Biodegradation of cyanides, cyanates and thiocyanates to ammonia and carbon dioxide by immobilized cells of Pseudomonas putida

Pseudomonas putida utilizes cyanide as the sole source of carbon and nitrogen. Agar, alginate, and carrageenan were screened as the encapsulating matrices for P. putida. Alginate-immobilized cells of P. putida degraded sodium cyanide (NaCN) more efficiently than non-immobilized cells or cells immobilized in agar or carrageenan. The end products of biodegradation of cyanide were identified as ammonia (NH₃) and carbon dioxide (CO₂). These products changed the medium pH. In bioreactors, the rate of cyanide degradation increased with an increase in the rate of aeration. Maximum utilization of cyanide was observed at 200 ml min⁻¹ of aeration. Immobilized cells of P. putida degraded cyanides, cyanates and thiocyanates to NH₃ and CO₂. Use of Na[¹⁴C]-CN showed that 70% of carbon of Na[¹⁴C]-CN was converted into ¹⁴CO₂ and only 10% was associated with the cell biomass. The substrate-dependent kinetics indicated that the K _m and V _max values of P. putida for the substrate, NaCN were 14 mM and 29 nmol of oxygen consumed mg protein⁻¹ min⁻¹ respectively. Received 29 January 1996/ Accepted in revised form 19 September 1997     

Characterization of a marine-isolated mercury-resistant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> strain SP1 and its potential application in marine mercury reduction

The Pseudomonas putida strain SP1 was isolated from marine environment and was found to be resistant to 280 μM HgCl₂. SP1 was also highly resistant to other metals, including CdCl₂, CoCl₂, CrCl₃, CuCl₂, PbCl₂, and ZnSO₄, and the antibiotics ampicillin (Ap), kanamycin (Kn), chloramphenicol (Cm), and tetracycline (Tc). mer operon, possessed by most mercury-resistant bacteria, and other diverse types of resistant determinants were all located on the bacterial chromosome. Cold vapor atomic absorption spectrometry and a volatilization test indicated that the isolated P. putida SP1 was able to volatilize almost 100% of the total mercury it was exposed to and could potentially be used for bioremediation in marine environments. The optimal pH for the growth of P. putida SP1 in the presence of HgCl₂ and the removal of HgCl₂ by P. putida SP1 was between 8.0 and 9.0, whereas the optimal pH for the expression of merA, the mercuric reductase enzyme in mer operon that reduces reactive Hg²⁺ to volatile and relatively inert monoatomic Hg⁰ vapor, was around 5.0. LD₅₀ of P. putida SP1 to flounder and turbot was 1.5 × 10⁹ CFU. Biofilm developed by P. putida SP1 was 1- to 3-fold lower than biofilm developed by an aquatic pathogen Pseudomonas fluorescens TSS. The results of this study indicate that P. putida SP1 is a low virulence strain that can potentially be applied in the bioremediation of HgCl₂ contamination over a broad range of pH.     

Cryptic growth within a binary microbial culture

Summary The ability of viable cells of the species Pseudomonas putida and Hyphomicrobium sp. to metabolize the particulate and soluble cellular organic constituents of both species was studied in a series of batch experiments. Both P. putida and Hyphomicrobium sp. were grown in individual batch reactors on either the ¹⁴C-labelled soluble or the particulate debris of sonicated cells of each species derived from steady-state chemostat cultures. Cell generation times (t _g)observed for P. putida cultivated on soluble organic material originating from either sonicated P. putida or Hyphomicrobium sp. cells, were t _g= 2.0 h and t _g= 6.3 h, respectively. Corresponding t _gvalues of Hyphomicrobium sp. on soluble organic material originating from sonicated P. putida and Hyphomicrobium so. were, respectively, 11.6 h and 4.3 h. While particulate debris originating from either species was solubilized by both P. putida and Hyphomicrobium sp., no increases in cell numbers were observed for either species. The data indicate that bacteria are capable of scavenging soluble material released upon cell lysis at near maximal rates; solubilization of debris also occurred but at much slower overall rates with no observable cell replication. The results reaffirm that cryptic growth and turnover of cellular biomass can be significant under situations of low substrate flux or starvation conditions. Offprint requests to: J. D. Bryers     

