Characterization of enzymatic saccharification for acid-pretreated lignocellulosic materials with different lignin composition

The enzymatic saccharification of three different feedstocks, rice straw, bagasse and silvergrass, which had been pretreated with different dilute acid concentrations, was studied to verify how enzymatic saccharification was affected by the lignin composition of the raw materials. There was a quantitatively inverse correlation between lignin content and enzymatic digestibility after pretreatment with 1%, 2% and 4% sulfuric acid. The lignin accounted for about 18.8–21.8% of pretreated rice straw, which was less than the 23.1–26.5% of pretreated bagasse and the 21.5–24.1% of pretreated silvergrass. The maximum glucose yield achieved, under an enzyme loading 6.5 FPU g^?1 DM for 72 h, was close to 0.8 g glucose/g glucan from the enzymatic hydrolysis of the pretreated rice straw; this was twice that from bagasse and silvergrass. A decrease in initial rate of glucose production was observed in all cases when the raw materials underwent enzymatic saccharification with 4% sulfuric acid pretreatment. It is suggested that the higher acid concentration led to an inhibition of β-glucosidase activity. Fourier transform infrared (FTIR) spectroscopy further indicated the chemical properties of the rice straw and silvergrass become more hydrophilic after pretreatment using 2% of sulfuric acid, but the pretreated bagasse tended to become more hydrophobic. The hydrophilic nature of the pretreated solid residues may increase the inhibitive effects of lignin on the cellulase and this could become very important for raw materials such as silvergrass that contain more lignin.     

Isolation of xylose isomerases by sequence- and function-based screening from a soil metagenomic library

Background

The recent development of improved enzymes and pentose-using yeast for cellulosic ethanol processes calls for new attention to the lignocellulose pretreatment step. This study assessed the influence of pretreatment pH, temperature, and time, and their interactions on the enzymatic glucose and xylose yields from mildly pretreated wheat straw in multivariate experimental designs of acid and alkaline pretreatments.

Results

The pretreatment pH was the most significant factor affecting both the enzymatic glucose and xylose yields after mild thermal pretreatments at maximum 140°C for 10 min. The maximal enzymatic glucose and xylose yields from the solid, pretreated wheat straw fraction were obtained after pretreatments at the most extreme pH values (pH 1 or pH 13) at the maximum pretreatment temperature of 140°C. Surface response models revealed significantly correlating interactions of the pretreatment pH and temperature on the enzymatic liberation of both glucose and xylose from pretreated, solid wheat straw. The influence of temperature was most pronounced with the acidic pretreatments, but the highest enzymatic monosaccharide yields were obtained after alkaline pretreatments. Alkaline pretreatments also solubilized most of the lignin.

Conclusions

Pretreatment pH exerted significant effects and factor interactions on the enzymatic glucose and xylose releases. Quite extreme pH values were necessary with mild thermal pretreatment strategies (T ≤ 140°C, time ≤ 10 min). Alkaline pretreatments generally induced higher enzymatic glucose and xylose release and did so at lower pretreatment temperatures than required with acidic pretreatments.     

Utilization of agro-industrial waste for xylanase production by Aspergillus foetidus MTCC 4898 under solid state fermentation and its application in saccharification

Xylanase production by Aspergillus foetidus MTCC 4898 was carried out under solid state fermentation using wheat bran and anaerobically treated distillery spent wash. Response surface methodology involving Box–Behnken design was employed for optimizing xylanase production. The interactions among various fermentation parameters viz. moisture to substrate ratio, inoculum size, initial pH, effluent concentration and incubation time were investigated and modeled. The predicted xylanase activity under optimized parameters was 8200–8400 U/g and validated xylanase activity was 8450 U/g with very poor cellulase activity. Crude xylanase was used for enzymatic saccharification of agroresidues like wheat straw, rice straw and corncobs. Dilute NaOH and ammonia pretreatments were found to be beneficial for the efficient enzymatic hydrolysis of all the three substrates. Dilute NaOH pretreated wheat straw, rice straw and corncobs yielded 4, 4.2, 4.6 g/l reducing sugars, respectively whereas ammonia treated wheat straw, rice straw and corncobs yielded 4.9, 4.7, 4.6 g/l reducing sugars, respectively. The hydrolyzates were analysed by HPTLC. Xylose was found to be the major end product with traces of glucose in the enzymatic hydrolyzates of all the substrates.     

