The material cost and stickiness of capture threads and the evolution of orb-weaving spiders

Prey capture threads are essential to the operation of spider orb-webs because they prevent insects that have been intercepted from escaping before a spider can subdue them. The volume of material invested in a web's capture threads is related to spider weight and is the same for primitive orb-weavers that produce cribellar capture thread and modern orb-weavers that produce adhesive capture thread. However, as adhesive capture thread achieves greater stickiness relative to its volume, adhesive orb-webs have a greater total stickiness and, consequently, a greater prey capture potential than cribellate orb-webs. These differences appear to have favoured the transition from cribellate to adhesive capture threads and the success of adhesive orb-weavers, which include 95% of all orb-weaving species. Differences in the thread economy and the total stickiness of webs constructed by spiders of different weights also suggest that adhesive orb-weavers should grow more rapidly and be capable of attaining a larger size than cribellate orb-weavers.     

Capture thread extensibility of orb-weaving spiders: testing punctuated and associative explanations of character evolution

Spider orb-webs contain sticky prey capture threads and non-sticky support threads. Primitive orb-weavers of the Deinopoidea produce dry cribellar threads made of thousands of silk fibrils that surround supporting axial fibres, whereas the viscous threads of modern Araneoidea orb-weavers produce adhesive threads with an aqueous solution that coalesces as droplets around the axial fibres. We have previously shown that the greater diversity of the Araneoidea is phylogenetically significant and attributed this disparity to a number of advantages, considered key innovations, that adhesive thread has over cribellar thread. An important putative advantage of adhesive thread demonstrated by Kohler and Vollrath in their 1995 study is its greater extensibility, a feature that better adapts it to absorb the kinetic energy of a prey strike. However, this conclusion is based on a two-species comparison that does not take advantage of the modern comparative method that requires hypotheses to be tested in a phylogenetic context. Using a transformational analysis to examine threads produced by nine species, our study finds no support for the punctuated explanation that adhesive thread has a greater extensibility than cribellar thread. Instead, it strongly supports the associative null hypothesis that capture thread extensibility is tuned to spider mass and to architectural features of the web, including its capture area, capture spiral spacing, and capture area per radius.     

Changes in spinning anatomy and thread stickiness associated with the origin of orb-weaving spiders

The cribellum is an oval spinning field whose spigots produce silk fibrils that form the outer surfaces of the primitive prey capture threads found in aerial spider webs. A comparison of the cribella and cribellar capture threads of 13 species of spiders representing seven families (Amaurobiidae, Desidae, Dictynidae, Filistatidae, Neolanidae, Oecobiidae, and Uloboridae) confirms that the stickness of a cribellar thread is directly related to the number of spigots on a spider's cribellum. This comparison also demonstrates that the origin of orb-weaving spiders from ancestors that constructed less highly organized webs was associated with increases in both the weight-specific number of cribellum spigots and the weight-specific stickiness of cribellar prey capture threads. In contrast to other cribellate spiders, the number of cribellum spigots of orb-weaving species of the family Uloboridae scales to spider mass. Thus, the origin of orb-weaving spiders involved not only behavioural changes that stylized and restricted the placement of cribellar threads, but also included morphological changes that increased the stickiness of these capture threads by endowing them with more cribellar fibrils.     

Adhesive compatibility of cribellar and viscous prey capture threads and its implication for the evolution of orb-weaving spiders

