed to enable high-throughput volume measurements. Although spheroid volume determination was superior to the other assays, multiplexing it with resazurin reduction and phosphatase activity produced a richer picture of spheroid condition. The ability to distinguish between effects on malignant and the proliferating component of normal brain was tested using etoposide on UW228-3 medulloblastoma cell line and human neural stem cells. At levels below 10 µM etoposide exhibited higher toxicity towards proliferating stem cells, whereas at concentrations above 10 µM the tumour spheroids were affected to a greater extent. The high-throughput assay procedures use ready-made plates, open-source software and are compatible with standard plate readers, therefore offering high predictive power with substantial savings in time and money.     

Fibroblast EXT1-Levels Influence Tumor Cell Proliferation and Migration in Composite Spheroids

Background

Stromal fibroblasts are important determinants of tumor cell behavior. They act to condition the tumor microenvironment, influence tumor growth, support tumor angiogenesis and affect tumor metastasis. Heparan sulfate proteoglycans, present both on tumor and stromal cells, interact with a large number of ligands including growth factors, their receptors, and structural components of the extracellular matrix. Being ubiquitously expressed in the tumor microenvironment heparan sulfate proteoglycans are candidates for playing central roles in tumor-stroma interactions. The objective of this work was to investigate the role of heparan sulfate expressed by stromal fibroblasts in modulating the growth of tumor cells and in controlling the interstitial fluid pressure in a 3-D model.

Methodology/Principal Findings

We generated spheroids composed of fibroblasts alone, or composite spheroids, composed of fibroblasts and tumor cells. Here we show that stromal fibroblasts with a mutation in the heparan sulfate elongating enzyme Ext1 and thus a low heparan sulfate content, formed composite fibroblast/tumor cell spheroids with a significant lower interstitial fluid pressure than corresponding wild-type fibroblast/tumor cell composite spheroids. Furthermore, immunohistochemistry of composite spheroids revealed that the cells segregated, so that after 6 days in culture, the wild-type fibroblasts formed an inner core and the tumor cells an outer layer of cells. For composite spheroids containing Ext1-mutated fibroblasts this segregation was less obvious, indicating impaired cell migration. Analysis of tumor cells expressing the firefly luciferase gene revealed that the changes in tumor cell migration in mutant fibroblast/tumor cell composite spheroids coincided with a lower proliferation rate.

Conclusions/Significance

This is the first demonstration that stromal Ext1-levels modulate tumor cell proliferation and affect the interstitial fluid pressure in a 3-D spheroid model. Learning how structural changes in stromal heparan sulfate influence tumor cells is essential for our understanding how non-malignant cells of the tumor microenvironment influence tumor cell progression.     

Human Neuroendocrine Tumor Cell Lines as a Three-Dimensional Model for the Study of Human Neuroendocrine Tumor Therapy

Neuroendocrine tumors (NETs) are rare tumors, with an incidence of two per 100, 000 individuals per year, and they account for 0.5% of all human malignancies.¹ Other than surgery for the minority of patients who present with localized disease, there is little or no survival benefit of systemic therapy. Therefore, there is a great need to better understand the biology of NETs, and in particular define new therapeutic targets for patients with nonresectable or metastatic neuroendocrine tumors. 3D cell culture is becoming a popular method for drug screening due to its relevance in modeling the in vivo tumor tissue organization and microenvironment.^2,3 The 3D multicellular spheroids could provide valuable information in a more timely and less expensive manner than directly proceeding from 2D cell culture experiments to animal (murine) models.To facilitate the discovery of new therapeutics for NET patients, we have developed an in vitro 3D multicellular spheroids model using the human NET cell lines. The NET cells are plated in a non-adhesive agarose-coated 24-well plate and incubated under physiological conditions (5% CO₂, 37 °C) with a very slow agitation for 16-24 hr after plating. The cells form multicellular spheroids starting on the 3^rd or 4^th day. The spheroids become more spherical by the 6^th day, at which point the drug treatments are initiated. The efficacy of the drug treatments on the NET spheroids is monitored based on the morphology, shape and size of the spheroids with a phase-contrast light microscope. The size of the spheroids is estimated automatically using a custom-developed MATLAB program based on an active contour algorithm. Further, we demonstrate a simple method to process the HistoGel embedding on these 3D spheroids, allowing the use of standard histological and immunohistochemical techniques. This is the first report on generating 3D spheroids using NET cell lines to examine the effect of therapeutic drugs. We have also performed histology on these 3D spheroids, and displayed an example of a single drug''s effect on growth and proliferation of the NET spheroids. Our results support that the NET spheroids are valuable for further studies of NET biology and drug development.     

