Organization of FtsZ Filaments in the Bacterial Division Ring Measured from Polarized Fluorescence Microscopy

Cytokinesis in bacteria is accomplished by a ring-shaped cell-division complex (the Z-ring). The primary component of the Z-ring is FtsZ, a filamentous tubulin homolog that serves as a scaffold for the recruitment of other cell-division-related proteins. FtsZ forms filaments and bundles. In the cell, it has been suggested that FtsZ filaments form the arcs of the ring and are aligned in the cell-circumferential direction. Using polarized fluorescence microscopy in live Escherichia coli cells, we measure the structural organization of FtsZ filaments in the Z-ring. The data suggest a disordered organization: a substantial portion of FtsZ filaments are aligned in the cell-axis direction. FtsZ organization in the Z-ring also appears to depend on the bacterial species. Taken together, the unique arrangement of FtsZ suggests novel unexplored mechanisms in bacterial cell division.     

The rapid onset of elasticity during the assembly of the bacterial cell-division protein FtsZ

FtsZ, a prokaryotic homolog of eukaryotic tubulin, is a major constituent of the bacterial Z-ring, which contracts the cell wall during cell division. Because the mechanical properties of FtsZ are unknown, its function in the maintenance and constriction of the Z-ring is not well understood. Here, quantitative rheometry shows that, at physiological concentrations, FtsZ filaments form, extremely rapidly, highly elastic networks within physiological time scales ( approximately minutes), much faster than other major dynamic cytoskeletal filaments, including microtubule, actin, and vimentin in eukaryotes. FtsZ networks display a relatively low viscosity and a high resilience against shear stresses, as well as an elasticity that depends weakly on concentration, G approximately C(0.57), a power-law dependence consistent with crosslinked flexible filaments. Calcium, whose intracellular concentration increases during bacterial division, further enhances the elasticity of FtsZ networks through filament bundling, an effect that occurs in the presence of GTP, not GDP. These studies suggest that FtsZ filaments have the toughness to provide strong mechanical support for the maintenance and circumferential constriction of the bacterial Z-ring.     

Crystal Structure and Site-directed Mutational Analysis Reveals Key Residues Involved in Escherichia coli ZapA Function

FtsZ is an essential cell division protein in Escherichia coli, and its localization, filamentation, and bundling at the mid-cell are required for Z-ring stability. Once assembled, the Z-ring recruits a series of proteins that comprise the bacterial divisome. Zaps (FtsZ-associated proteins) stabilize the Z-ring by increasing lateral interactions between individual filaments, bundling FtsZ to provide a scaffold for divisome assembly. The x-ray crystallographic structure of E. coli ZapA was determined, identifying key structural differences from the existing ZapA structure from Pseudomonas aeruginosa, including a charged α-helix on the globular domains of the ZapA tetramer. Key helix residues in E. coli ZapA were modified using site-directed mutagenesis. These ZapA variants significantly decreased FtsZ bundling in protein sedimentation assays when compared with WT ZapA proteins. Electron micrographs of ZapA-bundled FtsZ filaments showed the modified ZapA variants altered the number of FtsZ filaments per bundle. These in vitro results were corroborated in vivo by expressing the ZapA variants in an E. coli ΔzapA strain. In vivo, ZapA variants that altered FtsZ bundling showed an elongated phenotype, indicating improper cell division. Our findings highlight the importance of key ZapA residues that influence the extent of FtsZ bundling and that ultimately affect Z-ring formation in dividing cells.     

