Measurement of ethanol concentration using solvent extraction and dichromate oxidation and its application to bioethanol production process

A method for measuring the ethanol concentration in a yeast culture broth was developed using both microtubes and a 96-deepwell microplate. The strategy involved first the solvent extraction of ethanol from the yeast culture broth and measurements of the ethanol concentration using the dichromate oxidation method. Particular focus was made on selecting the extraction solvent as well as determining the measurable range of ethanol concentrations using this solvent extraction-dichromate oxidation method. This method was developed as an assay format in 2.0-ml microtubes and 1.2-ml 96-deepwell microplates, and the ethanol concentration in the batch cultures and fed-batch fermentations was measured. Tri-n-butyl phosphate [non-alcoholic solvent, density = 0.9727, solubility in water = 0.028% (w/v)] was used for solvent extraction when measuring the ethanol concentration from the yeast culture broth. The maximum detectable ethanol concentration was 8% (v/v) when 10 g potassium dichromate in 100 ml of 5 M sulfuric acid was used. The concentrations determined from the solvent extraction-dichromate oxidation methods were remarkably similar to those of gas chromatography in which samples were prepared from seven experiments, such as four batch cultures and three fed-batch fermentations.     

Repeated use of yeast biomass in ethanol fermentation of juniper berry sugars

Summary The object of this study was to establish the possibility of using the yeast biomass separated from the fermentation broth at the end of ethanol fermentation of juniper berry sugars as an inoculum in successive batch fermentation processes. A part of the fermentation broth (10% v/v) and a suspension of yeast biomass (separated from the same broth) into the water extract of juniper berries (2 g of wet yeast biomass per liter of water extract) were used as inocula. It was shown that the suspension of yeast biomass could be used as inoculum in successive batch processes without negative effects on the kinetics and ethanol yield, but with positive effects on the capacity and economy of the bioprocess. The addition of ammonium salts at optimum levels did not affect the final ethanol concentrations (4.3–4.4% v/v), but enhanced the specific rate of ethanol production, thus reducing the process duration by about five times.     

Continuous ethanol production using induced yeast aggregates

Summary The induction of yeast cell aggregates in a column reactor was initiated by packing yeast cell paste of Saccharomyces uvarum into the column, and then YMP broth was fed into the column from the bottom at a linear flow rate of 2.5 cm/h. Thereafter, yeast cells aggregated in the column within 48 h without a supply of oxygen. When this yeast aggregate column reactor was used for continuous ethanol production, a final ethanol concentration of 10.8% (w/v) was obtained from 23% (w/v) of glucose in a YMP broth with a dilution rate of 0.05 h^-1, and 4.9% (w/v) was obtained from 10% (w/v) of glucose with a dilution rate of 0.6 h^-1. The theoretical yield was above 97% in both cases. The ethanol production rates were 13 g¹ h^-1 l^-1 and 90 g¹ h^-1 l^-1 for producing 10.8% (w/v) and 4.9% (w/v) of ethanol respectively. This column reactor was maintained at a steady state for more than one month.     

Selection and characterization of a newly isolated thermotolerant Pichia kudriavzevii strain for ethanol production at high temperature from cassava starch hydrolysate

Pichia kudriavzevii DMKU 3-ET15 was isolated from traditional fermented pork sausage by an enrichment technique in a yeast extract peptone dextrose (YPD) broth, supplemented with 4 % (v/v) ethanol at 40 °C and selected based on its ethanol fermentation ability at 40 °C in YPD broth composed of 16 % glucose, and in a cassava starch hydrolysate medium composed of cassava starch hydrolysate adjusted to 16 % glucose. The strain produced ethanol from cassava starch hydrolysate at a high temperature up to 45 °C, but the optimal temperature for ethanol production was at 40 °C. Ethanol production by this strain using shaking flask cultivation was the highest in a medium containing cassava starch hydrolysate adjusted to 18 % glucose, 0.05 % (NH₄)₂SO₄, 0.09 % yeast extract, 0.05 % KH₂PO₄, and 0.05 % MgSO₄·7H₂O, with a pH of 5.0 at 40 °C. The highest ethanol concentration reached 7.86 % (w/v) after 24 h, with productivity of 3.28 g/l/h and yield of 85.4 % of the theoretical yield. At 42 °C, ethanol production by this strain became slightly lower, while at 45 °C only 3.82 % (w/v) of ethanol, 1.27 g/l/h productivity and 41.5 % of the theoretical yield were attained. In a study on ethanol production in a 2.5-l jar fermenter with an agitation speed of 300 rpm and an aeration rate of 0.1 vvm throughout the fermentation, P. kudriavzevii DMKU 3-ET15 yielded a final ethanol concentration of 7.35 % (w/v) after 33 h, a productivity of 2.23 g/l/h and a yield of 79.9 % of the theoretical yield.     