Evolution of orb-weaving spiders that comprise the Orbiculariae clade involved a transition in the composition of prey capture thread that has been challenging to explain. The primitive cribellar threads spun by members of the Deinopoidea subclade resemble the capture threads of their non-orb-web-weaving ancestors and are formed of thousands of fine, dry, protein cribellar fibrils. In contrast, the derived viscous capture threads spun by members of the Araneoidea subclade have regularly spaced, aqueous adhesive droplets. When second instar deinopoid spiderlings emerge from egg sacs they are unable to spin cribellar threads, and, therefore, do not construct orb-webs; whereas second instar araneoids spin capture threads and construct orb-webs. If, as we hypothesize, viscous material evolved to enable second instar spiderlings to construct orb-webs, early araneoids may have spun composite cribellar-viscous capture threads. To examine the functional feasibility of such intermediate capture threads, we compared the adhesion of cribellar threads, viscous threads, and combined cribellar-viscous threads. The stickiness of these combined threads was greater than that of native cribellar or viscous threads alone. The viscous material of Araneus marmoreus threads exhibited a substantial increase in stickiness when combined with cribellar fibrils and that of Argiope aurantia threads a small increase in stickiness when combined with cribellar fibrils. Thus, if early araneoids retained their ability to spin cribellar threads after having evolved glands that produced viscous material, their composite threads could have formed a functional adhesive system that achieved its stickiness at no loss of material economy.     

Adhesive efficiency of spider prey capture threads

Cribellar capture threads are comprised of thousands of fine silk fibrils that are produced by the spigots of a spider's cribellum spinning plate and are supported by larger interior axial fibers. This study examined factors that constrain the stickiness of cribellar threads spun by members of the orb-weaving family Uloboridae in the Deinopoidea clade and compared the material efficiency of these threads with that of viscous capture threads produced by members of their sister clade, the Araneoidea. An independent contrast analysis confirmed the direct relationship between cribellar spigot number and cribellar thread stickiness. A model based on this relationship showed that cribellar thread stickiness is achieved at a rapidly decreasing material efficiency, as measured in terms of stickiness per spigot. Another limitation of cribellar thread was documented when the threads of two uloborid species were measured with contact plates of four widths. Unlike that of viscous threads, the stickiness of cribellar threads did not increase as plate width increased, indicating that only narrow bands along the edges of thread contact contributed to their stickiness. As thread volume increased, the gross material efficiency of cribellar threads decreased much more rapidly than that of viscous threads. However, cribellar threads achieved their stickiness at a much greater gross material efficiency than did viscous threads, making it more challenging to explain the transition from deinopoid to araneoid orb-webs.     

Evolution of adhesive mechanisms in cribellar spider prey capture thread: evidence for van der Waals and hygroscopic forces

Sticky prey capture threads are produced by many members of the spider infraorder Araneomorphae. Cribellar threads are plesiomorphic for this clade, and viscous threads are apomorphic. The outer surface of cribellar thread is formed of thousands of fine, looped fibrils. Basal araneomorphs produce non-noded cribellar fibrils, whereas more derived members produce noded fibrils. Cribellar fibrils snag and hold rough surfaces, but other forces are required to explain their adherence to smooth surfaces. Threads of Hypochilus pococki (Hypochilidae) formed of non-noded fibrils held to a smooth plastic surface with the same force under low and high humidities. In contrast, threads of Hyptiotes cavatus and Uloborus glomosus (Uloboridae) formed of noded fibrils held with greater force to the same surface at intermediate and high humidities. This supports the hypothesis that van der Waals forces allow non-noded cribellar fibrils to adhere to smooth surfaces, whereas noded fibrils, owing to the hydrophilic properties of their nodes, add hygroscopic forces at intermediate and high humidities. Thus, there appear to have been two major events in the evolution of adhesive mechanisms in spider prey capture thread: the addition of hydrophilic nodes to the fibrils of cribellar threads and the replacement of cribellar fibrils by viscous material and glycoprotein glue.  © 2002 The Linnean Society of London, Biological Journal of the Linnean Society , 2002, 77 , 1–8.     

