Sequence of the exfoliative toxin B gene of Staphylococcus aureus.

We sequenced the Staphylococcus aureus exfoliative toxin B gene contained on a 1.7-kilobase HindIII fragment of plasmid pRW001. The gene was located by comparison of the amino acid sequences of open reading frames with the amino-terminal sequence of exfoliative toxin B and the total amino acid composition of the protein (A.D. Johnson, L. Spero, J.S. Cades, and B.T. De Cicco, Infect. Immun. 24:679-684, 1979). The primary translation product consists of 274 amino acids and contains a 31-amino-acid N-terminal peptide presumably necessary for transport.     

Isolation of extrachromosomal deoxyribonucleic acid for exfoliative toxin production from phage group II Staphylococcus aureus.

The ability of phage group II staphylococcal strain UT 0101 to produce exfoliative toxin and bacteriocin could be eliminated at a high frequency after growth at high temperatures or in the presence of ethidium bromide or sodium dodecyl sulfate. Extrachromosomal deoxyribonucleic acid, associated with the genes for exfoliative toxin and bacteriocin production, was isolated from strain UT 0101 but was absent from an ethidium bromide-cured substrain. The molecular weight of the exfoliative toxin plasmid, determined by co-sedimentation with the penicillinase plasmid, PI258, was 3.3 times 10-7. The 56S covalently closed circular form of the exfoliative toxin plasmid converted to a 38S open circular form after storage or exposure to sodium dodecyl sulfate. Plasmid deoxyribonucleic acid associated with penicillin resistance could not be identified in the penicillin-resistance Tox+ strains, UT 0007 and UT 0001.     

Cloning and Expression of cadD, a New Cadmium Resistance Gene of Staphylococcus aureus

A cadmium resistance gene, designated cadD, has been identified in and cloned from the Staphylococcus aureus plasmid pRW001. The gene is part of a two-component operon which contains the resistance gene cadD and an inactive regulatory gene, cadX*. A high degree of sequence similarity was observed between cadD and the cadB-like gene from S. lugdunensis, but no significant similarity was found with either cadA or cadB from the S. aureus plasmids pI258 and pII147. The positive regulatory gene cadX* is identical to cadX from pLUG10 over a stretch of 78 codons beginning at the N terminus, but it is truncated at this point and inactive. Sequence analysis showed that the cadmium resistance operon resides on a 3,972-bp element that is flanked by direct repeats of IS257. The expression of cadD in S. aureus and Bacillus subtilis resulted in low-level resistance to cadmium; in contrast, cadA and cadB from S. aureus induced higher level resistance. However, when the truncated version of cadX contained in pRW001 is complemented in trans with cadX from plasmid pLUG10, resistance increased approximately 10-fold suggesting that the cadmium resistance operons from pRW001 and pLUG10 are evolutionarily related. Moreover, the truncated version of cadX contained in pRW001 is nonfunctional and may have been generated by deletion during recombination to acquire the cadmium resistance element.     

Effect of Ethidium Bromide on Elimination of Exfoliative Toxin and Bacteriocin Production in Staphylococcus aureus

The scalded skin syndrome has been associated with phage group II staphylococci. The clinical manifestations of scalded skin syndrome, Ritter's disease, scarlatiniform erythema, and localized bullous impetigo, are due to the production of an extracellular protein, designated exfoliative toxin. Phage group II staphylococci can also produce an extracellular protein, bacteriocin, which is bacteriocidal for specific gram-positive microorganisms. Strain UT 0007 produces both bacteriocin and exfoliative toxin which appear to be products of extrachromosomal genes. These genes are jointly eliminated from strain UT 0007 after growth in either ethidium bromide or at high temperatures.     

Molecular cloning with bifunctional plasmid vectors in Bacillus subtilis. II. Transfer of sequences propagated in Escherichia coli to B. subtilis

Recombinant plasmid DNA cloned in E. coli via the bifunctional vector pDH5060 suffered deletions when returned to B. subtilis. However, DNA preparations of identical chimeras containing homologous or heterologous sequences stably transformed B. subtilis at high efficiency when isolated from B. subtilis. The vector pDH5060, however, was not affected and could be stably shuttled between E. coli and B. subtilis at high frequency. These problems affected the transfer of clone pools and individual chimeras, irrespective of the restriction or recombination phenotype of B. subtilis recipients. Deleted chimeras lost at least one end of cloned inserts, and in most cases, flanking plasmid sequences. Single plasmid forms (intact or deleted) were isolated from several hundred individual Cmr-transformants this suggests that events leading to deletion of chimeric plasmid DNA occur during transformation by restriction of unmodified insert sequences propagated in the intermediate host, E. coli. This conclusion is discussed with regard to the mechanism of plasmid transformation in B. subtilis.     

