A novel thermostable xylanase from Thermomonospora sp.: influence of additives on thermostability

An alkalothermophilic Thermomonospora sp. producing high levels of xylanase was isolated from self-heating compost. The culture produced 125 IU/ml of xylanase when grown in shake flasks at pH 9 and 50 degrees C for 96 h. The culture filtrate also contained cellulase (23 IU/ml), mannanase (1 IU/ml) and beta-xylosidase (0.1 IU/ml) activities. The xylanase was active at a broad range of pH (5-9) and temperature (40-90 degrees C). The optimum pH and temperature were 7 and 70 degrees C, respectively. The enzyme was stable in the pH range 5-8 and was thermostable with half-lives of 8 and 4 h at 60 degrees C and 70 degrees C, respectively, but only 9 min at 80 degrees C. The effects of a variety of compounds to enhance the stability of xylanase at 80 degrees C was studied. Addition of sorbitol, mannitol and glycerol increased the thermostability of xylanase in proportion to the number of hydroxyl groups per polyol molecule. Glycine also offered protection against thermoinactivation. Xylan, trehalose, gelatin and trehalose-gelatin mixture had marginal effect on the thermostability of xylanase at 80 degrees C.     

A cellulase-free xylanase from alkali-tolerantAspergillus fischeri Fxn1

Summary An alkali-tolerant fungusAsperqillus fischeri Fxn1 isolated from xylan enrichment grew in the pH range 5–10 and secreted an extracellular cellulase-free xylanase. Arabinose, lactose, maltose, cellobiose and glucose induced low levels of xylanase (1.8–9.0 IU/ml), whereas xylose, xylan and wheat bran induced higher level (34–45 IU/ml).CMcellulose and FPcellulose did not support growth. The optimum pH of xylanase was 6.0–6.5 and it was stable in a wide range of pH 5–9.5. The optimum temperature was 60°C and it was stable upto 55°C. The half-lives at 50 and 55 °C were 240 and 40 min. respectively. This enzyme released reducing sugars from pulp at pH 9.0 and 40°C.     

Xylanase and Mannanase enzymes from Streptomyces galbus NR and their use in biobleaching of softwood kraft pulp

Enzymatic pretreatment of softwood kraft pulp was investigated using xylanase and mannanase, singly or in combination, either sequentially or simultaneously. Enzymes were obtained from Streptomyces galbus NR that had been cultivated in a medium, containing either xylan of sugar cane bagasse or galactomannan of palm-seeds, when they were used as sole carbon sources from local wastes in fermentation media. No cellulase activity was detected. Incubation period, temperature, initial pH values and nature of nutritive constituents were investigated. Optimum production of both enzymes was achieved after 5 days incubation on a rotary shaker (200 rpm) at 35 degrees C and initial pH 7.0. Partial purification of xylanase and mannanase in the cultures supernatant were achieved by salting out at 40-60 and 60-80% ammonium sulphate saturation with a purification of 9.63- and 8.71-fold and 68.80 and 62.79% recovery, respectively. The xylanase and mannanase from S. galbus NR have optimal activity at 50 and 40 degrees C, respectively. Both enzymes were stable at a temperature up to 50 degrees C. Xylanase and mannanase showed highest activity at pH 6.5 and were stable from 5.0 to 8.0 and from 5.5 to 7.5, respectively. The partial purified enzymes preparations of xylanase and mannanase enzymes showed high bleaching activity, which is an important consideration for industry. Xylanase was found to be more effective for paper-bleaching than mannanase. When xylanase and mannanase were dosed together (simultaneously), both enzymes were able to enhance the liberation of reducing sugars and improve pulp bleachability, possibly as a result of nearly additive interactions. The simultaneous addition of both enzymes was more effective in pulp treatment than their sequential addition.     

Enhanced production of cellulase-free thermostable xylanase by Bacillus pumilus ASH and its potential application in paper industry

A very high level of cellulase-free, thermostable xylanase has been produced from newly isolated strain of Bacillus pumilus under submerged fermentation in a basal medium supplemented with wheat bran (2%, w/v) pH 8.0 and at 37 °C. After optimization of various production parameters, an increase of nearly 13-fold in xylanase production (5407 IU/ml) was achieved. The produced xylanase is stable in neutral to alkaline pH region at 70 °C. The suitability of this xylanase for use in the bioleaching of eucalyptus Kraft pulp was investigated. A xylanase dose of 5 IU/g of oven dried pulp of 10% consistency exhibited the optimum bleach boosting of the pulp at pH 7.0 and 60 °C after 180 min of treatment. An increase of 5% in brightness along with an increase of 21% and 28% in whiteness and fluorescence respectively, whereas 18% decrease in the yellowness of the biotreated pulp was observed. Enzyme treated pulp when subjected to chemical bleaching, resulted in 20% reduction in chlorine consumption and up to 10% reduction in consumption of chlorine dioxide. Also a reduction of about 16% in kappa number and 83% in permanganate number, along with a reduction in COD value and significant improvement in various pulp properties, viz. viscosity, tensile strength, breaking length, burst factor, burstness, tear factor and tearness were observed in comparison to the conventional chemical bleaching.     