Economics of spider orb-webs: the benefits of producing adhesive capture thread and of recycling silk

1. The replacement of dry, fuzzy cribellar prey capture thread by viscous, adhesive capture thread was a major event in the evolution of orb-weaving spiders. Over 95% of all orb-weaving species now produce adhesive threads.
2. Adhesive thread achieves its stickiness with a much greater material economy than does cribellar thread.
3. Transformational analyses show that, relative to spider mass, adhesive orb-weavers invest less material per mm of capture thread and produce stickier capture threads than do cribellate orb-weavers.
4. The total cost of producing an orb-web that contains cribellar thread is reduced by 32% when a spider recycles its silk and another 34% when these capture threads are replaced by adhesive threads of equal stickiness.
5. The increased economy with which adhesive capture thread achieves its stickiness may have been an important factor that favoured the origin and success of modern orb-weaving spiders that produce adhesive capture threads.     

Potential carbon gain of shingle leaves in juveniles of the vine Monstera tenuis (Araceae) in Costa Rica

The amount of light intercepted by vertically oriented, shingle leaves of juvenile Monstera tenuis vines growing in forest understory was compared to the amount of light the leaves would intercept if they were horizontal. Light levels were monitored using quantum sensors and hemispherical photography. Shingle leaves absorb less light than they would if the leaves were horizontal at the same positions, and the difference increases with height in the forest. Modeling based on measured photosynthetic light responses and light interception suggests that at 1 m height, 75% more carbon could be gained if leaves were horizontal instead of vertical. Because the vertical leaf orientation reduces light interception, other selective factors are likely of greater importance in favoring the evolution of the shingle-leaved growth form.     

Fine structure of sheet-webs of Linyphia triangularis (Clerck) and Microlinyphia pusilla (Sundevall), with remarks on the presence of viscid silk

We examined the webs of Linyphia triangularis (Clerck) and Microlinyphia pusilla (Sundevall) using light and scanning electronic microscopic techniques and compared them with the better known orb‐webs. The linyphiid sheet‐web consists of an unordered meshwork of fibres of different thicknesses. The sheet is connected to the scaffolding by means of attachment discs. Thin threads with globules, which appear similar to the viscid silk droplets of orb‐webs, are present in most webs examined. Webs of M. pusilla had a higher density of these globules than did webs of L. triangularis. Webs of both species possess five types of thread connections and contain no aqueous glue for prey capture. Instead, unlike orb‐webs, the sticky substances produced by the linyphiid aggregate glands cement the different layers and threads of the sheet by drying up after being produced. Due to their function, sheet webs may not require viscid silk, thereby leading to a more economic web. The assumption made in most previous studies, that the globules in linyphiid webs have the same properties and function as viscid silk in orb‐webs, is unfounded.     

外源褪黑素对干旱胁迫下黑麦草和苜蓿抗氧化能力及养分吸收的影响

以黑麦草和苜蓿为对象,分别叶面喷施和根施100 μmol·L^-1的褪黑素溶液,在干旱胁迫下测定了生物量、丙二醛(MDA)含量、相对电导率、超氧化物歧化酶(SOD)、过氧化物酶(POD)和过氧化氢酶(CAT)活性、养分含量(有机碳C、全氮N、全磷P)等指标,研究外源褪黑素对干旱胁迫下植物抗氧化能力及养分吸收的影响。结果表明: 干旱胁迫下,黑麦草和苜蓿的地上、地下生物量显著降低,外施褪黑素能够有效缓解干旱胁迫对黑麦草和苜蓿生长的抑制作用,叶面喷施和根施褪黑素使干旱胁迫下黑麦草的生物量分别增加14.5%和29.6%,苜蓿的生物量分别增加36.6%和49.1%。干旱胁迫下,黑麦草的SOD、POD活性和苜蓿的SOD活性显著降低,外施褪黑素显著提高黑麦草和苜蓿的SOD、POD、CAT活性,减少叶片中MDA的积累,使叶片相对电导率显著下降,抗氧化能力显著提高。干旱和外施褪黑素对黑麦草和苜蓿有机碳含量无显著影响。干旱胁迫下,黑麦草叶片和根中的N、P含量以及苜蓿根中的N含量降低,外施褪黑素提高黑麦草和苜蓿根和叶片中的N、P含量,这表明褪黑素对干旱胁迫下黑麦草和苜蓿的养分吸收有一定的调节作用。施用褪黑素不仅能改善植物的抗氧化能力,还能调节养分吸收以增强植物对干旱胁迫的适应性,而且叶面喷施褪黑素效果好于根施。     

