Sequence Analysis of a Small Cryptic Plasmid Isolated from Streptococcus suis Serotype 2

A small cryptic plasmid designated pSSU1 was isolated from Streptococcus suis serotype 2 strain DAT1. The complete sequence of pSSU1 was 4975 bp and contained six major open reading frames (ORFs). ORF1 and ORF2 encode for proteins highly homologous to CopG and RepB of the pMV158 family, respectively. ORF5 encodes for a protein highly homologous to Mob of pMV158. ORF4 encodes for a protein highly homologous to orf3 of pVA380-1 of S. ferus, but its function is unknown. There was no similarity between ORF3 and ORF6 and other protein sequences. In this plasmid, the ORF1 (CopG protein) was preceded by two multiples of direct repeat and the conserved nucleotides that could be the double-strand origin (DSO) of rolling circle replication (RCR) mechanism. The ORF5 (Mob protein) was followed by a potential hairpin loop that could be the single-strand origin (SSO) of RCR mechanism. The sequence, which was complementary to the leader region of Rep mRNA, was homologous to the countertranscribed RNA (ctRNA) of pLS1. Moreover, a 5-amino acid conserved sequence was found in C terminal of Rep and putative Rep proteins of several pMV158 family plasmids. These observations suggest that this plasmid replicates by use of the rolling circle mechanism. Received: 26 June 1999 / Accepted: 10 August 1999     

植物乳杆菌PC518质粒pLP224的发现以及pMV158家族质粒的保守性和多样性分析

【背景】植物乳杆菌含有丰富的天然质粒,分析这些质粒的序列特征有利于分析质粒所携带的遗传信息。【目的】分析从植物乳杆菌PC518分离的新质粒pLP224,聚类分析其所属家族质粒的保守性与多样性。【方法】提取植物乳杆菌PC518的质粒,酶切后构建质粒DNA文库,测序和BLAST鉴定文库中的新序列;通过反向PCR完成质粒全序列测定,注释新质粒;使用进化树软件MEGA X构建质粒的Rep蛋白进化树,并分析结合序列的变化。【结果】从植物乳杆菌PC518分离出一个质粒pLP224,大小为1 766 bp,其中(G+C)mol%含量为41.39%,与已知质粒的最大序列相似性为86.85%。推定其复制方式为滚环复制,属于pMV158家族成员。17个pMV158家族质粒的Rep蛋白分析表明：pMV158家族质粒的Rep蛋白进化距离越近,其dso位点的结合序列相似性越高,进化距离越远则其序列相似性越低。【结论】 pLP224是pMV158家族的新成员。pMV158家族质粒在dso位点的切开序列上保守,在结合序列上多样。其Rep蛋白随结合序列变化而不同。这种差异有利于pMV158家族不同成员在同一宿主的共存,是家族成员持续存在并稳定进化的基础。     

Characterization of a cryptic plasmid pM4 from Lactobacillus plantarum M4

A cryptic plasmid from Lactobacillus plantarum M4 isolated from fresh milk, designated as pM4, was sequenced and characterized. It was 3320 bp in length with a G+C content of 38.73 mol%. The plasmid pM4 was predicted to encode three putative ORFs, in which ORF1 shared 99% and 98% homology, respectively, with the Rep proteins of reported plasmids pWCFS101 and pF8801, members of the rolling circle replication (RCR) pC194 family. Sequence analysis revealed a typical pC194 family double strand origin (dso) and a putative single strand origin (sso) located upstream of the rep gene. Mung bean nuclease analysis and Southern hybridization confirmed the presence of single-stranded DNA (ssDNA) intermediates, suggesting that pM4 belongs to the RCR pC194 family. Accumulation of ssDNA in rifampicin-treated strains implied that the host-encoded RNA polymerase was involved in the conversion of ssDNA to double-stranded DNA. Furthermore, the relative copy number of pM4 was estimated to be about 25 in each cell by real-time PCR. The new RCR plasmid would be valuable in constructing cloning vectors for application in the food industry.     

Characterization of a Rolling-Circle Replication Plasmid pLR1 from <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> LR1

A cryptic plasmid from Lactobacillus plantarum LR1, designated pLR1, was sequenced and characterized. It consisted of a 2066-bp circular molecule with a G + C content of 52.7%. The plasmid pLR1 was predicted to contain five putative ORFs, in which ORF1 shared 93% and 92% identity with Rep proteins of pLP1 and pC30il, members of rolling-circle replication (RCR) pC194 family. Detection of single-stranded DNA (ssDNA) intermediates by Southern hybridization and mung bean nuclease treatment confirmed that pLR1 replicated via the RCR mechanism. Accumulation of ssDNA in rifampicin-treated strains implied that the host-coded RNA polymerase was involved in the conversion of ssDNA to double-stranded DNA (dsDNA). Furthermore, the copy number of pLR1 was estimated to be 36 in each cell by real-time polymerase chain reaction.     

