A novel and cost-effective methodology for enhanced production of industrially valuable alkaline xylano-pectinolytic enzymes cocktail in short solid-state fermentation cycle

The aim of this study was to enhance the production of xylano-pectinolytic enzymes concurrently and also to reduce the fermentation period. In this study, the effect of agro-residues extract-based inoculum on yield and fermentation time of xylano-pectinolytic enzymes was studied. Microbial inoculum and fermentation media were supplemented with xylan and pectin polysaccharides derived from agro-based residues. Enzymes production parameters were optimized through two-stage statistical design approach. Under optimized conditions (temperature 37°C, pH 7.2, K₂HPO₄ 0.22%, MgSO₄ 0.1%, gram flour 5.6%, substrate: moisture ratio 1:2, inoculum size 20%, agro-based crude xylan in production media 0.45%, and agro-based crude xylan–pectin in inoculum 0.13%), nearly 28,255 ± 565 and 9,202 ± 193 IU of xylanase and pectinase, respectively, were obtained per gram of substrate in a time interval of 6 days only. The yield of both xylano-pectinolytic enzymes was enhanced along with a reduction of nearly 24 h in fermentation time in comparison with control, using polysaccharides extracted from agro-residues. The activity of different types of pectinase enzymes such as exo-polymethylgalacturonase (exo-PMG), endo-PMG, exo-polygalacturonase (exo-PG), endo-PG, pectin lyase, pectate lyase, and pectin esterase was obtained as 1,601, 12.13, 5637, 24.86, 118.62, 124.32, and 12.56 IU/g, respectively, and was nearly twofold higher than obtained for all seven types in control samples. This is the first report mentioning the methodology for enhanced production of xylano-pectinolytic enzymes in short solid-state fermentation cycle using agro-residues extract-based inoculum and production media.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

Production of thermostable pectinase and xylanase for their potential application in bleaching of kraft pulp

A very high level of alkalophilic and thermostable pectinase and xylanase has been produced from newly isolated strains of Bacillus subtilis and Bacillus pumilus respectively. Enzyme production for pectinase was carried out under SSF using combinations of cheap agricultural residues while xylanase was produced under submerged fermentation using wheat bran as substrate to minimize the cost of production of these enzymes Among the various substrates tested, the highest yield of pectinase production was observed by using combination of WB + CW (6592 U/g of dry substrate) supplemented with 4% yeast extract when incubated at 37 °C for 72 h using deionized water of pH 7.0 as moistening agent. The biobleaching effect of these cellulase free enzymes on kraft pulp was determined. Both xylanase and pectinase showed stability over a broad range of pH from 6 to 10 and temperature from 55 to 70 °C. The bleaching efficiency of the pectinase and xylanase on kraft pulp was maximum after 150 min at 60 °C using enzyme dosage of 5 IU/ml of each enzyme at 10% pulp consistency with about 16% reduction in kappa number and 84% reduction in permanganate number. Enzyme treated pulp when subjected to CDED₁D₂ steps, 25% reduction in chlorine consumption and upto 19% reduction in consumption of chlorine dioxide was observed for obtaining the same %ISO brightness. Also an increase of 22 and 84% in whiteness and fluorescence respectively and a decrease of approximately 19% in the yellowness of the biotreated pulp were observed by pretreatment of the pulp with our enzymatic mixture.     

Production and characterization of thermostable xylanase and pectinase from Streptomyces sp. QG-11-3