Polymerization and bundling kinetics of FtsZ filaments

FtsZ is a tubulin homolog essential for prokaryotic cell division. In living bacteria, FtsZ forms a ringlike structure (Z-ring) at the cell midpoint. Cell division coincides with a gradual contraction of the Z-ring, although the detailed molecular structure of the Z-ring is unknown. To reveal the structural properties of FtsZ, an understanding of FtsZ filament and bundle formation is needed. We develop a kinetic model that describes the polymerization and bundling mechanism of FtsZ filaments. The model reveals the energetics of the FtsZ filament formation and the bundling energy between filaments. A weak lateral interaction between filaments is predicted by the model. The model is able to fit the in vitro polymerization kinetics data of another researcher, and explains the cooperativity observed in FtsZ kinetics and the critical concentration in different buffer media. The developed model is also applicable for understanding the kinetics and energetics of other bundling biopolymer filaments.     

The crystal structure of ZapA and its modulation of FtsZ polymerisation

FtsZ is part of a mid-cell cytokinetic structure termed the Z-ring that recruits a hierarchy of fission related proteins early in the bacterial cell cycle. The widely conserved ZapA has been shown to interact with FtsZ, to drive its polymerisation and to promote FtsZ filament bundling thereby contributing to the spatio-temporal tuning of the Z-ring. Here, we show the crystal structure of ZapA (11.6 kDa) from Pseudomonas aeruginosa at 2.8 A resolution. The electron density reveals two dimers associating via an extensive C-terminal coiled-coil protrusion to form an elongated anti-parallel tetramer. In solution, ZapA exists in a dimer-tetramer equilibrium that is strongly correlated with concentration. An increase in concentration promotes formation of the higher oligomeric state. The dimer is postulated to be the predominant physiological species although the tetramer could become significant if, as FtsZ is integrated into the Z-ring and is cross-linked, the local concentration of the dimer becomes sufficiently high. We also show that ZapA binds FtsZ with an approximate 1:1 molar stoichiometry and that this interaction provokes dramatic FtsZ polymerisation and inter-filament association as well as yielding filaments, single or bundled, more stable and resistant to collapse. Whilst in vitro dynamics of FtsZ are well characterised, its in vivo arrangement within the ultra-structural architecture of the Z-ring is yet to be determined despite being fundamental to cell division. The ZapA dimer has single 2-fold symmetry whilst the bipolar tetramer displays triple 2-fold symmetry. Given the symmetry of these ZapA oligomers and the polar nature of FtsZ filaments, the structure of ZapA carries novel implications for the inherent architecture of the Z-ring in vivo.     

Essential cell division protein FtsZ assembles into one monomer-thick ribbons under conditions resembling the crowded intracellular environment

Experimental conditions that simulate the crowded bacterial cytoplasmic environment have been used to study the assembly of the essential cell division protein FtsZ from Escherichia coli. In solutions containing a suitable concentration of physiological osmolytes, macromolecular crowding promotes the GTP-dependent assembly of FtsZ into dynamic two-dimensional polymers that disassemble upon GTP depletion. Atomic force microscopy reveals that these FtsZ polymers adopt the shape of ribbons that are one subunit thick. When compared with the FtsZ filaments observed in vitro in the absence of crowding, the ribbons show a lag in the GTPase activity and a decrease in the GTPase rate and in the rate of GTP exchange within the polymer. We propose that, in the crowded bacterial cytoplasm under assembly-promoting conditions, the FtsZ filaments tend to align forming dynamic ribbon polymers. In vivo these ribbons would fit into the Z-ring even in the absence of other interactions. Therefore, the presence of mechanisms to prevent the spontaneous assembly of the Z-ring in non-dividing cells must be invoked.     

In Vivo Structure of the E. coli FtsZ-ring Revealed by Photoactivated Localization Microscopy (PALM)