Sequence determination and comparison of the exfoliative toxin A and toxin B genes from Staphylococcus aureus.

The DNA encoding the exfoliative toxin A gene (eta) of Staphylococcus aureus was cloned into bacteriophage lambda gt11 and subsequently into plasmid pLI50 on a 1,391-base-pair DNA fragment of the chromosome. Exfoliative toxin A is expressed in the Escherichia coli genetic background, is similar in length to the toxin purified from culture medium, and is biologically active in an animal assay. The nucleotide sequence of the DNA fragment containing the gene was determined. The protein deduced from the nucleotide sequence is a polypeptide of 280 amino acids. The mature protein is 242 amino acids. The DNA sequence of the exfoliative toxin B gene was also determined. Corrections indicate that the amino acid sequence of exfoliative toxin B is in accord with chemical sequence data.     

Cloning, nucleotide sequence, and expression of the gene encoding the bacteriocin boticin B from Clostridium botulinum strain 213B

Boticin B is a heat-stable bacteriocin produced by Clostridium botulinum strain 213B that has inhibitory activity against various strains of C. botulinum and related clostridia. The gene encoding the bacteriocin was localized to a 3.0-kb HindIII fragment of an 18. 8-kb plasmid, cloned, and sequenced. DNA sequencing revealed the boticin B structural gene, btcB, to be an open reading frame encoding 50 amino acids. A C. botulinum strain 62A transconjugant containing the HindIII fragment inserted into a clostridial shuttle vector expressed boticin B, although at much lower levels than those observed in C. botulinum 213B. To our knowledge, this is the first demonstration and characterization of a bacteriocin from toxigenic group I C. botulinum.     

Analysis of the beta-lactamase plasmid of borderline methicillin-susceptible Staphylococcus aureus: focus on bla complex genes and cadmium resistance determinants cadD and cadX

Borderline methicillin-susceptible Staphylococcus aureus strains are a rather homogeneous group, characterized by MICs of penicillinase-resistant penicillins (PRPs) at or just below the susceptibility breakpoint. Other features unique to this group include the presence of a pBW15-like beta-lactamase plasmid, the association with phage complex 94/96, and the production of a PRP-hydrolyzing beta-lactamase activity in addition to the classical penicillinase activity. The four HindIII fragments of pBORa53, a pBW15-like plasmid from the well-studied borderline S. aureus strain a53, were cloned in Escherichia coli, sequenced and analyzed. The plasmid (17,334 bp in size) contains 14 open reading frames (ORFs) and a complete copy of transposon Tn552, which harbors the three genes of the bla complex (blaZ, blaR1, and blaI) necessary for penicillinase production. Among the other 11 ORFs identified, two were homologous to cadmium resistance determinants of Staphylococcus lugdunensis and to the cadD and cadX genes recently detected in S. aureus. Consistent with this, strain a53 was found to be cadmium resistant. From a collection of 30 S. aureus isolates with borderline PRP MIC levels, 27 matched strain a53 in the positive amplification reactions with all of the four primer pairs targeting the cadD-cadX region, the presence of the 17.3-kb plasmid, and the level of cadmium resistance. The well-established S. aureus laboratory strain ATCC 29213 was also found to express cadD-cadX-mediated cadmium resistance. pBORa53 could be re-isolated from transformants obtained by transferring it into a PRP-susceptible recipient. However, while the transformants demonstrated levels of cadmium and penicillin resistance similar to those of strain a53, they remained fully susceptible to PRPs.     

Expression and inducibility in Staphylococcus aureus of the mecA gene, which encodes a methicillin-resistant S. aureus-specific penicillin-binding protein.

A beta-lactam-sensitive strain of Staphylococcus aureus could be converted to methicillin resistance by the introduction of a plasmid carrying the 4.3-kilobase HindIII chromosomal DNA fragment which encoded the mecA gene from a methicillin-resistant S. aureus. Transformant cells produced methicillin-resistant S. aureus-specific penicillin-binding protein constitutively, and additional insertion of an inducible penicillinase plasmid caused production of the pencillin-binding protein to become inducible.     