Biotization of Arabidopsis thaliana with Pseudomonas putida and assessment of its positive effect on in vitro growth

Determination of the optimal inoculation method and concentration to use for plant-bacteria interaction studies is important in many cases, such as the phytoremediation of heavy metals and other toxic compounds in contaminated areas. The aim of this study was to compare different concentrations and times of inoculation of Pseudomonas putida with various growth stages of Arabidopsis thaliana in 14-d in vitro cultures. A significant beneficial impact of the bacterium was detected in the shoot length and root weight of seedlings. The highest shoot length and root fresh and dry weights were detected in 14-d and 2 × 10³ cfu mL⁻¹ inoculated samples. In addition, the increase in root weight could be visualized with crystal violet staining, as relatively more root hair and lateral root formation occurred in seedlings inoculated with moderate concentrations of bacteria, possibly due to the ability of P. putida to produce indole-acetic acid. Moreover, the highest photosynthetic pigment accumulation was obtained with the highest bacterial inoculum (2 × 10⁶ cfu mL⁻¹), which was tested in 0- or 3-d-old seedlings. Rhizospheric bacterial colonization was also visualized with GFP-labeled bacteria by confocal microscopy. These results showed that biotization of A. thaliana with P. putida KT2440 did not cause severe oxidative stress in seedlings, because H₂O₂ accumulation levels together with CAT and POX activities were not significantly induced. Therefore, this strain could be used for several applications based on plant-bacteria interactions.

     

Effect of High Temperature on <Emphasis Type="Italic">Pseudomonas putida</Emphasis> NBRI0987 Biofilm Formation and Expression of Stress Sigma Factor RpoS

Pseudomonas is an efficient plant growth–promoting rhizobacteria; however, among the limiting factors for its commercialization, tolerance for high temperature is the most critical one. After screening 2,500 Pseudomnas sp. strains, a high temperature tolerant–strain Pseudomonas putida NBRI0987 was isolated from the drought-exposed rhizosphere of chickpea (Cicer arietinum L. cv. Radhey), which was grown under rain-fed conditions. P. putida NBRI0987 tolerated a temperature of 40°C for ≤ 5 days. To the best of our knowledge, this is the first report of a Pseudomnas sp. demonstrating survival estimated by counting viable cells under such a high temperature. P. putida NBRI0987 colony-forming unit (CFU)/ml on day 10 in both the absence and presence of MgSO₄.7H₂O (MgSO₄) in combination with glycerol at 40°C were 0.0 and 1.7 × 10¹¹, respectively. MgSO₄ plus glycerol also enhanced the ability of P. putida NBRI0987 to tolerate high temperatures by inducing its ability to form biofilm. However, production of alginate was not critical for biofilm formation. The present study demonstrates overexpression of stress sigma factor σ ^S (RpoS) when P. putida NBRI0987 is grown under high-temperature stress at 40°C compared with 30°C. We present evidence, albeit indirect, that the adaptation of P. putida NBRI0987 to high temperatures is a complex multilevel regulatory process in which many different genes can be involved.     

Interesterification of butter fat by partially purified extracellular lipases from Pseudomonas putida,Aspergillus niger and Rhizopus oryzae