The FtsZ protein, a tubulin-like GTPase, plays a pivotal role in prokaryotic cell division. In vivo it localizes to the midcell and assembles into a ring-like structure-the Z-ring. The Z-ring serves as an essential scaffold to recruit all other division proteins and generates contractile force for cytokinesis, but its supramolecular structure remains unknown. Electron microscopy (EM) has been unsuccessful in detecting the Z-ring due to the dense cytoplasm of bacterial cells, and conventional fluorescence light microscopy (FLM) has only provided images with limited spatial resolution (200–300 nm) due to the diffraction of light. Hence, given the small sizes of bacteria cells, identifying the in vivo structure of the Z-ring presents a substantial challenge. Here, we used photoactivated localization microscopy (PALM), a single molecule-based super-resolution imaging technique, to characterize the in vivo structure of the Z-ring in E. coli. We achieved a spatial resolution of ∼35 nm and discovered that in addition to the expected ring-like conformation, the Z-ring of E. coli adopts a novel compressed helical conformation with variable helical length and pitch. We measured the thickness of the Z-ring to be ∼110 nm and the packing density of FtsZ molecules inside the Z-ring to be greater than what is expected for a single-layered flat ribbon configuration. Our results strongly suggest that the Z-ring is composed of a loose bundle of FtsZ protofilaments that randomly overlap with each other in both longitudinal and radial directions of the cell. Our results provide significant insight into the spatial organization of the Z-ring and open the door for further investigations of structure-function relationships and cell cycle-dependent regulation of the Z-ring.     

Curcumin inhibits FtsZ assembly: an attractive mechanism for its antibacterial activity

The assembly and stability of FtsZ protofilaments have been shown to play critical roles in bacterial cytokinesis. Recent evidence suggests that FtsZ may be considered as an important antibacterial drug target. Curcumin, a dietary polyphenolic compound, has been shown to have a potent antibacterial activity against a number of pathogenic bacteria including Staphylococcus aureus, Staphylococcus epidermidis and Enterococcus. We found that curcumin induced filamentation in the Bacillus subtilis 168, suggesting that it inhibits bacterial cytokinesis. Further, curcumin strongly inhibited the formation of the cytokinetic Z-ring in B. subtilis 168 without detectably affecting the segregation and organization of the nucleoids. Since the assembly dynamics of FtsZ protofilaments plays a major role in the formation and functioning of the Z-ring, we analysed the effects of curcumin on the assembly of FtsZ protofilaments. Curcumin inhibited the assembly of FtsZ protofilaments and also increased the GTPase activity of FtsZ. Electron microscopic analysis showed that curcumin reduced the bundling of FtsZ protofilaments in vitro. Further, curcumin was found to bind to FtsZ in vitro with a dissociation constant of 7.3+/-1.8 microM and the agent also perturbed the secondary structure of FtsZ. The results indicate that the perturbation of the GTPase activity of FtsZ assembly is lethal to bacteria and suggest that curcumin inhibits bacterial cell proliferation by inhibiting the assembly dynamics of FtsZ in the Z-ring.     

FtsZ and bacterial cell division

In this review we describe proteins and supermolecular structures which take part in the division of bacterial cells. FtsZ, a eukaryotic tubulin homolog is a key cell division protein in most prokaryotes. FtsZ, as well as tubulin, is capable of binding and hydrolyzing GTP. The division of a bacterial cell begins with the forming of a so-called divisome. The basis of such a divisome is a contractile ring (Z ring) which encircles the cell about midcell. The Z-ring consists of a bundle of laterally bound protofilaments formed in result of FtsZ polymerization. Z-ring is rigidly bounded to the cytosolic side of the inner membrane with the participation of FtsA, ZipA, FtsW and many other divisome cell division proteins. The ring directs the process of cytokinesis transmitting constriction power to the membrane. The primary structures of the prokaryotic FtsZ family members significantly differ from eukaryotic tubulins except for the sites of GTP binding. There is a high degree of structural homology between these proteins in the region. FtsZ is one of the most conserved proteins in prokaryotes. However, ftsZ genes have not been found in several species of microorganisms with completely sequenced genomes. They include two species of mycoplasmas (Ureaplasma parvum and Mycoplasma mobile), Prostecobacter dejongeii, 10 species of chlamydia and 5 species of archaea. Consequently, these organisms divide without FtsZ participation. The genomes of U. parvum and M. mobile have many open reading frames which encode proteins with unknown functions. A comparison of the primary structures of these hypothetical proteins did not identify any known cell division proteins. We hypothesize that the process of cell division in these organisms should involve proteins similar to FtsZ in function and homologous to FtsZ or other cell division proteins in structure.     