Streptomyces sp. QG-11-3, which produces a cellulase-free thermostable xylanase (96 IU ml⁻¹) and a pectinase (46 IU ml⁻¹), was isolated on Horikoshi medium supplemented with 1% w/v wheat bran. Carbon sources that favored xylanase production were rice bran (82 IU ml⁻¹) and birch-wood xylan (81 IU ml⁻¹); pectinase production was also stimulated by pectin and cotton seed cake (34 IU ml⁻¹ each). The partially purified xylanase and pectinase were optimally active at 60°C. Both enzymes were 100% stable at 50°C for more than 24 h. The half-lives of xylanase and pectinase at 70, 75 and 80°C were 90, 75 and 9 min, and 90, 53 and 7 min, respectively. The optimum pH values for xylanase and pectinase were 8.6 and 3.0, respectively, at 60°C. Xylanase and pectinase were stable over a broad pH range between 5.4 and 9.4 and 2.0 to 9.0, respectively, retaining more than 85% of their activity. Ca²⁺ stimulated the activity of both enzymes up to 7%, whereas Cd²⁺, Co²⁺, Cr³⁺, iodoacetic acid and iodoacetamide inhibited xylanase up to 35% and pectinase up to 63%; at 1 mM, Hg²⁺ inhibited both enzymes completely. Journal of Industrial Microbiology & Biotechnology (2000) 24, 396–402. Received 29 September 1999/ Accepted in revised form 02 February 2000     

Enhancement of <Emphasis Type="Italic">Penicillium echinulatum</Emphasis> glycoside hydrolase enzyme complex

The enhancement of enzyme complex produced by Penicillium echinulatum grown in several culture media components (bagasse sugarcane pretreated by various methods, soybean meal, wheat bran, sucrose, and yeast extract) was studied to increment FPase, xylanase, pectinase, and β-glucosidase enzyme activities. The present results indicated that culture media composed with 10 g/L of the various bagasse pretreatment methods did not have any substantial influence with respect to the FPase, xylanase, and β-glucosidase attained maximum values of, respectively, 2.68 FPU/mL, 2.04, and 115.4 IU/mL. On the other hand, proposed culture media to enhance β-glucosidase production composed of 10 g/L steam-exploded bagasse supplemented with soybean flour 5.0 g/L, yeast extract 1.0 g/L, and sucrose 10.0 g/L attained, respectively, 3.19 FPU/mL and 3.06 IU/mL while xylanase was maintained at the same level. The proteomes obtained from the optimized culture media for enhanced FPase, xylanase, pectinase, and β-glucosidase production were analyzed using mass spectrometry and a panel of GH enzyme activities against 16 different substrates. Culture medium designed to enhance β-glucosidase activity achieved higher enzymatic activities values (13 measured activities), compared to the culture media for FPase/pectinase (9 measured activities) and xylanase (7 measured activities), when tested against the 16 substrates. Mass spectrometry analyses of secretome showed a consistent result and the greatest number of spectral counts of Cazy family enzymes was found in designed β-glucosidase culture medium, followed by FPase/pectinase and xylanase. Most of the Cazy identified protein was cellobiohydrolase (GH6 and GH7), endoglucanase (GH5), and endo-1,4-β-xylanase (GH10). Enzymatic hydrolysis of hydrothermally pretreated sugarcane bagasse performed with β-glucosidase enhanced cocktail achieved 51.4 % glucose yield with 10 % w/v insoluble solids at enzyme load of 15 FPU/g material. Collectively the results demonstrated that it was possible to rationally modulate the GH activity of the enzymatic complex secreted by P. echinulatum using adjustment of the culture medium composition. The proposed strategy may contribute to increase enzymatic hydrolysis of lignocellulosic materials.     

Isolation,screening, and optimization of bacterial strains for novel transglutaminase production

Transglutaminases are a class of transferases known to form isopeptide bond between glutamine and lysine residues in a protein molecule. Increasing demand for transglutaminase in food and other industries and its low productivity have compelled researchers to isolate and screen micro-organisms with potential to produce it. In the present investigation around 200 isolates were screened for extracellular secretion of microbial transglutaminase (MTGase). Isolate B4 showed enzyme activity of 1.71?±?0.2?U/mL followed by isolate C2 which showed 1.61?±?0.17?U/mL activity, comparable with the activity of industrially used microbial strains. Biochemical analysis along with 16S r-RNA sequencing revealed these isolates (B4 and C2) to be Bacillus nakamurai and a variant of Bacillus subtilis, respectively. Amongst the various production media screened, a medium containing starch and peptone was found best for MTGase production. Correlation between growth, enzyme production, and sugar utilization was also studied and maximum enzyme production was obtained after 48 to 60?hr. Highest MTGase titer (3.95?±?0.03?U/mL for B4 and 2.65?±?0.17?U/mL for C2) was obtained by optimization of parameters. The enzyme was characterized for temperature and pH optima, pH and thermal stability, and effect of metal ions, suggesting its potential use in future applications.     