Integration and expression of theEscherichia coli xylose isomerase gene inSchizosaccharomyces pombe

Summary The xyclose isomerase gene inEscherichia coli was cloned complementarily into a Leu2-negativeSchizosaccharomyces pombe mutant (ATCC 38399). The subsequent integration of the plasmid into the chromosomal DNA of the host yeast was verified by using the dot blot and southern blot techniques. The expressed xylose isomerase showed activity on a nondenaturing polyacrylamide gel. The expression of xylose isomerase gene was influenced by the concentration of nutrients in the fermentation broth. The yeast possessed a xylose isomerase activity of 20 nmol/min/mg by growing in an enriched medium containing yeast extract-malt extract-peptone (YMP) andd-xylose. The conversion ofd-xylose tod-xylulose catalyzed by xylose isomerase in the transformed yeast cells makes it possible to fermentd-xylose with ethanol as a major product. When the fermentation broth contained YMP and 5% (w/v)d-xylose, the maximal ethanol yield and productivity reached 0.42 g/g and 0.19 g/l/h, respectively.     

Ethanol fermentation from molasses at high temperature by thermotolerant yeast Kluyveromyces sp. IIPE453 and energy assessment for recovery

High temperature ethanol fermentation from sugarcane molasses B using thermophilic Crabtree-positive yeast Kluyveromyces sp. IIPE453 was carried out in batch bioreactor system. Strain was found to have a maximum specific ethanol productivity of 0.688 g/g/h with 92 % theoretical ethanol yield. Aeration and initial sugar concentration were tuning parameters to regulate metabolic pathways of the strain for either cell mass or higher ethanol production during growth with an optimum sugar to cell ratio 33:1 requisite for fermentation. An assessment of ethanol recovery from fermentation broth via simulation study illustrated that distillation-based conventional recovery was significantly better in terms of energy efficiency and overall mass recovery in comparison to coupled solvent extraction–azeotropic distillation technique for the same.     

Optimization of ectoine synthesis through fed-batch fermentation of Brevibacterium epidermis

A production process for ectoine has been developed, using Brevibacterium epidermis DSM20659 as the producer strain. First, the optimal conditions for intracellular synthesis of ectoine were determined. The size of the intracellular ectoine pool is shown to be dependent on the external salt concentration, type of carbon source, and yeast extract concentration. Under the optimized conditions of 1 M NaCl, 50 g/L monosodium glutamate, and 2.5 g/L yeast extract, a maximum concentration of intracellular ectoine of 0.9 g/L was obtained in shake flask cultures. After optimizing the batch fermentation parameters of temperature, pH, agitation, and aeration, the yield could be further increased by applying the fed-batch fermentation principle in 1.5- to 2-L fermentors. Glutamate and yeast extract were fed to the bacterial cells such that the total glutamate concentration in the broth remained constant. A total yield of 8 g ectoine/L fermentation broth was obtained with a productivity of 2 g ectoine/L/day. After the bacterial cells were harvested from the culture broth, the ectoine was recovered from them by a two-step extraction with water and ethanol. Crystallization of the product was obtained after concentration of the extract via evaporation under reduced pressure. After this downstream process, 55% of the ectoine produced in the fermentor could be crystallized in four fractions. The first fractions were of very high purity (98%). This production process can compete with other described production processes for ectoine in productivity and simplicity. Further advantages are the relatively low amounts of NaCl needed and the absence of hydroxyectoine, often a byproduct, in the final product.     

Extractive fermentation for butyric acid production from glucose by Clostridium tyrobutyricum

