Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

Direct electrochemistry of cytochrome c at ordered macroporous active carbon electrode

Three-dimensionally (3D) ordered macroporous active carbon has been fabricated and used as electrode substrate for the direct electrochemistry of horse heart cytochrome c (Cyt c). The Cyt c immobilized on the surface of the ordered macroporous active carbon shows a pair of well-defined and nearly reversible redox waves at the formal potential of −0.033 V in pH 6.8 phosphate buffer solution. The interaction between Cyt c and the 3D macroporous active carbon makes the formal potential shift negatively compared to that of Cyt c in solution. Spectrophotometric and electrochemical methods have been used to investigate the interaction between Cyt c and the porous active carbon. The immobilized Cyt c maintains its biological activity, and shows a surface controlled electrode process with the electron-transfer rate constant (k_s) of 17.6 s⁻¹ and the charge-transfer coefficient (a) of 0.52, and displays the features of a peroxidase in the electrocatalytic reduction of hydrogen peroxide (H₂O₂). A potential application of the Cyt c-immobilized porous carbon electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2.0 × 10⁻⁵ to 2.4 × 10⁻⁴ mol l⁻¹. The detection limit (3σ) for determination of H₂O₂ has been found to be 1.46 × 10⁻⁵ mol l⁻¹.     

SEC of mono-carboxymethyl cellulose (CMC) in a wide range of pH; Mark–Houwink constants

A method for determination of carboxymethyl cellulose (CMC) molecular weight (M_W) and chemical heterogeneity (degree of oxidation (DO)) using a bi-detector HPSEC (UV-detector online with refractometer) has been developed. It has been found that the use of 0.5 N NaOH or 0.4 M acetate buffer as the eluent ensures CMC separation according to M_W. It has been revealed that the universal calibration for the polyelectrolyte CMC and the neutral polymer dextran is valid under the conditions applied. The Mark–Houwink equations for CMC in 0.5 N NaOH and 0.4 M acetate buffer have been estimated to be [η]=5.37×10⁻⁴ M_W^0.73 and [η] =2.24×10⁻⁴ M_W^0.83 dl g⁻¹, respectively. The equation log K=1.64−4.00 ml g⁻¹ for CMC has been estimated. An approach for determining DO from adsorption at 290 or 313 nm has been developed.     

Kinetics and mechanism of the stoichiometric oxygenation of [Cu(fla)(idpa)]ClO4 [fla=flavonolate, IDPA=3,3′-imino-bis(N,N-dimethylpropylamine)] and the [Cu(fla)(idpa)]ClO4-catalysed oxygenation of flavonol

Oxygenation of [Cu^II(fla)(idpa)]ClO₄ (fla=flavonolate; IDPA=3,3′-iminobis(N,N-dimethylpropylamine)) in dimethylformamide gives [Cu^II(idpa)(O-bs)]ClO₄ (O-bs=O-benzoylsalicylate) and CO. The oxygenolysis of [Cu^II(fla)(idpa)]ClO₄ in DMF was followed by electronic spectroscopy and the rate law −d[{Cu^II(fla)(idpa)}ClO₄]/dt=k_obs[{Cu^II(fla)(idpa)}ClO₄][O₂] was obtained. The rate constant, activation enthalpy and entropy at 373 K are k_obs=6.13±0.16×10⁻³ M⁻¹ s⁻¹, ΔH^‡=64±5 kJ mol⁻¹, ΔS^‡=−120±13 J mol⁻¹ K⁻¹, respectively. The reaction fits a Hammett linear free energy relationship and a higher electron density on copper gives faster oxygenation rates. The complex [Cu^II(fla)(idpa)]ClO₄ has also been found to be a selective catalyst for the oxygenation of flavonol to the corresponding O-benzoylsalicylic acid and CO. The kinetics of the oxygenolysis in DMF was followed by electronic spectroscopy and the following rate law was obtained: −d[flaH]/dt=k_obs[{Cu^II(fla)(idpa)}ClO₄][O₂]. The rate constant, activation enthalpy and entropy at 403 K are k_obs=4.22±0.15×10⁻² M⁻¹ s⁻¹, ΔH^‡=71±6 kJ mol⁻¹, ΔS^‡=−97±15 J mol⁻¹ K⁻¹, respectively.     