Helical tubes of FtsZ from Methanococcus jannaschii

Bacterial cell division depends on the formation of a cytokinetic ring structure, the Z-ring. The bacterial tubulin homologue FtsZ is required for Z-ring formation. FtsZ assembles into various polymeric forms in vitro, indicating a structural role in the septum of bacteria. We have used recombinant FtsZ1 protein from M. jannaschii to produce helical tubes and sheets with high yield using the GTP analogue GMPCPP [guanylyl-(alpha,beta)-methylene-diphosphate]. The sheets appear identical to the previously reported Ca++-induced sheets of FtsZ from M. jannaschii that were shown to consist of 'thick'-filaments in which two protofilaments run in parallel. Tubes assembled either in Ca++ or in GMPCPP contain filaments whose dimensions indicate that they could be equivalent to the 'thick'-filaments in sheets. Some tubes are hollow but others are filled by additional protein density. Helical FtsZ tubes differ from eukaryotic microtubules in that the filaments curve around the filament axis with a pitch of approximately 430 A for Ca++-induced tubes or 590 - 620 A for GMPCPP. However, their assembly in vitro as well-ordered polymers over distances comparable to the inner circumference of a bacterium may indicate a role in vivo. Their size and stability make them suitable for use in motility assays.     

Negative-stain electron microscopy of inside-out FtsZ rings reconstituted on artificial membrane tubules show ribbons of protofilaments

FtsZ, the primary cytoskeletal element of the Z ring, which constricts to divide bacteria, assembles into short, one-stranded filaments in vitro. These must be further assembled to make the Z ring in bacteria. Conventional electron microscopy (EM) has failed to image the Z ring or resolve its substructure. Here we describe a procedure that enabled us to image reconstructed, inside-out FtsZ rings by negative-stain EM, revealing the arrangement of filaments. We took advantage of a unique lipid that spontaneously forms 500 nm diameter tubules in solution. We optimized conditions for Z-ring assembly with fluorescence light microscopy and then prepared specimens for negative-stain EM. Reconstituted FtsZ rings, encircling the tubules, were clearly resolved. The rings appeared as ribbons of filaments packed side by side with virtually no space between neighboring filaments. The rings were separated by variable expanses of empty tubule as seen by light microscopy or EM. The width varied considerably from one ring to another, but each ring maintained a constant width around its circumference. The inside-out FtsZ rings moved back and forth along the tubules and exchanged subunits with solution, similarly to Z rings reconstituted outside or inside tubular liposomes. FtsZ from Escherichia coli and Mycobacterium tuberculosis assembled rings of similar structure, suggesting a universal structure across bacterial species. Previous models for the Z ring in bacteria have favored a structure of widely scattered filaments that are not in contact. The ribbon structure that we discovered here for reconstituted inside-out FtsZ rings provides what to our knowledge is new evidence that the Z ring in bacteria may involve lateral association of protofilaments.     