Isolation, purification and characterization of xylanasefrom Staphylococcus sp. SG-13 and its application in biobleaching of kraft pulp

A haloalkalophilic Staphylococcus sp. SG-13 produced an alkalistable xylanase in wheat bran medium. A 12-fold purification was achieved by using standard purification techniques. The purified xylanase exhibited a dual pH optima of 7.5 and 9.2. The optimum temperature for enzyme activity was 50 degrees C. The enzyme was stable at 50 degrees C for more than 4 h. The xylanase exhibited Km and Vmax values of 4 mg ml-1, 90 micromol min-1 per mg for birchwood xylan and 7 mg ml-1, 55 micromol min-1 per mg for oatspelt xylan, respectively. The substrate binding affinity of xylanase was more for oatspelt xylan but birchwood xylan was hydrolysed more rapidly. The xylanase activity was stimulated by Fe2+, Ni2+, Cu2+ and dithiothreitol up to 60% and was strongly inhibited in the presence of Co2+, Hg2+, Pb2+, phenyl methane sulphonyl fluoride, ethylenediaminetetraacetic acid, and acetic anhydride up to 100%. The xylanase dose of 1.8 U g-1 moisture free pulp, exhibited bleach boosting of kraft pulps optimally at pH 9.5-10.0 and 50 degrees C after 4 h of reaction time. Pretreatment of pulp with xylanase and its subsequent treatment with 8% hypochlorite, reduced the kappa number by 30%, enhanced the brightness and viscosity by 11% and 1.8%, respectively, and improved the paper properties such as tensile strength and burst factor up to 10% and 17%, respectively.     

Rice straw fermentation by Schizophyllum commune ARC-11 to produce high level of xylanase for its application in pre-bleaching

Rice straw is valuable resource that has been used as substrate for cost effective production of xylanase under solid-state fermentation by a newly isolated white rot fungi, S. commune ARC-11. Out of eleven carbon sources tested, rice straw was found most effective for the induction of xylanase that produced 4288.3?IU/gds of xylanase by S. commune ARC-11. Maximum xylanase production (6721.9?IU/gds) was observed on 8^th day of incubation at temperature (30?°C), initial pH (7.0) and initial moisture content (70.0%). The supplementation of ammonium sulphate (0.08% N, as available nitrogen) enhanced the xylanase production up to 8591.4?IU/gds. The xylanase production by S. commune ARC-11 was further improved by the addition of 0.10%, (w/v) of Tween-20 as surfactant. The maximum xylanase activities were found at pH 5.0 and temperature 55?°C with a longer stability (180?min) at temperature 45, 50 and 55?°C. This xylanase preparation was also evaluated for the pre-bleaching of ethanol-soda pulp from Eulaliopsis binata. An enzyme dosage of 10?IU/g of xylanase resulted maximum decrease in kappa number (14.51%) with a maximum improvement 2.9% in ISO brightness compared to control.     

Production of thermostable pectinase and xylanase for their potential application in bleaching of kraft pulp

A very high level of alkalophilic and thermostable pectinase and xylanase has been produced from newly isolated strains of Bacillus subtilis and Bacillus pumilus respectively. Enzyme production for pectinase was carried out under SSF using combinations of cheap agricultural residues while xylanase was produced under submerged fermentation using wheat bran as substrate to minimize the cost of production of these enzymes Among the various substrates tested, the highest yield of pectinase production was observed by using combination of WB + CW (6592 U/g of dry substrate) supplemented with 4% yeast extract when incubated at 37 °C for 72 h using deionized water of pH 7.0 as moistening agent. The biobleaching effect of these cellulase free enzymes on kraft pulp was determined. Both xylanase and pectinase showed stability over a broad range of pH from 6 to 10 and temperature from 55 to 70 °C. The bleaching efficiency of the pectinase and xylanase on kraft pulp was maximum after 150 min at 60 °C using enzyme dosage of 5 IU/ml of each enzyme at 10% pulp consistency with about 16% reduction in kappa number and 84% reduction in permanganate number. Enzyme treated pulp when subjected to CDED₁D₂ steps, 25% reduction in chlorine consumption and upto 19% reduction in consumption of chlorine dioxide was observed for obtaining the same %ISO brightness. Also an increase of 22 and 84% in whiteness and fluorescence respectively and a decrease of approximately 19% in the yellowness of the biotreated pulp were observed by pretreatment of the pulp with our enzymatic mixture.     