Novel Penicillium cellulases for total hydrolysis of lignocellulosics

The (hemi)cellulolytic systems of two novel lignocellulolytic Penicillium strains (Penicillium pulvillorum TUB F-2220 and P. cf. simplicissimum TUB F-2378) have been studied. The cultures of the Penicillium strains were characterized by high cellulase and β-glucosidase as well moderate xylanase activities compared to the Trichoderma reesei reference strains QM 6a and RUTC30 (volumetric or per secreted protein, respectively). Comparison of the novel Penicillium and T. reesei secreted enzyme mixtures in the hydrolysis of (ligno)cellulose substrates showed that the F-2220 enzyme mixture gave higher yields in the hydrolysis of crystalline cellulose (Avicel) and similar yields in hydrolysis of pre-treated spruce and wheat straw than enzyme mixture secreted by the T. reesei reference strain. The sensitivity of the Penicillium cellulase complexes to softwood (spruce) and grass (wheat straw) lignins was lignin and temperature dependent: inhibition of cellulose hydrolysis in the presence of wheat straw lignin was minor at 35 °C while at 45 °C by spruce lignin a clear inhibition was observed. The two main proteins in the F-2220 (hemi)cellulase complex were partially purified and identified by peptide sequence similarity as glycosyl hydrolases (cellobiohydrolases) of families 7 and 6. Adsorption of the GH7 enzyme PpCBH1 on cellulose and lignins was studied showing that the lignin adsorption of the enzyme is temperature and pH dependent. The ppcbh1 coding sequence was obtained using PCR cloning and the translated amino acid sequence of PpCBH1 showed up to 82% amino acid sequence identity to known Penicillium cellobiohydrolases.     

Enzyme adsorption on SO2 catalyzed steam-pretreated wheat and spruce material

Lignocellulose is widely recognized as a sustainable substrate for biofuels production, and the enzymatic hydrolysis is regarded as a critical step for the development of an effective process for the conversion of cellulose into ethanol. One key factor affecting the overall conversion rate is the adsorption capacity of the cellulase enzymes to the surface of the insoluble substrate. Pretreatment has a strong impact on hydrolysis, which could be related to both chemical changes and morphological changes of the material. In the current work, the accessibility of four differently pretreated wheat straw substrates, two differently pretreated spruce materials, and Avicel cellulose was investigated. Adsorption isotherms (at 4 °C and 30 °C) for a cellulase preparation were obtained, and the rates of hydrolysis were determined for the different materials. Furthermore, the surface area and pore size distribution of the various materials were measured and compared to adsorption and hydrolysis properties, and the structures of the pretreated materials were examined using scanning electron microscopy (SEM).The results demonstrated a positive correlation between enzyme adsorption and the substrate specific surface area within each feedstock. Overall, the amount of enzyme adsorbed was higher for pretreated spruce than for the pretreated wheat straw, but this was not accompanied by a higher initial rate of hydrolysis for spruce. Also, the difference in the measured endoglucanase adsorption and overall FPU adsorption suggests that a larger fraction of the enzyme adsorbed on spruce was unproductive binding. The SEM analysis of the material illustrated the structural effects of pretreatment harshness on the materials, and suggested that increased porosity explains the higher rate of hydrolysis of more severely pretreated biomass.     

Two-step acid and alkaline ethanolysis/alkaline peroxide fractionation of sugarcane bagasse and rice straw for production of polylactic acid precursor

Sugarcane bagasse and rice straw were subjected to acid and alkaline ethanolysis and sequential enzymatic hydrolysis to produce glucose for lactic acid production. Influence of physico-chemical treatments using ultrasonic bath and ultrasonic probe was studied compared with mechanical stirring. The results showed that the highest glucose yield with least contamination of xylose was obtained from acid ethanolysis fractionation (5 N H₂SO₄ + 50%, v/v ethanol) when stirred at 90 °C for 4 h. Alkaline ethanolysis accomplished high amount of both glucose and xylose released, however it was not favorable substrate for homofermentative lactic acid bacteria. In order to enhance enzymatic hydrolysis of acid ethanolysis fractionated samples, lignin was subsequently removed by the second step alkaline/peroxide delignification. The maximum lactic acid was obtained at 23.6 ± 0.2 g/L from Lactobacillus casei fermentation after 72 h when hydrolysate from two-step acid hydrolysis and alkaline/peroxide fractionated sugarcane bagasse containing 24.6 g/L initial glucose concentration was used as substrate.     