Nature of the genetic determinant controlling exfoliative toxin production in Staphylococcus aureus

Phage group II Staphylococcus aureus has been identified as the etiological agent of the staphylococcal scaleded skin syndrome. The development of an animal model system permitted fulfillment of Koch's postulates and recognition of exfoliative toxin (ET) as being responsible for some of the clinical manifestations of this syndrome. Initial studies directed toward associating a lysogenic phage with the genetic control of ET synthesis failed to support this hypothesis. Growth of two Tox⁺ strains at 44 C was more effective than growth in ethidium bromide or sodium dodecyl sulfate in eliminating the ability to produce ET. The early and rapid accumulation of ET-negative (Tox⁻) variants during growth of strain UT 0007 at 44 C, the lack of any selective advantage of the Tox⁻ variants over Tox⁺ cells during growth at 44 C, and an enhanced elimination frequency at 44 C of 97.9% over the spontaneous frequency of loss strongly suggest that the gene for ET synthesis is extrachromosomal. Additional evidence suggests that this gene is located on a plasmid which is not associated with genes for penicillinase synthesis and cadmium resistance. Two Tox⁺ strains harbored lysogenic phage capable of transducing cadmium resistance, but not penicillin resistance, to specific Tox⁻ recipients.     

Aerobactin genes in clinical isolates of Escherichia coli.

The location of the aerobactin gene complex on either the chromosome or plasmid was determined in eight aerobactin-positive clinical isolates of Escherichia coli by Southern hybridization analysis, using as probes the cloned aerobactin genes from the ColV-K30 plasmid. The aerobactin genes were in two cases detected on large plasmids, whereas in the other strains the aerobactin genes are most likely located on the chromosome. Restriction mapping revealed only slight variations in the structural genes and an at least 3.4-kilobase-long upstream region conserved in all three plasmid-coded systems. A 7.7-kilobase HindIII fragment upstream and adjacent to the 16.3-kilobase HindIII fragment carrying the complete aerobactin system was cloned from the ColV-K30 plasmid. Fine-structure restriction mapping identified the left insertion sequence in the upstream region as IS1, in inverted orientation to the IS1 element downstream from the aerobactin operon. The upstream and downstream sequences of IS1 appear to have perfect homology, as indicated by S1 nuclease resistance of a 760-base-pair DNA duplex formed by both IS1 elements.     

The cloning of chromosomal DNA associated with methicillin and other resistances in Staphylococcus aureus

Competitive hybridization was used to detect the deletion of chromosomal DNA accompanying the loss of resistance to methicillin (and concomitantly, to cadmium, mercury and tetracycline) from a clinical strain of methicillin-resistant Staphylococcus aureus (MRSA). The method was also used to screen a partial plasmid library of chromosomal HindIII fragments from the MRSA strain. Eight recombinant plasmid clones were identified as containing DNA included in the deletion. These clones were used as probes to screen a phage library of the total DNA of the same MRSA strain, resulting in the isolation of overlapping recombinant phage clones carrying 24 kb of the deleted DNA. Two of the cloned HindIII fragments were associated closely with methicillin resistance, as shown by probing DNA from an independent methicillin-sensitive/resistant transduced strain pair and from two MRSA strains following growth in the presence of high concentrations of methicillin. The endonuclease map of the cloned DNA indicates the presence of four copies of a direct repeat less than 1 kb in size. The map is also consistent with the presence in the chromosome of sequences for mercury resistance (mer A mer B) and for tetracycline-resistance plasmid pT181.     

Nucleotide sequence of the thermostable direct hemolysin gene of Vibrio parahaemolyticus.

The gene encoding the thermostable direct hemolysin of Vibrio parahaemolyticus was characterized. This gene (designated tdh) was subcloned into pBR322 in Escherichia coli, and the functional tdh gene was localized to a 1.3-kilobase HindIII fragment. This fragment was sequenced, and the structural gene was found to encode a mature protein of 165 amino acid residues. The mature protein sequence was preceded by a putative signal peptide sequence of 24 amino acids. A putative tdh promoter, determined by its similarity to concensus sequences, was not functional in E. coli. However, a promoter that was functional in E. coli was shown to exist further upstream by use of a promoter probe plasmid. A 5.7-kilobase SalI fragment containing the structural gene and both potential promoters was cloned into a broad-host-range plasmid and mobilized into a Kanagawa phenomenon-negative V. parahaemolyticus strain. In contrast to E. coli, where the hemolysin was detected only in cell lysates, introduction of the cloned gene into V. parahaemolyticus resulted in the production of extracellular hemolysin.     

Isolation and molecular genetic characterization of the Bacillus subtilis gene (infB) encoding protein synthesis initiation factor 2.