Purification and characterization of a thermostable xylanase from Bacillus stearothermophilus T-6.

Bacillus stearothermophilus T-6 produces an extracellular xylanase that was shown to optimally bleach pulp at pH 9 and 65 degrees C. The enzyme was purified and concentrated in a single adsorption step onto a cation exchanger and is made of a single polypeptide with an apparent M(r) of 43,000 (determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis). Xylanase T-6 is an endoxylanase that completely degrades xylan to xylose and xylobiose. The pIs of the purified protein were 9 and 7 under native and denaturing conditions, respectively. The optimum activity was at pH 6.5; however, 60% of the activity was still retained at pH 10. At 65 degrees C and pH 7, the enzyme was stable for more than 10 h; at 65 degrees C and pH 9, the half-life of the enzyme was approximately 6 h. Kinetic experiments at 55 degrees C gave Vmax and Km values of 288 U/mg and 1.63 mg/ml, respectively. The enzyme had no apparent requirement for cofactors, and its activity was strongly inhibited by Zn2+, Cd2+, and Hg2+. Xylan completely protected the protein from inactivation by N-bromosuccinimide. The N-terminal sequence of the first 45 amino acids of the enzyme showed high homology with the N-terminal region of xylanase A from the alkalophilic Bacillus sp. strain C-125.     

Enhanced production of cellulase-free thermostable xylanase by Bacillus pumilus ASH and its potential application in paper industry

A very high level of cellulase-free, thermostable xylanase has been produced from newly isolated strain of Bacillus pumilus under submerged fermentation in a basal medium supplemented with wheat bran (2%, w/v) pH 8.0 and at 37 °C. After optimization of various production parameters, an increase of nearly 13-fold in xylanase production (5407 IU/ml) was achieved. The produced xylanase is stable in neutral to alkaline pH region at 70 °C. The suitability of this xylanase for use in the bioleaching of eucalyptus Kraft pulp was investigated. A xylanase dose of 5 IU/g of oven dried pulp of 10% consistency exhibited the optimum bleach boosting of the pulp at pH 7.0 and 60 °C after 180 min of treatment. An increase of 5% in brightness along with an increase of 21% and 28% in whiteness and fluorescence respectively, whereas 18% decrease in the yellowness of the biotreated pulp was observed. Enzyme treated pulp when subjected to chemical bleaching, resulted in 20% reduction in chlorine consumption and up to 10% reduction in consumption of chlorine dioxide. Also a reduction of about 16% in kappa number and 83% in permanganate number, along with a reduction in COD value and significant improvement in various pulp properties, viz. viscosity, tensile strength, breaking length, burst factor, burstness, tear factor and tearness were observed in comparison to the conventional chemical bleaching.     

A novel, alkali-tolerant thermostable xylanase from Saccharomonospora viridis: direct gene cloning, expression and enzyme characterization

A xylanase gene, designated Svixyn10A, was cloned from actinomycetes Saccharomonospora viridis and the gene product was characterized. Gene Svixyn10A contains 1,374 bp and encodes a polypeptide of 457 amino acids composed of a glycoside hydrolase family 10 catalytic domain with a putative signal peptide, a short Gly-rich linker and a family 2 carbohydrate-binding module (CBM). The deduced amino acid sequence of SviXyn10A shared the highest identity (57 %) with a hypothetical xylanase from Streptomyces lividans TK24 (ZP_05528201). A recombinant His-tagged xylanase, SviXyn10A was expressed in Escherichia coli BL21 and purified. The optimum pH and temperature for SviXyn10A is 8.0 and 60 °C. Compared with thermophilic and mesophilic counterparts, SviXyn10A was more active at high temperatures, retaining >63 % of its maximum activity at 65-70 °C and ~40 % even at 80 °C. It had broad pH adaptability (>35 % activity at pH 5.0-11.0) and alkali-tolerance (>70 % activity after incubation at pH 8.0-11.0 for 1 h at 37 °C), and was highly thermostable (>75 % activity after incubation at 70 °C for 3 h at pH 8.0). It may be the first alkali-tolerant thermostable xylanase reported from Saccharomonospora. These favorable properties make SviXyn10A a good candidate for application in pulp and paper industries.     

