Effects of localized and general fatigue on static and dynamic postural control in male team handball athletes

In team sports, sensorimotor impairments resulting from previous injuries or muscular fatigue have been suggested to be factors contributing to an increased injury risk. Although it has been widely shown that physical fatigue affects static postural sway, it is still questionable as to what extent these adaptations are relevant for dynamic, sports-related situations. The objective of this study was to determine the effects of whole-body and localized fatigue on postural control in stable and unstable conditions. Nineteen male team handball players were assessed in 2 sessions separated by 1 week. Treadmill running and single-leg step-up exercises were used to induce physical fatigue. The main outcome measures were center of pressure (COP) sway velocity during a single-leg stance on a force plate and maximum reach distances of the star excursion balance test (SEBT). The COP sway velocity increased significantly (p < 0.05) after general (+47%) and localized fatigue (+10%). No fatigue effects were found for the SEBT. There were no significant correlations between COP sway velocity and SEBT mean reach in any condition. The results showed that although fatigue affects static postural control, sensorimotor mechanisms responsible for regaining dynamic balance in healthy athletes seem to remain predominantly intact. Thus, our data indicate that the exclusive use of static postural sway measures might not be sufficient to allow conclusive statements regarding sensorimotor control in the noninjured athlete population.     

Lower extremity control and dynamics during backward angular impulse generation in forward translating tasks

Observation of complex whole body movements suggests that the nervous system coordinates multiple operational subsystems using some type of hierarchical control. When comparing two forward translating tasks performed with and without backward angular impulse, we have learned that both trunk-leg coordination and reaction force-time characteristics are significantly different between tasks. This led us to hypothesize that differences in trunk-leg coordination and reaction force generation would induce between-task differences in the control of the lower extremity joints during impulse generation phase of the tasks. Eight highly skilled performers executed a series of forward jumps with and without backward rotation (reverse somersault and reverse timer, respectively). Sagittal plane kinematics, reaction forces, and electromyograms of lower extremity muscles were acquired during the take-off phase of both tasks. Lower extremity joint kinetics were calculated using inverse dynamics. The results demonstrated between-task differences in the relative angles between the lower extremity segments and the net joint forces/reaction force and the joint angular velocity profiles. Significantly less knee extensor net joint moments and net joint moment work and greater hip extensor net joint moments and net joint moment work were observed during the push interval of the reverse somersault as compared to the reverse timer. Between-task differences in lower extremity joint kinetics were regulated by selectively activating the bi-articular muscles crossing the knee and hip. These results indicate that between-task differences in the control of the center of mass relative to the reaction force alters control and dynamics of the multijoint lower extremity subsystem.     

Effect of landing height on frontal plane kinematics, kinetics and energy dissipation at lower extremity joints

Lack of the necessary magnitude of energy dissipation by lower extremity joint muscles may be implicated in elevated impact stresses present during landing from greater heights. These increased stresses are experienced by supporting tissues like cartilage, ligaments and bones, thus aggravating injury risk. This study sought to investigate frontal plane kinematics, kinetics and energetics of lower extremity joints during landing from different heights. Eighteen male recreational athletes were instructed to perform drop-landing tasks from 0.3- to 0.6-m heights. Force plates and motion-capture system were used to capture ground reaction force and kinematics data, respectively. Joint moment was calculated using inverse dynamics. Joint power was computed as a product of joint moment and angular velocity. Work was defined as joint power integrated over time. Hip and knee joints delivered significantly greater joint power and eccentric work (p<0.05) than the ankle joint at both landing heights. Substantial increase (p<0.05) in eccentric work was noted at the hip joint in response to increasing landing height. Knee and hip joints acted as key contributors to total energy dissipation in the frontal plane with increase in peak ground reaction force (GRF). The hip joint was the top contributor to energy absorption, which indicated a hip-dominant strategy in the frontal plane in response to peak GRF during landing. Future studies should investigate joint motions that can maximize energy dissipation or reduce the need for energy dissipation in the frontal plane at the various joints, and to evaluate their effects on the attenuation of lower extremity injury risk during landing.     

