肌腱组织工程支架与种子细胞研究进展

目的:综述肌腱组织工程支架材料、细胞来源、制备技术及体外构建的研究进展.方法:查阅近期肌腱组织工程研究的相关文献,对组织工程肌腱支架的材料来源、制备技术,复合细胞种类,体外构建力学刺激等进行分析、归纳.结果:肌腱组织工程支架材料有天然材料、人工合成材料及复合材料等;制备技术包括静电纺丝和编织法等;其中支架材料的表面修饰是组织工程化肌腱构建的重要环节.与肌腱材料进行复合的种子细胞有肌腱细胞、骨髓间充质干细胞及成纤维细胞等.结论:复合材料是近年肌腱组织工程支架材料研究的重点,静电纺丝技术是一种具有潜力的支架制备技术,支架材料的表面修饰可促进细胞在支架上的黏附及肌腱的形成,种子细胞的研究仍是肌腱组织工程发展的瓶颈,周期性张力的存在为组织工程化肌腱的形成创造了条件.     

丝素蛋白在电纺丝法构建组织工程支架中的应用进展

丝素蛋白是天然高分子纤维蛋白,具有良好的物理和机械力学性能及生物相容性,因而在组织工程领域有着广阔的应用前景。文中对丝素蛋白的化学组成、分子结构特点、提取方法以及利用静电纺丝技术在组织工程化支架构建中的应用作了概述。总结了丝素蛋白在用于组织工程材料上的性能和优势以及在人工血管、皮肤、骨组织等工程化支架方面的应用情况,探讨了丝素蛋白支架对细胞在其上生长、增殖和功能的影响,同时对丝素蛋白在组织工程化食道支架及其他再生医学上的应用前景进行了展望。     

组织工程皮肤生物反应器的研究与设计

目的设计一套生物反应器,能针对不同支架材料———细胞复合物进行构建组织工程皮肤。方法根据皮肤的自身生长特点和不同支架材料-细胞复合物的特性,模拟皮肤的生长环境和力学环境,通过生物反应器解决组织工程皮肤构建中支架的装夹和气液界面问题。结果生物反应器由控制系统和生物反应器主体两部分构成,能提供对多种皮肤细胞复合物的动态培养。结论皮肤生物反应器能够满足不同组织工程皮肤产品的需要。能够形成气液界面和模拟生物力学的刺激。     

皮肤组织工程支架材料

皮肤组织工程支架材料为种子细胞提供生长和代谢的环境,是人工皮肤研究中的重要内容,可按来源分为合成支架材料和天然支架材料。近几年的研究重点是:前者通过表面仿生技术增强其对细胞的黏附性;后者通过物理或化学方法提高其力学性能和渗透性等。今后应重点研究以下内容:深入研究合成支架材料的表面改性,进一步提高其引导细胞行为的功能,促进材料对细胞的黏附;进一步提高天然支架材料的微观渗透性和生物活性,促进毛细血管的长入;制备结构仿生支架材料及高活性复合支架材料。     

组织工程皮肤研究现状

组织工程皮肤是通过培养功能细胞,将其与细胞外基质及支架材料互相作用,制成的具有生物活性的人工皮肤替代物。组织工程皮肤的发展为修复皮肤创面,重建皮肤功能,治疗皮肤病提供了新的方法。本文从皮肤种子细胞培养、真皮支架材料和体外构建活性复合皮三个方面对组织工程皮肤的研究进展进行了综述。目前组织工程皮肤在一定程度上克服了原有的皮肤供区不足、免疫排斥、传播疾病等各种问题。新的种子细胞和支架材料逐渐成熟,并逐渐应用于临床治疗;在种子细胞和真皮替代物基础上发展起来的复合皮肤可以更快速的促进缺损皮肤的愈合,但与在体皮肤比较尚有差距。组织工程皮肤是理想的皮肤替代物,具有良好的发展前景,未来的研究应该着眼于模仿机体皮肤的生理结构和功能,使愈合后的皮肤与在体皮肤融为一体。     