Rice straw fermentation by Schizophyllum commune ARC-11 to produce high level of xylanase for its application in pre-bleaching

Rice straw is valuable resource that has been used as substrate for cost effective production of xylanase under solid-state fermentation by a newly isolated white rot fungi, S. commune ARC-11. Out of eleven carbon sources tested, rice straw was found most effective for the induction of xylanase that produced 4288.3?IU/gds of xylanase by S. commune ARC-11. Maximum xylanase production (6721.9?IU/gds) was observed on 8^th day of incubation at temperature (30?°C), initial pH (7.0) and initial moisture content (70.0%). The supplementation of ammonium sulphate (0.08% N, as available nitrogen) enhanced the xylanase production up to 8591.4?IU/gds. The xylanase production by S. commune ARC-11 was further improved by the addition of 0.10%, (w/v) of Tween-20 as surfactant. The maximum xylanase activities were found at pH 5.0 and temperature 55?°C with a longer stability (180?min) at temperature 45, 50 and 55?°C. This xylanase preparation was also evaluated for the pre-bleaching of ethanol-soda pulp from Eulaliopsis binata. An enzyme dosage of 10?IU/g of xylanase resulted maximum decrease in kappa number (14.51%) with a maximum improvement 2.9% in ISO brightness compared to control.     

Enhanced production of an alkaline pectinase from Streptomyces sp. RCK-SC by whole-cell immobilization and solid-state cultivation

An alkalophilic Streptomyces sp. RCK-SC, which produced a thermostable alkaline pectinase, was isolated from soil samples. Pectinase production at 45 °C in shaking conditions (200 rev min⁻¹) was optimal (76,000 IU l⁻¹) when a combination of glucose (0.25% w/v) and citrus pectin (0.25% w/v) was added along with urea (0.25% w/v) in the basal medium devoid of yeast extract and peptone. All the tested amino acids and vitamins greatly induced pectinase production and increased the specific productivity of pectinase up to 550%. In an immobilized cell system containing polyurethane foam (PUF), the pectinase production was enhanced by 32% (101,000 IU l⁻¹) compared to shake flask cultures. In solid-state cultivation (SSC) conditions, using wheat bran as solid substrate, pectinase yield of 4857 IU g⁻¹ dry substrate was obtained at substrate-to-moisture ratio of 1:5 after 72 h of incubation. The partially purified pectinase was optimally active at 60 °C and retained 80% of its activity at 50 °C after 2 h of incubation. The half life of pectinase was 3 h at 70 °C. Pectinase was stable at alkaline pH ranging from 6.0 to 9.0 for more than 8 h at room temperature retaining more than 50% of its activity. This revised version was published online in August 2006 with corrections to the Cover Date.     

Optimization of conditions for the production of lignocellulolytic enzymes by Sphingobacterium sp. ksn-11 utilizing agro-wastes under submerged condition

Abstract

The present work was aimed at studying the production of lignocellulolytic enzymes, namely cellulase, xylanase, pectinase, mannanase, and laccase by a newly isolated bacterium Sphingobacterium sp. ksn-11, utilizing various agro-residues as a substrate under submerged conditions. The production of lignocellulolytic enzymes was found to be maximum at the loading of 10%(w/v) agro-residues. The enzyme secretion was enhanced by two-fold at 2?mM CaCO_3, optimum pH 7, and temperature 40°. The Field Emission Gun-Scanning Electron Microscope (FEG-SEM) results have shown the degradative effect of lignocellulases; cellulase, xylanase, mannanase, pectinase, and laccase on corn husk with 3.55?U/ml, 79.22?U/ml, 12.43?U/ml, 64.66?U/ml, and 21.12?U/ml of activity, respectively. The hydrolyzed corn husk found to be good adsorbent for polyphenols released during hydrolysis of corn husk providing suitable conditions for stability of lignocellulases. Sphingobacterium sp. ksn is proved to be a promising candidate for lignocellulolytic enzymes in view of demand for enzymes in the biofuel industry.     