The influence of step-down technique on lower extremity mechanics during curb descent

When stepping down from a curb, individuals typically make initial ground contact with either their rearfoot or forefoot. The purpose of this study was to compare vertical ground reaction forces, lower extremity mechanics, and intra-limb work distribution when individuals adopt a rearfoot technique vs. a forefoot technique, during simulated curb descent. Sixteen subjects stepped down from a platform with both a rearfoot and a forefoot technique. Vertical ground reaction forces and sagittal plane joint kinematics and kinetics were examined for the lead limb during the step-down task. Paired t-tests were used for comparison. Subjects demonstrated greater ankle joint power and negative work, and less hip joint power and negative work, with the forefoot technique vs. the rearfoot technique. Total lower extremity negative work was greater for the forefoot technique vs. the rearfoot technique. The percent contribution to the total negative work was greater for the ankle joint, and less for the hip and knee joints, with the forefoot technique vs. the rearfoot technique. The results of this study may provide insight into how curb descent technique can be modified to alter lower extremity loading.     

Relationship between cycling mechanics and core stability

Core stability has received considerable attention with regards to functional training in sports. Core stability provides the foundation from which power is generated in cycling. No research has described the relationship between core stability and cycling mechanics of the lower extremity. The purpose of this study was to determine the relationship between cycling mechanics and core stability. Hip, knee, and ankle joint kinematic and pedal force data were collected on 15 competitive cyclists while cycling untethered on a high-speed treadmill. The exhaustive cycling protocol consisted of cycling at 25.8 km x h(-1) while the grade was increased 1% every 3 minutes. A core fatigue workout was performed before the second treadmill test. Total frontal plane knee motion (test 1: 15.1 +/- 6.0 degrees ; test 2: 23.3 +/- 12.5 degrees), sagittal plane knee motion (test 1: 69.9 +/- 4.9 degrees ; test 2: 79.3 +/- 10.1 degrees), and sagittal plane ankle motion (test 1: 29.0 +/- 8.5 degrees ; test 2: 43.0 +/- 22.9 degrees) increased after the core fatigue protocol. No significant differences were demonstrated for pedaling forces. Core fatigue resulted in altered cycling mechanics that might increase the risk of injury because the knee joint is potentially exposed to greater stress. Improved core stability and endurance could promote greater alignment of the lower extremity when riding for extended durations as the core is more resistant to fatigue.     

Paired nonlinear behavior of active and passive joint torques associated with preparation for walk-to-run gait transition

This study investigated the lower extremity torque's active and passive features during the walk-to-run gait transition with continuously increased walking speed. Fourteen volunteers participated in the experiment. Kinematic and kinetic data were collected synchronously. Five strides leading up the gait transition were examined. Peaks of the passive (e.g., contact) and active (e.g., generalized muscle torques), along with net joint torque, and time to peak torques exhibited significant differences at the last stride before gait transition, compared to the first four strides, at the ankle, knee, and hip joints, respectively. Selected peak joint active and passive torques showed significant and opposite trends at critical events within a stride cycle: such ankle joint right after heel-contact, knee joint during weight acceptance, and both hip and knee joints right before toe-off. The magnitude and the corresponding time to active and passive peak torque changed in a nonlinear pattern before the transition from walk to run. The lower extremity segment-interaction during gait transition appeared to be an active reorganization exemplified by the interaction between the lower extremity's active and passive torque components.     

Mechanical demand and multijoint control during landing depend on orientation of the body segments relative to the reaction force.

The purpose of this study was to determine how diverse momentum conditions and anatomical orientation at contact influences mechanical loading and multijoint control of the reaction force during landings. Male collegiate gymnasts (n=6) performed competition style landings (n=3) of drop jumps, front saltos, and back saltos from a platform (0.72 m) onto landing mats (0.12 m). Kinematics (200 fps), reaction forces (800 Hz) and muscle activation patterns (surface EMG, 1600 Hz) of seven lower extremity muscles were collected simultaneously. Between-task differences in segment orientation relative to the reaction force contributed to significant between-task differences in knee and hip net joint moments (NJM) during the impact phase. During the stabilization phase, ankle, knee, and hip NJMs acted to control joint flexion. Between-task differences in muscle activation patterns indicated that gymnasts scaled biarticular muscle activation to accommodate for between-task differences in NJM after contact. Activation of muscles on both sides of the joint suggests that impedance like control was used to stabilize the joints and satisfy the mechanical demand imposed on the lower extremity. Between-subject differences in the set of muscles used to control total body center of mass (TBCM) trajectory and achieve lower extremity NJMs suggests that control of multijoint movements involving impact needs to incorporate mechanical objectives at both the total body and local level. The functional consequences of such a control structure may prove to be an asset to gymnasts, particularly when required to perform a variety of landing tasks under a variety of environmental constraints.     