Characterization of a novel rolling-circle replication plasmid pYSI8 from Lactobacillus sakei YSI8

A plasmid from Lactobacillus sakei YSI8, designated as pYSI8, was sequenced and characterized. It consisted of a 4973 bp circular molecule with a G + C content of 35.6%. The plasmid pYSI8 was predicted to contain five putative ORFs, in which ORF1 shared 79% and 76% identity with Rep proteins of pLH2 and pLC2, members of rolling-circle replication (RCR) pMV158 family. Detection of single-stranded DNA (ssDNA) intermediates by Southern hybridization and mung bean nuclease treatment confirmed that pYSI8 replicated via the RCR mechanism. Accumulation of ssDNA in rifampicin-treated strains implied that the host-encoded RNA polymerase was involved in the conversion of ssDNA to double-stranded DNA (dsDNA). Furthermore, the copy number of pYSI8 was estimated to be 41.9 ± 0.5 in each cell by real-time polymerase chain reaction.     

Characterization of a cryptic plasmid from Bacillus sphaericus strain LP1-G

A cryptic plasmid from Bacillus sphaericus strain LP1-G, designated as pLG, was sequenced and characterized. It was an 11,066bp circular molecule, with G+C content of 37%. The plasmid pLG was predicted to encode 23 putative ORFs, and ORF 21 shared the highest identity with Rep of pGI1 and pBMB9741, members of rolling-circle replication (RCR) pC194-family. Sequence analysis revealed a pC194-type double strand origin (dso) and a single strand origin (sso) like sequence located upstream and downstream of ORF 21, respectively. Moreover, Mung bean nuclease analysis and Southern hybridization confirmed the existence of single stranded DNA (ssDNA) intermediates, indicating that pLG belongs to the RCR pC194-family. Accumulation of multiple ssDNA intermediates in native strain LP1-G and decline of ssDNA and supercoiled DNA in rifampicin-treated strain implied that a special mechanism might be employed by pLG. Furthermore, the copy number of pLG in its original host was determined and about 58 copies of the plasmid exist in each cell. Subcloning and transformation experiments proved that the minimal replicon of pLG was within a 1.6-kb fragment, which was composed of rep gene and dso. These data are a good basis for the understanding of replication mechanisms and genetics of this B. sphaericus plasmid.     

In vivo definition of the functional origin of leading strand replication on the lactococcal plasmid pFX2

The lactococcal plasmid pFX2 belongs to a family of plasmids, whose prototype is the streptococcal plasmid pMV158, that replicates by the rolling circle mechanism. Determination of the nucleotide sequence of the repX gene of pFX2 allowed us to make some minor corrections in the published sequence, and to show that the repX gene is identical to the rep gene of plasmid pWV01. We have established pFX2 in Escherichia coli and in Streptococcus pneumoniae. In the latter host, we have defined in vivo the nick site introduced by the RepX protein. Plasmid pFX2 and the pMV158 derivative pLS1 exhibit a moderate degree of incompatibility in S. pneumoniae. Cloning of the double strand origin (dso) of pFX2 into a high-copy-number plasmid that is compatible with the pMV158 replicon led to an increase in incompatibility toward pLS1. Plasmids pFX2 and pLS1 exhibit homologies in their Rep proteins and in their dso sequences, but not in their negative control elements. Thus, the observed incompatibility indicates that cross-recognition of Rep proteins and dso takes place. Received: 25 May 1998 / Accepted: 8 July 1998     

A functional lagging strand origin does not stabilize plasmid pMV158 inheritance in Escherichia coli

Plasmid rolling circle replication generates single-stranded DNA intermediates. The intracellular amount of these molecules depends upon the efficiency of the conversion of single-stranded into double-stranded plasmid forms, that is, the functionality of the lagging strand origin (sso). The broad-host-range streptococcal plasmid pMV158 harbors two different ssos, both of which function efficiently in Streptococcus pneumoniae but poorly in Escherichia coli. Plasmid pMV158 is stably inherited in the pneumococcal host, but it is unstable in E. coli. A pMV158 derivative lacking its two ssos is unstable in both strains. We have cloned into this derivative the coliphage f1 lagging strand origin. Whereas the f1 sso was fully functional in E. coli, it did not show any activity in S. pneumoniae, a bacteria closely related to the pMV158 natural host. The presence of the f1 sso did not stabilize pMV158 inheritance in either the gram-positive or the gram-negative host.     

Role of RepB in the replication of plasmid pJB01 isolated from Enterococcus faecium JC1

The plasmid pJB01 (GenBank Accession No. AY425961) isolated from the pathogenic bacterium, Enterococcus faecium JC1, is 2235 base pairs in length and consists of a putative double-strand origin (dso), a single-strand origin, a counter-transcribed RNA, and three open reading frames. A comparison of a few replication factors and motifs, bind and nic regions, for replication initiation on the nucleotide sequence level revealed that it belongs to the pMV158 family among RC-replicating plasmids. A runoff DNA synthesis assay demonstrated that nicking occurred between G525 and A526, which is located on the internal loop of a putative secondary structure in the dso. Unlike all the other plasmids of the pMV158 family having two or three direct repeats, pJB01 has three non-tandem direct repeats of 5'-CAACAAA-3' separated by four nucleotides, as the RepB-binding site in the dso. Moreover, the nick site on the internal loop is located at 77 nucleotides upstream from the RepB-binding region. Irrespective of the structural difference of direct repeats from other members of the pMV158 family, we think, it is still a new member of this plasmid family. The introduction of mutations in conserved regions of RepB confirmed that RepB N-moiety is important for nicking/nick-closing activity. Within N-moiety, especially all of the motif R-III, the Y100 in R-IV and Y116 in R-V residues, played particularly critical roles in this activity, however, for its binding, both of the N- and C-moieties of RepB were needed.     