Compatibility testing and enhancing the pulp bleaching process by hydrolases of the newly isolated thermophilic Isoptericola variabilis strain UD-6

Abstract

In the present study, Isoptericola variabilis strain UD-6 isolated from alkaline hot spring of Unapdev, Maharashtra, India was assessed for its biobleaching activity by hydrolytic enzymes on rice straw pulp. Results of primary and secondary screening manifested that it was a multi-enzyme producer, competent to produce amylase, cellulase, mannanase, pectinase, and xylanase at 9.73, 4.11, 6.26, 8.42, and 6.61?IU?ml^?1 in fermentation conditions, respectively. Maximum activity of all enzymes was gained at thermal temperature (50–55?°C), alkaline condition (pH 8–9), under 5?mM KCl and 5?mM NaCl salt concentration. In compatibility testing, activities of all enzymes were spectacularly reduced when they utilized with chemicals of pulp bleaching. Results of rice straw pulp bleaching was effectual when pulp was initially bleached with mannanase, pectinase, and xylanase enzymes (Es) for 90?min and then with diluted chemicals (DC) for further 90?min instead of their separate use. Treatment of rice straw pulp with Es?+?DC, enhanced the release of reducing sugars, hydrophobic compounds, and phenolic compounds, whereas Kappa number was reduced. Overall, the results of the present study indicated that pre-bleaching of pulp with hydrolytic enzymes obtained from I. variabilis strain UD-6 helps to minimize chemicals used in the bleaching process and make it more sustainable for pulp and paper industries as well as for the environment.     

Improved xylanase production using apple pomace waste by Aspergillus niger in koji fermentation

Xylanase production by Aspergillus niger NRRL‐567 in solid‐state fermentation (koji fermentation) was optimized using 2⁴ factorial design and response surface methodology. The evaluated variables were the initial moisture level and concentration of inducers [veratryl alcohol (VA), copper sulphate (CS), and lactose (LAC)], leading to the response of xylanase production. Initial moisture level and LAC were found to be the most significant variable for xylanase production (p<0.05). The highest xylanase production was observed with 3578.8 ± 65.3 IU/gds (gram dry substrate) under optimal conditions using initial moisture of 85% (v/w), pH 5.0 and inducers VA (2 mM/kg), LAC 2% (w/w), and CS (1.5 mM/kg) after 48 h of incubation time. Higher xylanase activity of 3952 ± 78.3 IU/gds was attained during scale‐up of the process in solid‐state tray fermentation under optimum conditions after 72 h of incubation time. The present study demonstrates that A. niger NRRL‐567 can efficiently be used to achieve xylanase production with an economical and environmental benefit in solid‐state tray fermentation. The developed process can be used to develop an effective process for commercially feasible bioproduction of xylanases for speciality applications, such as conversion of lignocellulosic biomass to biofuels and other value‐added products.     

Optimization and characterization of extracellular cellulase produced by Bacillus pumilus MGB05 isolated from midgut of muga silkworm (Antheraea assamensis Helfer)

Mature larvae of Antheraea assamensis were collected from different locations of Assam to isolate the cellulolytic gut microflora. Altogether sixty cellulase degrading bacteria were isolated on agar plates containing microcrystalline cellulose as the sole carbon source. Among them, ten isolates showed hydrolyzing zone on agar plates containing carboxy methyl cellulose (CMC) after staining with Congo-red. Isolate MGB05 exhibited the highest CMCase activity (0.262?U/mL) at 72?h of incubation under submerged condition. FPase and β-glucosidase activity were 0.012?U/mL and 3.71?U/mL respectively. It showed maximum FPase (0.022?U/mL) activity on the 3rd day of incubation in the media containing wheat bran as a carbon source. β-glucosidase production was also found to be highest with wheat bran (20.03?U/mL) at 48?h of incubation. The optimum pH and temperature of FPase activity of MGB05 were found at 6.0 and 50?°C respectively while for β-glucosidase activity, it was maximum at pH?6.0 under 50?°C. In addition, metal ion Mg⁺⁺ and Ca⁺⁺ enhanced FPase activity up to 110.92% (0.026?U/mL) and 105.31% (0.025?U/mL) respectively. In-vitro antimicrobial bioassay of the most potent cellulolytic bacteria (MGB05) also showed high antimicrobial activity against Escherichia coli (2.9?cm) and Pseudomonas aeruginosa (3.0?cm). The isolate MGB05 has been identified based on 16S rDNA homology as Bacillus pumilus MGB05 with accession KP298708.2. Results encompass the prospective beneficial role of gut-microflora on digestion and disease resistance, which might be a potential probiotic component to enhance silk productivity.     