The influence of parachute-resisted sprinting on running mechanics in collegiate track athletes

The influence of parachute-resisted sprinting on running mechanics in collegiate track athletes. The aim of this investigation was to compare the acute effects of parachute-resisted (PR) sprinting on selected kinematic variables. Twelve collegiate sprinters (mean age 19.58 ± 1.44 years, mass 69.32 ± 14.38 kg, height 1.71 ± 9.86 m) ran a 40-yd dash under 2 conditions: PR sprint and sprint without a parachute (NC) that were recorded on a video computer system (60 Hz). Sagittal plane kinematics of the right side of the body was digitized to calculate joint angles at initial ground contact (IGC) and end ground contact (EGC), ground contact (GC) time, stride rate (SR), stride length (SL), and the times of the 40-yd dashes. The NC 40-yd dash time was significantly faster than the PR trial (p < 0.05). The shoulder angle at EGC significantly increased from 34.10 to 42.10° during the PR trial (p < 0.05). There were no significant differences in GC time, SR, SL, or the other joint angles between the 2 trials (p > 0.05). This study suggests that PR sprinting does not acutely affect GC time, SR, SL and upper extremity or lower extremity joint angles during weight acceptance (IGC) in collegiate sprinters. However, PR sprinting increased shoulder flexion by 23.5% at push-off and decreased speed by 4.4%. While sprinting with the parachute, the athlete's movement patterns resembled their mechanics during the unloaded condition. This indicates the external load caused by PR did not substantially overload the runner, and only caused a minor change in the shoulder during push-off. This sports-specific training apparatus may provide coaches with another method for training athletes in a sports-specific manner without causing acute changes to running mechanics.     

The influence of knee alignment on lower extremity kinetics during squats

The squat is an assessment of lower extremity alignment during movement, however there is little information regarding altered joint kinetics during poorly performed squats. The purpose of this study was to examine changes in joint kinetics and power from altered knee alignment during a squat. Thirty participants completed squats while displacing the knee medially, anteriorly, and with neutral alignment (control). Sagittal and frontal plane torques at the ankle, knee, and hip were altered in the descending and ascending phase of the squat in both the medial and anterior malaligned squat compared to the control squat. Ankle and trunk power increased and hip power decreased in the medial malaligned squat compared to the control squat. Ankle, knee, and trunk power increased and hip power decreased in the anterior malaligned squat compared to the control squat. Changes in joint torques and power during malaligned squats suggest that altered knee alignment increases ankle and trunk involvement to execute the movement. Increased anterior knee excursion during squatting may also lead to persistent altered loading of the ankle and knee. Sports medicine professionals using the squat for quadriceps strengthening must consider knee alignment to reduce ankle and trunk involvement during the movement.     

Muscle activation patterns of selected lower extremity muscles during stepping and cutting tasks

Lower extremity muscle activations during crossover and side step cut tasks are hypothesized to play an important role in controlling knee motion, and therefore, impact the design of knee injury prevention and rehabilitation programs. However, the contribution of lower extremity muscles to frontal and transverse plane moments during cutting tasks is unclear. The purpose of this study was to compare the muscle activation patterns of selected lower extremity muscles (vastus lateralis, medial/lateral hamstrings and medial/lateral gastrocnemius) of subjects performing a stepping down and side step cut, a stepping down and crossover cut and an equivalent straight ahead task. Ground reaction force was used to determine the cut angle, stance time and compare the lower limb loading during each task. Electromyography data during all tasks were normalized to the average activation during the straight ahead tasks to determine relative changes in muscle activation between the straight ahead and different cut styles (crossover and side step). There were no differences in the pattern of muscle activation of the vastus lateralis, or lateral hamstring muscles when comparing the cutting tasks to the equivalent straight ahead task. However, the crossover cut task resulted in significantly higher muscle activation of the medial hamstrings and lateral gastrocnemius muscles relative to both the side step cut and straight ahead tasks. These results suggest the medial/lateral hamstrings and medial/lateral gastrocnemius play a role in transverse and frontal plane control during cut tasks.     