Enhanced saccharification of wheat straw with the application of ultrasonic-assisted quaternary ammonium hydroxide pretreatment

Lignocelluloses featuring complicated structure and poor degradability usually require pretreatment before its utilization. In this study, an ultrasonic-assisted pretreatment by using quaternary ammonium hydroxide was introduced to enhance biodegradability of lignocellulosic biomass. The synergistic chemical and mechanical pretreatment were supposed to be responsible for both external surface destruction and internal structure disruption of lignocelluloses. High-efficient lignin removal accompanied with obvious structural (crystallinity) transformation was achieved in the pretreated straws. Process analysis indicated that factors of time, temperature, concentration of solvent, and ultrasound power intensity turned out to be significant for pretreatment, and a 4-fold increased saccharification yield of around 92.4% as compared to untreated straw was obtained from the wheat straw pretreated by 15% solvent at 50 °C for 0.5 h in power intensity 344 W/cm². All results suggest that the combined chemical and mechanical treatment can significantly improve the bio-accessibility of lignocelluloses, leading to the enhanced utilization efficiency.     

Enhanced ethanol and chitosan production from wheat straw by Mucor indicus with minimal nutrient consumption

Recently, Mucor indicus was introduced as a promising ethanol producing microorganism for fermentation of lignocellulosic hydrolysates, showing a number of advantages over Saccharomyces cerevisiae. However, high nutrient requirement is the main drawback of the fungus in efficient ethanol production from lignocelluloses. In this study, application of fungal extract as a potential nutrient source replacing all required nutrients in fermentation of wheat straw by M. indicus was investigated. Wheat straw was pretreated with N-methylmorpholine-N-oxide (NMMO) at 120 °C for 1–5 h prior to enzymatic hydrolysis. Hydrolysis yield was improved at least by 6-fold for 3 h pretreated straw compared with that of untreated one. A fungal extract was produced by autolysis of M. indicus biomass, an unavoidable byproduct of fermentation. Maximum free amino nitrogen (2.04 g/L), phosphorus (1.50 g/L), and total nitrogen (4.47 g/L) as well as potassium, magnesium, and calcium in the fungal extract were obtained by autolysis of the biomass at 50 °C and pH 5.0. The fungal extract as a nutrient-rich supplement substituted yeast extract and all other required minerals in fermentation and enhanced the ethanol yield up to 92.1% of the theoretical yield. Besides, appreciate amounts of chitosan were produced as another valuable product of the autolysis.     

Effect of ozonolysis pretreatment on enzymatic digestibility of wheat and rye straw

Wheat and rye straws were pretreated with ozone to increase the enzymatic hydrolysis extent of potentially fermentable sugars. Through a 2(5-1) factorial design, this work studies the influence of five operating parameters (moisture content, particle size, ozone concentration, type of biomass and air/ozone flow rate) on ozonization pretreatment of straw in a fixed bed reactor under room conditions. The acid insoluble lignin content of the biomass was reduced in all experiments involving hemicellulose degradation. Near negligible losses of cellulose were observed. Enzymatic hydrolysis yields of up to 88.6% and 57% were obtained compared to 29% and 16% in non-ozonated wheat and rye straw respectively. Moisture content and type of biomass showed the most significant effects on ozonolysis. Additionally, ozonolysis experiments in basic medium with sodium hydroxide evidenced a reduction in solubilization and/or degradation of lignin and reliable cellulose and hemicellulose degradation.     

Optimization of organic acid pretreatment of wheat straw

The objective of this study was to determine the effectiveness of different organic acids (maleic, succinic, and oxalic acid) on enzymatic hydrolysis and fermentation yields of wheat straw. It was also aimed to optimize the process conditions (temperature, acid concentration, and pretreatment time) by using response surface methodology (RSM). In line with this objective, the wheat straw samples were pretreated at three different temperatures (170, 190, and 210°C), acid concentrations (1%, 3%, and 5%) and pretreatment time (10, 20, and 30 min). The findings show that at extreme pretreatment conditions, xylose was solubilized in liquid phase, causing an increase in cellulose and lignin content of biomass. Enzymatic hydrolysis experiments revealed that maleic and oxalic acids were quite effective at achieving high sugar yields (>90%) from wheat straw. In contrast, the highest sugar yields were 50–60%, when the samples were pretreated with succinic acid, indicating that succinic acid was not as effective. The optimum process conditions for maleic acid were, 210°C, 1.08% acid concentration, and 19.8 min; for succinic acid 210°C, 5% acid concentration, and 30 min; for oxalic acid 210°C, 3.6% acid concentration, and 16.3 min. The ethanol yields obtained at optimum conditions were 80, 79, and 59% for maleic, oxalic and succinic acid, respectively. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1487–1493, 2016     