A novel extractive fermentation for butyric acid production from glucose, using immobilized cells of Clostridium tyrobutyricum in a fibrous bed bioreactor, was developed by using 10% (v/v) Alamine 336 in oleyl alcohol as the extractant contained in a hollow-fiber membrane extractor for selective removal of butyric acid from the fermentation broth. The extractant was simultaneously regenerated by stripping with NaOH in a second membrane extractor. The fermentation pH was self-regulated by a balance between acid production and removal by extraction, and was kept at approximately pH 5.5 throughout the study. Compared with conventional fermentation, extractive fermentation resulted in a much higher product concentration (>300 g/L) and product purity (91%). It also resulted in higher reactor productivity (7.37 g/L. h) and butyric acid yield (0.45 g/g). Without on-line extraction to remove the acid products, at the optimal pH of 6.0, the final butyric acid concentration was only approximately 43.4 g/L, butyric acid yield was 0.423 g/g, and reactor productivity was 6.77 g/L. h. These values were much lower at pH 5.5: 20.4 g/L, 0.38 g/g, and 5.11 g/L. h, respectively. The improved performance for extractive fermentation can be attributed to the reduced product inhibition by selective removal of butyric acid from the fermentation broth. The solvent was found to be toxic to free cells in suspension, but not harmful to cells immobilized in the fibrous bed. The process was stable and provided consistent long-term performance for the entire 2-week period of study.     

An innovative consecutive batch fermentation process for very high gravity ethanol fermentation with self-flocculating yeast

An innovative consecutive batch fermentation process was developed for very high gravity (VHG) ethanol fermentation with the self-flocculating yeast under high biomass concentration conditions. On the one hand, the high biomass concentration significantly shortened the time required to complete the VHG fermentation and the duration of yeast cells suffering from strong ethanol inhibition, preventing them from losing viability and making them suitable for being repeatedly used in the process. On the other hand, the separation of yeast cells from the fermentation broth by sedimentation instead of centrifugation, making the process economically more competitive. The VHG medium composed of 255 g L⁻¹ glucose and 6.75 g L⁻¹ each of yeast extract and peptone was fed into the fermentation system for nine consecutive batch fermentations, which were completed within 8–14 h with an average ethanol concentration of 15% (v/v) and ethanol yield of 0.464, 90.8% of its theoretical value of 0.511. The average ethanol productivity that was calculated with the inclusion of the downstream time for the yeast flocs to settle from the fermentation broth and the supernatant to be removed from the fermentation system was 8.2 g L⁻¹ h⁻¹, much higher than those previously reported for VHG ethanol fermentation and regular ethanol fermentation with ethanol concentration around 12% (v/v) as well.     

Alcohol fermentation of starch by a genetic recombinant yeast having glucoamylase activity

Alcohol fermentation of starch was investigated using a direct starch fermenting yeast, Saccharomyces cerevisiae SR93, constructed by integrating a glucoamylase-producing gene (STA1) into the chromosome of Saccharomyces cerevisiae SH1089. The glucoamylase was constitutively produced by the recombinant yeast. The ethanol concentration produced by the recombinant yeast was 14.3 g/L which was about 1.5-fold higher than by the conventional mixed culture using an amylolytic microorganism and a fermenting microorganism. About 60% of the starch was converted into ethanol by the recombinant yeast, and the ethanol yield reached its maximum value of 0.48 at the initial starch concentration of 50 g/L. The fed-batch culture, which maintains the starch concentration in the range of 30 to 50 g/L, was used to produce a large amount of ethanol from starch. The amount of ethanol produced in the fed-batch culture increased about 20% compared to the batch culture. (c) 1997 John Wiley & Sons, Inc.     

Development of Suitable Solvent System for Downstream Processing of Biopolymer Pullulan Using Response Surface Methodology

Downstream processing is an important aspect of all biotechnological processes and has significant implications on quality and yield of the final product. Several solvents were examined for their efficacy on pullulan precipitation from fermentation broth. Interactions among four selected solvents and their effect on pullulan yield were studied using response surface methodology. A polynomial model was developed using D-optimal design and three contour plots were generated by performing 20 different experiments and the model was validated by performing optimization experiments. The results indicated that lower concentration of ethanol in combination with the other three solvents has resulted in higher yield of polymer from fermentation broth and the optimized solvent system was able to recover 1.44 times more pullulan as compared to the conventional ethanolic precipitation method. These observations may help in enhancing efficiency of pullulan recovery from fermentation broth and also result in reduced cost of production for the final product.     

Continuous ethanol fermentation using immobilized yeast cells

Growing cells of Saccharomyces cerevisiae immobilized in calcium alginate gel beads were employed in fluidizedbed reactors for continuous ethanol fermentation from cane molasses and other sugar sources. Some improvements were made in order to avoid microbial contamination and keep cell viability for stable long run operations. Notably, entrapment of sterol and unsaturated fatty acid into immobilized gel beads enhanced ethanol productivity more than 50 g ethanol/L gel h and prolonged life stability for more than one-half year. Cell concentration in the carrier was estimated over 250 g dry cell/L gel. A pilot plant with a total column volume of 4 kL was constructed and has been operated since 1982. As a result, it was confirmed that 8-10%(v/v)ethanol-containing broth was continuously produced from nonsterilized diluted cane molasses for over one-half year. The productivity of ethanol was calculated as 0.6 kL ethanol/kL reactor volume day with a 95% conversion yield versus the maximum theoretical yield for the case of 8.5% (v/v) ethanol broth.     