Lower extremity joint moments during carrying tasks in children

Farm youth often carry loads that are proportionally large and/or heavy, and field measurements have determined that these tasks are equivalent to industrial jobs with high injury risks. The purpose of this study was to determine the effects of age, load amount, and load symmetry on lower extremity joint moments during carrying tasks. Three age groups (8-10 years, 12-14 years, adults), three load amounts (0%, 10%, 20% BW), and three load symmetry levels (unilateral large bucket, unilateral small bucket, bilateral small buckets) were tested. Inverse dynamics was used to determine maximum ankle, knee, and hip joint moments. Ankle dorsiflexion, ankle inversion, ankle eversion, knee adduction, and hip extension moments were significantly higher in 8-10 and 12-14 year olds. Ankle plantar flexion, ankle inversion, knee extension, and hip extension moments were significantly increased at 10% and 20% BW loads. Knee and hip adduction moments were significantly increased at 10% and 20% BW loads when carrying a unilateral large bucket. Of particular concern are increased ankle inversion and eversion moments for children, along with increased knee and hip adduction moments for heavy, asymmetrical carrying tasks. Carrying loads bilaterally instead of unilaterally avoided increases in knee and hip adduction moments with increased load amount.     

The effects of sloped surfaces on locomotion: backward walking as a perturbation

The purpose of this study was to examine lower extremity kinetics and muscle activity during backward slope walking to clarify the relationship between joint moments and powers and muscle activity patterns observed in forward slope walking. Nine healthy volunteers walked backward on an instrumented ramp at three grades (-39% (-21 degrees ), 0% (level), +39% (+21 degrees )). EMG activity was recorded from major lower extremity muscles. Joint kinetics were obtained from kinematic and force platform data. The knee joint moment and power generation increased significantly during upslope walking; hip joint moment and power absorption increased significantly during downslope walking. When compared to data from forward slope walking, these backward walking data suggest that power requirements of a task dictate the muscle activity pattern needed to accomplish that movement. During downslope walking tasks, power absorption increased and changes in muscle activity patterns were directly related to the changes in the joint moment patterns. In contrast, during upslope walking tasks, power generation increased and changes in the muscle activity were related to the changes in the joint moments only at the 'primary' joint; at adjacent joints the changes in muscle activity were unrelated to the joint moment pattern. The 'paradoxical' changes in the muscle activity at the adjacent joints are possibly related to the activation of biarticular muscles required by the increased power generation at the primary joint. In total, these data suggest that changing power requirements at a joint impact the control of muscle activity at that and adjacent joints.     

Effects of added trunk load and corresponding trunk position adaptations on lower extremity biomechanics during drop-landings

Although both trunk mass and trunk position have the potential to affect lower extremity biomechanics during landing, these effects are not well understood. Our overall hypothesis stated that both trunk mass and trunk position affect lower extremity biomechanics in landing. Thus, our purpose was to determine the effects of an added trunk load and kinematic trunk adaptation groups on lower extremity joint kinematics, kinetics, and energetics during drop-landings. Twenty-one recreationally active subjects were instrumented for biomechanical analysis. Subjects performed two sets of eight double-limb landings with and without 10% body weight added to the trunk. On lower extremity dependent variables, 2(condition: no load, trunk load)x2(group: trunk extensors vs. trunk flexors) ANOVAs were performed. Condition by group interactions at the hip showed differing responses to the added trunk load between groups where the trunk extensor group decreased hip extensor efforts ( downward decrease 11-18%) while the trunk flexor group increased hip extensor efforts ( upward increase 14-19%). The trunk load increased biomechanical demands at the knee and ankle regardless of trunk adaptation group. However, the percent increases in angular impulses and energy absorption in the trunk extensor group were 14-28% while increases in the trunk flexor group were 4-9%. Given the 10% body weight added to the trunk, the 14-28% increases at the knee and ankle in the trunk extensor group were likely due to the reduced hip extensor efforts during landing. Overall these findings support our overall hypothesis that both trunk mass and trunk position affect lower extremity biomechanics during vertically oriented landing tasks.     