Production of a cellulolytic enzyme system in mixed-culture solid-state fermentation of soybean hulls supplemented with wheat bran

Solid-state fermentation of soybean hulls supplemented with wheat bran using a co-culture of Trichoderma reesei and Aspergillus oryzae was performed. Three parameters — initial moisture content, incubation temperature, and initial pH — were optimized in culture flasks using response surface methodology. Parameter optimization was carried out with respect to filter paper activity and β-glucosidase activity in the culture. Temperature of 30 °C, pH of 5, and moisture content of 70% were found to be optimum. Optimized parameters were used for laboratory scale-up in static tray fermenters. The maximum filter paper activity of 10.7 FPU/g-ds and β-glucosidase of 10.7 IU/g-ds were obtained after 96-h incubation period in static tray fermenters in agreement with optimized activities at shake flask level. The results of static tray fermentation also highlighted the importance of mixed-culture fermentation. Both enzyme activities and volumetric productivities of enzyme produced were significantly higher in mixed-culture fermentation as compared to mono-culture static tray fermentation. Expression profile of cellulase system was characterized using SDS-PAGE and it indicated the presence of all the five major activities corresponding to β-glucosidase, CBH I, CBH II, EG I and xylanase. Enzyme broth was centrifuged and concentrated in an ultrafiltration cell. The concentrate was used for enzymatic saccharification of pretreated wheat straw and the potential of an indigenously developed enzyme concoction was reported in terms of saccharification efficiency. Pretreatment using both acid and alkali was carried out, and differences in sugar yield due to differences in composition as a result of pretreatment were reported. Results showed that alkali treatment generated higher sugars as compared to acid pretreatment. This was due to lignin removal and concentration of the cellulosic fraction. Present work showed that solid-state fermentation in a static tray bioreactor is a valuable technique for producing a system of enzymes with balanced activities that can efficiently saccharify lignocellulosic biomass like wheat straw.     

Using low temperature to balance enzymatic saccharification and furan formation during SPORL pretreatment of Douglas-fir

Comparing analytical results for Sulfite Pretreatment to Overcome the Recalcitrance of Lignocelluloses (SPORL) of Douglas-fir (Pseudotsuga menziesii) at two different temperatures shows that the apparent activation energy of sugar degradation is higher than that of hemicellulose hydrolysis, approximately 161 kJ/mole versus 100 kJ/mole. Thus, one can balance the production of degradation products against hemicellulose hydrolysis and therefore the enzymatic saccharification efficiency of the resultant substrate by changing pretreatment temperature and duration. Specifically, pretreatment at 165 °C for 75 min significantly reduced furan formation compared with the pretreatment at 180 °C for 30 min while maintaining the same pretreatment severity and therefore the same substrate enzymatic digestibility (SED). Obtaining high SED with Douglas-fir is also limited by lignin content. Fortunately, the bisulfite in SPORL provides delignification activity. By combining kinetic models for hemicelluloses hydrolysis, sugar degradation, and delignification, the performance of pretreatment can be optimized with respect to temperature, duration, acid, and bisulfite loading. The kinetic approach taken in this study is effective to design viable low temperature pretreatment processes for effective bioconversion of lignocelluloses.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by alkali–peracetic acid pretreatment

The enzymatic digestibility of sugarcane bagasse was greatly increased by alkali (NaOH)–peracetic acid (PAA) pretreatment under mild conditions. The effects of several factors affecting the pretreatment were investigated. It was found that when bagasse was pre-pretreated by 10% (based on initial dry materials) NaOH with 3:1 liquid-to-solid ratio at 90 °C for 1.5 h and further delignified by 10% peracetic acid (based on initial dry materials) at 75 °C for 2.5 h, the yield of reducing sugars reached 92.04% by enzymatic hydrolysis for 120 h with cellulase loading of 15 FPU/g solid. Compared with acid and alkali pretreatment, alkali–PAA pretreatment could be conducted under milder conditions and was more effective for delignification with less carbohydrates being degraded in the pretreatment process. Alkaline stage played an important role for partial delignification, swelling fibers and subsequently reducing PAA loading. No loss of cellulase activity (FPA) was observed in the liquid phase for alkali–PAA pretreated bagasse after enzymatic hydrolysis for 120 h.     