Production and purification of high levels of cellulase-free bacterial xylanase by Bacillus sp. SV-34S using agro-residue

Xylanase produced from the isolated bacterial strain Bacillus sp. SV-34S showed a 8.74-fold increase in enzyme activity under optimized submerged fermentation conditions. Cultivation using wheat bran as the carbon source and beef extract and (NH₄)H₂PO₄ as the nitrogen source resulted in productivity of 3,454.01 IU/mL xylanase. Xylanase was purified by 12.94-fold, with a recovery of 13.4 % and a specific activity of 3417.2 IU/mg protein, employing ammonium sulphate fractionation followed by cation-exchange chromatography using CM-Sephadex C-50 column chromatography, with a product of 27 kDa. The purified xylanase showed an optimum temperature and pH of 50 °C and 6.5, respectively although it was active even at pH 11.0. The thermostability study revealed that Bacillus sp. SV-34S was thermotolerant, being stable up to 50 °C; the residual activity at 55 and 60 °C was 96 and 93 %, respectively. The enzyme was stable between pH 6.0 and 8.0, although it retained >100 % activity at pH 8.0 and 9.0, respectively, following pre-incubation for 24 h. Xylanase activity was inhibited by various metal ions added to the assay mixture, with maximum inhibition observed in the presence of HgCl₂. The K_m and V_max values of the purified xylanase using birch wood xylan as substrate were 3.7 mg/mL and 133.33 IU/mL, respectively. The isolated bacterial strain produced high levels of extremophilic cellulase-free xylanase. The fact that it can be used in crude form and that it can be produced cheaply with renewable carbon sources make the process economically feasible. The characteristics of the purified enzyme suggest its potential application in industries such as the paper and pulp industry.     

High level expression of a recombinant xylanase by Pichia pastoris NC38 in a 5 L fermenter and its efficiency in biobleaching of bagasse pulp

A genetically modified XynA gene from Thermomyces lanuginosus was expressed in Pichia pastoris under the control of GAP promoter. P. pastoris expressed greater levels of xylanase (160 IU ml(-1)) on BMGY medium without zeocin after 56 h. The xylanase production by recombinant P. pastoris was scaled up in a 5L fermenter containing 1% glycerol and the highest xylanase production of 139 IU ml(-1) was observed after 72 h. Further studies carried out in fermenter under controlled pH (5.5) yielded a maximum xylanase production of 177 IU ml(-1) after 72 h. The biobleaching efficacy of crude xylanase was also evaluated on bagasse pulp and a brightness of 47.4% was observed with 50 IU of crude xylanase used per gram of pulp, which was 2.1 points higher in brightness than the untreated samples. Reducing sugars (24.8 mg g(-1)) and UV absorbing lignin-derived compounds values were considerably higher with xylanase treated samples.     

Development of mutants of <Emphasis Type="Italic">Melanocarpus albomyces</Emphasis> for hyperproduction of xylanase

The wild type filamentous fungus, Melanocarpus albomyces, produces many commercially valuable enzymes, including Xylanases and Xylan-debranching enzymes with low activity. In this paper, we report for the first time the development of M. albomyces mutants from vegetative spores. Profuse sporulation of M. albomyces was induced on Potato Carrot Agar medium. These spores, when subjected to chemical mutation, led to the isolation of the hyper-xylanase producing mutant, viz, M. albomyces IITD3A. Various parameters including number of spores, nitrogen source and C/N ratio of the medium were optimized for production of xylanase by the mutant in a shake flask culture. Under controlled pH at 7.8, the mutant produced highly active xylanase with 415 IU/mL after 36 h of growth on soluble alkaline lignocellulosic extract in a 14-L fermentor. The overall productivity of xylanase was 8-fold higher than the wild type culture with11, 530 IU/L/h. The enzyme can be easily stored at 37°C for 50 days by addition of a small amount of the preservative — thiomersal. Also, for long term storage, a lyophilized powder form of the enzyme can be used which retained 100% of its activity for > 50 days. When assayed at pH 7.5 and temperature 55°C, the xylanase retained 100% of its original activity, and also at pH 9.0, it retained > 50% of its activity for 2 h, which is promising for its application in the pulp and paper industry.     