Three extracellular lipases were produced by batch fermentation of Pseudomonas putida ATCC 795, Aspergillus niger CBS 131.52 and Rhizopus oryzae ATCC 34612 during the late phase of growth, at 72, 96 and 96 h, respectively. The lipases were partially purified by (NH₄)₂SO₄ fractionation. The lipase of P. putida was optimal at pH 8.0 whereas those from A. niger and R. oryzae were optimal at pH 7.5. The A. niger lipase had the lowest V _max value (0.51×10^-3 U/min) and R. oryzae the highest (1.86×10^-3 U/min). The K _m values for P. putida, A. niger and R. oryzae lipases were 1.18, 0.97, and 0.98 mg/ml, respectively. Native PAGE of the partially-purified lipase extracts showed two to four major bands. The interesterification of butter fat by A. niger lipase decreased the water activity as well as the hydrolytic activity. The A. niger lipase had the highest interesterification yield value (26%) and the R. oryzae lipase the lowest (4%). In addition, A. niger lipase exhibited the highest decrease (17%) in long-chain hypercholesterolemic fatty acids (C12:0, C14:0 and C16:0) at the sn-2-position; the P. putida lipase demonstrated the least favourable changes in specificity at the same position.F. Pabai and S. Kermasha are with the Department of Food Science and Agricultural Chemistry, McGill University, 21111 Lakeshore, Ste Anne de Bellevue, Québec, H9X 3V9, Canada; A. Morin is with the Food Research and Development Centre, Agricultural and Agri-Food Canada, 3600 Casavant Blvd West, Saint-Hyacinthe, Québec, J2S 8E3, Canada.     

Anaerobic C–H Oxyfunctionalization: Coupling of Nitrate Reduction and Quinoline Hydroxylation in Recombinant Pseudomonas putida

Whole‐cell biocatalysis for C–H oxyfunctionalization depends on and is often limited by O₂ mass transfer. In contrast to oxygenases, molybdenum hydroxylases use water instead of O₂ as an oxygen donor and thus have the potential to relieve O₂ mass transfer limitations. Molybdenum hydroxylases may even allow anaerobic oxyfunctionalization when coupled to anaerobic respiration. To evaluate this option, the coupling of quinoline hydroxylation to denitrification is tested under anaerobic conditions employing Pseudomonas putida (P. putida) 86, capable of aerobic growth on quinoline. P. putida 86 reduces both nitrate and nitrite, but at low rates, which does not enable significant growth and quinoline hydroxylation. Introduction of the nitrate reductase from Pseudomonas aeruginosa enables considerable specific quinoline hydroxylation activity (6.9 U g_CDW^?1) under anaerobic conditions with nitrate as an electron acceptor and 2‐hydroxyquinoline as the sole product (further metabolization depends on O₂). Hydroxylation‐derived electrons are efficiently directed to nitrate, accounting for 38% of the respiratory activity. This study shows that molybdenum hydroxylase‐based whole‐cell biocatalysts enable completely anaerobic carbon oxyfunctionalization when coupled to alternative respiration schemes such as nitrate respiration.     

The effects of herbicides and mycoparasites at different moisture levels on carpogenic germination in Sclerotinia sclerotiorum

Colonization of plant roots by fluorescent pseudomonads has been correlated with disease suppression. One mechanism may involve altered defense responses in the plant upon colonization. Altered defense responses were observed in bean (Phaseolus vulgaris) inoculated with fluorescent pseudomonads. Systemic effects of root inoculation by Pseudomonas putida isolate Corvallis, P. tolaasii (P9A) and P. aureofaciens REW1-I-1 were observed in bean leaves from 14-day-old plants. SDS- polyacrylamide gel electrophoresis demonstrated that levels of certain acid-soluble proteins increased in the leaf extracts of inoculated plants. Plants inoculated with REW1-I-1 produced more of a 57 M_r protein, and plants inoculated with isolates P9A and REW1-I-1 produced more of a 38 M_r protein. Northern hybridization revealed enhanced accumulation of mRNAs, that encode the pathogenesis-related protein PR1a, in leaves of plants inoculated with P. putida and REW1-I-1. Only REW1-I-1, but not P9A or P. putida induced symptoms of an hypersensitive response on tobacco leaves, bean cotyledons, and in bean suspension cultures. Phenolics and phytoalexins accumulated in bean cotyledons exposed to REW1-I-1 for 24 h but little change in levels of these compounds occurred in cotyledons inoculated with P9A and P. putida. Both suspension culture cells and roots treated with REW1-I-1 rapidly evolved more hydrogen peroxide than those exposed to P9A and P. putida. However, roots from 14-day-old plants colonized by P9A, P. putida or REW1-I-1 did not have higher levels of phenolics, phytoalexins or mRNAs for two enzymes involved in phenolic biosynthesis, phenylalanine-ammonia lyase and chalcone synthase. A selective induction of plant defense strategies upon root colonization by certain pseudomonads is apparent.     