Optimization of novel and greener approach for the coproduction of uricase and alkaline protease in Bacillus licheniformis by Box–Behnken model

This study explores a novel concept of coproduction of uricase and alkaline protease by Bacillus licheniformis using single substrate in single step. Seven local bacterial strains were screened for uricase production, amongst which B. licheniformis is found to produce highest uricase along with alkaline protease. Optimization of various factors influencing maximum enzyme coproduction by B. licheniformis is performed. Maximum enzyme productivity of 0.386?U/mL uricase and 0.507?U/mL alkaline protease is obtained at 8?hr of incubation period, 1% (v/v) inoculum, and at 0.2% (w/v) uric acid when the organism is cultivated at 25°C, 180?rpm, in a media containing xylose as a carbon source, urea as a nitrogen source, and initial pH of 9.5. The statistical experimental design method of Box–Behnken was further applied to obtain optimal concentration of significant parameters such as pH (9.5), uric acid concentration (0.1%), and urea concentration (0.05%). The maximum uricase and alkaline protease production by B. licheniformis using Box–Behnken design was 0.616 and 0.582?U/mL, respectively, with 1.6- and 1.13-fold increase as compared to one factor at a time optimized media. This study will be useful to develop an economic, commercially viable, and scalable process for simultaneous production of uricase and protease enzymes.     

Production and biochemical characterization of a novel cellulase-poor alkali-thermo-tolerant xylanase from <Emphasis Type="Italic">Coprinellus disseminatus</Emphasis> SW-1 NTCC 1165

Fungi producing xylanases are plentiful but alkali-thermo-tolerant fungi producing cellulase-poor xylanase are rare. Out of 12 fungal strains isolated from various sources, Coprinellus disseminatus SW-1 NTCC 1165 yielded the highest xylanase activity (362.1 IU/ml) with minimal cellulase contamination (0.64 IU/ml). The solid state fermentation was more effective yielding 88.59% higher xylanase activity than that of submerged fermentation. An incubation period of 7 days at 37°C and pH 6.4 accelerated the xylanase production up to the maximum level. Among various inexpensive agro-residues used as carbon source, wheat bran induced the maximum xylanase titres (469.45 IU/ml) while soya bean meal was the best nitrogen source (478.5 IU/ml). A solid substrate to moisture content ratio of 1:3 was suitable for xylanase production while xylanase titre was repressed with the addition of glucose and lactose. The xylanase and laccase activities under optimized conditions were 499.60 and 25.5 IU/ml, respectively along with negligible cellulase contamination (0.86 IU/ml). Biochemical characterization revealed that optimal xylanase activity was observed at pH 6.4 and temperature 55°C and xylanase is active up to pH 9 (40.33 IU/ml) and temperature 85°C (48.81 IU/ml). SDS–PAGE and zymogram analysis indicated that molecular weight of alkali-thermo-tolerant xylanase produced by C. disseminatus SW-1 NTCC 1165 was 43 kDa.     