组织工程皮肤研究现状

组织工程皮肤是通过培养功能细胞,将其与细胞外基质及支架材料互相作用,制成的具有生物活性的人工皮肤替代物。组织工程皮肤的发展为修复皮肤创面,重建皮肤功能,治疗皮肤病提供了新的方法。本文从皮肤种子细胞培养、真皮支架材料和体外构建活性复合皮三个方面对组织工程皮肤的研究进展进行了综述。目前组织工程皮肤在一定程度上克服了原有的皮肤供区不足、免疫排斥、传播疾病等各种问题。新的种子细胞和支架材料逐渐成熟,并逐渐应用于临床治疗;在种子细胞和真皮替代物基础上发展起来的复合皮肤可以更快速的促进缺损皮肤的愈合,但与在体皮肤比较尚有差距。组织工程皮肤是理想的皮肤替代物,具有良好的发展前景,未来的研究应该着眼于模仿机体皮肤的生理结构和功能,使愈合后的皮肤与在体皮肤融为一体。     

人皮肤成纤维细胞在不同培养系统中的生长代谢特性

大面积烧伤病人及多种皮肤溃疡病人很难用自体皮肤移植来进行治疗.早期治疗方法采用尸体来源的皮肤移植,但由于来源有限、且有传播疾病的危险,因此应用组织工程技术构建生物活性人工皮肤已成为近十几年来在组织工程和创伤治疗领域的研究热点,目前已有几种人工皮肤成功地走向临床[1].然而,在构建大面积皮肤组织过程中,如何大量制备皮肤种子细胞仍然是一大棘手的难题,成为人体皮肤组织工程迫切需要解决的技术关键.获得大量扩增的皮肤细胞,解决种子细胞的供应问题,是构建人工皮肤的一个关键.     

光交联水凝胶在组织工程中的研究进展

由于生物相容性、可降解性、与天然细胞外基质结构的相似性,水凝胶成为组织工程的研究热点与重点。基于原位形成和可注射性、与现有加工技术(3D打印、静电纺丝)的兼容性,光交联水凝胶在组织工程领域广泛应用。综述了近年来光交联水凝胶在组织工程领域的研究进展,包括其在软骨组织、骨组织、脂肪组织、牙周组织和皮肤组织方面的研究思路及应用进展,以期为后续光交联水凝胶作为组织工程支架的研究提供参考。     

DMSO浓度及降温速率对组织工程化真皮超低温保存效果的影响

组织工程化真皮的超低温保存技术是皮肤组织工程的重要组成部分,对皮肤组织库的建立有重要意义。低温保存与低温保护剂的种类、浓度、降温复温程序及低温保护剂的添加与去除方式有着密切的关系。实验目的：研究DMSO浓度及降温速率对组织工程化真皮超低温保存效果的影响。实验方法：以培养一定时间的组织工程化真皮为试材,以不同浓度的DMSO溶液为低温保护液,以不同的降温速率降温保存,以四唑盐(MTT)比色法检测细胞存活率,辅以光学显微镜和扫描电镜观察分析。实验表明：降温速率为1℃／min,DMSO浓度为1．4mol／L时可获得在实验范围内较高的细胞存活率,为75％,超低温保存后的扫描电镜照片表明其细胞形态最为接近新鲜状态,细胞与支架材料的黏附也很紧密,这与细胞存活率的研究结果有很好的相关性。     

生物支架材料——组织工程连载之二

具有三维结构的支架材料是组织工程的核心内容之一。现有组织工程支架可分为天然生物材料、合成有机材料和无机材料三类。支架材料近年来研究十分活跃,不仅在组织工程的最早产品人工皮肤领域进行了更为完善的研究和开发,同时在诸如人工骨、软骨、神经、血管、皮肤、肝、脾、肾、膀胱等方面进行了大量研究和探索。与普通组织工程支架需要预先制备并在体外成型不同,近年来在骨和软骨组织工程实践中兴起的可注射支架具有许多优势,是未来组织工程支架发展的重要方向之一。     