Differential Rhizosphere Establishment and Cyanide Production by Alginate-Formulated Weed-Deleterious Rhizobacteria

The effects of Pseudomonas putida ATH2-1RI/9 and Acidovorax delafieldii ATH2-2RS/1 on rhizosphere colonization, cyanide production, and growth of velvetleaf and corn was examined. When formulated in alginate beads and inoculated onto velvetleaf and corn plants (10⁹ CFU/plant), only P. putida ATH2-1RI/9 consistently reduced velvetleaf growth. Neither isolate inhibited corn growth. Interestingly the levels of P. putida ATH2-1RI/9 in the velvetleaf rhizosphere were 1000-fold higher (7 × 10⁷ CFU/g root) than the A. delafieldii ATH2-2RS/1 populations. Cyanide (53–68 mM/g root) was recovered from the P. putida ATH2-1RI/9-inoculated velvetleaf plants. In contrast both A. delafieldii ATH2-2RS/1 and P. putida ATH2-1RI/9 colonized the corn rhizosphere to the same extent (1–5 × 10⁷ CFU/g root), producing 1 mM and 14 mM/g root respectively. These results suggest that bacterial formulation methods can influence the effectiveness of deleterious rhizobacteria in reducing weed growth.     

The solvent efflux system of Pseudomonas putida S12 is not involved in antibiotic resistance

The active efflux system contributing to the solvent tolerance of Pseudomonas putida S12 was characterized physiologically. The mutant P. putida JK1, which lacks the active efflux system, was compared with the wild-type organism. None of 20 known substrates of common multi-drug-resistant pumps had a stronger growth-inhibiting effect on the mutant than on the wild type. The amount of [¹⁴C]toluene accumulating in P. putida S12 increased in the presence of the solvent xylene and in the presence of uncouplers. The effect of uncouplers confirms the proton dependency of the efflux system in P. putida S12. Other compounds, potential substrates for the solvent pump, did not affect the accumulation of [¹⁴C]toluene. These results show that the efflux system in P. putida S12 is specific for organic solvents and does not export antibiotics or other known substrates of multi-drug-resistant pumps. Received: 15 February 2000 / Received revision: 16 June 2000 / Accepted: 18 June 2000     

Expression and characterization of (<Emphasis Type="Italic">R</Emphasis>)-specific enoyl coenzyme A hydratases making a channeling route to polyhydroxyalkanoate biosynthesis in <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

We investigated the expression of (R)-specific enoyl coenzyme A hydratase (PhaJ) in Pseudomonas putida KT2440 accumulating polyhydroxyalkanoate (PHA) from sodium octanoate in order to identify biosynthesis pathways of PHAs from fatty acids in pseudomonads. From a database search through the P. putida KT2440 genome, an additional phaJ gene homologous to phaJ4 _Pa from Pseudomonas aeruginosa, termed phaJ4 _Pp, was identified. The gene products of phaJ1 _Pp, which was identified previously, and phaJ4 _Pp were confirmed to be functional in recombinant Escherichia coli on PHA synthesis from sodium dodecanoate. Cytosolic proteins from P. putida grown on sodium octanoate were subjected to anion exchange chromatography and one of the eluted fractions with hydratase activity included PhaJ4_Pp, as revealed by western blot analysis. These results strongly suggest that PhaJ4_Pp forms a channeling route from β-oxidation to PHA biosynthesis in P. putida. Moreover, the substrate specificity of PhaJ1_Pp was suggested to be different from that of PhaJ1_Pa from P. aeruginosa although these two proteins share 67% amino acid sequence identity.     