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage phi X174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5' region has been identified and is functional in Bacillus subtilis.     

Conserved sequence motifs in the initiator proteins for rolling circle DNA replication encoded by diverse replicons from eubacteria, eucaryotes and archaebacteria.

An amino acid motif was identified that consists of the sequence HisHydrHisHydrHydrHydr (Hydr--bulky hydrophobic residue) and is conserved in two vast classes of proteins, one of which is involved in initiation and termination of rolling circle DNA replication, or RCR (Rep proteins), and the other in mobilization (conjugal transfer) of plasmid DNA (Mob proteins). Based on analogies with metalloenzymes, it is hypothesized that the two conserved His residues in this motif may be involved in metal ion coordination required for the activity of the Rep and Mob proteins. Rep proteins contained two additional conserved motifs, one of which was located upstream, and the other downstream from the 'two His' motif. The C-terminal motif encompassed the Tyr residue(s) forming the covalent link with nicked DNA. Mob proteins were characterized by the opposite orientation of the conserved motifs, with the (putative) DNA-linking Tyr being located near their N-termini. Both Rep and Mob protein classes further split into several distinct families. Although it was not possible to find a motif or pattern that would be unique for the entire Rep or Mob class, unique patterns were derived for large subsets of the proteins of each class. These observations allowed the prediction of the amino acid residues involved in DNA nicking, which is required for the initiation of RCR or conjugal transfer of single-stranded (ss) DNA, in Rep and Mob proteins encoded by a number of replicons of highly diverse size, structure and origin. It is conjectured that recombination has played a major part in the dissemination of genes encoding related Rep or Mob proteins among the replicons exploiting RCR. It is speculated that the eucaryotic small ssDNA replicons encoding proteins with the conserved RCR motifs and replicating via RCR-related mechanisms, such as geminiviruses and parvoviruses, may have evolved from eubacterial replicons.     

Demonstration of nicking/joining activity at the origin of DNA replication associated with the rep and rep' proteins of porcine circovirus type 1

The replication of porcine circovirus type 1 (PCV1) is thought to occur by rolling-circle replication (RCR), whereby the introduction of a single-strand break generates a free 3'-hydroxyl group serving as a primer for subsequent DNA synthesis. The covalently closed, single-stranded genome of PCV1 replicates via a double-stranded replicative intermediate, and the two virus-encoded replication-associated proteins Rep and Rep' have been demonstrated to be necessary for virus replication. However, although postulated to be involved in RCR-based virus replication, the mechanism of action of Rep and Rep' is as yet unknown. In this study, the ability of PCV1 Rep and Rep' to "nick" and "join" strand discontinuities within synthetic oligonucleotides corresponding to the origin of replication of PCV1 was investigated in vitro. Both proteins were demonstrated to be able to cleave the viral strand between nucleotides 7 and 8 within the conserved nonanucleotide motif (5'-TAGTATTAC-3') located at the apex of a putative stem-loop structure. In addition, the Rep and Rep' proteins of PCV1 were demonstrated to be capable of joining viral single-stranded DNA fragments, suggesting that these proteins also play roles in the termination of virus DNA replication. This joining activity was demonstrated to be strictly dependent on preceding substrate cleavage and the close proximity of origin fragments accomplished by base pairing in the stem-loop structure. The dual "nicking/joining" activities associated with PCV1 Rep and Rep' are pivotal events underlying the RCR-based replication of porcine circoviruses in mammalian cells.     

Characterization of the replication region of the Lactobacillus reuteri plasmid pTC82 potentially used in the construction of cloning vector

A 3.2 kb DNA fragment containing the replication region (RR) from pTC82 was cloned, sequenced, and found to contain elements typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR), including double-strand origin (DSO), replication protein gene (rep), and single-strand origin (SSO). The DSO of pTC82 contains two domains showing 55.5% and 84.6% similarities in nucleotide (nt) sequence to the conserved functional elements bind and nic, respectively, which are required for the initiation of the leading strand typical of the pC194-RCR family. Although the predicted rep gene product of pTC82 (Rep82) shares little identity (less than 24%) with other known Reps, a region containing three motifs, characteristic of the pC194-family Reps, was identified, indicating the Rep82 as a novel Rep protein of this family. Downstream of the rep82 gene, strong similarity to the typical palT type-SSO could be detected. This is the first palT type-SSO to be identified from Lactobacillus. Through a series of deletion studies, the minimal replicon of the cloned RR was found to be 2.66 kb in size including the DSO region and rep gene. This RR was further identified as being highly stable in L. reuteri and also bearing a very narrow host-range property, suggesting it to be a good replicon potentially useful in vector construction for developing L. reuteri as a vaccine carrier.