Production of a xylose-stimulated β-glucosidase and a cellulase-free thermostable xylanase by the thermophilic fungus Humicola brevis var. thermoidea under solid state fermentation

Humicola brevis var. thermoidea cultivated under solid state fermentation in wheat bran and water (1:2 w/v) was a good producer of β-glucosidase and xylanase. After optimization using response surface methodology the level of xylanase reached 5,791.2 ± 411.2 U g(-1), while β-glucosidase production was increased about 2.6-fold, reaching 20.7 ± 1.5 U g(-1). Cellulase levels were negligible. Biochemical characterization of H. brevis β-glucosidase and xylanase activities showed that they were stable in a wide pH range. Optimum pH for β-glucosidase and xylanase activities were 5.0 and 5.5, respectively, but the xylanase showed 80 % of maximal activity when assayed at pH 8.0. Both enzymes presented high thermal stability. The β-glucosidase maintained about 95 % of its activity after 26 h in water at 55 °C, with half-lives of 15.7 h at 60 °C and 5.1 h at 65 °C. The presence of xylose during heat treatment at 65 °C protected β-glucosidase against thermal inactivation. Xylanase maintained about 80 % of its activity after 200 h in water at 60 °C. Xylose stimulated β-glucosidase activity up to 1.7-fold, at 200 mmol L(-1). The notable features of both xylanase and β-glucosidase suggest that H. brevis crude culture extract may be useful to compose efficient enzymatic cocktails for lignocellulosic materials treatment or paper pulp biobleaching.     

Production, Purification, and Characterization of beta-(1-4)-Endoxylanase of Streptomyces roseiscleroticus

Twelve species of Streptomyces that formerly belonged to the genus Chainia were screened for the production of xylanase and cellulase. One species, Streptomyces roseiscleroticus (Chainia rosea) NRRL B-11019, produced up to 16.2 IU of xylanase per ml in 48 h. A xylanase from S. roseiscleroticus was purified and characterized. The enzyme was a debranching beta-(1-4)-endoxylanase showing high activity on xylan but essentially no activity against acid-swollen (Walseth) cellulose. It had a very low apparent molecular weight of 5,500 by native gel filtration, but its denatured molecular weight was 22,600 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. It had an isoelectric point of 9.5. The pH and temperature optima for hydrolysis of arabinoxylan were 6.5 to 7.0 and 60 degrees C, respectively, and more than 75% of the optimum enzyme activity was retained at pH 8.0. The xylanase had a K(m) of 7.9 mg/ml and an apparent V(max) of 305 mumol . min . mg of protein. The hydrolysis rate was linear for xylan concentrations of less than 4 mg/ml, but significant inhibition was observed at xylan concentrations of more than 10 mg/ml. The predominant products of arabinoxylan hydrolysis included arabinose, xylobiose, and xylotriose.     

Characterization of a cellulase-free, neutral xylanase from Thermomyces lanuginosus CBS 288.54 and its biobleaching effect on wheat straw pulp

A xylanase purified from the thermophilic fungus Thermomyces lanuginosus CBS 288.54 was characterized and its potential application in wheat straw pulp biobleaching was evaluated. Xylanase was purified 33.6-fold to homogeneity with a recovery yield of 21.5%. It appeared as a single protein band on SDS-PAGE gel with a molecular mass of approx. 26.2 kDa. The purified xylanase had a neutral optimum pH ranging from pH 7.0 to pH 7.5, and it was also stable over pH 6.5-10.0. The optimal temperature of the xylanase was 70-75 degrees C and it was stable up to 65 degrees C. The purified xylanase was found to be not glycosylated. The xylanase was highly specific towards xylan, but did not exhibit other enzyme activity. Apparent Km values of the xylanase for birchwood, beechwood, soluble oat-spelt and insoluble oat-spelt xylans were 4.0, 4.7, 2.0 and 23.4 mg ml-1, respectively. The potential application of the xylanase was further evaluated in biobleaching of wheat straw pulp. The brightness of bleached pulps from the xylanase pretreated wheat straw pulp was 1.8-7.79% ISO higher than that of the control, and showed slightly lower tensile index and breaking length than the control. Although chlorine consumption was reduced by 28.3% during bleaching, the xylanase pretreated pulp (15 U g-1 pulp) still maintained its brightness at the control level. Besides, pretreatment of pulp with the xylanase was also effective at an alkaline pH as high as pH 10.0.     