Electroporation of pKK1 silver-resistance plasmid fromPseudomonas stutzeri AG259 intoPseudomonas putida CYM318

Plasmid pKK1 (49.4 Mda), which encodes for Ag⁺ resistance, was isolated fromPseudomonas stutzeri AG259 (pKK1) and introduced intoPseudomonas putida CYM318 by high-voltage electroporation. Upon acquiring pKK1,P. putida CYM318 became resistant to AgNO₃. This demonstrated that electroporation is a useful method to introduce a nonconjugative metal-resistance plasmid into a bacterial strain and to conduct further comparative research on Ag accumulation.     

Degradation of tetradecyltrimethylammonium by Pseudomonas putida A ATCC 12633 restricted by accumulation of trimethylamine is alleviated by addition of Al 3+ ions

Aims: To establish if tetradecyltrimethylammonium (TDTMA) might be degraded by pure culture of Pseudomonas strains, and how the presence of a Lewis’ acid in the medium influences its biodegradability. Methods and Results: From different strains of Pseudomonas screened, only Pseudomonas putida A ATCC 12633 grows with 50 mg l^?1 of TDTMA as the sole carbon and nitrogen source. A monooxygenase activity catalyzed the initial step of the biodegradation. The trimethylamine (TMA) produced was used as nitrogen source or accumulated inside the cell. To decrease the intracellular TMA, the culture was divided, and 0·1 mmol l^?1 AlCl₃ added. In this way, the growth and TDTMA consumption increased. The internal concentration of TMA, determined using the fluorochrome Morin, decreased by the formation of Al³⁺ : TMA complex. Conclusions: Pseudomonas putida utilized TDTMA as its sole carbon and nitrogen source. The TMA produced in the initial step of the biodegradation by a monooxygenase activity was used as nitrogen source or accumulated inside the cell, affecting the bacterial growth. This effect was alleviated by the addition of AlCl₃. Significance and Impact of the Study: The use of Lewis’ acids to sequester intracellular amines offers an alternative to achieve an efficient utilization of TDTMA by Ps. putida.     

Isolation and characterization of ethylbenzene degrading <Emphasis Type="Italic">Pseudomonas putida</Emphasis> E41

Pseudomonas putida E41 was isolated from oil-contaminated soil and showed its ability to grow on ethyl-benzene as the sole carbon and energy source. Moreover, P. putida E41 show the activity of biodegradation of ethylbenzene in the batch culture. E41 showed high efficiency of biodegradation of ethylbenzene with the optimum conditions (a cell concentration of 0.1 g wet cell weight/L, pH 7.0, 25°C, and ethylbenzene concentration of 50 mg/L) from the results of the batch culture. The maximum degradation rate and specific growth rate (μ_max) under the optimum conditions were 0.19+0.03 mg/mg-DCW (Dry Cell Weight)/h and 0.87+0.13 h⁻¹, respectively. Benzene, toluene and ethylbenzene were degraded when these compounds were provided together; however, xylene isomers persisted during degradation by P. putida E41. When using a bioreactor batch system with a binary culture with P. putida BJ10, which was isolated previously in our lab, the degradation rate for benzene and toluene was improved in BTE mixed medium (each initial concentration: 50 mg/L). Almost all of the BTE was degraded within 4 h and 70–80% of m-, p-, and o-xylenes within 11 h in a BTEX mixture (initial concentration: 50 mg/L each). In summary, we found a valuable new strain of P. putida, determined the optimal degradation conditions for this isolate and tested a mixed culture of E41 and BJ10 for its ability to degrade a common sample of mixed contaminants containing benzene, toluene, and xylene.     