An upper extremity kinematic model for evaluation of hemiparetic stroke

Quantification of rehabilitation progress is necessary for accurately assessing clinical treatments. A three-dimension (3D) upper extremity (UE) kinematic model was developed to obtain joint angles of the trunk, shoulder and elbow using a Vicon motion analysis system. Strict evaluation confirmed the system's accuracy and precision. As an example of application, the model was used to evaluate the upper extremity movement of eight hemiparetic stroke patients with spasticity, while completing a set of reaching tasks. Main outcome measures include kinematic variables of movement time, range of motion, peak angular velocity, and percentage of reach where peak velocity occurs. The model computed motion patterns in the affected and unaffected arms. The unaffected arm showed a larger range of motion and higher angular velocity than the affected arm. Frequency analysis (power spectrum) demonstrated lower frequency content for elbow angle and angular velocity in the affected limb when compared to the unaffected limb. The model can accurately quantify UE arm motion, which may aid in the assessment and planning of stroke rehabilitation, and help to shorten recovery time.     

Persons with multiple sclerosis show altered joint kinetics during walking after participating in elliptical exercise

Patients with multiple sclerosis (MS) experience abnormal gait patterns and reduced physical activity. The purpose of this study was to determine if an elliptical exercise intervention for patients with MS would change joint kinetics during gait toward healthy control values. Gait analysis was performed on patients with MS (n = 24) before and after completion of 15 sessions of supervised exercise. Joint torques and powers were calculated, while also using walking velocity as a covariate, to determine the effects of elliptical exercise on lower extremity joint kinetics during gait. Results show that elliptical exercise significantly altered joint torques at the ankle and hip and joint powers at the ankle during stance. The change in joint power at the ankle indicates that, after training, patients with MS employed a walking strategy that is more similar to that of healthy young adults. These results support the use of elliptical exercise as a gait training tool for patients with MS.     

The validity of summing lower extremity individual joint kinetic measures

In the analysis of human movement, researchers often sum individual joint kinetics to obtain a single measure of lower extremity function. The extent to which these summed measures relate to the mechanical objectives of the task has not been formally validated. The criterion validity of these measures was established with comparisons to the mechanical objective of two multiple-joint tasks. For the Work task 18 participants performed a loaded barbell squat using 4 resistances while instrumented for biomechanical analysis. For the Power they performed 2 predetermined amounts of work at both self-selected and fast speeds. Using inverse dynamics techniques, the peak net joint moment (PM) was calculated bilaterally in the sagittal plane at the ankle, knee, and hip and was summed into a single measure. This measure was correlated with the task objectives using simple linear regression. Similar procedures were used for the average net joint moment (AM), peak (PP), and average (AP) net joint moment power, and the net joint moment impulse (IM) and work (IP). For the Work task all 6 measures were significantly correlated with the task objective, but only AM, PM, and IP had correlation coefficients above 0.90. For the Power task, IM was not significantly correlated with the task objective, and only AP had a correlation coefficient above 0.90. These findings indicate that the validity of summing individual kinetic measures depends on both the measure chosen and the mechanical objective of the task.     

Timing of neuromuscular activation of the quadriceps and hamstrings prior to landing in high school male athletes, female athletes, and female non-athletes.