Ethanol production by Kluyveromyces lactis immobilized cells in copolymer carriers produced by radiation polymerization

The conditions for batch and continuous production of ethanol, using immobilized growing yeast cells of Kluyveromyces lactis, have been optimized. Yeast cells have been immobilized in hydrogel copolymer carriers composed of polyvinyl alcohol (PVA) with various hydrophilic monomers, using radiation copolymerization technique. Yeast cells were immobilized through adhesion and multiplication of yeast cells themselves. The ethanol production of immobilized growing yeast cells with these hydrogel carriers was related to the monomer composition of the copolymers and the optimum monomer composition was hydroxyethyl methacrylate (HEMA). In this case by using batch fermentation, the superior ethanol production was 32.9 g L(-1) which was about 4 times higher than that of cells in free system. The relation between the activity of immobilized yeast cells and the water content of the copolymer carriers was also discussed. Immobilized growing yeast cells in PVA: HEMA (7%: 10%, w/w) hydrogel copolymer carrier, were used in a packed-bed column reactor for the continuous production of ethanol from lactose at different levels of concentrations (50, 100 and 150) g L(-1). For all lactose feed concentrations, an increase in dilution rates from 0.1 h(-1) to 0.3 h(-1) lowered ethanol concentration in fermented broth, but the volumetric ethanol productivity and volumetric lactose uptake rate were improved. The fermentation efficiency was lowered with the increase in dilution rate and also at higher lactose concentration in feed medium and a maximum of 70.2% was obtained at the lowest lactose concentration 50 g L(-1).     

还原型谷胱甘肽高产菌株的初筛及其提取工艺优化

目的:筛选还原型谷胱甘肽(GSH)高产菌株并优化其提取工艺.方法:从中科院沈阳应用生态研究所菌种保藏室的酵母菌库中筛选GSH高产的酵母菌,改进培养基组分,提高胞内GSH含量,并优化热水抽提和乙醇提取两种方法,提高提取液中GSH含量.结果:筛选获得一株酿酒酵母Y,其胞内GSH含量9.60 mg/g,培养基改良后,胞内GSH含量又提高了34.8%.通过单因素和正交试验确定热水抽提法最优提取条件为:料液比1∶3,pH 2.0,在90℃水浴中,抽提10min,GSH的产量可达14.27mg/g干菌体.结论:添加氨基酸和葡萄糖都有利于酵母菌体的生长和GSH合成.热水抽提法较乙醇提取法相比,提取效果好、无污染、操作简单,为后续的分离纯化工作奠定基础.     

Ethanol fermentation of raw cassava starch with Rhizopus koji in a gas circulation type fermentor

Studies have been conducted in a gas circulation type fermentor in order to characterize the ethanol fermentation of uncooked cassava starch with Rhizopus koji. Results showed that ethanol concentration reached 13-14% (v/v) in 4-day broth, and the maximum productivity of ethanol was 2.3 g ethanol/L broth h. This productivity was about 50% compared to the productivity of a glucose-yeast system. Ethanol yield reached 83.5-72.3% of the theoretical yield for the cassava starch used. The fermentor used in the present work has been proven by experiment to be suitable for ethanol fermentation of the broth with solid substrate.     

Ethanol extraction by supported liquid membrane during fermentation

A supported liquid membrane system was developed for the extraction of ethanol during semicontinuous fermentation of Saccharomyces bayanus. it consisted of a porous Teflon sheet as support, soaked with isotridecanol. This assembly permitted combining biocompatibility, permeation efficiency, and stability. The removal of ethanol from the cultures led to decreased inhibition and, thus, to a gain in conversion of 452 g/L glucose versus 293 g/L glucose without extraction. At the same time, the ethanol volumetric productivity was enhanced 2.5 times, due to an improvement of yeast viability, while the substrate conversion yield was maintained above 95% of its theoretical value. Besides these improvements in fermentation performances, the process resulted in ethanol purification, since the separation was selective towards microbial cells and carbon substrate, and likely selective to mineral ions present in the fermentation broth. For pervaporation, a concentration of ethanol four times greater was obtained in the collected permeate.     