Algal biomass: A sustainable,economical and renewable approach for microbial production of pectinolytic enzymes using submerged and solid state fermentation techniques

In the past decade, algal waste has been used as useful natural resource for production of enormous range of products that have wide economical and commercial importance. Pectinases are group of enzymes that have wide commercial applications. Hence, current study was designed to utilize algal biomass for the production of pectinases using submerged (SmF) and solid state fermentation (SSF) techniques. Different algal sources including brown (Dictyopteris polypodioides, Sargassum wightii and Dictyopteris divaricata) and green algae (Ulva lactuca and Codium tomentosum) were used and U. lactuca was found to be the most suitable substrate. Several bacterial and fungal strains were screened and among them Bacillus licheniformis KIBGE-IB4 was selected based on maximum pectinase production. SmF and SSF were studied utilizing U. lactuca as a substrate and results revealed that enzyme production was favoured by SmF (2457?±?3.31?U?mg^?1) as compared to SSF (1432?±?1.46?U?mg^?1). Parametric optimization of pectinase production indicated that B. licheniformis KIBGE-IB4 requires 10.0?g L^–1 U. lactuca as a biomass in the medium with a pH 7.0 when incubated at 37?°C for 24 hours. Likewise, production of pectinase using algal resource was also compared with that of the conventional agricultural biomass and it was observed that when U. lactuca was used, the selected bacterial isolate produced a higher yield of enzyme than sugarcane bagasse and rice husk. Hence, it is anticipated that algal biomass can be efficiently utilized as an environmental friendly bioresource for the production of industrially important hydrolytic enzymes.     

Streptomyces thermocerradoensis I3 secretes a novel bifunctional xylanase/endoglucanase under solid-state fermentation

Lignocellulosic wastes can be potentially converted into several bioproducts such as glucose, xylo-oligosaccharides, and bioethanol. Certain processes, such as enzymatic hydrolysis, are generally needed to convert biomass into bioproducts. The present study investigated the production of xylanases and cellulases by Streptomyces thermocerradoensis I3 under solid-state fermentation (SSF), using wheat bran as a low-cost medium. The activities of xylanase and carboxymethyl cellulase (CMCase) were evaluated until 96 hr of incubation. The highest enzyme activity was observed after 72 hr of incubation. The crude enzyme extract was sequentially filtered, first using a 50 kDa filter, followed by a 30 kDa filter. Fraction 3 (F3) exhibited activities of both xylanase and CMCase. Xylanase and CMCase showed optimum activity at 70°C and pH 6.0 and 55°C and pH 6.0, respectively. The zymogram analysis showed a single activity band with a molecular mass of approximately 17 kDa. These findings provide strong evidence that the enzyme is a bifunctional xylanase/endoglucanase. This enzyme improved the saccharification of sugarcane bagasse by 1.76 times that of commercial cellulase. This enzyme has potential applications in various biotechnological procedures.     

Influence of bioprocess variables on the production of extracellular chitinase under submerged fermentation by Streptomyces pratensis strain KLSL55

Chitinases are the enzymes which are capable of hydrolyzing chitin to its monomer N-acetyl glucosamine (GlcNac). Present study emphasizes on the impact of critical process variables on the production of chitinase from Streptomyces pratensis strain KLSL55. Initially the isolate was noticed to produce 84.67?IU chitinase in basal production medium. At optimization of bioprocess variables, the physical parameters pH of 8.00, 40?°C of incubation temperature, agitation speed of 160?rpm and 1.25?mL of spore suspension were found optimum for improved production of chitinase. Further, formulated production medium with 1.5% colloidal chitin, 1.25% fructose greatly influenced the chitinase production. At all described optimum conditions with formulated production media, a total of 14.30-fold increment was achieved in the chitinase production with final activity of 1210.67?IU when compared to the initial fermentation conditions in basal production medium.     