There is a discrepancy between males and females in regards to lower extremity injury rates, particularly at the knee [Agel, J., Arendt, E.A., Bershadsky, B., 2005. Anterior cruciate ligament injury in National Collegiate Athletic Association basketball and soccer: a 13-year review. American Journal of Sports Medicine 33, (4) 524-530]. Gender differences in neuromuscular recruitment characteristics of the muscles that stabilize the knee are often implicated as a factor in this discrepancy. There is considerable research in the area of gender differences in regards to neuromuscular characteristics of the lower extremity in response to perturbation; however, most studies have been performed on the adult population only. Additionally, there is no consensus as to the gender differences that have been demonstrated. The purpose of this study was to compare muscular preactivation of selected lower extremity muscles (vastus medialis, rectus femoris, and medial/lateral hamstrings) in adolescent female basketball athletes, male basketball athletes, and female non-athletes in response to a drop landing. Subjects in the female non-athlete group recruited rectus femoris significantly slower than both the female athlete and male athlete groups (619.9=588.5>200.1ms prior to ground contact). The female non-athlete group also demonstrated a significantly slower vastus medialis compared to the female athlete group (127.1 vs 408.1ms), but not significantly slower than the male athlete group (127.1 vs 275.7ms). There were no differences between female athletes and male athletes for time to initial contraction of any muscle groups. No differences were found among the groups for medial or lateral hamstring activation. This study demonstrates that physical conditioning due to basketball participation appears to affect neuromuscular recruitment in adolescents and reveals a necessity to find alternate methods of training the hamstrings for improved neuromuscular capabilities to prevent injury.     

The effects of floor incline on lower extremity biomechanics during unilateral landing from a jump in dancers

Retrospective studies have suggested that dancers performing on inclined ("raked") stages have increased injury risk. One study suggests that biomechanical differences exist between flat and inclined surfaces during bilateral landings; however, no studies have examined whether such differences exist during unilateral landings. In addition, little is known regarding potential gender differences in landing mechanics of dancers. Professional dancers (N = 41; 14 male, 27 female) performed unilateral drop jumps from a 30 cm platform onto flat and inclined surfaces while extremity joint angles and moments were identified and analyzed. There were significant joint angle and moment effects due to the inclined flooring. Women had significantly decreased peak ankle dorsiflexion and hip adduction moment compared with men. Findings of the current study suggest that unilateral landings on inclined stages create measurable changes in lower extremity biomechanical variables. These findings provide a preliminary biomechanical rationale for differences in injury rates found in observational studies of raked stages.     

Development and validation of a 3-D model to predict knee joint loading during dynamic movement

The purpose of this study was to develop a subject-specific 3-D model of the lower extremity to predict neuromuscular control effects on 3-D knee joint loading during movements that can potentially cause injury to the anterior cruciate ligament (ACL) in the knee. The simulation consisted of a forward dynamic 3-D musculoskeletal model of the lower extremity, scaled to represent a specific subject. Inputs of the model were the initial position and velocity of the skeletal elements, and the muscle stimulation patterns. Outputs of the model were movement and ground reaction forces, as well as resultant 3-D forces and moments acting across the knee joint. An optimization method was established to find muscle stimulation patterns that best reproduced the subject's movement and ground reaction forces during a sidestepping task. The optimized model produced movements and forces that were generally within one standard deviation of the measured subject data. Resultant knee joint loading variables extracted from the optimized model were comparable to those reported in the literature. The ability of the model to successfully predict the subject's response to altered initial conditions was quantified and found acceptable for use of the model to investigate the effect of altered neuromuscular control on knee joint loading during sidestepping. Monte Carlo simulations (N = 100,000) using randomly perturbed initial kinematic conditions, based on the subject's variability, resulted in peak anterior force, valgus torque and internal torque values of 378 N, 94 Nm and 71 Nm, respectively, large enough to cause ACL rupture. We conclude that the procedures described in this paper were successful in creating valid simulations of normal movement, and in simulating injuries that are caused by perturbed neuromuscular control.     

Development of an image-based technique to examine joint congruency at the elbow

Identifying joint contact in articular joints is important for both the biomechanical investigation of joint mechanics and the study of osteoarthritis. The purpose of this study is to develop a proximity mapping technique to non-invasively determine joint congruency, as a surrogate of joint contact. To illustrate the capabilities of this algorithm, a cadaveric upper extremity was positioned at varying degrees of elbow flexion. This technique was validated using a gold standard experimental casting technique. The pattern of the cast showed an excellent agreement with the generated proximity map using the inter-bone distance algorithm. The results from this study agree with the results of previous studies examining joint contact at the elbow both in the location and in the tracking of the joint contact throughout elbow flexion. Ultimately, this technique will lead to an increased understanding of the effect of malalignment and instability of the joint on contact mechanics.