FtsZ Polymerization Assays: Simple Protocols and Considerations

During bacterial cell division, the essential protein FtsZ assembles in the middle of the cell to form the so-called Z-ring. FtsZ polymerizes into long filaments in the presence of GTP in vitro, and polymerization is regulated by several accessory proteins. FtsZ polymerization has been extensively studied in vitro using basic methods including light scattering, sedimentation, GTP hydrolysis assays and electron microscopy. Buffer conditions influence both the polymerization properties of FtsZ, and the ability of FtsZ to interact with regulatory proteins. Here, we describe protocols for FtsZ polymerization studies and validate conditions and controls using Escherichia coli and Bacillus subtilis FtsZ as model proteins. A low speed sedimentation assay is introduced that allows the study of the interaction of FtsZ with proteins that bundle or tubulate FtsZ polymers. An improved GTPase assay protocol is described that allows testing of GTP hydrolysis over time using various conditions in a 96-well plate setup, with standardized incubation times that abolish variation in color development in the phosphate detection reaction. The preparation of samples for light scattering studies and electron microscopy is described. Several buffers are used to establish suitable buffer pH and salt concentration for FtsZ polymerization studies. A high concentration of KCl is the best for most of the experiments. Our methods provide a starting point for the in vitro characterization of FtsZ, not only from E. coli and B. subtilis but from any other bacterium. As such, the methods can be used for studies of the interaction of FtsZ with regulatory proteins or the testing of antibacterial drugs which may affect FtsZ polymerization.     

Chloroplast Division Protein ARC3 Regulates Chloroplast FtsZ-Ring Assembly and Positioning in Arabidopsis through Interaction with FtsZ2

Chloroplast division is initiated by assembly of a mid-chloroplast FtsZ (Z) ring comprising two cytoskeletal proteins, FtsZ1 and FtsZ2. The division-site regulators ACCUMULATION AND REPLICATION OF CHLOROPLASTS3 (ARC3), MinD1, and MinE1 restrict division to the mid-plastid, but their roles are poorly understood. Using genetic analyses in Arabidopsis thaliana, we show that ARC3 mediates division-site placement by inhibiting Z-ring assembly, and MinD1 and MinE1 function through ARC3. ftsZ1 null mutants exhibited some mid-plastid FtsZ2 rings and constrictions, whereas neither constrictions nor FtsZ1 rings were observed in mutants lacking FtsZ2, suggesting FtsZ2 is the primary determinant of Z-ring assembly in vivo. arc3 ftsZ1 double mutants exhibited multiple parallel but no mid-plastid FtsZ2 rings, resembling the Z-ring phenotype in arc3 single mutants and showing that ARC3 affects positioning of FtsZ2 rings as well as Z rings. ARC3 overexpression in the wild type and ftsZ1 inhibited Z-ring and FtsZ2-ring assembly, respectively. Consistent with its effects in vivo, ARC3 interacted with FtsZ2 in two-hybrid assays and inhibited FtsZ2 assembly in a heterologous system. Our studies are consistent with a model wherein ARC3 directly inhibits Z-ring assembly in vivo primarily through interaction with FtsZ2 in heteropolymers and suggest that ARC3 activity is spatially regulated by MinD1 and MinE1 to permit Z-ring assembly at the mid-plastid.     

New data on structures formed by the FtsZ protein during the cell division process in <Emphasis Type="Italic">Escherichia coli</Emphasis> obtained using the localization microscopy method

The FtsZ protein, a bacterial tubulin homolog, is one of the key proteins in bacterial cell division, forming a contractile Z-ring in the middle of the dividing cell. In the present study, immunofluorescence staining, in combination with the localization microscopy method, was used for visualization of the structures formed by unlabelled FtsZ in Escherrichia coli cells. The techniques employed allowed reconstruction of the multistep mechanism of formation of FtsZ structures during the cytokinesis process. New data were obtained confirming the hypothesis that FtsZ is a helixlike structure that constricts during the division, producing constriction between the daughter cells.     

FtsZ dynamics in bacterial division: What,how, and why?

Bacterial cell division is orchestrated by the divisome, a protein complex centered on the tubulin homolog FtsZ. FtsZ polymerizes into a dynamic ring that defines the division site, recruits downstream proteins, and directs peptidoglycan synthesis to drive constriction. Recent studies have documented treadmilling of FtsZ polymer clusters both in cells and in vitro. Emerging evidence suggests that FtsZ dynamics are regulated largely by intrinsic properties of FtsZ itself and by the membrane anchoring protein FtsA. Although FtsZ dynamics are broadly required for Z-ring assembly, their role(s) during constriction may vary among bacterial species. These recent advances set the stage for future studies to investigate how FtsZ dynamics are physically and/or functionally coupled to peptidoglycan metabolic enzymes to direct efficient division.     