Western blot (immunoblot) analysis of Bacillus subtilis cell extracts detected two proteins that cross-reacted with monospecific polyclonal antibody raised against Escherichia coli initiation factor 2 alpha (IF2 alpha). Subsequent Southern blot analysis of B. subtilis genomic DNA identified a 1.3-kilobase (kb) HindIII fragment which cross-hybridized with both E. coli and Bacillus stearothermophilus IF2 gene probes. This DNA was cloned from a size-selected B. subtilis plasmid library. The cloned HindIII fragment, which was shown by DNA sequence analysis to encode the N-terminal half of the B. subtilis IF2 protein and 0.2 kb of upstream flanking sequence, was utilized as a homologous probe to clone an overlapping 2.76-kb ClaI chromosomal fragment containing the entire IF2 structural gene. The HindIII fragment was also used as a probe to obtain overlapping clones from a lambda gt11 library which contained additional upstream and downstream flanking sequences. Sequence comparisons between the B. subtilis IF2 gene and the other bacterial homologs from E. coli, B. stearothermophilus, and Streptococcus faecium displayed extensive nucleic acid and protein sequence homologies. The B. subtilis infB gene encodes two proteins, IF2 alpha (78.6 kilodaltons) and IF2 beta (68.2 kilodaltons); both were expressed in B. subtilis and E. coli. These two proteins cross-reacted with antiserum to E. coli IF2 alpha and were able to complement in vivo an E. coli infB gene disruption. Four-factor recombination analysis positioned the infB gene at 145 degrees on the B. subtilis chromosome, between the polC and spcB loci. This location is distinct from those of the other major ribosomal protein and rRNA gene clusters of B. subtilis.     

Detection of Staphylococcus hyicus exfoliative toxin genes by dot blot hybridization and multiplex polymerase chain reaction

We designed a novel DNA probe and novel PCR primer sets for detecting the genes coding for Staphylococcus hyicus (S. hyicus) exfoliative toxin (ET). In dot blot hybridization, the novel DNA probe hybridized with chromosomal DNA of ExhA-, ExhB-, ExhC-, ExhD-, and SHETA-producing strains. This probe also hybridized with the plasmid DNA of a SHETB-producing strain. In Southern blot hybridization, the probe hybridized with a 1.5 kb HindIII fragment of chromosomal DNA from a SHETA-producing strain. The above fragment was cloned into E. coli and the nucleotide sequence of the SHETA gene determined, this gene proved to have almost the same homology (99.6%) as the ExhB gene. It was therefore thought that SHETA is a subtype of ExhB. In multiplex PCR using five primer sets, each gene gave a band distinguishable from the others. This multiplex PCR system has high specificity among the well-known S. hyicus ET genes. Of the 69 known ET-producing S. hyicus strains, 38, 19, 10, 2 and 1 strains have exhB, exhD exhA, shetb and exhC genes, respectively.     

Molecular cloning with bifunctional plasmid vectors in Bacillus subtilis

Summary Cloning in Escherichia coli and Bacillus subtilis was carried out using the bifunctional plasmid pDH5060. B. subtilis chromosomal DNA and pDH5060 DNA were digested with either BamHI or SalI, then annealed, ligated, and transformed into E. coli SK2267. Transformants containing sequences ligated into the BamHI or SalI sites in the Tc^r gene of pDH5060 were selected directly using a modification of the fusaric acid technique. The BamHI and SalI clone banks contain about 250 and 140 B. subtilis fragments, respectively, with an average insert size of 8–9 Kbp in the BamHI and 4–5 Kbp in the SalI bank. The inserts ranged in size from 0.3 Kbp to greater than 20 Kbp. The vector used here therefore accepts inserts which are significantly larger than previously reported for other B. subtilis cloning systems. All individual cloned B. subtilis sequences examined were stably propagated in E. coli SK2267. Eight of eighteen B. subtilis auxotrophic markers tested (aroG, gltA, glyB, ilvA, metC, purA, pyrD, and thrA) were transformed to prototrophy with BamHI or SalI clone bank DNA. All or part of the hybrid plasmid DNA recombined at the sites of homology in the chromosome of these Rec⁺ recipients. Loss of sequences from hybrid plasmids was not prevented in a r ^- m ^- recE4 recipient strain of B. subtilis. Although the recE4 background prevented recombination between homologous chromosomal DNA, a variety of cloned fragments were shown to be unstable and undergo deletions of both insert and plasmid sequences. In addition, B. subtilis sequences propagated in E. coli transformed B. subtilis recE4 recipients with a 500-1,000-fold reduced efficiency.     

hisT is part of a multigene operon in Escherichia coli K-12.