Epinephrine quantification in pharmaceutical formulations utilizing plant tissue biosensors

A plant tissue biosensor associated with flow injection analysis is proposed to determine epinephrine in pharmaceutical samples. The polyphenol oxidase enzymes present in the fibers of a palm tree fruits (Livistona chinensis), catalyses the oxidation of epinephrine to epinephrinequinone as a primary product. This product is then electrochemically reduced (at −0.10 V versus Ag/AgCl_sat) on the biosensor surface and the resulting current is used for the quantification of epinephrine. The biosensor provides a linear response for epinephrine in the concentration range from 5.0 × 10⁻⁵ to 3.5 × 10⁻⁴ mol l⁻¹. The limit of detection estimated for this interval was 1.5 × 10⁻⁵ mol l⁻¹ and the correlation coefficient of 0.998, working under a flow rate of 2.0 ml min⁻¹ and using a sample loop of 100 μl. The repeatability (R.S.D. for 10 consecutive determinations of a 3.0 × 10⁻⁴ mol l⁻¹ epinephrine solution) was 3.1%. The results obtained by the method here proposed were compared with the official UV spectrophotometric procedure and also using a plant tissue reactor. The responses obtained with the proposed strategies were in good agreement with both ways of analyses, whereas the values obtained by the official spectrophotometric method was strongly affected by benzoic acid, present in the formulation of pharmaceutical product utilized for inhalation. Such favorable results obtained with the carbon paste biosensor or utilizing the bioreactor, joined with the simplicity of its preparation turns these procedures very attractive for epinephrine quantification in pharmaceutical products.     

Synthesis of graft copolymer (k-carrageenan-g-N,N-dimethylacrylamide) and studies of metal ion uptake, swelling capacity and flocculation properties

Graft copolymer of k-carrageenan and N,N-dimethylacrylamide has been synthesized by free radical polymerization using peroxymonosulphate/glycolic acid redox pair in an inert atmosphere. The grafting parameters i.e. grafting ratio, add on and efficiency decrease with increase in concentration of k-carrageenan from 0.6 to 1.4 g dm⁻³ and hydrogen ion from 3 × 10⁻³ to 7 × 10⁻³ mol dm⁻³, but these grafting parameters increase with increase in concentration of N,N-dimethylacrylamide from 16 × 10⁻² to 32 × 10⁻² mol dm⁻³, and peroxymonosulphate from 0.8 × 10⁻² to 2.4 × 10⁻² mol dm⁻³. The metal ion sorption, swelling behaviour and flocculation properties have been studied. The intrinsic viscosity of pure and grafted samples has been measured by using Ubbelohde capillary viscometer. Flocculation capability of k-carrageenan and k-carrageenan-g-N,N-dimethylacrylamide for both coking and non-coking coals has been studied for the treatment of coal mine waste water. The graft copolymer has been characterized by Infrared (IR) spectroscopy and thermogravimetric analysis.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.     

Nitric oxide stimulates prostaglandin synthesis in cultured rabbit gastric cells

Both prostaglandins (PGs) and nitric oxide (NO) have cytoprotective and hyperemic effects in the stomach. However, the effect of NO on PG synthesis in gastric mucosal cells is unclear. We examined whether sodium nitroprusside (SNP), a releaser of NO, stimulates PG synthesis in cultured rabbit gastric mucus-producing cells. These cells did not release NO themselves. Co-incubation with SNP (2 × 10⁻⁴, 5 × 10⁻⁴, 10⁻³ M) increased PGE₂ synthesis, and SNP (10⁻³ M) increased PGI₂ synthesis in these cells. Hemoglobin, a scavenger of NO, (10⁻⁵ M) eliminated the increase in PGE₂ synthesis by SNP, but methylene blue, an inhibitor of soluble guanylate cyclase, (5 × 10⁻⁵ M) did not affect the increase in PGE₂ synthesis by SNP. 8-bromo guanosine 3′ : 5′-cyclic monophosphate (8-bromo cGMP), a cGMP analogue, (10⁻⁶, 10⁻⁵, 10⁻⁴, 10⁻³ M) did not affect PGE₂ synthesis. These findings suggest that NO increased PGE₂ and PGI₂ synthesis via a cGMP-independent pathway in cultured rabbit gastric cells.     