Super-resolution Imaging of the Bacterial Division Machinery

Bacterial cell division requires the coordinated assembly of more than ten essential proteins at midcell^1,2. Central to this process is the formation of a ring-like suprastructure (Z-ring) by the FtsZ protein at the division plan^3,4. The Z-ring consists of multiple single-stranded FtsZ protofilaments, and understanding the arrangement of the protofilaments inside the Z-ring will provide insight into the mechanism of Z-ring assembly and its function as a force generator^5,6. This information has remained elusive due to current limitations in conventional fluorescence microscopy and electron microscopy. Conventional fluorescence microscopy is unable to provide a high-resolution image of the Z-ring due to the diffraction limit of light (~200 nm). Electron cryotomographic imaging has detected scattered FtsZ protofilaments in small C. crescentus cells⁷, but is difficult to apply to larger cells such as E. coli or B. subtilis. Here we describe the application of a super-resolution fluorescence microscopy method, Photoactivated Localization Microscopy (PALM), to quantitatively characterize the structural organization of the E. coli Z-ring⁸.PALM imaging offers both high spatial resolution (~35 nm) and specific labeling to enable unambiguous identification of target proteins. We labeled FtsZ with the photoactivatable fluorescent protein mEos2, which switches from green fluorescence (excitation = 488 nm) to red fluorescence (excitation = 561 nm) upon activation at 405 nm⁹. During a PALM experiment, single FtsZ-mEos2 molecules are stochastically activated and the corresponding centroid positions of the single molecules are determined with <20 nm precision. A super-resolution image of the Z-ring is then reconstructed by superimposing the centroid positions of all detected FtsZ-mEos2 molecules.Using this method, we found that the Z-ring has a fixed width of ~100 nm and is composed of a loose bundle of FtsZ protofilaments that overlap with each other in three dimensions. These data provide a springboard for further investigations of the cell cycle dependent changes of the Z-ring¹⁰ and can be applied to other proteins of interest.     

Cell division genes and proteins in bacterial cells

In this review, genes and proteins involved in cytokinesis and cell proliferation of cell-wall bacteria and mycoplasms are considered. We hope that this comparative analysis of genes and proteins of phylogenetically distant bacteria, including the minimal cells of mycoplasmas, can be useful for understanding the basic principles of prokaryotic cell division. The ftsZ gene was found among representatives of all bacterial groups. The recent data indicate that FtsZ protein plays the central role in the process of bacterial cell division. FtsZ protein was revealed in all Eubacterial groups (including mycoplasmas), in Archaebacteria and chloroplasts, All FtsZ proteins are able to form protofilaments as a result of polymerization in vitro and demonstrate GTF-ase activity. On the base of these properties and some similarities in amino acid sequences with tubulins, it has been suggested that FtsZ protein is an evolutionary ancestor of Eukaryotic tubulins. On the earliest stage of bacterial cytokinesis FtsZ protein assembles into a submembranous Z-ring which encircles bacterial cell in the predivisional site. Some other bacterial proteins take part in stabilization and contraction of the Z-ring, which is considered as a cytoskeleton-like bacterial structure.     

Totarol inhibits bacterial cytokinesis by perturbing the assembly dynamics of FtsZ