Optimization of Ethanol Production From Microfluidized Wheat Straw by Response Surface Methodology

In this study, wheat straw was pretreated with a microfluidizer to improve its enzymatic hydrolysis and ethanol yields. The pretreatment was performed at various pressures (500, 1000, and 1500 bar) and solid loadings (1, 2, and 3%). The microfluidized biomass was then subjected to hydrolysis and simultaneous saccharification and co-fermentation (SSCF) experiments at different enzyme loadings (5, 10, and 15 FPU/g dry wheat straw) using a mutant yeast. The results indicated that the microfluidization method alters the structure of biomass and leads to a reduction in lignin content. The samples pretreated at 1% solid loading contained the minimum lignin concentration and provided the maximum sugar and ethanol yields. These results signified that the microfluidization method is more effective on biomass at low solid loadings. The process conditions were optimized for higher ethanol and sugar yields using response surface methodology (RSM). The optimum pressure and solid and enzyme loadings were found as 1500 bar, 1%, and 15 FPU/g dry wheat straw, respectively. The yields obtained at this condition were 82%, 94%, and 65% for glucose, xylose, and ethanol, respectively. High sugar yields implied that microfluidization is an effective pretreatment method for cellulosic ethanol production. On the other hand, low ethanol yield may indicate that the microorganism was sensitive to inhibitory compounds present in the fermentation medium.     

Dilute sulfuric acid cycle spray flow-through pretreatment of corn stover for enhancement of sugar recovery

A cycle spray flow-through reactor was designed and used to pretreat corn stover in dilute sulfuric acid medium. The dilute sulfuric acid cycle spray flow-through (DCF) process enhanced xylose sugar yields and cellulose digestibility while increasing the removal of lignin. Within the DCF system, the xylose sugar yields of 90–93% could be achieved for corn stover pretreated with 2% (w/v) dilute sulfuric acid at 95 °C during the optimal reaction time (90 min). The remaining solid residue exhibited enzymatic digestibility of 90–95% with cellulase loading of 60 FPU/g glucan that was due to the effective lignin removal (70–75%) in this process. Compared with flow-through and compress-hot water pretreatment process, the DCF method produces a higher sugar concentration and higher xylose monomer yield. The novel DCF process provides a feasible approach for lignocellulosic material pretreatment.     

High efficiency bioethanol production from barley straw using a continuous pretreatment reactor

We developed a new pretreatment process for producing high-efficiency bioethanol from a lignocellulosic biomass. Barley straw was pretreated with sodium hydroxide in a twin-screw extruder for continuous pretreatment. The biomass to ethanol ratio (BTER) for optimal pretreatment conditions was evaluated by response surface methodology. Simultaneous saccharification and fermentation (SSF) was conducted to investigate the BTER with 30 FPU/g cellulose of enzyme and 7% (v/v) yeast (Saccharomyces cerevisiae CHY 1011) using 10% (w/v) pretreated biomass under various pretreatment conditions. The maximum BTER was 73.00% under optimal pretreatment conditions (86.61 °C, 0.58 M, and 84.79 mL/min for temperature, sodium hydroxide concentration, and solution flow rate, respectively) and the experimental BTER was 70.01 ± 0.59%. SSF was performed to investigate the optimal enzyme and biomass dosage. As a result, maximum ethanol concentration and ethanol yield were 46.00 g/L and 77.36% at a loading pretreated biomass of 20% with 30 FPU/g cellulose of the enzyme dosage for barley straw to bioethanol. These results are a significant contribution to the production of bioethanol from barley straw.     

Organosolv pretreatment by crude glycerol from oleochemicals industry for enzymatic hydrolysis of wheat straw

In order to defray the cost of biodiesel production, the ensuing work was to further investigate utilization of the crude glycerol (CG) from oleochemicals industry in the atmospheric autocatalytic organosolv pretreatment (AAOP) to enhance enzymatic hydrolysis.