Binding of genistein to human serum albumin demonstrated using tryptophan fluorescence quenching

Genistein is an isoflavone and phytoestrogen that is a potent inhibitor of cell proliferation and angiogenesis. This study was designed to investigate the binding of genistein to human serum albumin (HSA) under physiological conditions with drug concentrations in the range of 6.7 × 10⁻⁶ to 2.0 × 10⁻⁵ mol L⁻¹ and HSA concentration at 1.5 × 10⁻⁶ mol L⁻¹. Fluorescence quenching methods in combination with Fourier transform infrared (FT-IR) spectroscopy and circular dichroism (CD) spectroscopy was used to determine the binding mode, the binding constant and the protein structure changes in the presence of genistein in aqueous solution. Changes in the CD spectra and FT-IR spectra were observed upon ligand binding, and the degree of tryptophan fluorescence quenching change did significantly in the complexes. These data have proved the change in protein secondary structure accompanying ligand binding. The change in tryptophan fluorescence intensity was used to determine the binding constants. The thermodynamic parameters, the enthalpy change (ΔH) and the entropy change (ΔS) were calculated to be −22.24 kJ mol⁻¹and 19.60 J mol⁻¹ K⁻¹ according to the van’t Hoff equation, which indicated that hydrophobic and electrostatic interactions play the main role in the binding of genistein to HSA.     

Development and characterization in vitro of a catalase-based biosensor for hydrogen peroxide monitoring

There is increasing evidence that hydrogen peroxide (H₂O₂) may act as a neuromodulator in the brain, as well as contributing to neurodegeneration in diseased states, such as Parkinson's disease. The ability to monitor changes in endogenous H₂O₂ in vivo with high temporal resolution is essential in order to further elucidate the roles of H₂O₂ in the central nervous system. Here, we describe the in vitro characterization of an implantable catalase-based H₂O₂ biosensor. The biosensor comprises two amperometric electrodes, one with catalase immobilized on the surface and one without enzyme (blank). The analytical signal is then the difference between the two electrodes. The H₂O₂ sensitivity of various designs was compared, and ranged from 0 to 56 ± 4 mA cm⁻² M⁻¹. The most successful design incorporated a Nafion^® layer followed by a poly-o-phenylenediamine (PPD) polymer layer. Catalase was adsorbed onto the PPD layer and then cross-linked with glutaraldehyde. The ability of the biosensors to exclude interference from ascorbic acid, and other interference species found in vivo, was also tested. A variety of the catalase-based biosensor designs described here show promise for in vivo monitoring of endogenous H₂O₂ in the brain.     

Effects of interactions with micellar interfaces on the activity and structure of different lipolytic isoenzymes from Candida rugosa

The conformational and functional changes of cholesterol esterase (CE) and isolipase (CRL) from Candida rugosa after exposure to a micellar interface and subsequent extraction to a fresh buffer were studied. These two enzymes were activated by interaction with the micellar interface of a sulphosuccinic acid bis[2-ethylhexyl] ester/n-heptane/water system. For the hydrolysis of p-nitrophenyl butyrate ester in water, the catalytic efficiencies of CE and CRL were both improved because on activation their k_cat values increased from 378 to 465 and from 250 to 680 s⁻¹, respectively, while their K_m values decreased from 5.08 × 10⁻⁵ to 3.23 × 10⁻⁵ and from 2.28 × 10⁻⁴ to 1.14 × 10⁻⁴ M, respectively. After exposure to the micelles, CE showed a marked increase in its -helical content from 28 to 49%, but only limited changes were detected when CRL was exposed. These proteins exhibit similar capacities for increasing their -helical content in a helicogenic medium. In acetonitrile/water mixtures, CRL exhibits a partial decrease in the extent of its secondary structure, while CE exhibits an increase in its -helical content. The fact that this medium of reduced polarity permits one to simulate the effect of the AOT reverse micelles on the conformation of CE (increased helicity) but not their effect on the structure of CRL (decreased helicity) supports the hypothesis that only CE interacts to a significant extent with the apolar side of the micellar interface. After exposure to micelles of octyl-β-glucopyranoside, CE (but not CRL) showed a 10% increase in its -helical content.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Electrochemical quartz crystal impedance study on the overoxidation of polypyrrole-carbon nanotubes composite film for amperometric detection of dopamine