Totarol, a diterpenoid phenol, has been shown to inhibit the proliferation of several pathogenic Gram-positive bacteria including Mycobacterium tuberculosis. In this study, totarol was found to inhibit the proliferation of Bacillus subtilis cells with a minimum inhibitory concentration of 2 microM. It did not detectably perturb the membrane structure of B. subtilis; it strongly induced the filamentation in B. subtilis cells, suggesting that it inhibits bacterial cytokinesis. Totarol (1.5 microM) reduced the frequency of the Z-ring occurrence per micrometer of the bacterial cell length but did not affect the nucleoid frequency, suggesting that it blocks cytokinesis by inhibiting the formation of the Z-ring. The assembly dynamics of FtsZ is thought to play an important role in the formation and functioning of the Z-ring, a machine that engineers cytokinesis in bacteria. Since totarol was shown to inhibit the proliferation of M. tuberculosis, we examined the effects of totarol on the assembly dynamics of M. tuberculosis FtsZ (MtbFtsZ) in vitro. Totarol decreased the assembly of MtbFtsZ protofilaments and potently suppressed the GTPase activity of MtbFtsZ. It bound to MtbFtsZ with a dissociation constant of 11 +/- 2.3 microM. It increased the fluorescence intensity of the MtbFtsZ-1-anilinonaphthalene-8-sulfonic acid complex and inhibited the fluorescence intensity of N-(1-pyrene)maleimide-labeled MtbFtsZ, suggesting that totarol induces conformational changes in MtbFtsZ. The results indicated that totarol can perturb the assembly dynamics of FtsZ protofilaments in the Z-ring. Totarol exhibited extremely weak inhibitory effects on HeLa cell proliferation. It did not affect microtubule organization in HeLa cells. The results suggest that totarol inhibits bacterial proliferation by targeting FtsZ and it may be useful as a lead compound to develop an effective antitubercular drug.     

Mycobacterium tuberculosis cells growing in macrophages are filamentous and deficient in FtsZ rings

FtsZ, a bacterial homolog of tubulin, forms a structural element called the FtsZ ring (Z ring) at the predivisional midcell site and sets up a scaffold for the assembly of other cell division proteins. The genetic aspects of FtsZ-catalyzed cell division and its assembly dynamics in Mycobacterium tuberculosis are unknown. Here, with an M. tuberculosis strain containing FtsZ(TB) tagged with green fluorescent protein as the sole source of FtsZ, we examined FtsZ structures under various growth conditions. We found that midcell Z rings are present in approximately 11% of actively growing cells, suggesting that the low frequency of Z rings is reflective of their slow growth rate. Next, we showed that SRI-3072, a reported FtsZ(TB) inhibitor, disrupted Z-ring assembly and inhibited cell division and growth of M. tuberculosis. We also showed that M. tuberculosis cells grown in macrophages are filamentous and that only a small fraction had midcell Z rings. The majority of filamentous cells contained nonring, spiral-like FtsZ structures along their entire length. The levels of FtsZ in bacteria grown in macrophages or in broth were comparable, suggesting that Z-ring formation at midcell sites was compromised during intracellular growth. Our results suggest that the intraphagosomal milieu alters the expression of M. tuberculosis genes affecting Z-ring formation and thereby cell division.     

DNA replication initiation is required for mid-cell positioning of FtsZ rings in Caulobacter crescentus

Polymerization of the GTPase FtsZ to form a structure called the Z-ring is the earliest known step in bacterial cell division. Mid-cell Z-ring assembly coincides with the beginning of the replication cycle in the differentiating bacterium Caulobacter crescentus. Z-ring disassembly occurs at the end of the division cycle, resulting in the complete degradation of FtsZ from both stalked and swarmer progeny cells. New Z-rings can only form in the replicative stalked cell. Conditional mutants in DNA replication were used to determine what role DNA replication events play in the process of Z-ring assembly at different stages in the cell cycle. Z-ring assembly occurred even when early stages of DNA replication were blocked; however, the Z-rings were localized at a subpolar region of the cell. Z-rings only assembled at the proper mid-cell location if DNA replication had initiated. Z-ring assembly coincided with areas containing little or no DNA, and Z-rings could not form over an unreplicated chromosome. Overexpressed FtsZ in the absence of DNA replication did not stimulate productive mid-cell Z-ring assembly but, instead, caused the ends of cells to constrict over an extended area away from the nucleoid. These results indicate that the state of chromosome replication is a major determinant of Z-ring localization in Caulobacter.