The Escherichia coli K-12 hisT gene has been cloned, and its organization and expression have been analyzed on multicopy plasmids. The hisT gene, which encodes tRNA pseudouridine synthase I (PSUI), was isolated on a Clarke-Carbon plasmid known to contain the purF gene. The presence of the hisT gene on this plasmid was suggested by its ability to restore both production of PSUI enzymatic activity and suppression of amber mutations in a hisT mutant strain. A 2.3-kilobase HindIII-ClaI restriction fragment containing the hisT gene was subcloned into plasmid pBR322, and the resulting plasmid (designated psi 300) was mapped with restriction enzymes. Complementation analysis with different kinds of hisT mutations and tRNA structural analysis confirmed that plasmid psi 300 contained the hisT structural gene. Enzyme assays showed that plasmid psi 300 overproduced PSUI activity by ca. 20-fold compared with the wild-type level. Subclones containing restriction fragments from plasmid psi 300 inserted downstream from the lac promoter established that the hisT gene is oriented from the HindIII site toward the ClaI site. Other subclones and derivatives of plasmid psi 300 containing insertion or deletion mutations were constructed and assayed for production of PSUI activity and production of proteins in minicells. These experiments showed that: (i) the proximal 1.3-kilobase HindIII-BssHII restriction fragment contains a promoter for the hisT gene and encodes a 45,000-dalton polypeptide that is not PSUI; (ii) the distal 1.0-kilobase BssHII-ClaI restriction fragment encodes the 31,000-dalton PSUI polypeptide; (iii) the 45,000-dalton polypeptide is synthesized in an approximately eightfold excess compared with PSUI; and (iv) synthesis of the two polypeptides is coupled, suggesting that the two genes are part of an operon. Insertion of mini-Mu d1 (lac Km) phage into plasmid psi 300 confirmed that the hisT gene is the downstream gene in the operon.     

Nucleotide sequence of a chromosomal mercury resistance determinant from a Bacillus sp. with broad-spectrum mercury resistance.

A 13.5-kilobase HindIII fragment, bearing an intact mercury resistance (mer) operon, was isolated from chromosomal DNA of broad-spectrum mercury-resistant Bacillus sp. strain RC607 by using as a probe a clone containing the mercury reductase (merA) gene. The new clone, pYW33, expressed broad-spectrum mercury resistance both in Escherichia coli and in Bacillus subtilis, but only in B. subtilis was the mercuric reductase activity inducible. Sequencing of a 1.8-kilobase mercury hypersensitivity-producing fragment revealed four open reading frames (ORFs). ORF1 may code for a regulatory protein (MerR). ORF2 and ORF4 were associated with cellular transport function and the hypersensitivity phenotype. DNA fragments encompassing the merA and the merB genes were sequenced. The predicted Bacillus sp. strain RC607 MerA (mercuric reductase) and MerB (organomercurial lyase) were similar to those predicted from Staphylococcus aureus plasmid pI258 (67 and 73% amino acid identities, respectively); however, only 40% of the amino acid residues of RC607 MerA were identical to those of the mercuric reductase from gram-negative bacteria. A 69-kilodalton polypeptide was isolated and identified as the merA gene product by examination of its amino-terminal sequence.     

Essential structure in the cloned transforming DNA that induces gene amplification of the Bacillus subtilis amyE-tmrB region.

Bacillus subtilis B7, a mutant which acquired gene amplification of the amyE-tmrB region, showed, as a result, hyperproductivity (about a 5- to 10-fold increase) of alpha-amylase and tunicamycin resistance. The mutational character was transferred to recipient cells by competence transformation. A 14-kilobase (kb) EcoRI chromosomal DNA fragment of strain B7 was found to have the transforming activity. We cloned a 6.4-kb EcoRI fragment on a phage vector lambda Charon 4A through a spontaneous deletion of 7.6 kb from the 14-kb fragment and subcloned a 1.6-kb HindIII fragment on pGR71. The cloned 6.4-kb EcoRI and 1.6-kb HindIII fragments retained the transforming activity of inducing gene amplification of the amyE-tmrB region. At the junction point (J) of the repeating units (16 kb), the tmrB gene was linked to a DNA region (M) located 4 kb upstream of amyE. The essential structure of the cloned, transforming (gene amplification-inducing) DNA was deduced to be that around J. The subcloned 1.6-kb HindIII fragment that retained the transforming activity was shown to be almost solely composed of the tmrB-J-M region. In addition, the DNA sequence around J was determined.