The electrochemical quartz crystal impedance (EQCI) method was used to study the overoxidation of polypyrrole (PPy)–multiwalled carbon nanotubes (MWCNT) nanocomposite film in neutral and alkaline solutions. The values of molar mass per electron transferred (M/n) obtained during the overoxidation of PPy in 0.10 mol L⁻¹ Na₂SO₄ and 0.20 mol L⁻¹ NaOH aqueous solutions were estimated to be ca. 17 and 22 g mol⁻¹, respectively, suggesting the nucleophilic attack of solution OH⁻ to the pyrrole units during the overoxidation, and the possible partial formation of carboxylic groups after the overoxidation in the NaOH solution. Also, the overoxidized PPy–MWCNT composite film prepared in the NaOH solution showed a notably larger affinity to dopamine (DA) dissolved in a neutral phosphate buffer than that prepared in the Na₂SO₄ solution. The modification of the overoxidized nanocomposite film improved substantially the sensitivity for DA assay in a neutral phosphate buffer, as compared with the modification of overoxidized PPy or MWCNT alone. At a −6 kHz (201-nm thickness) nanocomposite film prepared in a polymerization bath containing 1.0 mg mL⁻¹ MWCNT and overoxidized in 0.20 mol L⁻¹ aqueous NaOH, the peak current response from differential pulse voltammetric assay of DA was linear with DA concentration from 4.0 × 10⁻⁸ to 1.4 × 10⁻⁶ mol L⁻¹, with a lower limit of detection of 1.7 nmol L⁻¹, good anti-interferent ability, as well as good stability and reproducibility.     

A performance comparison of choline biosensors: anodic or cathodic detections of H2O2 generated by enzyme immobilized on a conducting polymer

Amperometric choline biosensors were fabricated by the covalent immobilization of an enzyme of choline oxidase (ChO) and a bi-enzyme of ChO/horseradish peroxidase (ChO/HRP) onto poly-5,2′:5′,2″-terthiophene-3′-carboxylic acid (poly-TTCA) modified electrodes (CPMEs). A sensor modified with ChO utilized the oxidation process of enzymatically generated H₂O₂ in a choline solution at +0.6 V. The other one modified with ChO/HRP utilized the reduction process of H₂O₂ in a choline solution at −0.2 V. Experimental parameters affecting the sensitivity of sensors, such as pH, applied potential, and temperature were optimized. A performance comparison of two sensors showed that one based on ChO/HRP/CPME had a linear range from 1.0×10⁻⁶ to 8.0×10⁻⁵ M and the other based on ChO/CPME from 1.0×10⁻⁶ to 5.0×10⁻⁵ M. The detection limits for choline employing ChO/HRP/CPME and ChO/CPME were determined to be about 1.0×10⁻⁷ and 4.0×10⁻⁷ M, respectively. The response time of sensors was less than 5 s. Sensors showed good selectivity to interfering species. The long-term storage stability of the sensor based on ChO/HRP/CPME was longer than that based on ChO/CPME.     

Specific interactions of steroids, arylhydrocarbons and flavonoids with progesterone receptors from the cytosol of the fungus Rhizopus nigricans

Rhizopus nigricans (R. nigricans) transforms fungitoxic progesterone into the less toxic 11-hydroxyprogesterone which is then able to exit the mycelia into the surrounding water. Hydroxylation of progesterone is an inducible process in which cytosolic progesterone receptors could be involved. In the present study, we characterised receptors with respect to ligand specificity and to their involvement in progesterone induction of hydroxylase. EC₅₀ values of different ligands (steroids, xenobiotic arylhydrocarbons and natural flavonoids) were determined by competition studies using 40 nM (³H)progesterone. C21 and C19 3-oxo-4-ene steroids were good competitors (EC₅₀ of progesterone 2.3 ± 0.1 × 10⁻⁷ M, EC₅₀ of androsten-3,17-dione 24 ± 2 × 10⁻⁷ M). The presence of hydroxyl groups in steroids significantly decreased the affinity for receptors. The arylhydrocarbons -naphthoflavone and ketoconazole exhibited EC₅₀ values of 0.3 ± 0.01 × 10⁻⁷ M and 27 ± 5 × 10⁻⁷ M, respectively, whereas β-naphthoflavone and benzo(a)pyrene were not able to displace labelled progesterone completely. The competition curves obtained by natural flavonoids also did not reach the bottom level of non-labelled progesterone, indicating the interaction at some allosteric binding site(s) of progesterone receptors. All ligands were examined for their involvement in progesterone-hydroxylase induction. Steroid agonists induced the enzyme in a dose-dependent manner in accordance with their affinity for receptors, whereas arylhydrocarbons and natural flavonoids did not induce the enzyme. The agonistic action of steroids, together with the antagonistic action of -naphthoflavone, strongly suggests the involvement of progesterone receptors in progesterone signalling resulting in the induction of progesterone-hydroxylase.     