Development of mutants of <Emphasis Type="Italic">Melanocarpus albomyces</Emphasis> for hyperproduction of xylanase

The wild type filamentous fungus, Melanocarpus albomyces, produces many commercially valuable enzymes, including Xylanases and Xylan-debranching enzymes with low activity. In this paper, we report for the first time the development of M. albomyces mutants from vegetative spores. Profuse sporulation of M. albomyces was induced on Potato Carrot Agar medium. These spores, when subjected to chemical mutation, led to the isolation of the hyper-xylanase producing mutant, viz, M. albomyces IITD3A. Various parameters including number of spores, nitrogen source and C/N ratio of the medium were optimized for production of xylanase by the mutant in a shake flask culture. Under controlled pH at 7.8, the mutant produced highly active xylanase with 415 IU/mL after 36 h of growth on soluble alkaline lignocellulosic extract in a 14-L fermentor. The overall productivity of xylanase was 8-fold higher than the wild type culture with11, 530 IU/L/h. The enzyme can be easily stored at 37°C for 50 days by addition of a small amount of the preservative — thiomersal. Also, for long term storage, a lyophilized powder form of the enzyme can be used which retained 100% of its activity for > 50 days. When assayed at pH 7.5 and temperature 55°C, the xylanase retained 100% of its original activity, and also at pH 9.0, it retained > 50% of its activity for 2 h, which is promising for its application in the pulp and paper industry.     

Comprehensive studies on optimization of cellulase and xylanase production by a local indigenous fungus strain via solid state fermentation using oil palm frond as substrate

The high cost of cellulases remains the most significant barrier to the economical production of bio-ethanol from lignocellulosic biomass. The goal of this study was to optimize cellulases and xylanase production by a local indigenous fungus strain (Aspergillus niger DWA8) using agricultural waste (oil palm frond [OPF]) as substrate. The enzyme production profile before optimization indicated that the highest carboxymethyl cellulose (CMCase), filter paper (FPase), and xylanase activities of 1.06 U/g, 2.55 U/g, and 2.93 U/g were obtained on day 5, day 4, and day 5 of fermentation, respectively. Response surface methodology was used to study the effects of several key process parameters in order to optimize cellulase production. Of the five physical and two chemical factors tested, only moisture content of 75% (w/w) and substrate amount of 2.5 g had statistically significant effect on enzymes production. Under optimized conditions of 2.5 g of substrate, 75% (w/w) moisture content, initial medium of pH 4.5, 1 × 10⁶ spores/mL of inoculum, and incubation at ambient temperature (±30°C) without additional carbon and nitrogen, the highest CMCase, FPase, and xylanase activities obtained were 2.38 U/g, 2.47 U/g, and 5.23 U/g, respectively. Thus, the optimization process increased CMCase and xylanase production by 124.5 and 78.5%, respectively. Moreover, A. niger DWA8 produced reasonably good cellulase and xylanase titers using OPF as the substrate when compared with previous researcher finding. The enzymes produced by this process could be further use to hydrolyze biomass to generate reducing sugars, which are the feedstock for bioethanol production.     

Carboxymethyl cellulase production optimization from Glutamicibacter arilaitensis strain ALA4 and its application in lignocellulosic waste biomass saccharification

Abstract

In this context, carboxymethyl cellulase (CMCase) production from Glutamicibacter arilaitensis strain ALA4 was initially optimized by one factor at a time (OFAT) method using goat dung as proficient feedstock. Two-level full factorial design (2⁵ factorial matrix) using first-order polynomial model revealed the significant (p?<?0.05) influence of pH, moisture, and peptone on CMCase activity. Central composite design at N?=?20 was further taken into account using a second-order polynomial equation, and thereby liberated maximum CMCase activity of 4925.56?±?31.61?U/g in the goat dung medium of pH 8.0 and 100% moisture containing 1% (w/w) peptone, which was approximately two fold increment with respect to OFAT method. Furthermore, the partially purified CMCase exhibited stability not only at high pH and temperature but also in the presence of varied metal ions, organic solvents, surfactants, and inhibitors with pronounced residual activities. The enzymatic hydrolysis using partially purified CMCase depicted the maximum liberation of fermentable sugars from alkali pretreated lignocellulosic wastes biomass in the order of paddy straw (13.8?±?0.15?mg/g)?>?pomegranate peel (9.1?±?0.18?mg/g)?>?sweet lime peel (8.37?±?0.16?mg/g), with saccharification efficiency of 62.1?±?0.8, 40.95?±?0.4, and 37.66?±?0.4%, respectively after 72?hr of treatment.