TESTING ADAPTIVE RADIATION AND KEY INNOVATION HYPOTHESES IN SPIDERS

We combine statistical and phylogenetic approaches to test the hypothesis that adaptive radiation and key innovation have contributed to the diversity of the order Araneae. The number of unbalanced araneid clades (those whose species numbers differ by 90% or more) exceeds the number predicted by a null Markovian model. The current phylogeny of spider families contains 74 bifurcating nodes, of which 31 are unbalanced. As this is significantly more than the 14.8 expected unbalanced nodes, some of the diversity within the Araneae can be attributed to some deterministic cause (e.g., adaptive radiation). One of the more highly unbalanced (97%) bifurcations divides the orb-weaving spiders into the Deinopoidea and the larger Araneoidea. A simple statistical model shows that the inequality in diversity between the Deinopoidea and the Araneoidea is significant, and that it is associated with the replacement of primitive cribellar capture thread by viscous adhesive thread and a change from a horizontal to a vertical orb-web orientation. These changes improve an orb-web's ability to intercept and retain prey and expand the adaptive zone that orb-weaving spiders can occupy and are, therefore, considered to be “key innovations.”     

4种蚜虫对异色瓢虫生长发育和繁殖的影响

为明确桃蚜、萝卜蚜、胡萝卜微管蚜、瓜蚜对异色瓢虫种群扩繁的适宜性,在实验室条件下,以4种蚜为食料构建异色瓢虫两性生命表,研究不同蚜虫对异色瓢虫生长发育和繁殖的影响。结果表明: 取食不同蚜虫,异色瓢虫未成熟期由长到短依次为萝卜蚜(18.18 d)、瓜蚜(17.48 d)、胡萝卜微管蚜(16.23 d)、桃蚜(15.77 d);成虫前期存活率由高到低依次为胡萝卜微管蚜(88.3%)、桃蚜(86.7%)、萝卜蚜(55.0%)、瓜蚜(55.0%);成虫繁殖力由高到低依次为胡萝卜微管蚜(1750.5粒)、桃蚜(1441.5粒)、瓜蚜(1006.3粒)、萝卜蚜(965.2粒);成虫寿命由长到短依次为胡萝卜微管蚜(78.8 d)、桃蚜(63.1 d)、瓜蚜(54.3 d)、萝卜蚜(48.4 d);异色瓢虫种群内禀增长率r_m由高到低依次为桃蚜(0.19)、胡萝卜微管蚜(0.18)、萝卜蚜(0.14)、棉蚜(0.14);净增值率R₀由高到低依次为胡萝卜微管蚜(895.83)、桃蚜(600.62)、萝卜蚜(273.47)、棉蚜(268.33)。4种蚜虫中,胡萝卜微管蚜和桃蚜更有利于异色瓢虫种群扩繁。     

The ecological and evolutionary interdependence between web architecture and web silk spun by orb web weaving spiders