Biosynthesis of polyhydroxyalkanoate homopolymers by Pseudomonas putida

Pseudomonas putida KT2442 has been a well-studied producer of medium-chain-length (mcl) polyhydroxyalkanoate (PHA) copolymers containing C6 ~ C14 monomer units. A mutant was constructed from P. putida KT2442 by deleting its phaG gene encoding R-3-hydroxyacyl-ACP-CoA transacylase and several other β-oxidation related genes including fadB, fadA, fadB2x, and fadAx. This mutant termed P. putida KTHH03 synthesized mcl homopolymers including poly(3-hydroxyhexanoate) (PHHx) and poly(3-hydroxyheptanoate) (PHHp), together with a near homopolymer poly(3-hydroxyoctanoate-co-2 mol% 3-hydroxyhexanoate) (PHO*) in presence of hexanoate, heptanoate, and octanoate, respectively. When deleted with its mcl PHA synthase genes phaC1 and phaC2, the recombinant mutant termed P. putida KTHH08 harboring pZWJ4-31 containing PHA synthesis operon phaPCJ from Aeromonas hydrophila 4AK4 accumulated homopolymer poly(3-hydroxyvalerate) (PHV) when valerate was used as carbon source. The phaC deleted recombinant mutant termed P. putida KTHH06 harboring pBHH01 holding PHA synthase PhbC from Ralstonia eutropha produced homopolymers poly(3-hydroxybutyrate) (PHB) and poly(4-hydroxybutyrate) using γ-butyrolactone was added as precursor. All the homopolymers were physically characterized. Their weight average molecular weights ranged from 1.8 × 10⁵ to 1.6 × 10⁶, their thermal stability changed with side chain lengths. The derivatives of P. putida KT2442 have been developed into a platform for production of various PHA homopolymers.     

Properties of fructose-1,6-diphosphate phosphatase and fructose-1,6-diphosphate aldolase fromPseudomonas putida

The fructose-1,6-P₂ (FDP) phosphatase, (FDPase) and FDP aldolase fromPseudomonas putida were partially purified by a combination of (NH₄)₂SO₄ fractionation and DEAE-Sephadex column chromatography. Michaelis-Menten kinetics were observed with, respect to FDP in both FDPase and FDP aldolase. TheK _m for FDP at pH 8.0 was 1.2×10⁻⁵M for FDPase and 3.0×10⁻⁵M for FDP aldolase. The specific activities of these two enzymes (assayed under optimal conditions in cell-free extracts ofP. putida grown ond-fructose), as well as their kinetic properties, are consistent with the suggestion that during growth ond-fructose most, of the FDP generated is converted to fructose-6-P (F-6-P), which is subsequently utilized via the Entner-Doudoroff pathway (EDP).     

Gas-phase degradation of VOCs using supported bacteria biofilms

Herein we report the use of Pseudomonas putida F1 biofilms grown on carbonized cellulosic fibers to achieve biodegradation of airborne volatile organic compounds (VOCs) in the absence of any bulk aqueous-phase media. It is believed that direct exposure of gaseous VOC substrates to biomass may eliminate aqueous-phase mass transfer resistance and facilitate VOC capture and degradation. When tested with toluene vapor as a model VOC, the supported biofilm could grow optimally at 300 p.p.m. toluene and 80% relative humidity, with a specific growth rate of 0.425 day⁻¹. During long-term VOC biodegradation tests in a tubular packed bed reactor, biofilms achieved a toluene degradation rate of 2.5 mg g_DCW⁻¹ h⁻¹ during the initial growth phase. Interestingly, the P. putida F1 film kept biodegrading activity even at the stationary nongrowth phase. The supported biofilms with a biomass loading of 20% (wt) could degrade toluene at a rate of 1.9 mg g_DCW⁻¹ h⁻¹ during the stationary phase, releasing CO₂ at a rate of 6.4 mg g_DCW⁻¹ h⁻¹ at the same time (indicating 100% conversion of substrate carbon to CO₂). All of these observations promised a new type of “dry” biofilm reactors for efficient degradation of toxic VOCs without involving a large amount of water.     