Studies on xylan degrading enzyme from Chainia

Summary The sclerotial actinomycete Chainia (NCL 82-5-1) secreted extracellular xylanase in submerged culture in media containing yeast extract and wheat bran or commercial xylan. A high activity (28 IU/ml) of xylanase was obtained in 72 h on a medium containing 3% xylan. Only a single species of xylanase (i.e. without isoenzymes) was detected by polyacrylamide gel electrophoresis. It had an optimum pH of 5.0 and optimum temperature of 65°C. It was stable at pH 6.0 to heating at 60°C for 10 min. Its pI was 8.0 and the K_m was 0.4%. The results are discussed in relation to xylanase reported from actinomycetes such as Streptomyces xylophagus.     

Production and biochemical characterization of a novel cellulase-poor alkali-thermo-tolerant xylanase from <Emphasis Type="Italic">Coprinellus disseminatus</Emphasis> SW-1 NTCC 1165

Fungi producing xylanases are plentiful but alkali-thermo-tolerant fungi producing cellulase-poor xylanase are rare. Out of 12 fungal strains isolated from various sources, Coprinellus disseminatus SW-1 NTCC 1165 yielded the highest xylanase activity (362.1 IU/ml) with minimal cellulase contamination (0.64 IU/ml). The solid state fermentation was more effective yielding 88.59% higher xylanase activity than that of submerged fermentation. An incubation period of 7 days at 37°C and pH 6.4 accelerated the xylanase production up to the maximum level. Among various inexpensive agro-residues used as carbon source, wheat bran induced the maximum xylanase titres (469.45 IU/ml) while soya bean meal was the best nitrogen source (478.5 IU/ml). A solid substrate to moisture content ratio of 1:3 was suitable for xylanase production while xylanase titre was repressed with the addition of glucose and lactose. The xylanase and laccase activities under optimized conditions were 499.60 and 25.5 IU/ml, respectively along with negligible cellulase contamination (0.86 IU/ml). Biochemical characterization revealed that optimal xylanase activity was observed at pH 6.4 and temperature 55°C and xylanase is active up to pH 9 (40.33 IU/ml) and temperature 85°C (48.81 IU/ml). SDS–PAGE and zymogram analysis indicated that molecular weight of alkali-thermo-tolerant xylanase produced by C. disseminatus SW-1 NTCC 1165 was 43 kDa.     

Alkaline-active xylanase produced by an alkaliphilicBacillus sp isolated from kraft pulp

ABacillus sp (V1-4) was isolated from hardwood kraft pulp. It was capable of growing in diluted kraft black liquor at pH 11.5 and produced 49 IU (mol xylose min^–1 ml^–1) of xylanase when cultivated in alkaline medium at pH 9. Maximal enzyme activity was obtained by cultivation in a defined alkaline medium with 2% birchwood xylan and 1% corn steep liquor at pH 9, but high enzyme production was also obtained on wheat bran. The apparent pH optimum of the enzyme varied with the pH used for cultivation and the buffer system employed for enzyme assay. With cultivation at pH 10 and assays performed in glycine buffer, maximal activity was observed at pH 8.5; with phosphate buffer, maximal activity was between pH 6 and 7. The xylanase temperature optimum (at pH 7.0) was 55°C. In the absence of substrate, at pH 9.0, the enzyme was stable at 50°C for at least 30 min. Elecrophoretic analysis of the crude preparation showed one predominant xylanase with an alkaline pl. Biobleaching studies showed that the enzyme would brighten both hardwood and softwood kraft pulp and release chromophores at pH 7 and 9. Because kraft pulps are alkaline, this enzyme could be used for prebleaching with minimal pH adjustment.     

High-level of xylanase production by the thermophilic Paecilomyces themophila J18 on wheat straw in solid-state fermentation

The production of extracellular xylanase by a newly isolated thermophilic fungus, Paecilomyces themophila J18, on the lignocellulosic materials was studied in solid-state fermentation (SSF). The strain grew well at 50 degrees C and produced a high-level of xylanase activity using the selected lignocellulosic materials, especially wheat straw. Production of xylanase by P. themophila J18 on wheat straw was enhanced by optimizing the particle size of wheat straw, nitrogen source, initial moisture level, growth temperature and initial pH of the culture medium. Under the optimized conditions, yield as high as 18,580 Ug(-1) of carbon source of xylanase was achieved. No CMCase activity was observed. The xylanase exhibited remarkable stability and retained more than 50% of its original activity at 70 degrees C for 4h at pH 7.0-8.0. Therefore, P. themophila J18 could to be a promising microorganism for thermostable, cellulase-free xylanase production in SSF.