Spider orb webs are dynamic, energy absorbing nets whose ability to intercept prey is dependent on both the mechnical properties of web design and the material properties of web silks. Variation in web designs reflects variation in spider web spinning behaviours and variation in web silks reflects variation in spider metabolic processes. Therefore, natural selection may affect web function (or prey capture) through two independent and alternative pathways. In this paper, I examine the ways in which architectural and material properties, singly and in concert, influence the ability of webs to absorb insect impact energy. These findings are evaluated in the context of the evolution of diverse aerial webs. Orb webs range along a continuum from high to low energy absorbing. No single feature of web architecture characterizes the amount of energy webs can absorb, but suites of characters indicate web function. In general, webs that intercept heavy and fast flying prey (high energy absorbing webs) are large, built by large spiders, suspended under high tension and characterized by a ratio of radii to spiral turns per web greater than one. In contrast, webs that intercept light and slow flying prey (low energy absorbing webs) are suspended under low tension, are small and are characterized by radial to spiral turn ratios that are less than one. The data suggest that for spiders building high energy absorbing webs, the orb architecture contributes much to web energy absorption. In contrast, for spiders that build low energy absorbing webs, orb architecture contributes little to enhance web energy absorption. Small or slow flying insects can be intercepted by web silks regardless of web design. Although there exists variation in the material properties of silk collected from high and low energy absorbing webs, only the diameter of web fibres varies predictably with silk energy absorption. Web fibre diameter and hence the amount of energy absorbed by web silks is an isometric function of spider size. The significance of these results lies in the apparent absence of selective advantage of orb architecture to low energy absorbing webs and the evolutionary trend to small spiders that build them. Where high energy absorption is not an exacting feature of web design, web architecture should not be tightly constrained to the orb. Assuming the primitive araneoid web design is the orb web, I propose that the evolution of alternative web building behaviours is a consequence of the general, phyletic trend to small size among araneoids. Araneoids that build webs of other than orb designs are able to use new habitats and resources not available to their ancestors.     

A virtual robot to model the use of regenerated legs in a web-building spider

The garden cross orb-spider, Araneus diadematus, shows behavioural responses to leg loss and regeneration that are reflected in the geometry of the web's capture spiral. We created a virtual spider robot that mimicked the web construction behaviour of thus handicapped real spiders. We used this approach to test the correctness and consistency of hypotheses about orb web construction. The behaviour of our virtual robot was implemented in a rule-based system supervising behaviour patterns that communicated with the robot's sensors and motors. By building the typical web of a nonhandicapped spider our first model failed and led to new observations on real spiders. We realized that in addition to leg position, leg posture could also be of importance. The implementation of this new hypothesis greatly improved the results of our simulation of a handicapped spider. Now simulated webs, like the real webs of handicapped spiders, had significantly more gaps in successive spiral turns compared with webs of nonhandicapped spiders. Moreover, webs built by the improved virtual spiders intercepted prey as well as the digitized real webs. However, the main factors that affected web interception frequency were prey size, size of capture area and individual variance; having a regenerated leg, surprisingly, was relatively unimportant for this trait. Copyright 1999 The Association for the Study of Animal Behaviour.     

Webs of theridiid spiders: construction, structure and evolution

Understanding the web construction behaviour of theridiid (comb-footed) spiders is fundamental to formulating specific evolutionary hypotheses and predictions regarding the reduction of orb-webs. We describe for the first time in detail the web construction behaviour of Achaearanea tepidariorum , Latrodectus geometricus , Theridion sisyphium and T. varians as well as webs of a range of other theridiids. In our survey we distinguish four major web types. Among webs with gumfooted lines, we distinguish between webs with a central retreat ( Achaearanea -type) and those with a peripheral retreat ( Latrodectus -type). Among webs without gumfooted lines, we distinguish between those which contain viscid silk ( Theridion -type) and those with a sheet-like structure, which do not ( Coleosoma -type). Theridiid gumfoot-webs consist of frame lines that anchor them to surroundings and support threads which possess viscid silk. Building of gumfooted lines constitutes a unique stereotyped behaviour and is most probably homologous for Nesticidae and Theridiidae. Webs remained in place for extended periods and were expanded and repaired, but no regular pattern of replacement was observed. We suggest that the cost of producing and maintaining viscid silk might have led to web reduction, at least in theridiids.  © 2003 The Linnean Society of London. Biological Journal of the Linnean Society , 2003, 78 , 293−305.     