The mechanism of action of hexahydro-1,3,5-triethyl-s-triazine

Summary The mechanism of antimicrobial action of hexahydro-1,3,5-triethyl-s-triazine (HHTT) was studied using the HHTT-resistant isolate,Pseudomonas putida 3-T-15², its HHTT-sensitive, novobiocin-cured derivative,P. putida 3-T-15² 11:21,P. putida ATCC 12633,Pseudomonas aeruginosa PA01 andEscherichia coli J53 (RP4). HHTT was oxidized byP. putida 3-T-15², while respiration ofP. putida 3-T-15² 11:21 was inhibited by HHTT. Chemical assays showed that HHTT released formaldehyde.P. putida 3-T-15² was highly resistant to formaldehyde, whileP. putida 3-T-15² 11:21 was highly sensitive to formaldehyde. Both HHTT and formaldehyde acted similarly to inhibit proline uptake in bacterial cells and to inhibit the synthesis of the inducible enzymes, -galactosidase and glucose-6-phosphate dehydrogenase. HHTT did not have uncoupler-like activity.P. putida 3-T-15² used either HHTT or ethylamine, a component of HHTT, as a nitrogen source for growth, but neither HHTT, ethylamine or formaldehyde served as a carbon and energy source for growth. We concluded that a major mechanism of antimicrobial action of HHTT was through its degradation product, formaldehyde.     

Toluene biodegradation by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> F1: targeting culture stability in long-term operation

The stability of Pseudomonas putida F1, a strain harbouring the genes responsible for toluene degradation in the chromosome was evaluated in a bioscrubber under high toluene loadings and nitrogen limiting conditions at two dilution rates (0.11 and 0.27 h⁻¹). Each experiment was run for 30 days, period long enough for microbial instability to occur considering previously reported studies carried out with bacterial strains encoding the catabolic genes in the TOL plasmid. At all tested conditions, P. putida F1 exhibited stable performance as shown by the constant values of the specific toluene degradation yield, CO₂ produced versus toluene degraded yield, and biomass concentration within each steady state. Benzyl alcohol, a curing agent causing TOL plasmid deletion in Pseudomonas strains, was present in the cultivation medium as a result of the monooxygenation of toluene by the diooxygenase system of P. putida F1. However, no mutant population growing at the expense of the extracellular excreted carbon or lysis products was established in the chemostat as confirmed by the constant dissolved total organic carbon (TOC) concentration and fraction of toluene degrading cells (approx. 100%). In addition, batch experiments conducted with both lysis substrate and toluene simultaneously confirmed that P. putida F1 preferentially consumed toluene rather than extracellular excreted carbon.     

Isolation and Characterization of a Pseudomonas putida Strain able to Grow with Trimethyl-1,2-dihydroxy-propyl-ammonium as Sole Source of Carbon, Energy and Nitrogen

Trimethyl-1,2-dihydroxypropyl-ammonium (TM) originates from the hydrolysis of the parent esterquat surfactant, which is widely used as softener in fabric care. Based on test procedures mimicking complex biological systems, TM is supposed to degrade completely when reaching the environment. However, no organisms able to degrade TM were isolated nor has the degradation pathway been elucidated so far. We isolated a Gram-negative rod able to grow with TM as sole source of carbon, energy and nitrogen. The strain reached a maximum specific growth rate of 0.4 h^–1 when growing with TM as the sole source of carbon, energy and nitrogen. TM was degraded to completion and surplus nitrogen was excreted as ammonium into the growth medium. A high percentage of the carbon in TM (68% in continuous culture and 60% in batch culture) was combusted to CO₂ resulting in a low yield of 0.54 mg cell dry weight per mg carbon during continuous cultivation and 0.73 mg cell dry weight per mg carbon in batch cultures. Choline, a natural structurally related compound, served as a growth substrate, whereas a couple of similar other quaternary aminoalcohols also used in softeners did not. The isolated bacterium was identified by 16S-rDNA sequencing as a strain of Pseudomonas putida with a difference of only one base pair to P. putida DSM 291^T. Despite their high identity, the reference strain P. putida DSM 291^T was not able to grow with TM and the two strains differed even in shape when growing on the same medium. This is the first microbial isolate able to degrade a quaternary ammonium softener head group to completion. Previously described strains growing on quaternary ammonium surfactants (decyltrimethylammonium, hexadecyltrimethylammonium and didecyldimethylammonium) either excreted metabolites or a consortium of bacteria was required for complete degradation.