The AAOP–CG enabled wheat straw to achieve with reasonable enzymatic hydrolysis yields, reaching 75% for the wet substrate and 63% for the dried. Lipophilic compounds from the CG formed pitch deposition on the fiber, which was responsible for low delignification (30%) and also troublesome in practical operation. Pitch deposits itself had no significant role on enzymatic hydrolysis. A striking finding of the lignin recondensation and/or lignin–carbohydrate complex helped explain why dried pretreated wheat straw had a low enzymatic hydrolysis yield. The CG was suitable for the AAOP to enhance enzymatic hydrolysis of lignocellulosic biomass. But it was advisable to remove lipophilic compounds from crude glycerol before utilization.     

Enhanced ethanol production via fermentation of rice straw with hydrolysate-adapted Candida tropicalis ATCC 13803

Neutralized hydrolysate and pretreated rice straw obtained from a 2% (w/v) sulfuric acid pretreatment were mixed at 10% (w/v) and subjected to simultaneous saccharification and co-fermentation (SSCF), with cellulase, β-glucosidase, and Candida tropicalis cells at 15 FPU/g-ds, 15 IU/g-ds and 1 × 10⁹ cells/ml, respectively. A 36-h SSCF with adapted cells resulted in YP/S and ethanol volumetric productivity of 0.36 g/g and 0.57 g/l/h, respectively. In addition to ethanol, insignificant amounts of glycerol and xylitol were also produced. Adapted C. tropicalis cells produced nearly 1.6 times more ethanol than non-adapted cells. Ethanol yield (Yp/s), ethanol volumetric productivity and a xylitol concentration of 0.48 g/g, 0.33 g/l/h and 0.89 g/l, respectively, were produced from fermentation of remaining hydrolysate with adapted C. tropicalis cells. The 0.20 g/g ethanol yield and 77% production efficiency from SSCF of pretreated rice straw indicate scale-up potential for the process. This study demonstrated that C. tropicalis produced ethanol and xylitol from a mixed-sugar stream, although cell adaptation affected ethanol and xylitol yields. Scanning electron microscopy indicated agglomeration of cellulose microfibrils and globular deposition of lignin in acid-pretreated rice straw.     

Influence of wheat cultivars on straw quality and Pleurotus ostreatus cultivation

The main raw material for Pleurotus ostreatus (oyster mushroom) cultivation is wheat straw. Estimation of straw biodegradability from 15 different spring wheat cultivars under irrigation in South Africa was determined using linear discriminant analysis to discriminate or group the 15 cultivars by combining chemical analysis and in vitro enzymatic hydrolysis. Significant differences (P < 0.01) were found between ash, nitrogen, reducing sugars, anthrone reactive-carbohydrates, water-soluble dry matter, and oyster mushroom yields. The significance of these measurements was investigated and discussed.     

Laccase-Mediator Pretreatment of Wheat Straw Degrades Lignin and Improves Saccharification

Agricultural by-products such as wheat straw are attractive feedstocks for the production of second-generation bioethanol due to their high abundance. However, the presence of lignin in these lignocellulosic materials hinders the enzymatic hydrolysis of cellulose. The purposes of this work are to study the ability of a laccase-mediator system to remove lignin improving saccharification, as a pretreatment of wheat straw, and to analyze the chemical modifications produced in the remaining lignin moiety. Up to 48 % lignin removal from ground wheat straw was attained by pretreatment with Pycnoporus cinnabarinus laccase and 1-hydroxybenzotriazole (HBT) as mediator, followed by alkaline peroxide extraction. The lignin removal directly correlated with increases (～60 %) in glucose yields after enzymatic saccharification. The pretreatment using laccase alone (without mediator) removed up to 18 % of lignin from wheat straw. Substantial lignin removal (37 %) was also produced when the enzyme-mediator pretreatment was not combined with the alkaline peroxide extraction. Two-dimensional nuclear magnetic resonance (2D NMR) analysis of the whole pretreated wheat straw material swollen in dimethylsulfoxide-d ₆ revealed modifications of the lignin polymer, including the lower number of aliphatic side chains involved in main β-O-4′ and β-5′ inter-unit linkages per aromatic lignin unit. Simultaneously, the removal of p-hydroxyphenyl, guaiacyl, and syringyl lignin units and of p-coumaric and ferulic acids, as well as a moderate decrease of tricin units, was observed without a substantial change in the wood polysaccharide signals. Especially noteworthy was the formation of Cα-oxidized lignin units during the enzymatic treatment.