Cell behavior observation and gene expression analysis of melanoma associated with stromal fibroblasts in a three‐dimensional magnetic cell culture array

A three‐dimensional (3D) multicellular tumor spheroid culture array has been fabricated using a magnetic force‐based cell patterning method, analyzing the effect of stromal fibroblast on the invasive capacity of melanoma. Formation of spheroids was observed when array‐like multicellular patterns of melanoma were developed using a pin‐holder device made of magnetic soft iron and an external magnet, which enables the assembly of the magnetically labeled cells on the collagen gel‐coated surface as array‐like cell patterns. The interaction of fibroblast on the invasion of melanoma was investigated using three types of cell interaction models: (i) fibroblasts were magnetically labeled and patterned together in array with melanoma spheroids (direct‐interaction model), (ii) fibroblasts coexisting in the upper collagen gel (indirect‐interaction model) of melanoma spheroids, and (iii) fibroblast‐sheets coexisting under melanoma spheroids (fibroblast‐sheet model). The fibroblast‐sheet model has largely increased the invasive capacity of melanoma, and the promotion of adhesion, migration, and invasion were also observed. In the fibroblast‐sheet model, the expression of IL‐8 and MMP‐2 increased by 24‐fold and 2‐fold, respectively, in real time RT‐PCR compared to the absence of fibroblasts. The results presented in this study demonstrate the importance of fibroblast interaction to invasive capacity of melanoma in the 3D in vitro bioengineered tumor microenvironment. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013     

β1 Integrins restrict the growth of foci and spheroids

Extracellular matrices (ECM) have important roles for tissue architecture, both as structural and signaling components. Members of the integrin family are the main regulators of ECM assembly and transmitters of signals from the ECM to cells. In this study, we have analyzed the role of integrin subunit β1 in two-dimensional (2D) and three-dimensional (3D) cell cultures using integrin β1 null cells (MEFβ1^?/? and GD25) and their β1 integrin-expressing counterparts. GD25 and GD25β1 cells proliferated with similar kinetics in sub-confluent 2D cultures, whereas GD25 cells attained higher cell numbers in confluent culture and formed foci with fivefold higher frequency than GD25β1 cells. Fibronectin fibrils were abundantly deposited throughout the GD25β1 colonies but strictly limited to the central multilayered area (focus) of GD25 colonies. During 3D growth as spheroids, GD25 continuously increased in size for >21?days while the growth of GD25β1 spheroids ceased after 14?days. Similarly, MEFβ1^?/? cells formed foci and grew as spheroids, while the β1 integrin-expressing MEF did not. Expression levels of the cell cycle markers Ki67, PCNA, and histone H3-pSer10 were similar between GD25β1 and GD25 spheroids. Apoptotic cells accumulated earlier in GD25 spheroids; however, cell death increased with spheroid volumes in both spheroid types. In both cell systems, the presence of β1 integrins resulted in higher levels of active myosin light chain and inactive myosin light chain phosphatase, and a more compact spheroid structure. In conclusion, our results reveal that regulation of 3D growth in spheroids and foci is dependent on the β1 subfamily of integrins, and suggest that myosin-based spheroid contraction in combination with cell death limits the growth of β1-expressing spheroids.     

Proteomic Analysis of Stromal and Epithelial Cell Communications in Human Endometrial Cancer Using a Unique 3D Co‐Culture Model

Epithelial and stromal communications are essential for normal uterine functions and their dysregulation contributes to the pathogenesis of many diseases including infertility, endometriosis, and cancer. Although many studies have highlighted the advantages of culturing cells in 3D compared to the conventional 2D culture system, one of the major limitations of these systems is the lack of incorporation of cells from non‐epithelial lineages. In an effort to develop a culture system incorporating both stromal and epithelial cells, 3D endometrial cancer spheroids are developed by co‐culturing endometrial stromal cells with cancerous epithelial cells. The spheroids developed by this method are phenotypically comparable to in vivo endometrial cancer tissue. Proteomic analysis of the co‐culture spheroids comparable to human endometrial tissue revealed 591 common proteins and canonical pathways that are closely related to endometrium biology. To determine the feasibility of using this model for drug screening, the efficacy of tamoxifen and everolimus is tested. In summary, a unique 3D model system of human endometrial cancer is developed that will serve as the foundation for the further development of 3D culture systems incorporating different cell types of the human uterus for deciphering the contributions of non‐epithelial cells present in cancer microenvironment.     

PDMS well platform for culturing millimeter‐size tumor spheroids

Multicellular tumor spheroids are widely used as in vitro models for testing of anticancer drugs. The advantage of this approach is that it can predict the outcome of a drug treatment on human cancer cells in their natural three‐dimensional environment without putting actual patients at risk. Several methods were utilized in the past to grow submillimeter‐size tumor spheroids. However, these small models are not very useful for preclinical studies of tumor ablation where the goal is the complete destruction of tumors that can reach several centimeters in diameter in the human body. Here, we propose a PDMS well method for large tumor spheroid culture. Our experiments with HepG2 hepatic cancer cells show that three‐dimensional aggregates of tumor cells with a volume as large as 44 mm³ can be grown in cylindrical PDMS wells after the initial culture of tumor cells by the hanging drop method. This is a 350 times more than the maximum volume of tumor spheroids formed inside hanging drops (0.125 mm³). © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1265–1269, 2013