Polymer‐based microparticles in tissue engineering and regenerative medicine

Different types of biomaterials, processed into different shapes, have been proposed as temporary support for cells in tissue engineering (TE) strategies. The manufacturing methods used in the production of particles in drug delivery strategies have been adapted for the development of microparticles in the fields of TE and regenerative medicine (RM). Microparticles have been applied as building blocks and matrices for the delivery of soluble factors, aiming for the construction of TE scaffolds, either by fusion giving rise to porous scaffolds or as injectable systems for in situ scaffold formation, avoiding complicated surgery procedures. More recently, organ printing strategies have been developed by the fusion of hydrogel particles with encapsulated cells, aiming the production of organs in in vitro conditions. Mesoscale self‐assembly of hydrogel microblocks and the use of leachable particles in three‐dimensional (3D) layer‐by‐layer (LbL) techniques have been suggested as well in recent works. Along with innovative applications, new perspectives are open for the use of these versatile structures, and different directions can still be followed to use all the potential that such systems can bring. This review focuses on polymeric microparticle processing techniques and overviews several examples and general concepts related to the use of these systems in TE and RE applications. The use of materials in the development of microparticles from research to clinical applications is also discussed. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Hearts beating through decellularized scaffolds: whole-organ engineering for cardiac regeneration and transplantation

Whole-organ decellularization and tissue engineering approaches have made significant inroads during recent years. If proven to be successful and clinically viable, it is highly likely that this field would be poised to revolutionize organ transplantation surgery. In particular, whole-heart decellularization has captured the attention and imagination of the scientific community. This technique allows for the generation of a complex three-dimensional (3D) extracellular matrix scaffold, with the preservation of the intrinsic 3D basket-weave macroarchitecture of the heart itself. The decellularized scaffold can then be recellularized by seeding it with cells and incubating it in perfusion bioreactors in order to create functional organ constructs for transplantation. Indeed, research into this strategy of whole-heart tissue engineering has consequently emerged from the pages of science fiction into a proof-of-concept laboratory undertaking. This review presents current trends and advances, and critically appraises the concepts involved in various approaches to whole-heart decellularization and tissue engineering.     

软骨基质来源定向结构支架复合软骨细胞体外构建组织工程软骨的研究

目的：探讨采用软骨细胞外基质材料制备的定向结构软骨支架复合软骨细胞,在体外静态培养条件下生成组织工程软骨的可能性。方法：制备牛关节软骨细胞外基质材料,利用温度梯度热诱导相分离技术构建具备垂直定向孔道结构的软骨支架,同时采用传统冷冻干燥方法制备非定向支架,检测两组支架的力学性能;提取兔关节软骨细胞,分别接种两组支架,体外静态培养2周及4周后取材,对构建的组织工程软骨进行组织切片染色、生物化学分析及生物力学检测。结果：定向软骨支架的压缩弹性模量数值明显高于非定向软骨支架,体外培养时定向支架上种子细胞在3-9d内增殖高于非定向支架,差异有统计学意义（P〈0．05）;体外静态培养4周后形成的两组新生组织工程软骨进行软骨特异性染色均呈阳性,在定向组新生软骨切片中在垂直方向上可见大量呈规则平行排列的粗大胶原纤维,两组新生软骨的生物化学检测包括总DNA、总GAG及总胶原含量差异无统计学意义（P〉0．05）。定向组织工程软骨压缩弹性模量在2周及4周时均高于非定向组织工程软骨,差异有统计学意义（P〈0．05）。但两组组织工程软骨上述指标均显著低于正常关节软骨（P〈0．05）。结论：软骨细胞外基质材料制备的定向结构软骨支架复合软骨细胞,在体外静态培养条件下能够成功生成具有定向纤维结构的组织工程软骨,并可以有效促进新生软骨组织力学性能的提升,在软骨组织工程中具有良好的应用前景。     