Effect of carbenoxolone sodium on steroid-induced sodium transport in the toad bladder: Further studies

The licorice derivative, carbenoxolone sodium, is a potent inhibitor of the enzyme 11β-hydroxysteroid dehydrogenase. When this enzyme is suppressed or is absent, endogenous glucocorticoids induce mineralocorticoid-like sodium retention by the kidney. Carbenoxolone sodium administered in vivo to an adrenalectomized rat has also recently been shown to enhance the mineralocorticoid response to submaximal concentrations of aldosterone, deoxycorticosterone (DOC) and 11-dehydrocorticosterone (compound A). In the present studies conducted on the urinary bladder isolated from the Dominican toad, Bufo marinus, a concentration of carbenoxolone sodium shown previously to increase glucocorticoid-induced sodium transport (2.5 × 10⁻⁵ M) did not appear to alter the response to submaximal concentrations of aldosterone 10⁻⁸ M, DOC 10⁻⁷ M, or compound A 10⁻⁵ M. These findings are consistent with the view that in the whole animal carbenoxolone sodium may modify additional steroid metabolic pathways and/or physiological processes in several organs to produce the enhanced renal response to mineralocorticoids and compound A.     

Entrapment of lipase into K-carrageenan beads and its use in hydrolysis of olive oil in biphasic system

The porcine pancrease lipase was immobilized by entrapment in the beads of K-carrageenan and cured by treatment with polyethyleneimine (PEI) in the phosphate buffer. The retention of hydrolytic activity of lipase and compressive strength of the beads were examined. The activity of free and immobilized lipase was assessed by using olive oil as the substrate. The immobilized enzyme exhibited a little shift towards acidic pH for its optimal activity and retained 50% of its activity after 5 cycles. When the enzyme concentration was kept constant and substrate concentration was varied the K_m and V_max were observed to be 0.18 × 10⁻² and 0.10, and 0.10 × 10⁻² and 0.09 respectively, for free and for entrapped enzymes. When the substrate concentration was kept constant and enzyme concentration was varied, the values of K_m and V_max were observed to be 0.19 × 10⁻⁷ and 0.41, and 0.18 × 10⁻⁷ and 0.41 for free and entrapped enzymes. Though this indicates that there is no conformational change during immobilization, it also shows that the reaction velocity depends on the concentration. Immobilized enzyme showed improved thermal and storage stability. Hydrolysis of olive oil in organic–aqueous two-phase system using fixed bed reactor was carried out and conditions were optimized. The enzyme in reactor retained 30% of its initial activity after 480 min (12 cycles).     

Structure of Co2(CO)6(dppm) and Co2(CO)5(CHCO2Et)(dppm) (dppm = Ph2PCH2PPh2) and exchange reaction with CO: An experimental and computational study

Crystal structures of Co₂(CO)₆(dppm) (1) and Co₂(CO)₅(CHCO₂Et)(dppm) (2) (dppm = Ph₂PCH₂PPh₂) show asymmetry with respect to the orientation of the phenyl groups in 1 and owing to the bridging ethoxycarbonylcarbene ligand in 2. The effect of this asymmetry was recognized in the solid-state ³¹P NMR spectra of 1 and 2 and in the solid-state and solution ¹³C NMR spectra of 2 as well, but not in the solid-state and solution ¹³C NMR spectra of 1. In CH₂Cl₂ solution under an atmosphere of ¹³CO, the CO ligands of both complexes exchange with ¹³CO. The overall rate of ¹³CO exchange at 10 °C was found to be k_obs = 0.107 × 10⁻³ s⁻¹ for 1 and k_obs = 0.243 × 10⁻³ s⁻¹ for 2. Two-layered ONIOM(B3LYP/6-31G(d):LSDA/LANL2MB) studies revealed fluxional behavior of 1 with rather small barriers of activation of the rearrangements. Four possible isomers have been computed for 2, close to each other energetically.     