D-Xylose fermentation to ethanol bySchizosaccharomyces pombe cloned with xylose isomerase gene

Summary Schizosaccharomyces pombe cloned with the xylose isomerase gene from E. coli is able to grow on YNB and YMP broths containing xylose as the sole carbon source. This yeast can ferment D-xylose to ethanol directly; however, the ethanol production rate and the yield were dependent on the nitrogen source. With the YMP broth as a nitrogen source, the final ethanol concentration can reach 3.7% (w/v), and the ethanol yield was 80% of the theoretical value based on the amount of xylose that was metabolized. The ethanol production is slow, and the xylitol production is still very active; apparently, the limiting step is the isomerization of xylose to xylulose.     

Simultaneous solid–liquid separation and primary purification of clavulanic acid from fermentation broth of Streptomyces clavuligerus using salting‐out extraction system

Clavulanic acid (CA) is usually used together with other β‐lactam antibiotics as combination drugs to inhibit bacterial β‐lactamases, which is mainly produced from the fermentation of microorganism such as Streptomyces clavuligerus. Recently, it is still a challenge for downstream processing of low concentration and unstable CA from fermentation broth with high solid content, high viscosity, and small cell size. In this study, an integrated process was developed for simultaneous solid–liquid separation and primary purification of CA from real fermentation broth of S. clavuligerus using salting‐out extraction system (SOES). First, different SOESs were investigated, and a suitable SOES composed of ethanol/phosphate was chosen and further optimized using the pretreated fermentation broth. Then, the optimal system composed of 20% ethanol/15% K₂HPO₄ and 10% KH₂PO₄ w/w was used to direct separation of CA from untreated fermentation broth. The result showed that the partition coefficient (K) and recovery yield (Y) of CA from untreated fermentation broth were 29.13 and 96.8%, respectively. Simultaneously, the removal rates of the cells and proteins were 99.8% and 63.3%, respectively. Compared with the traditional method of membrane filtration or liquid–liquid extraction system, this developed SOES showed the advantages of simple operation, shorter operation time, lower process cost and higher recovery yield of CA. These results demonstrated that the developed SOES could be used as an attractive alternative for the downstream processing of CA from real fermentation broth.     

Role of phosphatidylinositol (PI) in ethanol production and ethanol tolerance by a high ethanol producing yeast

The effect of inositol addition on phospholipids, cell growth, ethanol production and ethanol tolerance in a high ethanol producing Saccharomyces sp were studied. Addition of inositol greatly influenced major phospholipid synthesis. With inositol in the fermentation medium, phosphatidylinositol (PI) content was increased, while phosphatidylcholine (PC) and phosphatidylethanolamine (PE) were decreased. However, without inositol in the fermentation medium, PI content dropped down within 24 h, then increased, but was lower than in the presence of inositol. When yeast cells had a higher content of PI, they produced ethanol much more rapidly and tolerated higher concentrations of ethanol. During ethanol shock treatment at 18% (v/v) ethanol, yeast cells with a higher concentration of PI lost their viability much more slowly than those with a lower concentration of PI, indicating that the PI content in these yeast cells can play an important role in ethanol production and ethanol tolerance. Fatty acids and ergosterol were not responsible for high ethanol tolerance and high ethanol production in this yeast strain. Received 22 September 1998/ Accepted in revised form 20 December 1998     

Production of 21% (v/v) ethanol by fermentation of very high gravity (VHG) wheat mashes

Summary Very high gravity wheat mashes containing 300 g or more sugares per liter were prepared by enzymatic hydrolysis of starch and fermented with a commercial preparation of active dry yeast. The active dry yeast used in this study was a blend of several strains ofSaccharomyces cerevisiae. The fermentation was carried out at 20°C at different pitching rates (inoculation levels) with and without the addition of yeast extract as nutrient supplement. At a pitching rate of 76 million cells per g of mash an ethanol yield of 20.4% (v/v) was obtained. To achieve this yeast extract must be added to the wheat mash as nutrient supplement. When the pitching rate was raised to 750 million cells per g of mash, the ethanol yield increased to 21.5% (v/v) and no nutrient supplement was required. The efficiency of conversion of sugar to ethanol was 97.6% at the highest pitching rate. This declined slightly with decreasing pitching rate. A high proportion of yeast cells lost viability at high pitching rates. It is suggested that nutrients released from yeast cells that lost viability and lysed, contributed to the high yield of ethanol in the absence of any added nutrients.