Functionally independent components of prey capture are architecturally constrained in spider orb webs

Evolutionary conflict in trait performance under different ecological contexts is common, but may also arise from functional coupling between traits operating within the same context. Orb webs first intercept and then retain insects long enough to be attacked by spiders. Improving either function increases prey capture and they are largely determined by different aspects of web architecture. We manipulated the mesh width of orbs to investigate its effect, along with web size, on prey capture by spiders and found that they functioned independently. Probability of prey capture increased with web size but was not affected by mesh width. Conversely, spiders on narrow-meshed webs were almost three times more likely to capture energetically profitable large insects, which demand greater prey retention. Yet, the two functions are still constrained during web spinning because increasing mesh width maximizes web size and hence interception, while retention is improved by decreasing mesh width because more silk adheres to insects. The architectural coupling between prey interception and retention has probably played a key role in both the macroevolution of orb web shape and the expression of plasticity in the spinning behaviours of spiders.     

Responses of the Toad Bufo bufo (L.) to Stationary Prey Stimuli1

In the present work toads (Bufo bufo) are shown to respond with prey catching to stationary dummies without previous or accompanying visual or olfactory stimulation. The subjects very rarely showed jerky head movements which, therefore, cannot be necessary for perception of stationary objects. Size preference with respect to stationary stimuli is about the same as in experiments with moving stimuli. However, differences exist between the effects of stationary and moving stimuli with respect to shape and orientation. If a square measuring 10 times 10 mm and a rectangle measuring 5 times 20 mm, oriented either horizontally or vertically, are presented within the frontal-vertical plane, the square is preferred to the rectangles, and among these the horizontal rectangle is to the vertical one. This latter preference is due to the negative effect of the vertical extension: If the vertical rectangle is reduced in length, it becomes more effective as compared to the horizontal rectangle. In the horizontal (X-Z) plane the square and the rectangle oriented parallel to the Z-axis are equally superior to the bar oriented parallel to the X-axis. At presentation of a pair of stimuli in both planes, the one in the frontal-vertical plane is always preferred to that in the horizontal plane. Correspondences and differences of these results to those from experiments with moving prey dummies are discussed.     

Prey attraction as a possible function of the silk decoration of the uloborid spider Octonoba sybotides

Both laboratory experiments and field observations were usedto examine the prey-attraction hypothesis for the function ofthe silk decoration on the orb web of Octonoba sybotides. Thereflectance spectrum of the decorative silk showed that thedecorations reflect relatively more ultraviolet (UV) light.Choice experiments were conducted using Drosophila melanogaster,a common prey species of the spider, to determine whether webswith silk decoration attract more flies than undecorated webs.The choice experiment showed that webs with silk decorationattract more flies in light that includes UV rays. However,flies choose their flight direction randomly in light withoutUV rays. This suggests that the silk decoration might attract preyinsects that tend to fly toward UV-reflecting objects. Fieldobservations comparing the prey capture rate between webs withand without a silk decoration showed that more prey are caughtin decorated webs. In this study, no difference between thetwo forms of silk decoration, linear and spiral, was detectedeither in prey attraction in the choice experiment or in theprey capture rate in the field observations.     

Upside-down spiders build upside-down orb webs: web asymmetry,spider orientation and running speed in Cyclosa

Almost all spiders building vertical orb webs face downwards when sitting on the hubs of their webs, and their webs exhibit an up–down size asymmetry, with the lower part of the capture area being larger than the upper. However, spiders of the genus Cyclosa, which all build vertical orb webs, exhibit inter- and intraspecific variation in orientation. In particular, Cyclosa ginnaga and C. argenteoalba always face upwards, and C. octotuberculata always face downwards, whereas some C. confusa face upwards and others face downwards or even sideways. These spiders provide a unique opportunity to examine why most spiders face downwards and have asymmetrical webs. We found that upward-facing spiders had upside-down webs with larger upper parts, downward-facing spiders had normal webs with larger lower parts and sideways-facing spiders had more symmetrical webs. Downward-facing C. confusa spiders were larger than upward- and sideways-facing individuals. We also found that during prey attacks, downward-facing spiders ran significantly faster downwards than upwards, which was not the case in upward-facing spiders. These results suggest that the spider''s orientation at the hub and web asymmetry enhance its foraging efficiency by minimizing the time to reach prey trapped in the web.