Radical-scavenging activity of butylated hydroxytoluene (BHT) and its metabolites

To clarify the radical-scavenging activity of butylated hydroxytoluene (BHT), a food additive, stoichiometric factors (n) and inhibition rate constants (k_inh) were determined for 2,6-di-tert-butyl-4-methylphenol (BHT) and its metabolites 2,6-di-tert-butyl-p-benzoquinone (BHT-Q), 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHA-CHO) and 3,5-di-tert-butyl-4-hydroperoxy-4-methyl-2,5-cyclohexadiene-1-one (BHT-OOH). Values of n and k_inh were determined from differential scanning calorimetry (DSC) monitoring of the polymerization of methyl methacrylate (MMA) initiated by 2,2′-azobis(isobutyronitrile) (AIBN) or benzoyl peroxide (BPO) at 70 °C in the presence or absence of antioxidants (BHT-related compounds). The n values declined in the order BHT (1–2) > BHT-CHO, BHT-OOH (0.1–0.3) > BHT-Q (0). The n value for BHT with AIBN was approximately 1.0, suggesting dimerization of BHT. The k_inh values declined in the order BHT-Q ((3.5–4.6)×10⁴ M⁻¹ s⁻¹) > BHT-OOH (0.7–1.9×10⁴ M⁻¹ s⁻¹) > BHT-CHO ((0.4–1.7)×10⁴ M⁻¹ s⁻¹) > BHT ((0.1–0.2)×10⁴ M⁻¹ s⁻¹). The k_inh for metabolites was greater than that for the parent BHT. Growing MMA radicals initiated by BPO were suppressed much more efficiently by BHT or BHT-Q compared with those initiated by AIBN. BHT was effective as a chain-breaking antioxidant.     

Estradiol inhibits the estrone sulfatase activity in normal and cancerous human breast tissues

It is well accepted that estradiol (E₂) plays an important role in the genesis and evolution of breast cancer. Quantitative evaluation indicates that in human breast tumor, estrone sulfate (E₁S) ‘via sulfatase’ is a much more likely precursor for E₂ than is androstenedione ‘via aromatase’. In previous studies, it was demonstrated that in isolated MCF-7 and T-47D breast cancer cell lines, estradiol can block estrone sulfatase activity. In the present study, the effect of E₂ was explored using total normal and cancerous breast tissues. This study was carried out with post-menopausal patients with breast cancer. None of the patients had a history of endocrine, metabolic or hepatic diseases or had received treatment in the previous 2 months. Each patient received local anaesthetic (lidocaine 1%) and two regions of the mammary tissue were selected: (A) the tumoral tissue and (B) the distant zone (glandular tissue) which was considered as normal. Samples were placed in liquid nitrogen and stored at –80 °C until enzyme activity analysis. Breast cancer histotypes were ductal and post-menopausal stages were T2. Homogenates of tumoral or normal breast tissues (45–75 mg) were incubated in 20 mM Tris–HCl, pH 7.2 with physiological concentrations of [³H]-E₁S (5 × 10⁻⁹ M) alone or in the presence of E₂ (5 × 10⁻⁵ to 5 × 10⁻⁷ M) during 30 min or 3 h. E₁S, E₁ and E₂ were characterized by thin layer chromatography and quantified using the corresponding standard. The sulfatase activity is significantly more intense with the breast cancer tissue than normal tissue, since the concentration of E₁ was 3.20 ± 0.15 and 0.42 ± 0.07 pmol/mg protein, respectively after 30 min incubation. The values were 27.8 ± 1.8 and 3.5 ± 0.21 pmol/mg protein, respectively after 3 h incubation. Estradiol at the concentration of 5 × 10⁻⁷ M inhibits this conversion by 33% and 31% in cancerous and normal breast tissues, respectively and by 53% and 88% at the concentration of 5 × 10⁻⁵ M after 30 min incubation. The values were 24% and 18% for 5 × 10⁻⁷ M and 49% and 42% for 5 × 10⁻⁵ M, respectively after 3 h incubation. It was observed that [³H]-E₁S is only converted to [³H]-E₁ and not to [³H]-E₂ in normal or cancerous breast tissues, which suggests a low or no 17β-hydroxysteroid dehydrogenase (17β-HSD) Type 1 reductive activity in these experimental conditions. In conclusion, estradiol is a strong anti-sulfatase agent in cancerous and normal breast tissues. This data can open attractive perspectives in clinical trials using this hormone.