Engineering bone: challenges and obstacles

Repair of large bone defects is still a challenge for the orthopaedic, reconstructive and maxillo-facial surgeon. Availability of pluripotent stem cells from either autologous or allogenic sources and the potential of inducing the osteogenic phenotype is motivating exploration and development of custom-tailored materials known as "bioengineered bone constructs". In such cases, the clinical scenario involves either expansion of stem cells in monolayer and loading them into a porous scaffold prior to surgery or direct cell expansion within the scaffold, and implanting this novel construct back into the donor patient. In this review, we delineate, from an engineering perspective, the progress that has been made to date and the challenges remaining in successfully translating this promising (but not yet definitively established) approach from bench to the bed site.     

Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering

The combination of computational methods with 3D printing allows for the control of scaffolds microstructure. Lately, triply periodic minimal surfaces (TPMS) have been used to design porosity-controlled scaffolds for bone tissue engineering (TE). The goal of this work was to assess the mechanical properties of TPMS Gyroid structures with two porosity levels (50 and 70%). The scaffold stiffness function of porosity was determined by the asymptotic homogenisation method and confirmed by mechanical testing. Additionally, microCT analysis confirmed the quality of the printed parts. Thus, the potential of both design and manufacturing processes for bone TE applications is here demonstrated.     

Osteochondral tissue coculture: An in vitro and in silico approach

Osteochondral tissue engineering aims to regenerate functional tissue-mimicking physiological properties of injured cartilage and its subchondral bone. Given the distinct structural and biochemical difference between bone and cartilage, bilayered scaffolds, and bioreactors are commonly employed. We present an osteochondral culture system which cocultured ATDC5 and MC3T3-E1 cells on an additive manufactured bilayered scaffold in a dual-chamber perfusion bioreactor. Also, finite element models (FEM) based on the microcomputed tomography image of the manufactured scaffold as well as on the computer-aided design (CAD) were constructed; the microenvironment inside the two FEM was studied and compared. In vitro results showed that the coculture system supported osteochondral tissue growth in terms of cell viability, proliferation, distribution, and attachment. In silico results showed that the CAD and the actual manufactured scaffold had significant differences in the flow velocity, differentiation media mixing in the bioreactor and fluid-induced shear stress experienced by the cells. This system was shown to have the desired microenvironment for osteochondral tissue engineering and it can potentially be used as an inexpensive tool for testing newly developed pharmaceutical products for osteochondral defects.     

Dedifferentiated fat cells differentiate into osteoblasts in titanium fiber mesh

Mature adipocyte-derived dedifferentiated fat (DFAT) cells rapidly differentiate into osteoblasts under three-dimensional culture conditions. However, it has not been demonstrated that DFAT cells can differentiate into osteoblasts in a rigid scaffold consisting of titanium fiber mesh (TFM). We examined the proliferation and osteogenic differentiation ability of DFAT cells using TFM as a scaffold. DFAT cells derived from rabbit subcutaneous fat were seeded into TFM and cultured in osteogenic medium containing dexamethasone, l-ascorbic acid 2-phosphate and β-glycerophosphate for 14 days. In scanning electron microscopy (SEM) analysis, well-spread cells covered the titanium fibers on day 3, and appeared to increase in number from day 3 to 7. Numerous globular accretions were found and almost completely covered the fibers on day 14. Cell proliferation, as measured by DNA content in the TFM, was significantly higher on day 7 compared with that of day 1. Osteocalcin and calcium content in the TFM were significantly higher on day 14 compared to those of days 1, 3, and 7, indicating DFAT cells differentiated into osteoblasts. We theorize that globular accretions observed in SEM analysis may be calcified matrix resulting from osteocalcin secreted by osteoblasts binding calcium contained in fetal bovine serum. In this study, we demonstrated that DFAT cells differentiate into osteoblasts and deposit mineralized matrices in TFM. Therefore, the combination of DFAT cells and TFM may be an attractive option for bone tissue engineering.